Construction method Product List and Ranking from 1582 Manufacturers, Suppliers and Companies | IPROS

Last Updated： Aggregation Period:Jun 03, 2026～Jun 30, 2026
This ranking is based on the number of page views on our site.

Construction method Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Jun 03, 2026～Jun 30, 2026
This ranking is based on the number of page views on our site.

  1. Taiyo Kisokogyo Co.,Ltd. Aichi//General contractors and subcontractors
  2. シーカ・ジャパン Tokyo//Building materials, supplies and fixtures manufacturers
  3. エコ・24 本社 Kanagawa//Other construction industries
  4. 4 昭石化工 Tokyo//Building materials, supplies and fixtures manufacturers
  5. 5 横山基礎工事 Hyogo//General contractors and subcontractors
Go to Company Ranking

Construction method Product ranking

Last Updated： Aggregation Period:Jun 03, 2026～Jun 30, 2026
This ranking is based on the number of page views on our site.

  1. 煙突に対するアスベスト封じ込め工法『CAS工法』 エコ・24 本社
  2. Install the valve without stopping the water! 'EM Continuous Water Valve Method' SUIKEN Co., LTD
  3. Reinforcement of existing beam after hole cutting: "Redouble Method" コンステック
  4. 4 DominoZone A new termite control method that does not involve applying chemicals under the floor. Envu エンバイロサイエンスジャパン
  5. 5 For deep excavation work and cutting/removal of underground obstacles! Super Top Method. Taiyo Kisokogyo Co.,Ltd.

Construction method Product List

2791～2820 item / All 4288 items

Displayed results
If the construction work stops! 'Milling Mall Method'

If the construction work stops! 'Milling Mall Method'

[NETIS Registered] No worries even with obstacles! A mud-based thrusting method equipped with four special features!

The "Milling Mall Method" is a thrusting method composed of three devices: a "boring machine," a "special telescopic pipe," and a "special injection pipe." The boring machine is equipped with a specialized bit for cutting through obstacles and a transmitting/receiving coil for obstacle detection. If an obstacle is present during the excavation thrust, the boring machine cutter is pressed against the obstacle at ultra-low speed by the special telescopic pipe, and cutting is performed by the rotation of the cutter. Additionally, the special injection pipe is equipped with facilities for ground improvement before and after the obstacle, as well as an "electromagnetic wave guidance system" to accurately guide the boring machine to its destination. **[Four Special Functions]** - **Detection:** Detecting metal obstacles in front while thrusting and excavating. - **Improvement:** Ground improvement from within the boring machine before and after the obstacle. - **Cutting:** Crushing and discharging metal obstacles. - **Guidance:** Guiding the boring machine to the designated position. For more details, please refer to the catalog or feel free to contact us.

  • Site and ground investigation
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Small-diameter long-distance curved propulsion (slurry method project) "JAT method"

Small-diameter long-distance curved propulsion (slurry method project) "JAT method"

Leave the construction of long distances and sharp curves in small-diameter propulsion to the jet method!

The "JAT Method" is a thrusting method that enables long-distance and sharp curve construction in small-diameter thrusting. Instead of measurements from the ground, it uses a CCD camera sensor for underground surveying from the starting pile, which means it is not affected by buried objects, electric wires, or tracks. The method for curve measurement involves inserting multiple CCD camera sensors into the pipe and measuring targets located at the front and back of the machine with the CCD camera sensors. The image information sent from the sensors is processed by a PC on the ground to quickly calculate the discrepancies between the plan and the construction. [Features] ■ Compatible with deep thrusting ■ Simple structure and easy handling ■ Three-dimensional traverse surveying using high-resolution CCD camera sensors ■ Roll conveyor rail (patented) ■ Capable of handling a wide range of soil types *For more details, please refer to the PDF or feel free to contact us.

  • Sewerage facilities
  • Waste treatment facilities
  • Site and ground investigation
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
All-soil compatible small-diameter mud-water / earth pressure thrusting method "Cobra Method"

All-soil compatible small-diameter mud-water / earth pressure thrusting method "Cobra Method"

A leading conductor with a wide range of soil adaptability and high torque performance! Construction in a small shaft for a wide variety of ground conditions!

The "Cobra Method" is a revolutionary small-diameter thrusting method that can be used to construct from ordinary soil to boulders and bedrock using a small shaft. The unique joint pipes within the Cobra thrusting pipe prevent rolling and respond to unexpected ground conditions that could pull the tunneling machine out, allowing for high-precision construction. Furthermore, even in challenging ground conditions, it is possible to achieve thrusting distances of approximately 200 meters. Additionally, all components, including a compact mud-water treatment system that can be mounted on vehicles and a disassemblable main body, are designed to be small and space-saving, allowing for retrieval from manholes. 【Features】 ■ High torque performance with a wide range of soil adaptability ■ Realization of smaller shafts ■ Improved convenience for retrieval with a four-part tunneling machine ■ Capable of thrusting approximately 200 meters in harsh ground conditions (with applicable conditions) ■ Ability to select excavation methods according to soil type *For more details, please feel free to contact us.

  • Drilling Machine
  • Civil Engineering Company
  • Sewerage facilities
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Special Functions of the Milling Mall Method: 'Exploration' and 'Improvement'

Special Functions of the Milling Mall Method: 'Exploration' and 'Improvement'

No worries even if obstacles appear! The ultimate mud-based propulsion method equipped with special features.

The underground obstacle-responsive mud-based thrusting method "Milling Mall Method" explores while pushing forward the metal obstacles ahead of the thrusting cutter. If obstacles are present during excavation, it is possible to detect obstacles approximately 2 meters ahead of the tunneling machine. Additionally, this method allows for ground improvement from inside the tunneling machine both before and after the obstacle. Since cutting through obstacles takes time, the surrounding ground may loosen, potentially affecting nearby underground installations and causing subsidence or uplift on the surface, making ground improvement necessary. The Milling Mall is designed to allow construction from within the tunneling machine in case ground improvement from the surface is not possible. 【Features】 ■ Exploration while pushing forward the metal obstacles ahead of the thrusting cutter ■ Ground improvement from inside the tunneling machine both before and after the obstacle *For more details, please refer to the PDF document or feel free to contact us.

  • Site and ground investigation
  • Civil Engineering Method
  • Special Construction Method
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Special Functions of the Milling Mall Method: 'Cutting' and 'Guidance'

Special Functions of the Milling Mall Method: 'Cutting' and 'Guidance'

No worries even if obstacles appear! The ultimate mud-based propulsion method equipped with special features.

The underground obstacle-responsive mud-based thrusting method "Milling Mole Method" consists of three devices: a tunneling machine, a special telescopic pipe, and a special injection pipe, which pulverizes and discharges metal obstacles. The special telescopic pipe is used during the cutting of obstacles, allowing the tunneling machine to be pressed against the obstacle and cut at ultra-low speed. The special injection pipe is equipped with facilities for ground improvement at the front of the tunneling machine or the back of the obstacle. Additionally, this method can guide the tunneling machine to the designated position of the vertical shaft. A receiving coil is installed at the designated position inside the arrival shaft, and a system is in place to guide the tunneling machine to that position. Measurements are taken approximately 40 meters before arrival, and the orientation angle of the tunneling machine is calculated and displayed in real-time. [Features] ■ Pulverizes and discharges metal obstacles ■ Guides the tunneling machine to the designated position of the vertical shaft *For more details, please refer to the PDF document or feel free to contact us.

  • Site and ground investigation
  • Civil Engineering Method
  • Special Construction Method
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Underground Obstacle-Compatible Slurry Shield Tunneling Method [Milling Mole Method]

Underground Obstacle-Compatible Slurry Shield Tunneling Method [Milling Mole Method]

Eliminate the problems of underground obstacles. The milling mole method allows for the exploration, cutting, improvement, and guidance of obstacles while advancing.

One of the concerns in construction work is underground.

  • Solid wood flooring/indoor
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Subsurface Obstacle Adaptable Slurry Shield Tunneling Method *Performance Collection by Obstacle Type Available!

Subsurface Obstacle Adaptable Slurry Shield Tunneling Method *Performance Collection by Obstacle Type Available!

The milling mall method is safe even when obstacles appear! A thrust method chosen nationwide, compatible with diameters from φ800 to 3000 mm. *Registered with NETIS.

The underground obstacle response type mud-based thrusting method "Milling Mole Method," equipped with four special functions: exploration, improvement, cutting, and guidance, consists of three devices: a tunneling machine, a special telescopic pipe, and a special injection pipe, allowing for the fine cutting and discharge of underground obstacles. Using electromagnetic waves, it explores metal obstacles ahead while thrusting and can also improve the ground from within the tunneling machine before and after the detected obstacles. In the event that an obstacle is detected, the special telescopic device can be used to cut through the underground obstacle at ultra-low speed, allowing for continued thrusting. Furthermore, a system is also equipped to guide the tunneling machine to a designated position by installing a receiving coil at the specified location within the arrival shaft, enabling high-precision arrival even in the presence of obstacles. 【Performance by Obstacle Type】 ■CASE-6 Steel Sheet Pile 3W Cutting ■CASE-7 Steel Sheet Pile 3 & H Steel Cutting ■CASE-8 Wooden Pile & Steel Sheet Pile Cutting ■CASE-9 H Steel & Existing Manhole Wall Cutting ■CASE-10 Underground Continuous Wall & Metal Object Cutting *For more details, please refer to the PDF document or feel free to contact us.

  • Site and ground investigation
  • Civil Engineering Method
  • Special Construction Method
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Milling mall method: Shield arrival construction case study

Milling mall method: Shield arrival construction case study

Introducing a case study of shield arrival construction using the milling mall method!

The "Milling Mole Method," equipped with four special functions: exploration, improvement, cutting, and guidance, is a ground obstacle response type mud-based thrusting method. It consists of three devices: a tunneling machine, a special telescopic pipe, and a special injection pipe, allowing for the precise cutting and removal of underground obstacles. In the construction of the inflow pipe sewer system for the second Nakagawa Chubu rainwater adjustment pond, the Milling Mole Method was used to carry out the shield arrival work. Milling cutting length: The assembly precision of the steel formwork at the arrival section inside the existing shield, L=1.520m from the outer circumference of the existing shield, was excellent, and there were no leaks of groundwater or muddy water during the placement of fluidized treated soil or during the shield cutting with the tunneling machine, allowing for safe cutting. 【Construction Example】 ■Location: Nagoya City, Aichi Prefecture ■Client: Nagoya City Waterworks Bureau ■Contractor: Asanuma Corporation ■Nominal Diameter: φ2200mm ■Thrusting Length: 101.520m ■Underground Obstacles: Direct access to the existing shield Inner diameter of the existing shield φ3750mm *For more details, please refer to the PDF document or feel free to contact us.

  • Special Construction Method
  • others
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Underground Obstacle-Responsive Slurry Shield Tunneling Method "Milling Mall Method"

Underground Obstacle-Responsive Slurry Shield Tunneling Method "Milling Mall Method"

It is possible to directly reach the existing shield through the application of metal cutting technology! We are currently presenting examples of construction where direct cutting was performed on existing shields.

The "Milling Mole Method" is equipped with a specialized bit designed for cutting through obstacles using a tunneling machine. It allows the cutter of the tunneling machine to make ultra-low-speed contact with obstacles through a special telescopic pipe, enabling cutting through the rotation of the cutter. This operates on the same principle as lathe machining. A significant feature of this construction using the "Milling Mole Method" is that it achieved direct cutting of steel segments without performing mirror cutting. Since improvements to the protective measures of the existing shield section could not be made from the surface, a boring machine was mounted, allowing for injection from within the tunneling machine (using a dual-pipe strainer method with multiple phases). Additionally, a formwork for cutting connection was installed inside the existing shield, and fluidized treatment soil was placed, allowing for direct cutting at ultra-low speeds and safely avoiding the risks of water inflow and subsidence accidents that occur during mirror cutting. Previously, mirror cutting was performed from within the shield, raising concerns from customers about the risks to the surrounding environment due to groundwater inflow and ground collapse associated with that construction. We proposed direct cutting of the existing shield, and after executing the construction, we successfully reached the target without affecting water inflow or the surrounding environment, resulting in great satisfaction from the client! 《You can download the construction case from the PDF below!》

  • Special Construction Method
  • Sewerage facilities
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Reinforced Steel Welded Joint New NT Method

Reinforced Steel Welded Joint New NT Method

Flexible response to the diversification of civil engineering and construction technology! It is a welding joint method for reinforcing bars.

The new NT construction method is a welding joint method for rebar using a semi-automatic carbon dioxide arc welding technique with a joint sleeve. The joint sleeve is made by bending steel materials into a semicircular shape, which allows for the alignment of the axes of the rebar and, through the function of filling the welded metal as a backing, enables the construction of welding joints with high strength and reliability. Due to the compactness of the construction equipment, it can adapt to various construction conditions in both civil engineering and architecture. 【Features】 ○ Semi-automatic carbon dioxide arc welding method ○ Reliable quality of welding joints ○ Versatility that does not depend on the construction site ○ Ideal for industrialized construction methods ○ Ultrasonic testing of the weld area is possible For more details, please contact us or download the catalog.

  • Steel
  • Reinforcement and repair materials
  • Steel construction
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Introduction to the Bontelran Method Case Studies

Introduction to the Bontelran Method Case Studies

All the necessary work required by conventional methods is eliminated! Introduction of case studies on the Bontelan method, which significantly reduces costs.

The "Bontoran Method" is a technique that allows for the recycling of ground materials by improving soft soil on-site, adding functions such as earthquake resistance. It does not require special equipment; improvement can be achieved simply by attaching a mixing attachment to an excavator. In the "Hamao District Embankment Construction," soft sludge-like soil was generated within a retention basin, and after considering recycling methods, this technique was adopted, leading to the completion of the river embankment in December 2002. There are various other construction examples, including the "Haga Pond District Development Project" and the "Torigo District Road Improvement Project." 【Construction Examples】 ■ Hamao District Embankment Construction (2002) ■ Improvement of National Route 458 (Agricultural Road Culvert) ■ Haga Pond District Development Project ■ Oami Central District Wide-Area Agricultural Land Development Project, Section 1 ■ Torigo District Road Improvement Project ■ Ichinichiya District and other embankment projects *For more details, please refer to the PDF document or feel free to contact us.

  • Earthworks
  • Pile and foundation work
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Water jet method

Water jet method

Safer construction is possible! It is a method with low running costs and high effectiveness.

The "water jet method" is a construction technique that operates solely using the power of water, eliminating the need for chemicals and resulting in low running costs while being highly effective. Okitsuma Construction Co., Ltd. has introduced semi-automatic robots, enabling safer construction. Delicate areas that require fine adjustments can be handled by human skills, and the balance of work with semi-automatic robot construction has achieved safer and more efficient construction than ever before. 【Features】 ○ Used for chipping, roughening, and substrate adjustment at construction sites ○ Does not create fine cracks (micro-cracks) in the base material ○ Can be processed while ensuring appropriate adhesion strength For more details, please contact us or download the catalog.

  • Turbid water and muddy water treatment machines
  • Wood processing
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Construction Achievements] Sto Dry Spray Method Bridge Repair Contract

[Construction Achievements] Sto Dry Spray Method Bridge Repair Contract

[Bridge Repair Business Commission] High-level technology and quality! Nearly 40 years of experience with polymer cement dry spraying method.

The "Sto Dry Spray Application Method" was developed in Germany, a leading country in concrete repair technology, and is a dry spraying method using premixed polymer cement mortar with nearly 40 years of proven performance in Europe. Just before the factory-produced premixed polymer cement mortar, which is composed of cement, aggregates, polymers, and fibers in predetermined ratios, is sprayed, an appropriate amount of water is supplied, and the material is compacted by the impact force of air pressure. This allows for the formation of a cement mortar that meets the required performance for cross-section repair materials. 【Features】 ○ Can supply high-quality materials consistently ○ No need for a material stockyard ○ Construction possible under traffic vibrations ○ Rebound material has very little moisture and is easy to handle ○ No generation of wash water from equipment or packaging dust, considering environmental aspects For more details, please contact us or download the catalog.

  • Reinforcement and repair materials
  • Renovation and repair methods
  • Wood processing
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Construction Achievements: Sto Dry Spray Method - Itaya Bridge

Construction Achievements: Sto Dry Spray Method - Itaya Bridge

Ibatayabashi: High-level technology and quality! Nearly 40 years of experience in polymer cement dry spraying method.

The "Sto Dry Spray Application Method" was developed in Germany, a leading country in concrete repair technology, and is a dry spraying method using premixed polymer cement mortar that has nearly 40 years of proven performance in Europe. Just before the factory-produced premixed polymer cement mortar, which is composed of cement, aggregates, polymers, and fibers in predetermined ratios, is sprayed, an appropriate amount of water is supplied, and the material is compacted by the impact force of air pressure. This allows for the formation of a cement mortar that meets the required performance for cross-section repair materials. 【Features】 ○ Can consistently supply high-quality materials ○ No need for a material stockyard ○ Construction possible under traffic vibrations ○ Rebound material has very little moisture and is easy to handle ○ No generation of wash water from equipment or packaging dust, allowing for environmental consideration For more details, please contact us or download the catalog.

  • Reinforcement and repair materials
  • Renovation and repair methods
  • Wood processing
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Construction Achievements: Sto Dry Spray Method - Ohashi

Construction Achievements: Sto Dry Spray Method - Ohashi

【Ohashi】High-level technology and quality! Nearly 40 years of experience in polymer cement dry spraying method.

The "Sto Dry Spray Application Method" was developed in Germany, a leading country in concrete repair technology, and is a dry spraying method using premixed polymer cement mortar that has nearly 40 years of proven performance in Europe. Just before the factory-produced premixed polymer cement mortar, which is composed of cement, aggregates, polymers, and fibers in predetermined ratios, is sprayed, an appropriate amount of water is supplied, and the materials are compacted by the impact force of air pressure. This allows for the formation of a cement mortar that meets the required performance for cross-section repair materials. 【Features】 ○ Can consistently supply high-quality materials ○ No need for a material stockyard ○ Construction possible under traffic vibrations ○ Rebound material has very little moisture and is easy to handle ○ No generation of wash water from equipment or packaging dust, allowing for environmental consideration For more details, please contact us or download the catalog.

  • Reinforcement and repair materials
  • Renovation and repair methods
  • Wood processing
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Construction Achievements: Sto Dry Spray Method, Sakata Clean Center

Construction Achievements: Sto Dry Spray Method, Sakata Clean Center

Sakata Clean Center: High-level technology and quality! Nearly 40 years of experience in polymer cement dry spraying method.

The "Sto Dry Spray Application Method" was developed in Germany, a leading country in concrete repair technology, and is a dry spraying method using premixed polymer cement mortar that has nearly 40 years of proven performance in Europe. Just before the factory-produced premixed polymer cement mortar, which is composed of cement, aggregates, polymers, and fibers in predetermined ratios, is sprayed, an appropriate amount of water is supplied, and the materials are compacted by the impact force of air pressure. This allows for the formation of a cement mortar that meets the required performance for cross-section repair materials. 【Features】 ○ Can consistently supply high-quality materials ○ No need for a material stockyard ○ Construction is possible under traffic vibrations ○ Rebound material has very little moisture and is easy to handle ○ No generation of wash water from equipment or packaging dust, allowing for environmental considerations For more details, please contact us or download the catalog.

  • Reinforcement and repair materials
  • Renovation and repair methods
  • Wood processing
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Construction Achievement Collection: Sto Dry Spray Method

Construction Achievement Collection: Sto Dry Spray Method

High-level technology and quality! Polymer cement dry spraying method with nearly 40 years of experience.

The "Sto Dry Spray Application Method" was developed in Germany, a leading country in concrete repair technology, and is a dry spraying method using premixed polymer cement mortar with nearly 40 years of proven performance in Europe. Just before the factory-produced premixed polymer cement mortar, which is blended in predetermined ratios of cement, aggregates, polymers, and fibers, is sprayed, an appropriate amount of water is supplied, and the material is compacted by the impact force of air pressure. This allows for the formation of a cement mortar that meets the required performance for cross-section repair materials. 【Features】 ○ Can supply high-quality materials consistently ○ No need for a material stockyard ○ Construction possible under traffic vibrations ○ Rebound material has very little moisture and is easy to handle ○ No wash water from equipment or packaging dust is generated, considering environmental aspects For more details, please contact us or download the catalog.

  • Reinforcement and repair materials
  • Renovation and repair methods
  • Wood processing
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Data] Reinforcement Method "CABOCON Method"

[Data] Reinforcement Method "CABOCON Method"

Just apply it to the surface of the structure! A reinforcement method that allows for easy construction and significantly shortens the construction period.

This document contains information on the characteristics, applications, performance, and physical properties of the reinforcement method "CABOCON Method." The "CABOCON Method" is a reinforcement technique for concrete and steel structures that demonstrates excellent reinforcement effects by bonding high-strength, lightweight CCFP with high-performance epoxy resin adhesive. By bonding CCFP, reinforcement effects equal to or greater than those of steel plate reinforcement can be achieved. Since it does not require chipping into existing structures, driving anchors, or modifying the existing structural cross-section, and does not necessitate installation processing or welding work, there are no issues related to heavy machinery operations, noise, or fire hazards. 【Contents】 ■ Overview ■ Features ■ Applications ■ Performance and Physical Properties ■ Basic Construction Methods ■ Main Construction Achievements *For more details, please refer to the PDF document or feel free to contact us.

  • Reinforcement and repair materials
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Information] Environmentally friendly soil solidification material "Harden"

[Information] Environmentally friendly soil solidification material "Harden"

Introducing an environmentally friendly soil solidification material that effectively utilizes recycled resources!

This document outlines the features and product composition of the environmentally friendly soil solidification material "Harden," handled by EARTH CREATE. "Harden" can be recycled into high-quality improved soil by adding an appropriate amount to the excavated soil, mud, and sludge generated at construction sites and mixing it. Additionally, it eliminates the need for transportation to disposal sites or the transport of new material soil, thereby reducing CO2 emissions. [Contents (excerpt)] ■ Overview ■ Features ■ Harden product composition ■ Improvement principle of Harden ■ Reaction mechanism of Harden *For more details, please refer to the PDF document or feel free to contact us.

  • Paving Materials
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Reinforcement Method "CCFP-CABOCON" (Cabocon Method)

Reinforcement Method "CCFP-CABOCON" (Cabocon Method)

The strength of iron and the lightness of fibers. A construction method that allows reinforcement with concrete, steel, and wood.

The "CCFP-CABOCON (Cabocon Method)" is a new reinforcement and repair technology that uses "carbon fiber," a material commonly known in space-related applications and aircraft structural materials, as well as in golf clubs. It provides excellent reinforcement effects not only for concrete structures and steel structures such as highways and buildings but also for wooden structures. Structures that were difficult to reinforce or repair with steel plates can now be extended to their maximum lifespan. 【Features】 ■ Significantly reduced construction time ■ Maintenance-free ■ Consideration for safety and security ■ Cost reduction ■ Flexible *For more details, please refer to the PDF materials or feel free to contact us.

  • Reinforcement and repair materials
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Reinforcement Method for Bridge Piers with Embedded Reinforcement Bars "AT-P Method"

Reinforcement Method for Bridge Piers with Embedded Reinforcement Bars "AT-P Method"

By significantly reducing the weight increase due to reinforcement, the burden on the foundation structure and the ground is alleviated!

The "AT-P method" is a seismic reinforcement method for bridge piers that minimizes the thickness of the reinforcement layer (minimum 34mm) compared to the RC wrapping method with external reinforcement and the conventional PCM wrapping method. The increase in thickness of the wrapping is reduced to about 1/8 of the RC wrapping method and less than 1/2 of the conventional PCM wrapping method, resulting in almost no increase in the riverbed obstruction rate for bridge pier reinforcement in rivers. Additionally, by directly embedding reinforcement bars into the existing concrete, it is possible to reliably improve load-bearing capacity without increasing the concrete cross-section. 【Features】 ■ The increase in wrapping thickness is reduced to about 1/8 of the RC wrapping method and less than 1/2 of the conventional PCM wrapping method. ■ The riverbed obstruction rate for bridge pier reinforcement in rivers hardly increases. ■ Load-bearing capacity can be reliably improved without increasing the concrete cross-section. ■ The burden on the foundation structure and the ground can be reduced. *For more details, please refer to the PDF document or feel free to contact us.

  • Reinforcement and repair materials
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Data] Evaluation Results of the Utilization Effect of the Truss-Type Gatehouse

[Data] Evaluation Results of the Utilization Effect of the Truss-Type Gatehouse

Introduction of the evaluation results of the utilization effects of the truss-type gatehouse, including features and observations!

This document presents the results of the effectiveness evaluation of the "truss-style sluice gate superstructure" handled by EARTH CREATE. It includes an overview, features, observations, perspectives on future evaluations, and the necessity of evaluations. The "truss-style sluice gate superstructure" is a superstructure for sluices, gates, and conduits, constructed primarily of aluminum alloy and utilizing a truss system for the roof. [Contents] ■ NEITS Information ■ Effectiveness Evaluation ■ Effectiveness Survey Results ■ Need for Follow-up Surveys ■ Follow-up Surveys *For more details, please refer to the PDF document or feel free to contact us.

  • Outdoor storage, living room, and veranda unit
  • Watergate
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Document] Graffiti Removal Cleaning Agent Application Manual

[Document] Graffiti Removal Cleaning Agent Application Manual

Photos before and after construction included! Important notes and safety and health precautions are provided.

This document is the application manual for the graffiti removal cleaning agents 'MT-47' and 'MT-T3'. It includes precautions and safety and health considerations. Additionally, it features photos showcasing the actual use of the products, as well as the conditions before and after application. Please take a moment to read it. 【Contents】 ■ Precautions ■ Safety and health considerations ■ First aid measures ■ Storage methods ■ Disposal methods *For more details, please refer to the PDF document or feel free to contact us.

  • paint
  • others
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Reinforced Soil Method "Revital SE"

Reinforced Soil Method "Revital SE"

Combining high durability and aesthetic appeal! This construction method does not involve on-site pouring and is environmentally friendly, preventing river pollution.

"Livitair SE" is a river area-compatible construction method using the earthquake-resistant reinforced soil technique called Tail Armé. There is no on-site pouring, which prevents pollution of the river. Additionally, it allows for hole processing of about φ250, making it possible for small fish to inhabit, thus considering the environment. Panels cultivated worldwide, combining high durability and aesthetic appeal, provide peace of mind. 【Features】 ■ Durability ■ Environmental friendliness ■ Economic efficiency ■ Aesthetic appeal ■ Safety *For more details, please refer to the PDF materials or feel free to contact us.

  • Renovation and repair methods
  • Earthquake-resistant construction method
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
EPP method

EPP method

Greatly contributes to improving work efficiency, shortening construction periods, and enhancing the work environment! A method using water-based paint stripping agents.

The "EPP method" is a technique that uses a paint stripping agent that causes the paint film to lift simply by applying it to the painted surface, allowing for the quick removal of the paint film. It not only prevents damage to the underlying metal but also improves the efficiency of the stripping process and shortens the construction period. Additionally, being water-based, it can be used safely. There is no need for dust management like with blasting. The tools used can be easily washed off with water, making cleanup simple. 【Features】 ■ Safe and secure ■ Easy post-processing ■ Simple to use ■ Short stripping time ■ Does not damage the underlying metal *For more details, please refer to the PDF document or feel free to contact us.

  • Natural paints (water-based, ink, etc.)
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Over 10 years of anti-corrosion effect! Universal metal repair material - Rustoff

Over 10 years of anti-corrosion effect! Universal metal repair material - Rustoff

Excellent adhesion and corrosion resistance! It can repair damaged or worn areas of equipment.

The Lasstaff 1100 series is a metal repair material composed of metal powder, ceramics, and special polymers. It protects various facilities such as power, gas, water supply and drainage, petroleum, steel, construction, shipbuilding, chemicals, transportation, communications, and paper manufacturing from corrosion and wear for an extended period, reducing maintenance costs. No harmful substances (environmental hormones) are released, and the curing time is approximately 2 hours for 1110 and about 5 to 10 minutes for 1120. The quick curing time reduces the burden on the environment and the effort required. 【Features】 ○ Environmentally friendly and easy to use ○ Applicable to wet surfaces and oil-affected areas ○ High cost performance ○ Resistant to corrosion, wear, and chemicals ○ Excellent insulation and adhesion ● For more details, please contact us or download the catalog.

  • Reinforcement and repair materials
  • Water Supply Facilities
  • stone
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Stainless coat spray type

Stainless coat spray type

Just spray it on stainless steel! Excellent effects for corrosion resistance, rust prevention, and weather resistance!

The "Stainless Coat Spray Type" allows for the formation of a coating of Stainless Coat SUS316-L simply by spraying, and can be used on various materials such as metal, plastic, PVC, wood, stone, and concrete. The leaf-like stainless pigment layers overlap to form a high-density multi-layered coating that completely prevents contact with water and air, protecting against the effects of ultraviolet rays and the atmosphere. 【Lineup】 ■ General Use (PU Type): General-purpose coating that can be widely used for rust prevention and corrosion protection. ■ Decorative Use (SB Type): High decorative finish such as hairline and mirror surface. ■ Heat Resistant (SIL Type): Remarkable heat resistance that withstands high temperatures of up to 650℃. *For more details, please download the PDF or feel free to contact us.

  • Rust Inhibitor
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Rehabilitation Method Comprehensive Catalog

Rehabilitation Method Comprehensive Catalog

Comprehensive catalog of rehabilitation methods. Contains repair techniques for deteriorated concrete structures.

The "Rehabilitation Method Comprehensive Catalog" is a catalog that features repair techniques for concrete structures deteriorated by salt damage, neutralization, and ASR (Alkali-Silica Reaction). The rehabilitation methods include the Rehabilitation Cylinder Method, Rehabilitation Capsule Method, and ASR Lithium Method, which can be selected based on the degree, location, and scale of deterioration. The Rehabilitation Capsule Method is registered with NETIS (Registration Number: CG-120005-A). 【Featured Products】 ○ Simple High-Pressure Injection "Rehabilitation Capsule Method" ○ Repair technology for salt damage, neutralization, and ASR using lithium nitrite "Rehabilitation Method" ○ Penetrating Diffusion Type Lithium Nitrite "Procon 40" (NETIS Registration Number: CG-100022-A) ○ Repair methods for salt damage, neutralization, and ASR using penetrating diffusion type lithium nitrite For more details, please contact us or download the catalog.

  • Reinforcement and repair materials
  • Renovation and repair methods
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Lithium Nitrite Combined Surface Impregnation Method "Procon Guard System"

Lithium Nitrite Combined Surface Impregnation Method "Procon Guard System"

A surface impregnation method using lithium nitrite in combination with the impregnant "Procon Guard," which is primarily composed of lithium silicate!

The "Procon Guard System" is a surface impregnation method that uses lithium nitrite to repair salt damage, neutralization, and ASR (alkali-silica reaction) by densifying the concrete surface and suppressing the intrusion of deterioration factors (chloride ions, carbon dioxide, moisture). In addition to blocking deterioration factors, it also exhibits rust prevention effects on reinforcing steel due to lithium nitrite and suppresses the expansion caused by alkali-silica gel. This method can be applied not only during the latent phase of deterioration but also in stages where reinforcing steel corrosion or ASR expansion is already occurring, such as in the progression phase or early acceleration phase, as a proactive maintenance measure. 【Features】 ■ Suppresses the intrusion of deterioration factors (chloride ions, carbon dioxide, moisture) *For more details, please download the PDF or feel free to contact us.

  • Renovation and repair methods
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Lithium Nitrite Combined Surface Impregnation Method "Procon Guard System S"

Lithium Nitrite Combined Surface Impregnation Method "Procon Guard System S"

A surface impregnation method that combines the effects of blocking deterioration factors, rust prevention for reinforcing steel, and suppressing the expansion of alkali-silica gel, using lithium nitrite!

The "Procon Guard System S" is a surface impregnation method that uses lithium nitrite in combination to form a moisture-proof layer on the surface of concrete, preventing the intrusion of deterioration factors such as moisture, chloride ions, and carbon dioxide. Like other surface impregnation methods, it does not alter the appearance of the concrete and excels in post-construction observation and monitoring. [Features] ■ Suppresses the intrusion of deterioration factors (chloride ions, carbon dioxide, moisture) *For more details, please download the PDF or feel free to contact us.

  • Renovation and repair methods
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Construction method

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.