Construction method Product List and Ranking from 1593 Manufacturers, Suppliers and Companies

Last Updated： Aggregation Period:Oct 22, 2025～Nov 18, 2025
This ranking is based on the number of page views on our site.

Construction method Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Oct 22, 2025～Nov 18, 2025
This ranking is based on the number of page views on our site.

  1. Taiyo Kisokogyo Co.,Ltd. Aichi//General contractors and subcontractors
  2. 水研 Shiga//Building materials, supplies and fixtures manufacturers
  3. null/null
  4. 4 三晃金属工業 Tokyo//General contractors and subcontractors
  5. 5 エスケー化研 Osaka//Building materials, supplies and fixtures manufacturers
Go to Company Ranking

Construction method Product ranking

Last Updated： Aggregation Period:Oct 22, 2025～Nov 18, 2025
This ranking is based on the number of page views on our site.

  1. Install the valve without stopping the water! 'EM Continuous Water Valve Method' 水研
  2. Hybrid Concrete Reinforcement Method "Solid Remain Alpha"
  3. Support for bridge pier reinforcement nationwide: "Temporary Closure LPF Method" 日本海洋サービス 大阪支店
  4. 4 Gradient Construction Method for Residential Exterior Walls "KF Gradient Method" ＫＦケミカル
  5. 5 Reinforcement of existing beam after hole cutting: "Redouble Method" コンステック

Construction method Product List

1126～1140 item / All 4218 items

Displayed results
Road Surface Maintenance Method "Heat Dressing Method"

Road Surface Maintenance Method "Heat Dressing Method"

Economical and environmentally friendly! Introduction to maintenance methods for asphalt pavement using surface recycling techniques.

The "Heat Dressing Method" is an economical and environmentally friendly pavement maintenance technique aimed at asphalt pavements that have developed cracks or ruts. By applying this method preventively while the pavement damage is still minor, an extension of the pavement's lifespan can be expected. This method is also applicable to municipal roads, parking lots, and farm roads. 【Features】 ■ Flat and easy-to-drive surface ■ Low CO2 emissions ■ Preventive repair method ■ No waste generated ■ Low construction costs *For more details, please refer to the PDF materials or feel free to contact us.

  • Renovation and repair methods
  • Pavement construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
TechnoNet Corporation Business Introduction

TechnoNet Corporation Business Introduction

Comprehensive Maintenance of Underground Tanks Listening to the Voice of the Earth

TechnoNet Co., Ltd. is a company primarily engaged in leak inspection services for underground tank hazardous material facilities. Our company aims to be a comprehensive maintenance manufacturer for underground tank facilities, achieving high precision and low prices, mainly in the Tokai region. Moving forward, we will continue to contribute to the preservation of the global environment by providing as much satisfaction as possible through our genuine service focused on our customers' future, via inspection, certification, investigation, and improvement projects. 【Business Activities】 ■ Leak inspection services for underground tank hazardous material facilities ■ Tank truck airtight pressure testing ■ Underground tank circulation cleaning/intrusive cleaning ■ Measuring instrument flow calibration/measuring instrument repair and maintenance ■ FRP lining construction, etc. *For more details, please refer to our catalog or feel free to contact us.

  • Geological Survey
  • Environmental Survey

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FRP lining method "SST3-Dual Wall"

FRP lining method "SST3-Dual Wall"

A structure that realizes a future-oriented tank lining. It can eliminate concerns about leakage accidents in one go.

The "SST3 Double Wall" is a future-oriented tank lining that utilizes existing single-shell tanks by converting the interior into a double shell and incorporating a leakage detection system into a newly established detection layer. With the realization of a constant monitoring system through the leakage detection system, it has become possible to operate facilities with higher safety. Additionally, by adopting the tank lining system with an integrated leakage detection layer, it will be possible to detect minor leaks before they lead to soil contamination incidents. [Features] ■ Constant monitoring of leaks is possible ■ The double wall lining structure eliminates concerns about leakage accidents ■ High cost-effectiveness and durability ■ Installation by WALFTANK Corporation *For more details, please refer to the PDF materials or feel free to contact us.

  • Special Construction Method
  • Renovation and repair methods

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tough Mesh Method (R)

Tough Mesh Method (R)

Improvements to the sheet have achieved cost reduction and weight reduction. It is possible to reduce the work processes and shorten the construction period.

This technology is a one-step concrete spalling prevention method. It is an extremely simple method that involves simply applying a "Tough Mesh Sheet" with an adhesive to the repair areas of the concrete structure. As a result, it can shorten the duration of road restrictions and railway closures, thereby reducing the impact on traffic. Additionally, it is partially transparent, allowing for monitoring of the concrete surface over time. 【Features】 ■ Good workability ■ After surface preparation, only adhesive application and fiber sheet attachment/deairing are required ■ Possible to shorten construction time ■ Can stabilize construction quality ■ Partially transparent, allowing for monitoring of the concrete surface over time *For more details, please refer to the PDF materials or feel free to contact us.

  • Concrete construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
SC plate method (Type F)

SC plate method (Type F)

A tunnel collapse prevention method that simply fixes a resin board with anchors.

The "SC Plate Method (Type F)" is a construction method primarily used for preventing spalling at the joints of tunnel linings where there is water leakage. By simply attaching a resin board, which is similar to insulation material, with anchors, it is possible to implement measures against spalling and prevent icicles in cold regions. 【Features】 - The board is lightweight, making installation easy. - It has moderate flexibility, allowing good conformity to the tunnel lining surface. - It can be easily cut, allowing for notching on-site. - The board is alkali-resistant (pH 14, 30-day immersion), eliminating concerns about deterioration due to efflorescence. - The addition of non-combustible paper improves flame resistance and self-extinguishing properties. *For more details, please refer to the PDF document or feel free to contact us.*

  • Concrete construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
STU Clear Sheet - S Method

STU Clear Sheet - S Method

A simplified process for preventing peeling by simply adhering a transparent sheet with adhesive material [NETIS registration number: KT-230146-A].

The STU clear sheet - S method is a simplified process for preventing peeling by simply adhering a transparent sheet with an adhesive. The adhesive used is classified as a designated combustible material rather than a hazardous substance under fire safety laws, enhancing safety against fires. 【Features】 ■ Uniform quality ■ Transparent, allowing visibility of the structure ■ Quick installation ■ Non-hazardous materials *For more details, please refer to the PDF document or feel free to contact us.

  • Concrete construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tough Sheet Method (R)

Tough Sheet Method (R)

Tunnel lining repair method using ultraviolet-curing FRP sheets.

The Tough Sheet Method involves attaching a tough sheet to the existing lining surface of a tunnel to prevent the detachment of concrete fragments and other materials. The tough sheet is soft and easy to handle before curing, and it cures after being exposed to ultraviolet light for about 20 minutes once applied to the construction area. Therefore, compared to conventional repair methods, it allows for extensive work to be completed in a short time, making it an ideal method for construction in locations with time constraints, such as railway and road tunnels. 【Features】 ■ Excellent detachment prevention effect ■ Fewer construction steps ■ Quick sheet curing ■ Transparent material ■ Flexibly conforms to the substrate *For more details, please refer to the PDF document or feel free to contact us.

  • Concrete construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-intensity thin-skin reinforcement method

High-intensity thin-skin reinforcement method

Thin-walled tunnel lining inward reinforcement method

The high-strength thin-shell reinforcement method uses a composite material that combines short-fiber reinforced mortar, which excels in compressive strength and compressive ductility, with continuous fiber mesh as tensile reinforcement, allowing for a thin reinforcement layer that can accommodate areas with limited internal cross-section. *This method was developed in collaboration with the Public Works Research Institute and Kuraray Co., Ltd.* 【Features】 ■ Cost reduction ■ Reduced load on general traffic ■ Easy construction method ■ High design flexibility *For more details, please refer to the PDF document or feel free to contact us.*

  • Concrete construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Introduction to the "Discharge Fragmentation Method" Technology

Introduction to the "Discharge Fragmentation Method" Technology

A new rock and concrete crushing technology using electricity and self-reactive liquids!

The "Electric Discharge Fragmentation Method" is a technology that generates shock waves similar to explosives using electrical power, allowing for efficient fragmentation of rock formations and concrete. It can achieve safe and rapid fragmentation with minimal power consumption. Additionally, it produces low noise, making it suitable for construction in urban areas and indoors. The "Electric Discharge Shock Generation Device" can be mounted on a van, offering excellent portability and transportability. 【Features】 - No use of explosives - Control over destructive power, noise, and vibration - Usable in narrow sites and indoors - Safe and rapid - Capable of fragmentation with minimal power consumption *For more details, please refer to the catalog or feel free to contact us.

  • Special Construction Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Construction method "KK Sheet Method"

Construction method "KK Sheet Method"

A concrete vertical joint construction method that improves workability and quality!

The "KK Sheet Method" is a construction method that uses an embossed resin sheet with rigid irregularities. It allows for uniform joint treatment, achieving strength equal to or greater than that of traditional methods. Additionally, it does not generate noise, dust, or contaminated water, contributing to the preservation of work and surrounding environments. Furthermore, one of its features is the ability to ensure more stable quality compared to conventional methods. 【Features】 ■ Obtained construction technology examination certification ■ NETIS semi-recommended technology ■ Ensures joint strength and improves durability *For more details, please refer to the catalog or feel free to contact us.

  • Wood panel and frame wall construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Metalworking method "Presetter SU"

Metalworking method "Presetter SU"

Double the ease of use with the <Single Unit> hardware construction method!

The "Presetter SU" is a one-piece hardware method that attaches only to the receiving side's columns (beams). It accommodates climbing beams up to 10 inches and hybrid beams made from Chinese timber. Additionally, by being a one-piece design and reducing size and weight, it achieves a lower price compared to the Presetter. The reduced number of drift pins also helps to keep the overall hardware costs down. 【Features】 ■ 35% reduction in hardware installation time for precut companies ■ Low cost ■ Compact and lightweight ■ Minimal cross-section loss of beams ■ Reduction of waste, etc. *For more details, please download the PDF or feel free to contact us.

  • Support hardware/opening hardware
  • Special Construction Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wood fiber insulation material "Steico Flex 038"

Wood fiber insulation material "Steico Flex 038"

It's like the comfort of living in a forest. It protects your life from the discomfort of summer.

"Stykoflex 038" is an interior filling insulation material that is strong in summer insulation. The notable feature is its high thermal capacity among various insulation materials. It boasts a high density and heat storage capacity of approximately 50 kg/m³. Additionally, this product excels in soundproofing and noise reduction. It strongly adheres to various surfaces and eliminates gaps, effectively blocking external sounds. [Features] - Thermal capacity that shuts out the summer heat - Very slow thermal diffusion - Prevents summer humidity and winter condensation - Made from wood, free of harmful chemicals - EPD certified *For more details, please refer to the PDF document or feel free to contact us.*

  • Insulation work

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
The dwelling of the healer.

The dwelling of the healer.

Unique technology that suppresses oxidation! Please achieve a healthy and comfortable life in a living environment that is less prone to "rust."

The "Iyashiro no Sumai" improves residential environments with excessive active oxygen through a unique combination of technologies that suppress oxidation. Just as iron rusts, the human body also "rusts," leading to the promotion of disease and aging. One of the "Four Principles of Healthy Housing," the "Antioxidant Measures," mitigates the effects of active oxygen, creating an environment that is less prone to "rusting." 【Four Principles of Healthy Housing】 ■ Enhance thermal properties ■ Focus on natural materials ■ Implement antioxidant measures ■ Design for health and comfort *For more details, please refer to the PDF document or feel free to contact us.

  • Residential interior systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tn-p method (Tunnel backfill repair polyurethane injection method)

Tn-p method (Tunnel backfill repair polyurethane injection method)

A tunnel repair method that does not use any fluorocarbons! All materials and equipment can be loaded onto a 4-ton truck.

This technology is a polyurethane injection method for tunnel backfill repair that takes the environment into consideration and excels in workability. The injection equipment is very compact, and the filling material is transported in a liquid state, occupying about 1/40 to 1/12 of its volume after foaming, allowing all necessary materials to be loaded onto a single 4-ton truck. It can foam and cure even in areas where water has accumulated, making it effective for groundwater stoppage. Additionally, no chlorofluorocarbons, which contribute to ozone layer depletion and global warming, are used in the foaming agent. 【Features】 ■ Excellent workability ■ Lightweight ■ Cost-effective ■ Environmentally friendly ■ Can foam and cure even in areas where water has accumulated, effective for groundwater stoppage *For more details, please refer to the PDF document or feel free to contact us.

  • Tunnel construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cosmetic Exposed Aggregate Concrete Ultra-Durable Protection System 'RC-PN System'

Cosmetic Exposed Aggregate Concrete Ultra-Durable Protection System 'RC-PN System'

A system developed solely for exposed concrete finishes.

The "RC-PN System" encompasses the essential know-how for achieving exposed concrete finishes, specializing in exposed concrete finishes backed by experience and proven results. You can choose from three types: a fluororesin finish that boasts extremely high durability, an acrylic silicone resin finish that offers durability while excelling in cost performance, and an acrylic resin finish that is ideal for areas where light resistance is less critical, such as interiors. Our experienced technical staff guarantees a natural finish. Please feel free to consult us. 【Features】 ■ Excellent protective performance ■ Natural finish ■ Proposals for the best construction methods according to the situation *For more details, please refer to the catalog or feel free to contact us.

  • Concrete construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Construction method

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.