soft - メーカー・企業1821社の製品一覧とランキング | イプロス

更新日： 集計期間:Apr 08, 2026～May 05, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。

softのメーカー・企業ランキング

更新日： 集計期間:Apr 08, 2026～May 05, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。

  1. ユニオンシステム Osaka//Information and Communications
  2. アークシステム 本社 Kanagawa//others
  3. シネマレイ 名古屋本社 Aichi//Information and Communications
  4. 4 アドバン Nagano//others
  5. 5 JIPテクノサイエンス Tokyo//Information and Communications
企業ランキングへ

softの製品ランキング

更新日： 集計期間:Apr 08, 2026～May 05, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。

  1. Super Build／SS7 Op.木造ラーメン ユニオンシステム
  2. Safety Education and Technical Education VR シネマレイ 名古屋本社
  3. Quicker and more accurate construction cost estimation! Drawing extraction software Hiroi-kun III アークシステム 本社
  4. 4 "AI-OCR" that digitizes handwritten invoices with high precision *customizable アドバン
  5. 5 PLAXIS HSLSモデル JIPテクノサイエンス

softの製品一覧

4561～4590 件を表示 ／ 全 6477 件

表示件数
Civil engineering design software "MY-FRAME Plane Frame Analysis"

Civil engineering design software "MY-FRAME Plane Frame Analysis"

Load conditions, support conditions, and combination loads can be set flexibly.

"MY-FRAME Plane Frame Analysis" is an analysis software that allows you to check FRAME structures, load conditions, results of displacements, bending moments, and shear forces on the screen with a CAD-like feel. It performs structural analysis for arbitrary plane frame structures subjected to in-plane and out-of-plane loads. The analysis is conducted using the displacement deformation method, allowing for flexible settings of applied loads, support conditions, and combination loads. Additionally, the analysis results for displacements, bending moments, and shear forces can also be viewed on the screen. 【Features】 ■ Capable of performing structural analysis under in-plane and out-of-plane loads ■ Analysis conducted using the displacement deformation method ■ Analysis results for displacements, bending moments, and shear forces can be viewed on the screen ■ CSV file import functionality available ■ Auxiliary calculation function for pile foundations allows for the application of coupled springs at supports *For more details, please refer to the external link or feel free to contact us.

  • Other Software
  • soft

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Civil engineering design software "Pile Foundation Design"

Civil engineering design software "Pile Foundation Design"

Stable calculations are possible using the rigid matrix method! We can also conduct studies on liquefaction, pile comparison tables, and selection of forms.

The "Pile Foundation Design" is a civil engineering design software that primarily allows for the calculation of bearing capacity, stability, section calculations, and pile head treatment of pile foundations based on the "Guidelines for Road Bridges and Their Explanations (November 2017)." Assuming the base slab as a rigid body, the displacement of the entire pile foundation (displacement of the base slab) is calculated using the stiffness matrix method, which determines the displacement through the spring matrix at the pile head and the equilibrium equations of the horizontal forces, vertical forces, and rotational moments acting on the entire pile foundation. Additionally, it can also conduct studies on liquefaction, pile comparison tables, and selection of types. 【Features】 ■ Capable of calculating bearing capacity for both liquefied and non-liquefied conditions ■ Can calculate the ultimate bearing capacity (Type I, Type II) during Level 2 earthquakes ■ For supporting piles, it is possible to check the embedment length into the bearing layer ■ Can calculate the bearing capacity at the pile tip for thin layer support ■ Allows selection of the method for determining the length of inclined piles *For more details, please refer to the PDF materials or feel free to contact us.

  • Other Software
  • soft

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Civil engineering software "Design of Gravity-Type Bridge Abutments"

Civil engineering software "Design of Gravity-Type Bridge Abutments"

It is possible to specify the slope (α) of the backfill soil! Design considering partial coefficients can be achieved.

The "Gravity-Type Abutment Design" is a civil engineering design software that allows for the design of gravity-type abutments based on the Road Bridge Design Guidelines (2017) using the partial coefficient method. When the ground is determined to be subject to persistent and variable actions, as well as liquefaction, a check against Level 2 seismic motion will be conducted. Additionally, the superimposed load can be set up to three types, allowing for considerations such as snow loads. 【Features】 ■ Enables the design of gravity-type abutments using the partial coefficient method ■ Allows for design considering partial coefficients ■ Capable of designing under conditions dominated by persistent actions, variable actions, and accidental actions ■ The earth pressure used in the design corresponds to the following methods: - Earth pressure only - Earth pressure + triangular water pressure - Earth pressure + residual water pressure ■ Arbitrary loads can include concentrated loads, distributed loads, and moment loads ■ The backfill friction angle (δ) and shear resistance angle (φ) can be specified arbitrarily *For more details, please refer to the PDF materials or feel free to contact us.

  • Other Software
  • soft

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Civil Engineering Design Software "Design of Gravity-Type Bridge Abutments (H24 Road Standard Version)"

Civil Engineering Design Software "Design of Gravity-Type Bridge Abutments (H24 Road Standard Version)"

We will perform the calculation of the acting forces on gravity-type abutments, stability calculations for direct foundations, stability calculations for pile foundations, and member design.

The "Design of Gravity-Type Abutments (H24 Road Guidelines Version)" is a civil engineering design software that allows for the calculation of acting forces on gravity-type abutments, stability calculations for direct foundations, stability calculations for pile foundations, and member design, based on the Road Bridge Design Guidelines (March 2012). Design considerations include checks against Level 2 seismic motions when located on ground determined to experience Level 1 seismic motions (using the seismic intensity method) and liquefaction. Additionally, the earth pressure coefficient can accommodate Coulomb, modified Terzaghi-Okabe methods (optional). 【Features】 ■ Shapes compatible with bridge anti-collapse installations can be input during design loading. ■ Up to three types of superimposed loads can be handled, with the ability to set load names. ■ Specification of the backfill slope (α) is possible. ■ Diagrams of the approach area behind the abutment can be created. *For more details, please refer to the PDF document or feel free to contact us.

  • Other Software
  • soft

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Civil engineering design software "Design of Inverted T-Type Abutment (H24 Road Standard Version)"

Civil engineering design software "Design of Inverted T-Type Abutment (H24 Road Standard Version)"

Calculations of forces, stability calculations for direct foundations, stability calculations for pile foundations, and member design can be performed.

The "Design of Reverse T-Type Abutments (H24 Version of Road Guidelines)" is a civil engineering design software that allows for the design of reverse T-type abutments under Level 1 seismic motion (intensity method) based on the Road Bridge Design Guidelines (2012). It enables calculations of acting forces, stability calculations for direct foundations, stability calculations for pile foundations, and member design. During design loading, shapes compatible with bridge collapse prevention installations can be input. Furthermore, the software can handle calculation cases for normal conditions, temperature, wind, temperature + wind, Level 1 seismic conditions, collision, construction, and Level 2 seismic conditions. 【Features】 ■ Capable of designing reverse T-type abutments under Level 1 seismic motion (intensity method) ■ Shapes compatible with bridge collapse prevention installations can be input during design loading ■ The earth pressure used in the design can accommodate the following three methods: - Earth pressure only - Earth pressure + triangular water pressure - Earth pressure + residual water pressure ■ The earth pressure coefficient can accommodate Coulomb, modified Terzaghi, and Okabe methods (arbitrary) ■ A range that does not consider backfill earth pressure can be set ■ Arbitrary loads can include concentrated loads, distributed loads, and moment loads *For more details, please refer to the PDF document or feel free to contact us.

  • Other Software
  • soft

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Civil engineering design software "Seismic Design of Pile Foundations (H24 Version)"

Civil engineering design software "Seismic Design of Pile Foundations (H24 Version)"

Calculation of virtual RC cross-sections is possible! The number of piles can be input up to 30 rows in both the bridge axis and the direction perpendicular to the bridge axis.

The 'Seismic Design of Pile Foundations (H24 Version)' is a civil engineering design software that allows for the verification of pile foundations during Level 2 earthquakes, based on the Road Bridge Design Guidelines and their Commentary, Volume IV on Substructures, and Volume V on Seismic Design. It can perform calculations in conjunction with our products 'Design of Inverted T-Type Abutments' and 'Design of RC Pier.' Additionally, it allows for the examination of liquefaction. [Features] ■ Verification of pile foundations using the seismic lateral resistance method during Level 2 earthquakes is possible. ■ Based on the Road Bridge Design Guidelines and their Commentary, Volume IV on Substructures, and Volume V on Seismic Design. ■ Calculations can be performed in conjunction with 'Design of Inverted T-Type Abutments' and 'Design of RC Pier.' ■ Selection of seismic isolation bearings is possible. ■ Supports single (one column) piles. *For more details, please refer to the PDF document or feel free to contact us.

  • Architectural Design Software
  • soft

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Civil engineering software "Design of Retaining Structures using the Elastic-Plastic Method"

Civil engineering software "Design of Retaining Structures using the Elastic-Plastic Method"

Calculation of root depth and the calculation of wall displacement and sectional forces at each construction stage can be performed.

"The design of retaining structures using the elastoplastic method" is a civil engineering design software that allows for the design of retaining structures based on guidelines such as road earthworks and temporary structures, using the elastoplastic method (extended method). The calculations include the calculation of embedment length, displacement of the wall body at each construction stage, and calculation of sectional forces. Additionally, it can assess heaving, slab bulging, piping, and calculate embedment length based on steady-state conditions. 【Features】 ■ Allows for the examination of retaining structures using the elastoplastic method (extended method) ■ Up to 20 tiers of cutting beams can be installed ■ Can consider preload loads ■ Up to 20 layers of strata can be calculated, with passive side ground improvement possible for up to 5 layers ■ Can handle triangular water pressure and confined water pressure *For more details, please refer to the PDF document or feel free to contact us.

  • Architectural Design Software
  • soft

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Civil engineering design software "Reinforcement Design of Existing Bridge Piers"

Civil engineering design software "Reinforcement Design of Existing Bridge Piers"

Reinforcement configuration can be input up to three levels! We will conduct strength verification and reinforcement design for existing RC bridge piers.

The "Reinforcement Design of Existing Bridge Piers" is a civil engineering design software that enables the reinforcement design of RC bridge piers based on the seismic design guidelines for road bridges and the collection of case studies on seismic reinforcement methods for existing bridges. It references materials related to seismic design for road bridges and is based on the Road Bridge Design Guidelines and its commentary, Volume V, Seismic Design Edition. The software can assess damage to existing bridge piers and evaluate the damage cross-section, bending strength, shear strength, and deformation performance after reinforcement. 【Features】 ■ Can assess damage judgment for stepped sections ■ Can consider the damping effect from the foundation ■ Can consider the deep beam effect ■ Allows selection of the shear strength assessment position during failure mode determination ■ Allows selection of the treatment of correction factor Cc for positive and negative alternating loads *For more details, please refer to the PDF materials or feel free to contact us.

  • Architectural Design Software
  • soft

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Civil engineering design software "Detention Basin (Disaster Prevention Detention Basin) Capacity Calculation System"

Civil engineering design software "Detention Basin (Disaster Prevention Detention Basin) Capacity Calculation System"

The simplified rainfall intensity formulas can be selected from six types: Talbot type, Sherman type, Kuno-Ishiguro type, Kimishima type, Nagano Prefecture type, and Yamanashi Prefecture type.

The "Adjustment Pond (Disaster Prevention Regulation Pond) Capacity Calculation System" is a civil engineering design software that enables hydrological design for off-site and on-site retention facilities, referencing technical standards for disaster prevention regulation ponds, technical guidelines for watershed retention facilities, and technical guidelines for rainwater infiltration facilities. It can create rainfall intensity curves, calculate flood arrival times, estimate design sedimentation volumes, and compute the heights of flood outlets and non-overflow sections. Additionally, the EX version can calculate planned wastewater and rainwater volumes, allowing for the examination of flow capacities in separate and combined drainage systems. 【Features】 - Capable of hydrological design for off-site and on-site retention facilities - Can perform calculations for complete retention - Can calculate flood outlets and non-overflow section heights - Can perform calculations when infiltration facilities are used in conjunction - For on-site retention facilities, it can estimate ponding times *For more details, please refer to the PDF document or feel free to contact us.

  • Architectural Design Software
  • soft

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Civil engineering software "Stability Calculation of Embankments"

Civil engineering software "Stability Calculation of Embankments"

Stability calculations for arc sliding of the embankment, examination of countermeasures, investigation of liquefaction, and calculations of arc sliding using the Newmark method will be conducted.

The 'Stability Calculation of Embankments' is a civil engineering design software that can perform stability calculations based on arc sliding of embankments, in accordance with the design standards for land improvement project planning 'Fill Dam Edition', the guidelines for land improvement project planning 'Pond Maintenance', and technical standards for disaster prevention regulation ponds, etc. Using a keyboard and mouse, it is possible to input grid point coordinates, geological block data, water levels, loads, MCL, NCL, maximum points, minimum points, and tensile crack lines. Additionally, the background color of the screen can be changed, and each geological block can be color-coded. [Features] ■ Can perform stability calculations based on arc sliding of embankments according to technical standards for disaster prevention regulation ponds, etc. ■ Capable of importing grid point coordinates and geological blocks by reading DXF and CSV files ■ Can calculate safety factors and necessary restraining forces using the division method ■ Can take tensile crack lines into account ■ For each water level case, the sliding surface range upstream and downstream can be specified *For more details, please refer to the PDF document or feel free to contact us.

  • Architectural Design Software
  • soft

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Civil engineering design software "Design of Drainage Pits"

Civil engineering design software "Design of Drainage Pits"

This is a system for stability calculations of catchment basins and member calculations for side walls and bottom slabs.

"The design of collection wells" is a civil engineering design software that can perform stability calculations and member calculations for small-scale collection well structures, including side walls and bottom slabs. In the stability calculations, it examines buoyancy and bearing capacity, while in the member calculations, it allows for the selection of three calculation methods (1. Calculation using rectangular slabs, 2. Method using frame calculations, 3. Calculation based on the "Design Handbook (Revised Kinki Regional Construction H12)"). It can also check the stress of the side walls and bottom slabs. 【Features】 ■ Design for "reinforced concrete structures" and "unreinforced concrete structures" is possible. ■ The shape of the side walls can be set to vertical, outward sloped, inward sloped, or both sides sloped. ■ Supports calculations for normal and seismic conditions. ■ Reinforcement can be set for single or double reinforcement. ■ The cover for reinforcement can be individually set for both the outer and inner sides of the reinforcement. *For more details, please refer to the PDF materials or feel free to contact us.

  • Architectural Design Software
  • soft

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Civil engineering design software "Pipeline Design"

Civil engineering design software "Pipeline Design"

We will examine the burial depth (freezing depth, uplift) and verify the safety of the pipe body under normal conditions and during earthquakes (Level 1, 2).

"The design of pipelines" is a civil engineering software that examines the burial depth of both pressure pipes and non-pressure pipes based on the design standards and operational guidelines for land improvement project planning, as well as the planning and design guidelines for sewer facilities. It also checks the safety of the pipe body under normal conditions and during earthquakes. In the safety check of the pipe body, pipe types with safe pressure strength against external pressures from live loads such as soil pressure and vehicle loads, as well as internal pressures from hydrostatic pressure and water hammer pressure, are selected. 【Features】 ■ Data of pipes registered for each pipe type ■ By inputting the change in burial depth, it is possible to register the examined cross-section ■ Safety checks can be performed based on the total cross-sectional forces during normal conditions and earthquakes *For more details, please refer to the PDF materials or feel free to contact us.

  • Architectural Design Software
  • soft

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Civil engineering design software "Arbitrary Shape Retaining Wall Design System ST Version/EX Version"

Civil engineering design software "Arbitrary Shape Retaining Wall Design System ST Version/EX Version"

By inputting the cross-sectional shape with coordinate values, it can accommodate various types of retaining walls.

The "Arbitrary Shape Retaining Wall Design System ST Version/EX Version" is a civil engineering design software that performs stability calculations and cross-section calculations for retaining walls. By inputting the cross-sectional shape using coordinate values, it can accommodate various types of retaining walls. It displays the cross-sectional view on the screen while inputting data, which helps prevent input errors in advance. Additionally, it is possible to create a cantilever section on the front side of the retaining wall. The EX version allows for the examination of overall stability. 【Features】 ■ Performs stability calculations and cross-section calculations for retaining walls ■ Prevents input errors by displaying the cross-sectional view on the screen while entering data ■ Allows for the creation of a cantilever section on the front side of the retaining wall ■ The EX version enables the examination of overall stability ■ Can consider protrusions *For more details, please refer to the PDF materials or feel free to contact us.

  • Architectural Design Software
  • soft

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Civil engineering software "Tameike Hydrological Calculation"

Civil engineering software "Tameike Hydrological Calculation"

Calculate the design flood flow rate using outflow calculations and perform hydraulic design calculations for the spillway.

The "Reservoir Hydraulic Calculation" is a civil engineering design software that can perform calculations for the design flood flow rate in reservoirs and the hydraulic design calculations for the approach channel, adjustment section, transition section, discharge channel, energy dissipation structure, downstream channel, and freeboard based on the land improvement project design guidelines "Reservoir Maintenance." Calculations for the design flood flow rate and the design of the spillway can be performed as both batch calculations and individual calculations. Additionally, the design flood flow rate can be calculated in batches for two probability years (such as 200-year probability and 100-year probability), allowing for flow rate selection for each spillway facility. 【Features】 ■ Supports examination of storage effects based on A-section flow rates ■ Rainfall waveforms can accommodate central concentration type, central concentration type (Hyogo Prefecture), and rear concentration type ■ The elevation at the downstream end of the transition section can be set using either calculated values or input values ■ The channel width of the transition section can be set to constant width, tapered, or constant width + tapered *For more details, please refer to the PDF materials or feel free to contact us.

  • Architectural Design Software
  • soft

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Civil engineering design software "Kago Construction and Flat Sheet Construction Design"

Civil engineering design software "Kago Construction and Flat Sheet Construction Design"

We will design "basket mats," "square-shaped baskets," and "flat-pressed blocks."

This product is a system for calculating the stability of gabions (overturning, sliding, bearing capacity), flow force (representative flow velocity), and wire mesh strength. The basket mat is applicable to flat laying methods and multi-layer stacking methods. The flat laying method calculates the representative flow velocity and examines the flow force, while the multi-layer stacking method conducts stability calculations, determines the representative flow velocity, and examines the flow force. Additionally, the flat laying block is used in the articulated block revetment method, which calculates the representative flow velocity and conducts stability checks (verification of sliding and peeling). 【Function Details (Excerpt)】 ■ Input (Gabion) - The front slope of the gabion is set to a steep slope of 1:1.5 or less. - The number of gabion layers can be up to 20 layers. ■ Input (Basket Mat) - The slope of the revetment method for the flat laying method is set to a gentle slope of 1:2.0 or more. - The number of wire cage layers can be up to 20 layers. ■ Input (Flat Laying Block) - The slope of the revetment method for the articulated block revetment method is set within the range of 1:1.5 to 3.0. *For more details, please refer to the PDF document or feel free to contact us.

  • Scientific Calculation and Simulation Software
  • Analysis and prediction system
  • Baskets and futon baskets
  • soft

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Civil engineering design software "Liquefaction Analysis"

Civil engineering design software "Liquefaction Analysis"

We will calculate the resistance rate FL against liquefaction and determine the liquefaction.

This system calculates the resistance rate FL against liquefaction based on the "Design Guidelines for Road Bridges and Their Commentary V Seismic Design" and the "Guidelines for Structural Design of Building Foundations," and performs liquefaction assessment and liquefaction index calculations. The calculation results are easily visible on the screen, and it is also possible to modify the calculated values directly on the screen. Additionally, in the case of the "Design Guidelines for Road Bridges," it conducts an assessment of fluidization and calculates fluid forces. 【Features】 ■ Calculates the resistance rate FL against liquefaction ■ Performs liquefaction assessment and liquefaction index calculations ■ Calculation results are clearly visible on the screen ■ Allows modification of calculated values on the screen ■ Demonstrates effectiveness for prompt evaluations *For more details, please refer to the PDF document or feel free to contact us.

  • Scientific Calculation and Simulation Software
  • Analysis and prediction system
  • Other Software
  • soft

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Ground Bearing Capacity Design Calculation System ST Version/EX Version

Ground Bearing Capacity Design Calculation System ST Version/EX Version

We will conduct studies on the thickness of the ground improvement layer, calculate the amount of settlement, and perform stability calculations based on circular sliding!

This product is a system for calculating settlement amounts, stability calculations using circular sliding, calculating the allowable vertical bearing capacity of shallow foundations, and examining the thickness of ground improvement layers. In the calculation of settlement amounts, it is possible to calculate "consolidation settlement," "immediate settlement," "residual settlement," and "lateral displacement." In the calculation of allowable vertical bearing capacity, it is possible to calculate the "bearing capacity of shallow foundations on level ground" and the "bearing capacity of shallow foundations on sloped ground." 【Features】 ■ Conducts examinations of ground improvement layer thickness, calculates settlement amounts, and performs stability calculations using circular sliding. ■ In the calculation of settlement amounts, it is possible to calculate "consolidation settlement," "immediate settlement," "residual settlement," and "lateral displacement." ■ In the calculation of allowable vertical bearing capacity, it is possible to calculate the "bearing capacity of shallow foundations on level ground" and the "bearing capacity of shallow foundations on sloped ground." *For more details, please refer to the PDF materials or feel free to contact us.

  • Scientific Calculation and Simulation Software
  • Other Software
  • Analysis and prediction system
  • soft

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Civil engineering design software "Plate (Circular/Rectangular) Calculation" <Finite Element Method/Simplified Method>

Civil engineering design software "Plate (Circular/Rectangular) Calculation" <Finite Element Method/Simplified Method>

Calculate the sectional forces when a load acts on circular or rectangular plates! It is possible to check the stress of reinforced concrete.

This system is a program that calculates the sectional forces when loads are applied to circular and rectangular plates and performs stress checks. It consists of two products: "Calculation of Plates (Circular and Rectangular) using Finite Element Method" for calculating sectional forces using the finite element method, and "Calculation of Plates (Circular and Rectangular) using Simplified Method" for calculating sectional forces using series solutions. Additionally, the load applied to the plate can be up to a maximum of five for a single plate. 【Function Details (Excerpt)】 ■ Load Conditions - Uniformly distributed load - Uniformly variable distributed load - Partial line load - Concentrated load - Partial uniformly distributed load ■ Stress Checks - Stress checks for reinforced concrete are possible - For the simplified method in the case of rectangles, considerations for bending stress and shear stress are conducted - In the case of the finite element method, considerations for bending stress are conducted *For more details, please refer to the PDF document or feel free to contact us.

  • Scientific Calculation and Simulation Software
  • Other Software
  • Analysis and prediction system
  • soft

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Civil engineering software "Design of Bridge Anti-Fall Walls"

Civil engineering software "Design of Bridge Anti-Fall Walls"

We will implement measures to prevent bridge collapse based on the Road Bridge Design Guidelines, including the design of expanded footing and lateral displacement restraints!

This system implements bridge collapse prevention measures based on the "Road Bridge Design Guidelines and Commentary V Seismic Design" with reference to the "Case Studies of Seismic Reinforcement Methods for Existing Bridges." Support conditions can be selected from "rubber bearings," "fixed bearings," and "movable bearings," and the plan shape can be chosen from "straight bridge," "skew bridge," and "curved bridge." In the bridge axis direction, it can be designed with a bridge collapse prevention wall, and in the perpendicular direction, it can be designed as a lateral displacement restraint structure. 【Function Details (Excerpt)】 ■ Current Status Survey of Footing Widening - Check whether the "girder bearing length" of the existing substructure is satisfied. - Support conditions can be selected from "rubber bearings," "fixed bearings," and "movable bearings." - The plan shape can be chosen from "straight bridge," "skew bridge," and "curved bridge." - The presence or absence of bridge collapse prevention structures can be selected. - It is possible to calculate the horizontal load capacity PLG of the abutment. *For more details, please refer to the PDF document or feel free to contact us.

  • Architectural Design Software
  • Other Software
  • Bridge Construction
  • soft

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Civil Engineering Software "Design of Drop Structures" <Water Cushion Function Version>

Civil Engineering Software "Design of Drop Structures" <Water Cushion Function Version>

Comparison and examination of cushion scale! We will design water cushion type drop structures and vertical wall type floor stop drop structures.

This system conducts the design of "water cushion type drop structures" based on the "Design Standards and Operation/Explanation for Land Improvement Project Planning and Design (Waterway Works)." It allows for comparative analysis of cushion sizes for each flow case, and calculations regarding the water level in the boundary area of the drop condition, the flow conditions near the drop inlet, as well as the upstream and downstream connection channels. The design flow can be set for up to a maximum of five cases. 【Function Details (Excerpt)】 ■ Comparative analysis of cushion sizes for each flow case 　・Verification of B1≦B0≦2B1 　・Verification of P＞3M 　・Verification of the slope angle of the water vein center: θ 　・Examination of the water cushion length: L0 *For more details, please refer to the PDF document or feel free to contact us.

  • Architectural Design Software
  • Other Software
  • Scientific Calculation and Simulation Software
  • soft

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Civil engineering software "Rockfall Simulation Analysis"

Civil engineering software "Rockfall Simulation Analysis"

It visually represents the falling motion of falling rocks using trajectory diagrams, stopping positions, stopping speeds, and more!

This system simulates the behavior of falling rocks through analysis using five methods. The simulation results for the position, falling speed, and motion conditions of the falling rocks at each measurement point are analyzed from multiple angles, visually representing the falling motion of the rocks through trajectory diagrams, stopping positions, stopping speeds, jump amounts, jump heights, and collision speeds with structures. Additionally, the input details regarding slope conditions, inspection locations, and the installation of countermeasures can be confirmed on the input confirmation screen. 【Function Details (Excerpt)】 ■ Simulation Methods - You can choose from five methods of point mass falling rock simulation. ■ Trajectory Diagrams - Outputs overlapping diagrams for all cases and individual case diagrams. - The tracking of falling motion ends when a collision with countermeasures occurs. ■ Stopping Position and Stopping Speed - Outputs the distribution of stopping positions of falling rocks and the motion conditions before stopping. - The stopping speed diagram represents motion conditions through the direction and length of the lines output in the diagram. *For more details, please refer to the PDF document or feel free to contact us.

  • Scientific Calculation and Simulation Software
  • Other Software
  • Analysis and prediction system
  • soft

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Civil Engineering Software "Rockfall Protection Net and Fence Design"

Civil Engineering Software "Rockfall Protection Net and Fence Design"

Registration of wire ropes, supports, and wire mesh components is possible! Calculations for rockfall protection works and rockfall prevention works will be conducted.

This system performs calculations for rockfall protection works, including "Pocket-type Rockfall Protection Nets" and "Rockfall Fences," based on guidelines such as the "Rockfall Countermeasure Handbook" and "Rockfall Countermeasure Work Manual." It is also capable of calculating preventive measures against rockfalls, including "Covered Rockfall Protection Nets," "Wire Rope Hanging Works," and "Wire Rope Laying Works." Additionally, it allows for the registration of materials such as wire ropes, supports, and wire mesh. 【Features】 <Rockfall Protection Works> ■ Examination of absorbable energy ■ Verification of wire mesh and wire rope materials ■ Verification of support stress ■ Examination of fence height <Rockfall Prevention Works> ■ Verification of wire mesh and wire rope materials ■ Verification of rock bolts ■ Examination of anchor bolts *For more details, please refer to the PDF materials or feel free to contact us.

  • Scientific Calculation and Simulation Software
  • Other Software
  • Architectural Design Software
  • soft

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
AI Mail Monitoring Agent "ToDo Monitoring"

AI Mail Monitoring Agent "ToDo Monitoring"

Equipped with IBM Watson! An email monitoring agent that checks complaints using AI.

"ToDo Monitoring" is an AI email monitoring agent that monitors emails arriving at a specific email address in real-time. By integrating with IBM Watson, it can identify intentions such as requests and reminders. It notifies users when there are intentions like requests or reminders contained within the emails. 【Features】 ■ Integration with AI (Artificial Intelligence) IBM Watson ■ Real-time notifications ■ Available 365 days a year by your side *For more details, please download the PDF or contact us.

  • Email delivery system
  • Security cameras and surveillance systems
  • soft

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[ZEST Implementation Case] Seirei Welfare Services Corporation

[ZEST Implementation Case] Seirei Welfare Services Corporation

Create complex schedules efficiently! It prevents oversights and mistakes, making it an indispensable tool.

We would like to introduce a case study of the implementation of "ZEST" at the Seirei Welfare Corporation. With a large scale operation, having more than 10 staff members and over 100 users, scheduling often led to many incidents and took a lot of time, resulting in inefficiencies. As a result of the implementation, incidents and accidents related to scheduling decreased, and the time spent on scheduling also reduced, which lessened the physical burden. [Case Overview] ■Challenges - In a large-scale operation, scheduling often leads to many incidents and takes a lot of time. - Continuing to rely on paper-based methods is impractical. ■Results - Incidents and accidents related to scheduling decreased. - The sense of mental burden was alleviated, and the time spent on scheduling also reduced. *For more details, please refer to the PDF document or feel free to contact us.

  • CRM (Customer Relationship Management System)
  • Business Trip Management System (BTM)
  • soft

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Cloud estimation, delivery, and invoicing service "Misoca"

Cloud estimation, delivery, and invoicing service "Misoca"

"Zero yen for the first year" Simple operation cloud quotation, delivery, and invoicing service "Misoca" that makes billing tasks easier.

"Misoca" allows you to easily create and manage estimates, delivery notes, and invoices all in one place. It is a cloud-based service that streamlines billing operations. 【Features】 ■ Easy creation of estimates, delivery notes, and invoices Simply choose your preferred design template from a wide selection and input your text. You can create original invoices with stamps and logos more quickly and easily than with spreadsheet software. ■ One-click email sending and mailing Email sending, PDF issuance, link sharing, and mailing can all be completed with just one click. Automation features such as automatic invoice creation, automatic email sending, and automatic transmission of entries to tax filing software significantly streamline accounting tasks. ■ Reduces operational and management costs of billing operations, allowing you to focus on your core business ■ Streamlines accounting tasks by integrating with accounting software ■ A wealth of convenient features to further enhance billing efficiency (team features, scheduled automatic invoice creation, smartphone app, etc.) ■ Currently running a free campaign for the first year Anyone can try the paid plan for free for the first year. Additionally, there is a free plan available that allows you to use it for free indefinitely by issuing 10 invoices per month. *For more details, please download the PDF or contact us.

  • Invoicing system
  • soft

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Team Medical Support System "KokuranDoc."

Team Medical Support System "KokuranDoc."

Total support for team-based medical care!

"KokuranDoc." is a team medical support system that assists operations with the flexibility unique to custom design. It can be implemented as an original system tailored to the operations and needs of the facilities using it. We visualize what you want to see and provide comprehensive support for team medical care. 【Features】 ■ Unique systemization through master settings ■ Contribution to a wide variety of team medical care ■ Statistical management changes with dashboard functionality ■ Easier and more convenient data linkage with our other systems *For more details, please download the PDF or contact us.

  • Welfare and medical equipment
  • soft

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Nutritional Guidance Management System "Food is Medicine"

Nutritional Guidance Management System "Food is Medicine"

Smile with food! We provide multifaceted support for nutritional guidance to promote health.

"Food is Medicine" is a nutrition guidance management system that centrally manages patient guidance appointments, guidance history, medical condition records, meal records, and more, supporting the work of nutritionists. Management focused on inpatient, outpatient, and group settings is, of course, available, and depending on the version, it can also be used for home care and public health. Integration with ordering and electronic medical record systems, as well as medical systems, testing systems, and caregiving support systems, is possible regardless of the manufacturer. 【Features】 ■ A nutrition guidance management system specialized for medical and home care ■ Flexible design allows management tailored to operational needs ■ Dashboard functionality enables dynamic statistical management ■ Easier and more convenient data integration with our other systems *For more details, please download the PDF or contact us.

  • Welfare and medical equipment
  • soft

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Open source business application/ERP suite 'Odoo'

Open source business application/ERP suite 'Odoo'

Open source cloud ERP!

The "Odoo" that we handle is a popular open-source business application/ERP suite used by over 4.5 million users worldwide. In addition to its rich features, it excels in usability, scalability, and maintainability, boasting overwhelming cost performance. Moreover, its coverage extends beyond the traditional ERP package scope to include CMS, e-commerce, event management, help desk, and more. 【Features】 ■ Low cost ■ Covers a wide range of business areas ■ Global support *For more details, please download the PDF or contact us.

  • ERP (core system)
  • soft

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Ally of the manufacturing site: Visualizing people's postures and movements to improve work efficiency!

Ally of the manufacturing site: Visualizing people's postures and movements to improve work efficiency!

Visualizing the physical load on workers' bodies using skeletal information! Creating a work environment that is easier for the elderly.

Are there any issues such as "aging of workers" or "tasks becoming personalized and the workload being invisible"? By using 'VisionPose', it is possible to measure the posture information of workers in real-time through a web camera or network camera. Additionally, since there is no need to attach machines or devices to the body, it does not burden the workers. By visualizing the posture load of workers and reviewing work methods and workspaces, it helps prevent health issues such as lower back pain, ensures safety management, and aids in worker retention. ■Examples - Issues └Aging of workers └Tasks becoming personalized and the workload being invisible - Moving forward └It is necessary to create a work-friendly environment that reduces the physical burden on the elderly ■Features of VisionPose SDK (Software Development Kit) - AI can be tuned for additional learning specialized in specific movements - Compatible with a wide range of platforms, including edge devices - Japanese language support - No usage restrictions; commercial use is allowed - Two ready-to-use tools included - Skeleton detection using only a camera - Detection of skeletons at 30 points on the human body - Compatible with network cameras *For more details, please refer to the PDF materials or feel free to contact us.

  • Other Software
  • soft

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Ally of the manufacturing site: Visualizing people's postures and movements to improve work efficiency!

Ally of the manufacturing site: Visualizing people's postures and movements to improve work efficiency!

Digitize the actions of veteran workers (experts) to pass on work know-how and insights to new employees! Maintain quality through training for newcomers as well.

Are there any issues such as "aging workforce," "increased employment of foreign workers," and "task personalization"? The know-how and insights cultivated by veteran workers over many years have become tacit knowledge, which is not sufficiently shared within the company. As the workforce ages and employees retire year by year, there are cases where technical skills are not passed on to new employees. By digitizing with 'VisionPose,' we can stop personalization. By analyzing and digitizing the work of veteran employees with our product and comparing it to the movements of new employees, we can improve operations and optimize business processes. ■ Case Study 【Issues】 - Aging workforce / Increased employment of foreign workers / Task personalization 【Consequences】 - Decrease in veteran workers / Labor shortage / Deterioration of quality 【Improvement Measures】 - Optimization of new employee training is essential ■ Features of VisionPose SDK (Software Development Kit) - AI tuning allows for additional training specialized in specific movements - Compatible with a wide range of platforms, including edge devices - Japanese language support - No usage restrictions; commercial use allowed - Two ready-to-use tools included - Skeleton detection using only a camera - Detection of 30 skeletal points of the human body - Compatible with network cameras

  • Other Software
  • soft

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

softに関連する検索キーワード

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.