soft Product List and Ranking from 1804 Manufacturers, Suppliers and Companies | IPROS

Last Updated： Aggregation Period:Jan 28, 2026～Feb 24, 2026
This ranking is based on the number of page views on our site.

soft Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Jan 28, 2026～Feb 24, 2026
This ranking is based on the number of page views on our site.

  1. アークシステム 本社 Kanagawa//others
  2. ユニオンシステム Osaka//Information and Communications
  3. B7 Tokyo//Information and Communications
  4. 4 シスメット 本社/福岡県北九州市　・東日本オフィス/埼玉県入間市　・北日本オフィス/北海道札幌市 Fukuoka//Information and Communications
  5. 5 アクアソフト Okayama//others
Go to Company Ranking

soft Product ranking

Last Updated： Aggregation Period:Jan 28, 2026～Feb 24, 2026
This ranking is based on the number of page views on our site.

  1. Easy operation with just a click" - Drawing extraction software "Hiroi-kun III アークシステム 本社
  2. Quicker and more accurate construction cost estimation! Drawing extraction software Hiroi-kun III アークシステム 本社
  3. [Wave Forecast Information] Weather and Ocean Conditions Comprehensive Portal Site Compass PLUS シスメット 本社/福岡県北九州市　・東日本オフィス/埼玉県入間市　・北日本オフィス/北海道札幌市
  4. 4 From 3,800 yen per month! Drawing extraction software [Hiroi-kun III] アークシステム 本社
  5. 4 Data extraction software "Hiroi-kun III" supports CAD and PDF drawing data. アークシステム 本社

soft Product List

5551～5580 item / All 6394 items

Displayed results
[Time Recorder Integration Example] Installation at the dispatch location for bulk management of staff.

[Time Recorder Integration Example] Installation at the dispatch location for bulk management of staff.

Introducing a case where approximately 650 units were implemented, achieving real-time staff management!

"Green Nuts Plus" is an IC card time recorder that allows real-time management of attendance. Unlike conventional models that required a connection to a PC for detailed settings, this device enables such configurations directly through its touch panel. It is equipped with a human sensor that turns off the screen's backlight to enter power-saving mode if no movement is detected for a specified period. This product has been adopted by a major staffing company for their uniquely developed attendance management system for temporary staff, enabling real-time staff management at client locations. [Case Overview] ■ Installation Site: Major Staffing Company ■ Number of Units Installed: Approximately 650 units ■ Customer Feedback: After setting the instructions provided before shipment, the product can be shipped directly to the customer, allowing for a quick and hassle-free implementation. *For more details, please refer to the related links or feel free to contact us.

  • Attendance management system
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Time Recorder Integration Example] Compatible with MIFARE Cards

[Time Recorder Integration Example] Compatible with MIFARE Cards

Directly linked to the company's attendance system database for use! Introducing a case where meeting attendance management is also conducted.

"Green Nuts Plus" is an IC card time recorder that allows real-time management of attendance. Unlike conventional models that required a connection to a PC for detailed settings, this device enables such configurations directly through its touch panel. It is equipped with a motion sensor that turns off the screen's backlight and activates energy-saving mode if no movement is detected for a specified period. It is used to read employee codes from employee ID cards (MIFARE proprietary format) and collects timestamp data through the web system "MC Electronic Time Card" (customized version), which directly links to the internal attendance system's database (Oracle). [Case Overview] ■ Implementation Site: Consulting Company ■ Customer Feedback: It has received very positive reviews within the company, and there have been requests to use it for attendance confirmation in internal training, leading to additional implementations. *For more details, please refer to the related links or feel free to contact us.

  • Attendance management system
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Data] Shirutoku Report No. 44 #Embedded Software Creation (2)

[Data] Shirutoku Report No. 44 #Embedded Software Creation (2)

Developing with a focus on reliability/quality! Here are some key points for creating embedded software.

★★Shirutoku Report: Useful Information You Can Benefit From★★ In this report, we will discuss the key points when creating embedded software (firmware), specifically about ensuring real-time performance: "Creating it to flow continuously." At WTI, we receive numerous requests for embedded software development from our customers, and we develop with a focus on reliability and quality, including the principle of "flowing continuously." If you are having trouble with software development, please contact WTI. [Contents] ■ Busy Signal ■ Sequential Operation ■ Post-Change Flow *For more details, please refer to the PDF document or feel free to contact us.

  • Other Software
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Data] Shirutoku Report No. 56: Circuit Verification Using #SPICE

[Data] Shirutoku Report No. 56: Circuit Verification Using #SPICE

Introducing circuit verification using 'SPICE' as a countermeasure for problems arising from changes in the characteristics of components.

★★Shirutoku Report: Useful Information You Should Know★★ This report focuses on circuit verification using "SPICE," which allows for various validations. Using a filter as an example, we will present a verification designed to reduce the number of components by modifying the configuration, ensuring that the attenuation characteristics match at 10MHz, illustrated with diagrams. Our company also conducts validity checks of designs through simulations based on customer requests. We encourage you to read on. 【Contents】 ■ Examples of circuit verification using SPICE ■ One-point advice ■ Meaning of commands *For more details, please refer to the PDF document or feel free to contact us.*

  • others
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Introduction to the operation and management screen of [Factory Guardian] and the steps until implementation.

Introduction to the operation and management screen of [Factory Guardian] and the steps until implementation.

Introducing the operation and management screens for analyzing operational status and production progress, as well as the implementation steps!

"Factory Guardian" is an IoT package developed to improve production efficiency and quality in the manufacturing industry. It serves as a portal for monitoring the overall production quantities of the factory, providing easy-to-understand screens for analyzing operational status, production progress, production pitch, and abnormality management for each line and equipment. It also offers good traceability by displaying the history of abnormalities. Additionally, based on the package, we determine the appropriate implementation steps for our customers. [Screen Examples] ■ Overall factory monitoring (portal) ■ Real-time information for lines and equipment ■ Operational status analysis / production progress analysis / production pitch analysis (daily and monthly) ■ Time series information (production numbers, operational status, non-operational status) ■ Abnormality history ■ Abnormality management screen (tracing for 30 days) *For more details, please refer to the PDF document or feel free to contact us.

  • Construction and process management software
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Vehicle Information Platform

Vehicle Information Platform

We will contribute to the creation of the connected services market and the early realization of MaaS!

The "Vehicle Information Service Platform" is a platform product designed for next-generation mobility in the MaaS era. It contributes to the development of next-generation mobility services through a highly abstracted structure that does not require the App/Service to be aware of the development environment and real vehicle execution environment. For more details, please refer to the PDF materials (catalog) or feel free to contact us through our website. https://www.nds-osk.co.jp/contact/form1.html

  • Other Software
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Multi OS Solution

Multi OS Solution

Compensating for Linux's weak real-time performance!

Osaka NDS Muti OS Solution realizes the coexistence of "Linux" and "Real-Time OS" on a multi-core SoC. By having a real-time OS run alongside Linux to handle real-time processing, it ensures reliable real-time performance. This allows for the utilization of the rich software assets of Linux while also enabling real-time processing, such as device control, on a single SoC, leading to simpler hardware design and reduced component costs. For more details, please refer to the PDF materials (catalog) or feel free to contact us through our website. https://www.nds-osk.co.jp/contact/form1.html

  • Other Software
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Vectorworks Architect 2025

Vectorworks Architect 2025

Standalone version Lease monthly fee: 7,400 yen (excluding tax) Reservations now being accepted.

Basic package + Specialized functions for architecture A product for the architecture, interior design, and interior industry equipped with design support functions for the architectural field Introduction to Vectorworks 2025 Standalone Version Usage Form Can be differentiated by environment One license can be installed on two machines. Designers can differentiate usage based on the environment, such as using a desktop in the office and a portable machine for outings. *Only one machine can operate simultaneously. No license authentication or procedures required Startup uses internet authentication. After the initial authentication, it can be used for 90 days even when not connected to the network. *After the initial authentication, if started in an environment connected to the network, authentication will be performed automatically.

  • Architectural CAD
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Easy inventory on your tablet: "Inventory Companion"

Easy inventory on your tablet: "Inventory Companion"

Free trial ongoing! Achieve paperless inventory using a tablet.

Using a tablet, we achieve inventory tasks (from printing slips from the system to inventory and transferring stock back to the system) in a paperless manner. There is a standard template (inventory report) available, so you can start using it immediately after implementation. First, feel free to try the free trial of the cloud version! 【Features】 ■ Significant reduction in time and costs ■ No need for slip printing and sorting tasks ■ No need for transcription tasks ■ Real-time analysis is possible *For more details, please refer to the PDF document or feel free to contact us.

  • Inventory Management System
  • Other Software
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
IEC61850-compliant SCADA 'Mint SCADA'

IEC61850-compliant SCADA 'Mint SCADA'

Achieve Japanese SCADA compatible with multi-vendor IEDs at a low cost.

"Mint SCADA" is an IEC61850-compliant SCADA that achieves cost reduction through its combination with the commercially available SCADA package "JoywatcherSuite." Standardized communication settings make setup and updates easy. There is no need for additional hardware or software for IEC61850 protocol conversion. 【Features】 ■ Supports reading ICD, CID, SCD, and IID files ■ Can configure device information from various vendors, enabling multi-vendor and interoperability ■ Complies with the logical node IEC61400-25 for wind power plants ■ Flexible system construction, supports multiple languages * "JoywatcherSuite" is a package software provided by Tokyo Gas Co., Ltd.

  • Other Software
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Automotive Ignition Plug Simulation "VizSpark"

Automotive Ignition Plug Simulation "VizSpark"

This is simulation software that makes it possible to analyze the arc plasma of automotive spark plugs, which was previously difficult.

VizSpark is an arc plasma simulation software developed by Esgee Technologies in the United States, founded by Professor Raja, an expert in plasma simulation at the University of Texas at Austin. It has the most achievements in the analysis of ignition plugs and circuit breakers, with many cases presented at academic conferences. In Japan, it has a strong track record, particularly among complete vehicle manufacturers and internal combustion engine-related manufacturers, and it supports the analysis of devices such as: - Circuit breakers - Atmospheric pressure discharge - Ignition plugs (spark plugs) - Plasma torches (plasma jets) - Welding - Thermal spraying - High-intensity lamps

  • others
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Thin Fluid Analysis Software for Vacuum Devices 'DSMC-Neutrals'

Thin Fluid Analysis Software for Vacuum Devices 'DSMC-Neutrals'

Analysis of gas flow under low-pressure conditions can be performed. Analysis software that also supports rarefied gases (rarefied fluids).

**Features** - Adopts unstructured mesh, allowing for calculations that directly reflect the complex shapes of actual devices. - High parallel efficiency enables quick computation results even for large-scale shapes. - Utilizes a particle method, ensuring convergence solutions even with poor-quality computational grids, unlike fluid models. - Comprehensive technical support ensures that even those new to simulations or busy with experiments can reliably achieve results. **Supports Various Cases** - Simulation of rarefied gas flow within a vacuum chamber. - Simulation of thin film generation in semiconductor manufacturing. - Simulation of thin film generation in semiconductor manufacturing processes such as Chemical Vapor Deposition (CVD), Organic Light Emitting Diodes (OLED), and Molecular Beam Epitaxy (MBE). **Outputs Various Calculation Results** - Calculation of chemical reactions. - Calculation of chemical reactions from Arrhenius-type reaction data. - Calculation of dissociation, recombination, and molecular (atomic) exchange reactions. - Ability to set multiple reaction equations on the GUI. *For more details, please refer to the catalog or feel free to contact us.*

  • Scientific Calculation and Simulation Software
  • Analysis and prediction system
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Reliability and Safety Assessment Software RWB

Reliability and Safety Assessment Software RWB

Fully compliant with IEC61508 and ISO26262. Certification obtained.

Support from failure rate calculation to report creation in one go! Reliability Workbench is a tool based on reliability engineering used for evaluating and analyzing reliability and safety in accordance with functional safety standards. It has been adopted by many companies both domestically and internationally as a tool for evaluating the reliability and safety of equipment required by functional safety standards such as IEC61508 and ISO26262, with a total of 8,000 sites having implemented it worldwide. The main industries where it has been adopted are as follows: - Automotive - Railways - Aircraft - Plants - Industrial equipment In Japan, many automotive-related companies, including Denso Corporation, as well as railway-related customers such as Japan Signal and Nabtesco, have adopted this tool, with over 50 customers in the automotive and railway sectors alone. Additionally, this tool has the following features that support standardization and simplification of work: - Integration with electronic CAD - Database creation of failure data - Automatic deployment of failure modes and distribution ratios to FMEA - Cross-checking between FMEA and FaultTree+

  • Other Software
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Plasma simulation software "Particle-PLUS"

Plasma simulation software "Particle-PLUS"

"Particle-PLUS" is a plasma and rarefied fluid analysis software that uses the particle method.

"Particle-PLUS" is a simulation software suitable for research, development, and manufacturing of devices and materials using plasma. - It specializes in low-pressure plasma analysis. - It can perform advanced physical model analysis such as CCP and external circuit models. - It excels in plasma simulation for low-pressure gases, where calculations using fluid models are challenging. - It supports 2D (two-dimensional) and 3D (three-dimensional) analysis, efficiently handling complex models. - As a strength of our in-house developed software, it can perform standard CCP and magnetron sputtering calculations, as well as customization to fit the customer's equipment. ◆ Supports various cases ◆ - Magnetron sputtering - PVD, plasma CVD - Capacitively coupled plasma (CCP) - Dielectric barrier discharge (DBD) - Electrophoresis, etc. ◆ Outputs various calculation results ◆ - Potential distribution - Density distribution/temperature distribution/generation distribution of electrons and ions - Particle flux and energy flux to the wall - Energy spectrum of electrons and ions at the wall - Density distribution/temperature distribution/velocity distribution of neutral gas, etc. *For more details, please feel free to contact us.

  • Scientific Calculation and Simulation Software
  • Other Software
  • Other analytical equipment
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Evaluation of systems (types and categories) and management through CMMS/EAM

Evaluation of systems (types and categories) and management through CMMS/EAM

Introducing issues related to RCM application and management considerations in CMMS/EAM!

This document introduces the evaluation of systems (systems and subsystems) and management through CMMS/EAM. It covers issues encountered when applying Reliability Centered Maintenance (RCM), considerations for implementing RCM, reliability information, evaluation of reliability and availability at the system level, formulation of maintenance strategies, and management points in CMMS/EAM. [Contents] ■ Reliability Centered Maintenance ■ Issues when applying RCM ■ Considerations for implementing RCM and reliability information ■ Evaluation of reliability and availability at the system level and formulation of maintenance strategies ■ Management points in CMMS/EAM ■ Conclusion *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
"VizSpark" capable of spark plug wear analysis.

"VizSpark" capable of spark plug wear analysis.

"VizSpark" makes it possible to analyze the erosion of spark plugs, which was previously difficult.

VizSpark is an arc plasma simulation software developed by Esgee Technologies in the United States, founded by Professor Raja from the University of Texas at Austin, an expert in plasma simulation. It has the most extensive track record in the analysis of spark plugs and circuit breakers, with many case studies presented at academic conferences. In Japan, it has a strong track record primarily among complete vehicle manufacturers and internal combustion engine-related manufacturers, and it supports the analysis of devices such as: - Ignition plugs (spark plugs) - Circuit breakers - Atmospheric pressure discharges - Plasma torches (plasma jets) - Welding - Thermal spraying - High-intensity lamps

  • others
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D Plasma Simulation Software "Particle-PLUS"

3D Plasma Simulation Software "Particle-PLUS"

"Particle-PLUS" is a plasma and rarefied fluid analysis software that uses the particle method.

"Particle-PLUS" is a simulation software suitable for research, development, and manufacturing of devices and materials using plasma. - It specializes in low-pressure plasma analysis. - It can perform advanced physical model analysis such as CCP and external circuit models. - It excels in plasma simulation for low-pressure gases, where calculations with fluid models are challenging. - It supports 2D (two-dimensional) and 3D (three-dimensional) analyses, allowing efficient analysis even for complex models. - As a strength of our in-house developed software, it can perform CCP and magnetron sputtering calculations with standard features, and customization to fit customer devices is also possible. ◆ Supports various cases ◆ - Magnetron sputtering - PVD, plasma CVD - Capacitively coupled plasma (CCP) - Dielectric barrier discharge (DBD) - Electrophoresis, etc. ◆ Outputs various calculation results ◆ - Potential distribution - Density distribution/temperature distribution/generation distribution of electrons and ions - Particle flux and energy flux to the walls - Energy spectrum of electrons and ions at the walls - Density distribution/temperature distribution/velocity distribution of neutral gas, etc. *For more details, please feel free to contact us.

  • Scientific Calculation and Simulation Software
  • Other Software
  • Other analytical equipment
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
CAE software "Simerics MP+" strong in gear pumps.

CAE software "Simerics MP+" strong in gear pumps.

Simulate the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CAE software specialized for pumps that other CAE software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements in oil pumps for automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoid pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, the actual mesh creation and movement should definitely be demonstrated in a demo!

  • Other Software
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Strong CAE software for vane pumps 'Simerics MP+'

Strong CAE software for vane pumps 'Simerics MP+'

Simulate the flow characteristics of volumetric pumps such as vane pumps! A CAE software specialized for pumps that other CAE software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, please see a demo presentation for the actual mesh creation and movement!

  • Other Software
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
CAE software "SimericsMP+" strong in automotive oil lubrication.

CAE software "SimericsMP+" strong in automotive oil lubrication.

Fluid analysis software for gear pumps, vane pumps, and other positive displacement pumps! A CAE software specialized for pumps that other CAE software struggles with!

SimericsMP+ is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes with clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements for oil pumps used in automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoid pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, the actual mesh creation and movement should definitely be demonstrated in a demo!

  • Other Software
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
CAE software strong in automotive oil lubrication: Simerics MP+

CAE software strong in automotive oil lubrication: Simerics MP+

Fluid analysis software for volumetric pumps such as gear pumps and vane pumps! CAE software specialized for pumps that other CAE software struggles with!

Simerics MP+ is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow fields (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the micrometer range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements for oil pumps used in automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, we encourage you to see the actual mesh creation and movement through a demo presentation!!

  • Other Software
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Strong CAE software for gear pumps, 'Simerics MP+'

Strong CAE software for gear pumps, 'Simerics MP+'

Simulate the flow characteristics of volumetric pumps such as gear pumps and vane pumps! A CAE software specialized for gear pumps, which are challenging for other CAE software!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the micrometer range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements for oil pumps used in automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoid pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, please see a demonstration for the actual mesh creation and movement!

  • Other Software
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Simulation of a heat exchanger using SimericsMP.

Simulation of a heat exchanger using SimericsMP.

Introduction to the simulation of a shell-and-tube heat exchanger, an example of thermal fluid analysis.

CFD provides a way to shorten product development periods, reduce prototyping costs, and obtain detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can be useful for product development using Simerics' CAE/CFD software. Heat exchangers have various applications, including boilers, steam generators, and commonly in air conditioners, refrigerators, and automobile radiators. While it is essential to enhance heat transfer efficiency, there is also a demand for miniaturization, which requires various trials and errors in design. However, designing often requires significant costs and time spent on prototyping and experiments. In CFD simulations, computation time can become lengthy depending on the shape of the shell and the number of tubes, but with Simerics' CFD, high-performance thermal fluid analysis can be processed quickly through large-scale parallel computing, allowing for easy and rapid results. The interior of the shell is also modeled in detail, replicating conditions close to actual experiments. This can lead to significant reductions in labor and costs! There are still many reasons to use Simerics' CFD software. Please check the link below or feel free to contact us!

  • others
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Materials development analysis software 'Materials Studio'

Materials development analysis software 'Materials Studio'

Material development simulation software for analysis in quantum mechanics, classical mechanics, and mesoscale, adapted for materials informatics.

"Materials Studio" A suite of molecular modeling/simulation tools for next-generation materials development equipped with quantum mechanics (density functional theory), classical mechanics (molecular dynamics calculations), mesoscale (dissipative particle dynamics calculations, etc.), statistics, and analysis/crystallization tools. "Materials Informatics" 【Features】 ■ Simulation software that streamlines materials development Available for use by those engaged in research, development, design, and manufacturing across various industries and fields. ■ Supports various types of materials Predicts how the atomic and molecular structures relate to the physical properties and behaviors of materials in the fields of materials science and chemistry, effective for understanding physical phenomena. ■ Examples Research and development in crystal growth, thin film formation, fuel cells, lubricants, catalysts, polymers and mixtures, metals and alloys, batteries and fuel cells, etc. ■ Enhanced visualization with "Materials Studio Visualizer" ■ All tasks, including creating crystal structures, setting calculation conditions, and displaying calculation results, can be performed on a single GUI screen. *For more details, please refer to the catalog or feel free to contact us.

  • Other Software
  • others
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
"Dr.Sum" for on-site aggregation, analysis, and reporting tasks.

"Dr.Sum" for on-site aggregation, analysis, and reporting tasks.

One billion pieces of data can be aggregated in just one second! Easily obtain the information you want when you want it. This is a 'front database' for field personnel to utilize data.

The front database "Dr.Sum" solves these kinds of problems! "I spend too much time on data extraction and processing, preventing me from doing other tasks." "The burden of regularly creating materials like monthly reports and meeting documents is significant." "I can't quickly obtain the information I need when I need it." "I have to request data creation from the IT department, which takes time." ★Over 6,100 companies have implemented it★ 【Main Features】 ・An interface that anyone can use without programming ・High-speed aggregation of large volumes of data ・No increase in costs even with an increase in the number of users ・Easy maintenance ・Integration with higher-level systems is also possible

  • BI Tools
  • Database
  • Big Data
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to soft

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.