Last Updated： Aggregation Period:Apr 01, 2026～Apr 28, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Apr 01, 2026～Apr 28, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Apr 01, 2026～Apr 28, 2026
This ranking is based on the number of page views on our site.
2551～2580 item / All 4295 items
Safe reverse winding construction method for ground reinforcement.
The PAN (Panel And Nail) WALL method is a construction technique based on the theories of steep slope stabilization and ground reinforcement. By achieving a steep slope (1:5 to 1:1), it preserves the natural slope as much as possible and is a highly safe method based on the reverse wrapping technique.
Prevent moisture accumulation within the walls and inhibit the growth of bacteria and mold. We improve the wall environment with a simple construction method.
The "Hidamari Method" is a technology that can retroactively solve the problem of condensation inside concrete walls. Even if you take measures to prevent moisture from entering the walls using common methods or to avoid temperature differences between the outside air and the indoor environment, condensation will still occur if moisture accumulates. This method focuses on what happens after moisture has entered, using "Thermo Wool HS" to regulate humidity to a level that is less conducive to the growth of bacteria and mold, and simultaneously applying "Lifeguard Coating HS" to prevent bacteria and mold from settling, creating an environment where they cannot establish themselves inside the walls. 【Features】 ■ Condensation prevention ■ Mold prevention ■ Does not allow moisture to accumulate inside the walls, preventing the proliferation of bacteria and mold ■ Simple yet highly effective measures ■ Long-term warranty of up to 20 years: peace of mind warranty *For more details, please refer to the PDF materials or feel free to contact us.
A method that combines softeners and high-pressure hot water cleaning! It solves the problems of conventional exterior wall renovation work.
The IMI method is a technique that involves applying a safe biodegradable paint softener to deteriorated existing paint surfaces to soften the paint, followed by the injection of high-pressure hot water for removal. This method minimizes damage to the substrate, offers high efficiency, does not lead to environmental destruction or pollution, is gentle on flora and fauna, and allows for safe and hygienic removal work without compromising safety or sanitation. It is the definitive method for removing existing paint from architectural structures without excessively damaging the substrate and reducing costs in subsequent processes. 【Features】 - Minimizes damage to the substrate while removing existing paint. - Fast removal speed due to the use of hot water, leading to shortened construction periods and reduced costs. - Completely free of chemicals that impose environmental burdens, making it eco-friendly. - Low noise and low vibration, preventing dust pollution. - Particularly effective on elastic and acrylic paint films. For more details, please contact us.
Excellent biodegradability! A coating removal method that does not compromise safety or hygiene.
The traditional methods for removing paint films involve techniques such as scraping, sanding, and using stripping agents. However, these methods have issues such as long construction periods and high costs. Furthermore, the process of stripping existing paint films and removing rust can be considered a troublesome task due to problems like noise and dust pollution from the removal equipment. To address these issues, Imai Biso Co., Ltd. has been working on the development of a wall paint film renovation method (IMI method). **Features of the IMI Method:** - Minimally damages the substrate while stripping existing paint films. - Uses hot water, resulting in a fast stripping speed, which shortens the construction period and reduces costs. - Does not add any chemicals that impose an environmental burden, making it eco-friendly. - Operates with low noise and low vibration, preventing dust pollution. - Particularly effective against elastic and acrylic paint films. For more details, please contact us.
Combining softeners and high-pressure hot water cleaning! What is the "IMI method" that solves the problems of conventional methods? *Many successful cases available.
The coating removal method "IMI Method" is the most advanced system method that solves the problems of conventional methods by combining a softening agent and high-pressure hot water washing. It removes existing coatings on steel structures and concrete structures equivalent to two types of substrate preparation. By applying the undiluted solution directly to the existing coating and leaving it for 1 to 24 hours, the binding strength of the particles and the resin that connects them in the existing coating is weakened, making the removal process easier by also reducing the adhesive strength. *Registered with NETIS! The following conventional issues are resolved with the IMI Method. 【Features】 ○ A method that uses organic solvents to soften and remove coatings ○ No dust generation ○ Biodegradable, with no harmful substances remaining on the removal surface ★ This method was used for the roof of the "Yoyogi National Gymnasium." *For more details, please contact us or download the catalog to view.
Injecting chemical solutions into gaps to stop water leakage in buildings and reinforce the ground! This is a method for stopping leaks in concrete structures.
The "TACSS Method" is a one-component system that uses a chemical solution that reacts with water but is difficult to dissolve in water. It confronts high-pressure and high-flow groundwater, reliably retaining water and performing waterproofing of structures while minimizing adverse effects on groundwater. Due to its excellent properties, this system is utilized not only for ground reinforcement but also for the preservation of archaeological sites. 【Features】 ■ Complies with JWWA K-135 leaching test ■ Obtained F☆☆☆☆ certification ■ Uses a chemical solution that reacts with water but is difficult to dissolve in water ■ Has minimal adverse effects on groundwater ■ Used for ground reinforcement as well as the preservation of archaeological sites *For more details, please refer to the PDF materials or feel free to contact us.
Outstanding pull-out strength! We introduce screws specifically designed for ALC, suitable for wood as well.
The "Dream Screw" is a screw specifically designed for ALC, featuring a special pitch processing at the tip of the screw. It is difficult to crush the foamed body and can form a reliable screw thread inside the ALC, resulting in excellent pull-out strength. Additionally, due to its unique thread height and coarse pitch, it can be used in concrete, mortar, and asrock if an appropriately sized pilot hole is drilled. 【Features】 ■ In sheet metal work, 0.6mm thick steel plates can be penetrated without a pilot hole. ■ Despite being fully threaded, there are no gaps between the joined components. ■ Easily completed with an electric screwdriver. ■ Suitable for wood as well. ■ Adopts a unique thread height and coarse pitch. *For more details, please refer to the PDF document or feel free to contact us.
Introducing high fluidity filling mortar suitable for filling narrow spaces and long-distance pumping.
The "Super Flow Method" is a high fluidity filling mortar that does not undergo volume change (reduction). The bleeding rate is low, at 1-2%. It also has a small heat of hydration and boasts extremely high fluidity. Please use it for filling narrow spaces and long-distance pumping. 【Features】 ■ Extremely high fluidity ■ No volume change (reduction) ■ Low bleeding rate of 1-2% ■ Small heat of hydration *For more details, please refer to the PDF document or feel free to contact us.
Lightweight, fluid, and easy to work with! It is rapidly being adopted in various areas of civil engineering.
"Air Milk and Air Mortar" are materials that have been used as fillers for abandoned pipes and other applications by mixing air bubbles into cement milk and fresh mortar. In recent years, their lightweight, fluidity, and ease of application have garnered attention. Furthermore, they are being rapidly adopted in various areas of civil engineering as a new embankment material called "Bubble Mixed Lightweight Soil - FCB Method," which offers excellent economic benefits by reducing total costs through shortened construction periods. 【FCB Construction Flow】 ■ Foundation Work ■ Waterproof Sheet and Non-woven Fabric Installation ■ Wall Installation Work ■ Joint Material and Cushion Material Installation ■ Wire Mesh Installation ■ Air Milk Pouring Work ■ Water Barrier Sheet Installation *For more details, please refer to the PDF document or feel free to contact us.
Excellence in execution.
The "Patent Yamakken NFF Method" involves performing partial color matching on defects such as honeycombing or missing areas that occur on the surface of newly poured concrete, and further reproducing patterns that match the surrounding concrete texture, allowing it to be used as a final finish.
Introduction to a highly safe cut slope reinforcement soil wall method based on the reverse winding construction method!
"PAN-WALL" is a highly safe construction method for stabilizing steep slopes and protecting the surface of natural ground using precast concrete panels, allowing for the preservation of natural slopes as much as possible due to the steep gradient. Additionally, we also offer the "Multiple Anchor Reinforced Soil Wall Method," which effectively utilizes on-site excavated soil. 【Features】 ■ Reduction of long slopes and excavation residual soil volume due to steepening (1:5 to 1:1) ■ Protection of obstacles and prevention of loosening of the ground during construction and collapse accidents through reverse construction finishing from top to bottom ■ Improvement in quality, shortening of construction period, and labor saving through precasting of surface protection works ■ Landscape adaptation through diversification of design aesthetics *For more details, please refer to the PDF materials or feel free to contact us.
Tunnel repair measures! We contribute to society by providing safety and security through new methods of infrastructure development.
The "Thin Panel Method (KB Panel Method)" involves making cut lines (2mm wide and 20mm to 30mm deep) in the concrete structure, filling those cut lines with adhesive, and then inserting and pressing the panels to secure them. It is also compatible with methods that use screws or anchor bolts for fixation. Panels are manufactured to match the shape of the tunnel, making installation easy. Additionally, it has a short construction period, minimal protrusion, and is recyclable. 【Features】 ■ Easy installation ■ Short construction period ■ Cost-effective ■ Minimal protrusion ■ Recyclable *For more details, please refer to the PDF materials or feel free to contact us.
This is a fastening device that can be attached to the support pillars of a balcony when bringing outdoor lines into a building.
When bringing outdoor lines into the house and also when bringing in optical cables from the air conditioning duct on the balcony side, there are many cases where the wall wiring becomes shorter, among other benefits. Additionally, it reduces the need for ladder work, thereby improving the safety of the operation.
Utilizing "concrete chipping treatment" with ultra-high pressure water (water jet), it can be used for various seismic reinforcement foundation works!
This is an introduction to comprehensive seismic reinforcement work centered around "concrete chipping treatment" using ultra-high-pressure jets. Without damaging the rebar, we can chip away the specified volume while ensuring adhesion strength with the sound parts, making it a foundational work for seismic reinforcement. We have been utilizing this method through joint development with management organizations and companies of various structures.
- Short construction period! - Seismic reinforcement completed with only external work! - Assigned method certification technical personnel to the headquarters (Nagoya), Tokyo branch, and Osaka branch!
As a member of the Pitacolumn Construction Method Association, we have accumulated a track record of construction achievements. Please consider us as a reliable seismic reinforcement method. ● We have assigned two certified "construction managers" in Tokyo, four in Nagoya, and three in Osaka to respond to requests from a wide area. ● The Pitacolumn (Plate Included concrete Tightly Attached column) method is one of the seismic reinforcement methods that allows reinforcement work to be carried out while the building is in use. ● The construction method involves first installing post-installed anchors at regular intervals on the existing columns to be reinforced. Steel plates (plates) are then attached to the anchors installed at a position 10 cm from the existing columns. Additionally, elliptical shear reinforcement bars (hoops) are distributed at regular intervals around these steel plates. Finally, approximately 20 cm thick concrete is poured to encase these elements, completing the work. The basic concept of Pitacolumn is to perform seismic reinforcement work without entering the interior of the building. ● Technical evaluation obtained from the Japan Architectural Disaster Prevention Association (July 13, 2001) ● Patent No. 3051071 ● Trademark Registration No. 4233798 ... Please view the comprehensive catalog on our special website ...
Achieving high-quality repairs! Chipping method using a nozzle attachment that does not require electricity.
The "Water Jet Handgun Chipping Method" allows for a high adhesion effect, making it easy to integrate with repair materials and achieve high-quality repairs. It is possible to remove weak parts of concrete without damaging the healthy parts (remaining parts) of concrete structures or existing rebar. 【Features】 ■ Gentle on the structure ■ Not affected by weather ■ Vibration-free construction ■ Non-cracking, suppressing re-deterioration after repair ■ High repair effectiveness *For more details, please refer to the PDF materials or feel free to contact us.
Economical and expressive. The beautiful Japanese climate and traditional techniques have created new tiles.
"Alpen 30" is a roof tile characterized by its beautiful form that exudes a confident elegance. It features an energy-efficient design with excellent insulation and soundproofing effects, boasting stable high quality. Additionally, it offers superior workability. Furthermore, we have developed a "ventilated tile" that does not rely on conventional auxiliary materials but is created through our unique innovations. [Features] - Boasts stable high quality - High strength with a special mortar blend - Excellent insulation and soundproofing effects with energy-efficient design - Economical and richly expressive - Superior workability *For more details, please refer to the PDF document or feel free to contact us.
An approach to resilient structures! Proposals from SE for earthquake and tsunami countermeasures.
In this document, SE is proposing the reinforcement of breakwaters using ground anchors as a measure against earthquakes and tsunamis in its environmental disaster prevention projects. The Great East Japan Earthquake that occurred on March 11, 2011, caused significant damage due to tsunamis. Coastal structures of breakwaters that did not anticipate external forces from tsunamis experienced major deformations such as toppling and washing away. On the other hand, breakwaters that demonstrated resilience, even when deformed by wave forces, contributed significantly to disaster reduction by delaying the arrival time of tsunamis to urban areas. Based on these experiences, breakwaters are required to have resilient structures, and our breakwater reinforcement anchor method is introduced as a reference technology in the "Guidelines for Tsunami Resistance Design of Breakwaters." [Contents] ■ Approach to "Resilient Structures" ■ Breakwater Reinforcement Anchor Method ■ SEEE Ground Anchor *For more details, please refer to the PDF document or feel free to contact us.
It is an inorganic paint that has obtained Patent No. 3097900 for the "WS Water Repellent Agent FC Special Construction Method."
The "WS Water Repellent FC Special Method" uses "FC Coat" as a technique to naturally reproduce the texture and feel of the surface without compromising the inherent qualities and material feel of concrete. Being inorganic, it is a special paint that adheres not only to concrete but also to the WS water repellent.
This is a method of rubbing high-strength resin mortar into the voids of drainage pavement.
The permeable resin mortar filling method (PRMS method) is a technique that involves mixing a high-performance resin binder with special particle-sized fine aggregates to create a permeable resin mortar mixture, which is then filled into the gaps between the surface aggregates of permeable pavement. This method not only strengthens the surface of permeable pavement and helps maintain and extend its functionality but also allows for repairs, further enhancing the lifespan of this valuable infrastructure while also achieving a high level of noise reduction.
A new concept that enables the movement of flexible partition walls! Introducing the next-generation floor-first construction method.
The "DFP Method" is a next-generation floor-first construction method that employs a newly developed "removable support base" for reinforcement adjusters. It allows for the installation of reinforcement adjusters under the floor without removing the pace panels, as well as the removal of panels from below. By using this method, there is no need to break the pre-floor when moving partition walls, making it easier to relocate walls and extending the period for plan changes during new construction, as well as reducing flooring costs and shortening construction time during renovations. 【Features】 ■ A new concept that enables flexible movement of partition walls ■ Adoption of reinforcement adjusters using the newly developed "removable support base" ■ No need to break the pre-floor when moving partition walls ■ Reduction of flooring costs and shortening of construction time during renovations *For more details, please refer to the PDF document or feel free to contact us.
~Small expansion amount, small play type~
The KMS joint is a load-supporting, surface steel, vertical, triangular tooth-shaped expansion device developed to adapt the technology cultivated in the Seapek joint for small expansion amounts and small gap bridges.
The deck is the lifeline of the bridge. We propose a system that promptly drains the infiltrated water from the deck without allowing it to accumulate.
【Basic Drainage】 Utilizing the road surface slope to drain water from the drainage pit. 【Supplementary Drainage】 Collecting rainwater that has permeated through the pavement into a drainer (spiral drain) installed above the waterproof layer and draining it through a quick drain. 【Emergency Drainage】 In the event that rainwater permeates into the synthetic slab, collecting it in a concrete saver installed on the lower steel plate and draining it using monitoring holes. *For more details, please contact us or download the catalog.*
A unique deep arched shape and a four-day kiln not found in other companies, this tile is strong, beautiful, and resistant to rain! *Accommodates various needs.
Durable and beautiful Koyo tiles born from taking time and care. Without forgetting the essence of tile making, which is "using good clay and firing it slowly at high temperatures," and the principle that "tiles protect the safety and security of buildings and breathe life into them," we continue to create high-quality products that satisfy our customers wholeheartedly through dedicated effort and time. 【Reasons to Choose Koyo Tiles】 ■ Commitment and passion for clay ■ Preservation of the "polishing" process ■ High-temperature firing that pursues strength ■ Unique Yokka kiln that brings quality differences ■ Distinctive deep arch shape that protects roofs ■ Ability to meet diverse needs ■ A kiln that knows construction inside and out *For more details, please contact us below or download the catalog.
We will find the water vein and construct a new well!
The "ReWell(R) Method" conducts water vein surveys before construction to avoid risks such as "digging a well but not finding water," selecting specific locations based on the results, and proposing and constructing wells that match the characteristics and intended use of the water vein. We can create wells tailored to customer needs, from small to large scale. Please feel free to contact us. 【Features】 ■ Applicable to small-diameter wells (φ400–500mm) ■ Can be transported and constructed in narrow spaces *For more details, please download the PDF or feel free to contact us.
High-performance underlayment series "Morasan" that demonstrates excellent nail hole sealing properties.
This product complies with the "Housing Defect Liability Insurance Act" and the 2009 edition of the Housing Guarantee Organization's "Standards for Design and Construction of Housing Defect Liability Insurance."
Reduce CO2 emissions by about 20% without welding! As a result, construction time and total costs can also be reduced.
"Selbon" is a groundbreaking product developed to solve the conventional construction process of creating openings (formwork production, reinforcement, curing, and formwork removal) with a single component. The reinforcement bars are modularized, reducing the workload associated with slab openings. It also eliminates the need for welding and can reduce CO2 emissions by approximately 20% compared to traditional methods. It is environmentally friendly and contributes to the SDGs. Additionally, it significantly shortens the construction timeline and reduces total costs, which are major advantages. [Features] - No need for formwork production or reinforcement around openings - Combines a rebar mesh formwork, resulting in zero industrial waste - Certified as a "Low CO2 Kawasaki Brand" product - Obtained performance certification from the Japan Building Disaster Prevention Association (No. 04-11) *For more details, please refer to the catalog. Feel free to contact us with any inquiries.
Bathroom renovation method 'Yokuhari Space' proposed by FRP waterproofing manufacturers.
The waterproof pans in bathrooms of apartment buildings that are over 20 years old pose a risk of leakage due to aging. To prevent troubles before they occur, we recommend repairing or replacing old waterproof pans. You can choose the construction method based on the shape and condition of the bathroom. Additionally, for renovations of traditional bathrooms (tiled bathrooms), "bathroom renovation space" is optimal. We will renovate the floor, walls, and ceiling of bathrooms that cannot accommodate a unit bath to have a "unit bath style."
Give new life to cast products that were forced to be exchanged or discarded!
At Kanae Co., Ltd., we independently develop fine tube brushes and tent houses. We respond to "various needs of our customers"!! The thermal welding "Arc Meister" is a welding method that utilizes short beads and peening techniques. It is particularly excellent for repairing castings. Unlike temporary measures such as metal repair agents, it provides a permanent repair, allowing for solutions without replacing equipment and facilities. By performing low-temperature metal welding, it leads to reduced repair time and cost for metal repairs. 【Features】 ■ Reduced repair time and costs for metal repairs ■ Long-term repairs and extended equipment lifespan ■ Adoption of peening method ■ Short bead welding *For more details, please refer to the catalog. Feel free to contact us with any inquiries.
