超音波システム研究所 List of Products and Services

The Ultrasonic System Research Institute has developed a technology to control the nonlinear phenomena of surface elastic waves (ultrasonic vibrations) that propagate through the target object, using an original ultrasonic system (sound pressure measurement analysis, oscillation control). << Technology to Control Nonlinear Phenomena of Ultrasound >> 1) A control setting technology that adjusts the oscillation output, waveform, and variations of the oscillation control using a function generator to match the acoustic characteristics of the target object. 2) Manufacturing technology for ultrasonic oscillation control probes that enable control of changes in ultrasonic oscillation voltage, including adjustments to the oscillation surface. 3) Manufacturing technology for ultrasonic measurement probes that make it possible to measure changes in ultrasonic vibrations at 100 megahertz, including adjustments to the oscillation surface. 4) Optimization technology for sweep oscillation conditions. Using the above technologies, we control (optimize) the propagation state of ultrasound according to the intended purpose. Note: Based on the analysis and evaluation of sound pressure data related to nonlinear phenomena concerning the interaction between the acoustic characteristics of the target object and ultrasonic oscillation control, we perform dynamic control of ultrasound (measurements, analysis, confirmation, and evaluation of sound pressure are conducted using an ultrasonic tester).

• Non-destructive testing
• Vibration and Sound Level Meter
• others

The Ultrasonic System Research Institute conducts the following activities with its original product: ultrasonic systems (sound pressure measurement analysis, oscillation control): 1) Manufacturing and sales of ultrasonic systems (sound pressure measurement analysis, oscillation control) 2) Consulting services for various equipment (Note): cleaning machines, stirring devices, processing equipment, machine tools, plating equipment, welding equipment, etc. << Manufacturing and Sales >> 1) Original product: Ultrasonic system (sound pressure measurement analysis, oscillation control) System overview (standard system): - Ultrasonic tester NA 10MHz type - Oscillation system 20MHz type 2) Degassing fine bubble generation liquid circulation device Device overview: - Magnetic pump (Iwaki Magnetic Pump MD series MD-70RZ) - Timer - Hose and others 3) Others (On-site support: delivery, installation, operation explanation, etc.) Consulting fees (Estimates will be proposed according to the conditions of the on-site visit) Ultrasonic propagation characteristics: 1) Vibration mode detection (auto-correlation) 2) Nonlinear phenomenon detection (bispectrum) 3) Response characteristic detection (analysis of impulse response) 4) Interaction detection (analysis of power contribution rate)

• pump
• Non-destructive testing
• Other measuring instruments

Application of technology to analyze and evaluate the dynamic characteristics of ultrasound The Ultrasound System Research Institute has developed a method (system) for the <analysis, experimentation, and evaluation> of ultrasound, utilizing "measurement, analysis, and control" technology related to the nonlinearity of ultrasound. Using this technology, we conduct <sound pressure measurement, experimentation, analysis, and evaluation> (including on-site support) for ultrasonic cleaning machines. To evaluate the complex and varying usage conditions of ultrasound, we do not rely solely on sound pressure and frequency; instead, we consider "timbre." We analyze it using a time series data autoregressive model and report and propose <evaluation and application> based on statistical models.

• pump
• Turbid water and muddy water treatment machines
• Manufacturing Technology

The Ultrasonic System Research Institute has developed a technology that applies "measurement, analysis, and control" techniques related to the nonlinearity of ultrasound to analyze and evaluate the dynamic characteristics of ultrasonic vibrations propagating through various media (elastic bodies, liquids, gases). This technology optimizes interactions related to cleaning objects, tools, ultrasonic transducers, water tanks, and liquid circulation according to specific objectives. By utilizing ultrasonic oscillation control probes and ultrasonic testers, we have developed optimization techniques for ultrasonic applications through the examination of various relationships and response characteristics (Note: power contribution rate, impulse response, etc.) based on previous oscillation, measurement, and analysis. Regarding the measurement and analysis of ultrasound, the setting of sampling time and other parameters utilizes original simulation technology. This technology is provided as consulting services for the optimization of ultrasonic systems (cleaning, stirring, processing, etc.).

• others
• Other analytical equipment
• Traceability

The Ultrasonic System Research Institute will conduct an ultrasonic seminar as follows: While confirming actual cases through videos, let's deepen our understanding of the basics of ultrasonic cleaning and the cleaning (surface treatment) of new materials and new processing! Instructor: Kazuyuki Saiki Representative, Ultrasonic System Research Institute Mechanical Engineering, System Technology Date: [Month] [Day], 2024, 13:00 - 16:00 Target: Only one company Tuition Fee: 33,000 yen (including tax), which includes the cost of materials. Venue: Online course Online conditions and number of participants to be discussed separately. Regarding the content We will propose themes, cleaning levels, and technical content tailored to your needs.

• Other measuring instruments
• others
• Scientific Calculation and Simulation Software

The Ultrasonic System Research Institute will conduct online individual consulting as follows: Participants: 1 company (available range for Microsoft Teams meeting) Cost: 30,000 yen (including tax 33,000 yen) Duration: 150 minutes (e.g., 9:30 AM - 12:00 PM, 1:00 PM - 3:30 PM) Schedule: To be arranged Others: 1) Please use a PC 2) Use of Zoom and Microsoft Teams meeting <Purpose of the Event> ■ Introduction We will conduct online consulting for one participating company (or within the available range for Microsoft Teams meeting). Regarding the use of ultrasound, we will provide specific know-how explanations and discussions based on experience and achievements. If you are interested, please contact us via email. We will propose consulting on your desired theme.

• others
• Non-destructive testing
• Water Treatment

<<Deaeration Fine Bubble Generation Liquid Circulation Device>> 1) By narrowing the suction side of the pump, cavitation is generated. 2) Cavitation causes bubbles of dissolved gas to form. The above describes the state of the deaeration liquid circulation device. 3) When the concentration of dissolved gas decreases, the bubble size of the dissolved gas due to cavitation becomes smaller. 4) Through appropriate liquid circulation, fine bubbles of less than 20μ are generated. The above describes the state of the deaeration microbubble generation liquid circulation device. 5) When ultrasonic waves are applied to the above-mentioned deaeration fine bubble generation liquid circulation device, the ultrasonic waves disperse and crush the fine bubbles, and when measuring the fine bubbles, the distribution of ultrafine bubbles becomes greater than that of fine bubbles. The above state indicates that ultrasonic waves can be stably controlled. 6) In the state where ultrasonic waves can be stably controlled, the original product: a megahertz ultrasonic oscillation control probe is used to control the oscillation of megahertz (1-20 MHz) ultrasonic waves. The method of controlling the sound pressure level is achieved by controlling the original nonlinear resonance phenomenon of liquid circulation and megahertz ultrasonic waves, setting and controlling it to an effective dynamic state.

• Other measuring instruments
• Water Treatment
• others

The Ultrasonic System Research Institute is developing an effective "Ultrasonic Oscillation Control System" based on a statistical approach using abstract algebra in relation to the utilization of ultrasound. Regarding the statistical approach, statistical mathematics has both abstract and concrete aspects, and through contact with concrete entities, abstract ideas or methods are developed; this is the characteristic of statistical mathematics. In the research of ultrasound, "a statistical perspective is essential to stabilize the effects of cavitation." About the model: Models are constructed with the aim of effectively advancing understanding, prediction, control, etc., regarding the subject. Constructing an accurate model is difficult, and the examination progresses with representations that appropriately "round off" the complexity of the subject. In that sense, the process of constructing or building a model requires statistical thinking. Propagation characteristics of ultrasound: 1) Detection of vibration modes (changes in self-correlation) 2) Detection of nonlinear phenomena (changes in bispectrum) 3) Detection of response characteristics (analysis of impulse response) 4) Detection of interactions (analysis of power contribution rates)

• others
• pump
• Water Treatment

The Ultrasonic System Research Institute has made it possible to control the nonlinear propagation of ultrasound by analyzing and applying measurement, analysis, and control techniques related to the propagation state of ultrasound as the acoustic characteristics of the target object. As a result, we have developed a technology that efficiently alleviates residual stress on the surface of components and homogenizes the entire surface. This technology for alleviating surface residual stress improves the fatigue strength against metal fatigue and achieves uniformity in various surface treatments. In particular, by considering the guided waves (surface elastic waves) of the target object in the setting and control of the ultrasound propagation state, we have developed control methods, tools, and systems that realize effective dynamic changes in the target object as a stimulus within a certain range that includes nonlinear phenomena. We have confirmed a wide range of effects on various surfaces of metal parts, plastic parts, and powder materials. This is a new surface treatment technology using ultrasound, which, including the general effects based on acoustic characteristics, can be utilized and developed as a distinctive inherent operational technology for the development of new materials, stirring, dispersion, cleaning, and chemical reaction experiments.

• Other measuring instruments
• others
• Water Treatment

The Ultrasonic System Research Institute has developed a technology to control nonlinear ultrasonic phenomena by utilizing the interactions generated from simultaneously oscillating two types of ultrasonic probes from one oscillation channel of a function generator. (Note: Nonlinear (resonance) phenomena refer to the resonance phenomenon of ultrasonic vibrations that occurs due to the generation of harmonics resulting from original oscillation control, achieving high amplitudes through resonance.) By optimizing the ultrasonic propagation characteristics of various materials to suit specific purposes, efficient ultrasonic oscillation control becomes possible. Through the measurement and analysis of sound pressure data from ultrasonic testers, this system technology allows for the dynamic changes of surface elastic waves to be controlled according to their intended use. In practical terms, the use of multiple (two types of) ultrasonic probes for multiple (two types of) oscillations (sweep oscillation, pulse oscillation) generates complex vibration phenomena (original nonlinear resonance phenomena), achieving high sound pressure propagation states at high frequencies, or low frequency propagation states with high sound pressure levels tailored to the desired natural frequency.

• Non-destructive testing
• Vibration and Sound Level Meter
• others

The Ultrasonic System Research Institute has developed measurement, analysis, and evaluation techniques regarding the effects of changes from standard sizes on ultrasonic propagation states for standard-type ultrasonic devices that allow for easy ultrasonic control. By applying this technology, we manufacture, develop, and provide consulting for ultrasonic systems tailored to the desired tank size. Device Overview * Ultrasonic System (Ultrasonic Cleaner) 1: Ultrasonic 2: Ultrasonic Tank 3: Circulation Pump (Deaeration and Microbubble Generation Liquid Circulation System) 4: Timer Ultrasonic Propagation Characteristics 1) Detection of Vibration Modes (Changes in Autocorrelation) 2) Detection of Nonlinear Phenomena (Changes in Bispectrum) 3) Detection of Response Characteristics (Analysis of Impulse Response) 4) Detection of Interactions (Analysis of Power Contribution Rate) Note: "R" is a free statistical processing language and environment autcor: Autocorrelation Analysis Function bispec: Bispectrum Analysis Function mulmar: Impulse Response Analysis Function mulnos: Power Contribution Rate Analysis Function

• others

The Ultrasonic System Research Institute provides consulting services for the manufacturing and development methods of ultrasonic cleaning machines using a "degasified fine bubble (microbubble) generation liquid circulation device" that can efficiently control ultrasonic waves. Ultrasonic Cleaning Machine (Degasified Fine Bubble Generation Liquid Circulation System) －－Ultrasonic Cleaning System KT0600K－－ 1) Cleaning Tank Material: SUS304 (t = 3.0 mm) Dimensions (internal): W530 × D530 × H370 mm 2) Liquid Circulation Degasified fine bubble generation liquid circulation system Nominal flow rate: 12-30 L/MIN 3) Ultrasonic (Power Supply: AC 100V) MU-300 Transducer Size: 260 × 150 × 90 mm Oscillator Size: 320 × 420 × 145 mm Frequency 1) 28 kHz Output: 300W (MAX) Frequency 2) 40 kHz Output: 300W (MAX) Frequency 3) 72 kHz Output: 300W (MAX)

• Scientific Calculation and Simulation Software

The Ultrasonic System Research Institute conducts consulting related to ultrasonic applications using a technology that measures, analyzes, and evaluates the propagation state of ultrasound, applying feedback analysis techniques based on multivariate autoregressive models. By organizing the measurements, analyses, and results obtained using ultrasonic testers in chronological order, we establish and confirm new evaluation criteria (parameters) that indicate the appropriate ultrasonic state for specific purposes. Note: - Nonlinear characteristics (dynamic characteristics of acoustic flow) - Response characteristics - Fluctuation characteristics - Effects due to interactions By developing original measurement and analysis methods that consider the acoustic properties of the target object and surface elastic waves, we deepen our understanding of the relationships between various effects related to vibration phenomena, drawing on the principles of statistical mathematics. As a result, there is an increasing number of cases demonstrating that new nonlinear parameters are highly effective regarding the propagation state of ultrasound and the surface of the target object. In particular, evaluation cases related to cleaning, processing, and surface treatment effects lead to successful control and improvement based on good confirmations.

• others

The Ultrasonic System Research Institute has developed a "Fundamental Experimental System" related to ultrasonic cleaning that applies the "ultrasonic system using degassing and microbubble control." - Experimental examples of the developed system - Confirmation of the cleaning effect of cavitation Confirmation of the acceleration effect Confirmation of the cleaning effect by acoustic flow Confirmation of the cleaning effect by liquid circulation Confirmation of the interaction between cavitation and liquid circulation Confirmation of the interaction between the cleaning object and the cleaning tank ..... Ultrasonic propagation characteristics 1) Detection of vibration modes (changes in autocorrelation) 2) Detection of nonlinear phenomena (changes in bispectrum) 3) Detection of response characteristics (analysis of impulse response) 4) Detection of interactions (analysis of power contribution rates) Note: "R" is a free statistical processing language and environment autocor: autocorrelation analysis function bispec: bispectrum analysis function mulmar: impulse response analysis function mulnos: power contribution rate analysis function

• others
• Other analytical equipment
• Water Treatment

Features (for standard specifications) * Measurement (analysis) frequency range Specification: 0.1 Hz to 10 MHz * Ultrasonic oscillation Specification: 1 Hz to 100 kHz * Capable of measuring surface vibrations * Continuous measurement for 24 hours * Simultaneous measurement of any two points * Display of measurement results in graph form * Attached software for time series data analysis This is a measurement system using an ultrasonic probe. The ultrasonic probe is attached to the target object for oscillation and measurement. The measured data is analyzed considering position, state, and elastic waves, detecting various acoustic performances. Ultrasonic Probe: Outline Specifications Measurement range: 0.01 Hz to 10 MHz Oscillation range: 1 kHz to 25 MHz Propagation range: 1 kHz to over 900 MHz Materials: Stainless steel, LCP resin, silicone, Teflon, glass... Ultrasonic Propagation Characteristics 1) Detection of vibration modes (changes in self-correlation) 2) Detection of nonlinear phenomena (changes in bispectrum) 3) Detection of response characteristics (analysis of impulse response) 4) Detection of interactions (analysis of power contribution rates)

• others
• Other measuring instruments
• Non-destructive testing

The Ultrasonic System Research Institute has developed a completely new dynamic control technology for ultrasound using two function generators. This technology enables the control of ultrasonic nonlinear phenomena and resonance phenomena through different types of (sweep) oscillation using two different waveforms. By applying this technology, we are developing practical methods to relieve surface residual stress in components and various application technologies, and we provide consulting services. Standard settings: 1) Sweep oscillation control from 3 MHz to 20 MHz 2) Sweep oscillation control from 60 kHz to 13 MHz 3) Ultrasonic dynamic control using a 42 kHz 35W ultrasonic cleaner (realizing dynamic fluctuation-type ultrasonic propagation control) Note: Regarding the surface of the ultrasonic cleaner's tank, surface residual stress relief and uniform treatment are performed using an ultrasonic oscillation control probe and a degassing fine bubble generation liquid circulation device. As a result of the uniformization effect, ultrasonic control using harmonics above 200 MHz has been achieved.

• Scientific Calculation and Simulation Software
• Vibration and Sound Level Meter
• others

The Ultrasonic System Research Institute has developed a completely new technology for controlling the propagation state of surface elastic waves using its original product (ultrasonic tester). The ultrasonic sound pressure measurement and analysis technology developed so far will apply measurement, analysis, and evaluation techniques related to nonlinear phenomena in ultrasonics. It has become possible to implement new countermeasures based on vibration phenomena concerning vibrations and noise from buildings and roads, equipment, devices, walls, pipes, desks, handrails... as well as the vibrations at the moment of metal melting during welding and instantaneous vibrations during machining. Consulting services are available for this technology. Note: The following tools will be used for analysis Note: OML (Open Market License) Note: TIMSAC (TIMe Series Analysis and Control program) Note: "R," a free statistical processing language and environment autcor: autocorrelation analysis function bispec: bispectrum analysis function mulmar: impulse response analysis function mulnos: power contribution rate analysis function

• Scientific Calculation and Simulation Software
• Vibration and Sound Level Meter
• others

The Ultrasonic System Research Institute manufactures and sells a system that combines the "Ultrasonic Tester NA (recommended type)," which allows for easy measurement and analysis of ultrasound, and the "Ultrasonic Oscillation System (20 MHz)," which enables easy control of ultrasonic oscillation. We propose system configurations (custom-made ultrasonic probes) tailored to the intended use (price and performance: cleaning, processing, stirring, inspection, etc.). Original Products: System Overview (Standard System) - Ultrasonic System (Sound Pressure Measurement and Analysis, Oscillation Control 10 MHz Type) - Ultrasonic Tester NA 10 MHz Type - Oscillation System 20 MHz Type Price: 281,050 yen (including tax: 10% consumption tax)

• Vibration and Sound Level Meter
• Non-destructive testing
• others

Technology for Evaluating the Dynamic Characteristics of Ultrasonic Probes We offer consulting services for this technology. If you are interested, please contact us via email. By utilizing the acoustic properties (surface elastic waves) of various materials (glass containers, etc.), we have confirmed the effects of ultrasonic stimulation on structures, machine tools, and various manufacturing lines, even in a 5000-liter water tank with ultrasonic output below 20W. This was developed as a method for controlling and applying nonlinear phenomena through an engineering (experimental and technical) perspective on elastic wave motion and an ultrasonic model from abstract algebra. The key point is the technology for utilizing surface elastic waves on ultrasonic element surfaces. By confirming the propagation characteristics of ultrasound based on the conditions of the target object (material, shape, structure, size, quantity, etc.), it is important to address it as an original nonlinear resonance phenomenon. Note 1: Propagation characteristics of ultrasound Propagation characteristics of ultrasonic probes: 1) Detection of vibration modes (changes in self-correlation) 2) Detection of nonlinear phenomena (changes in bispectrum) 3) Detection of response characteristics (analysis of impulse response characteristics) 4) Detection of interactions (analysis of power contribution rates)

• Scientific Calculation and Simulation Software
• Vibration and Sound Level Meter
• others

The Ultrasonic System Research Institute has developed a technology to control the nonlinear phenomena of surface elastic waves (ultrasonic vibrations) that propagate through the target object, using an original ultrasonic system (sound pressure measurement analysis, oscillation control). **Technology for Controlling Nonlinear Ultrasonic Vibration Phenomena** 1) Control setting technology that adjusts the oscillation output, waveform, and variations of the oscillation control using a function generator, tailored to the acoustic characteristics of the target object. 2) Manufacturing technology for an ultrasonic oscillation control probe that enables control of changes in ultrasonic oscillation voltage, including adjustments to the oscillation surface. 3) Manufacturing technology for an ultrasonic measurement probe that allows for the measurement of changes in ultrasonic vibrations at 100 megahertz, including adjustments to the oscillation surface. 4) Optimization technology for sweep oscillation conditions. Using the above technologies, we control (optimize) the propagation state of ultrasonic waves according to specific objectives. Note: The dynamic control of ultrasonic waves is performed based on the analysis and evaluation of sound pressure data related to nonlinear phenomena, considering the interaction between the acoustic characteristics of the target object and ultrasonic oscillation control. (Sound pressure measurement, analysis, confirmation, and evaluation are conducted using an ultrasonic tester.)

• Analysis and prediction system
• Other measuring instruments
• others

The Ultrasonic System Research Institute has developed a technology for ultrasonic <dynamic control> that optimizes the interaction of ultrasonic vibrations based on various analysis results of ultrasonic propagation states using an original ultrasonic system and an abstract algebra model. Note: The control of resonance phenomena (low harmonics) and nonlinear phenomena (high harmonics) is achieved by setting oscillation control conditions based on a logical model. In contrast to existing control technologies, this technique establishes and implements optimal control states tailored to the purposes of ultrasonic applications (cleaning, stirring, processing, etc.) through new measurement and evaluation parameters (note) concerning the entire propagation path of ultrasonic vibrations, including various propagation tools. This is a method and technology that can be applied immediately, and we offer it as consulting services (there is an increasing track record of precision cleaning and stirring at the nano level). Note: Using original technology (ultrasonic tester), we measure, analyze, and evaluate dynamic changes in the propagation state of water tanks, transducers, target objects, and tools, among others. (Parameters: power spectrum, autocorrelation, bispectrum, power contribution rate, impulse response characteristics, etc.)

• Scientific Calculation and Simulation Software
• Non-destructive testing
• others

The Ultrasonic System Research Institute has developed a new component inspection technology using megahertz ultrasonic oscillation, based on its track record of analyzing ultrasonic data propagating on the surface of target objects. This method applies the measurement and analysis technology of "sound pressure and vibration" through the control of original ultrasonic probe oscillation. We provide consulting and explanations of ultrasonic evaluation technology by developing ultrasonic probes tailored to the purpose (vibration modes propagating on the surface of target objects). This is an application of new ultrasonic oscillation control technology. By utilizing nonlinear phenomena related to megahertz ultrasonic propagation states that match the acoustic characteristics of the target object, it is possible to detect new features regarding the surface condition of the target object. In particular, this fundamental technology serves as a new evaluation parameter for ultrasonic vibration, utilized in surface inspection of substrate components and preliminary evaluation of precision cleaning parts, based on the response characteristics derived from combinations of oscillation and reception. By measuring, analyzing, and evaluating the dynamic characteristics of ultrasonic waves related to surface elastic wave propagation phenomena, we have enabled effective utilization tailored to the purpose (evaluation) by constructing and modifying logical models.

• Other measuring instruments
• Non-destructive testing
• others

This seminar is an in-person event with a maximum capacity of 10 participants. The Ultrasonic System Research Institute will hold an ultrasonic seminar as follows: Title: "Analysis of Ultrasonic Sound Pressure Measurement and Oscillation Control Technology" We will provide a detailed explanation of the know-how related to ultrasonic cleaning, stirring, and processing using fine bubbles, along with demonstrations using the "Ultrasonic Tester NA (200MHz)" for easy measurement analysis and the "Ultrasonic Oscillation System (20MHz)" for easy oscillation control! Date: **Month** **Day**, 2024, 13:00 - 16:00 Venue: Tokyo Tama Mirai Messe (Tokyo Metropolitan Tama Industry Exchange Center) Room 7 (Capacity: 27 participants) Price (including tax): 18,700 yen (Base price: 17,000 yen) - For simultaneous applications of 2 participants: 33,000 yen (Base price for 2 participants: 30,000 yen) Organizer: Ultrasonic System Research Institute

• Scientific Calculation and Simulation Software
• Vibration and Sound Level Meter
• others

The Ultrasonic System Research Institute has developed applied technology that utilizes surface acoustic waves through ultrasonic control. By combining ultrasound and surface acoustic waves, we achieve dynamic control of ultrasonic propagation. The key point is the ability to efficiently control nonlinear phenomena caused by surface acoustic waves. As specific technologies, we have developed system technologies that control nonlinear phenomena (bisectional spectrum) resulting from the interaction of ultrasound with water tanks and tools, tailored to specific purposes (cleaning, stirring, stress relief, inspection, etc.). As a result of utilizing measurement and analysis techniques for ultrasonic propagation states, we have confirmed the realization of harmonic control and the ability to adjust nonlinear phenomena. The know-how lies in confirming and responding to the acoustic characteristics of the system (measurement, analysis, evaluation).

• Scientific Calculation and Simulation Software
• Other measuring instruments
• others

The Ultrasonic System Research Institute has developed a method (system) for the analysis and evaluation of ultrasound, applying "measurement, analysis, and control" technology related to the nonlinearity of ultrasound. We are providing on-site support for the additional installation of a degassing fine bubble generation liquid circulation system utilizing this technology. To utilize (control) the complex and changing conditions of ultrasound in a stable manner, we offer on-site services to add and confirm sound pressure measurements for the degassing fine bubble generation liquid circulation system in specific tanks present at the site. **Explanation of Degassing Fine Bubble Generation Liquid Circulation Technology** By ensuring appropriate liquid circulation and the diffusibility of fine bubbles, a uniform state of cleaning liquid is achieved. Ultrasound propagates through the uniform liquid, generating a stable state of ultrasound. From this state, liquid circulation control is performed to realize the desired ultrasonic effects (propagation state). This involves achieving a uniform sound pressure distribution throughout the tank, optimizing ultrasound, liquid circulation pumps, fine bubbles, etc. The operational control becomes the know-how for individual tanks.

• Other measuring instruments
• Non-destructive testing
• others

The Ultrasonic System Research Institute has developed technology to manufacture ultrasonic probes that can control ultrasonic propagation states from 500 Hz to over 500 MHz, tailored to specific applications. Ultrasonic Probe: Overview Specifications Measurement Range: 0.01 Hz to 200 MHz Oscillation Range: 1.0 kHz to 25 MHz Propagation Range: 0.5 kHz to over 900 MHz (confirmed through acoustic pressure data analysis) Materials: Stainless steel, LCP resin, silicon, Teflon, glass, etc. Oscillation Equipment: Example - Function Generator By understanding the acoustic properties of metals, resins, glass, etc., and through oscillation control, we achieve propagation states tailored to specific purposes regarding acoustic pressure levels, frequencies, and dynamic characteristics. This is a new foundational technology for precision cleaning, processing, stirring, and inspection based on measurement, analysis, and evaluation techniques for ultrasonic propagation states. By utilizing the acoustic properties of various materials, ultrasonic stimulation can be controlled for structures and machine tools weighing several tons, even in a 3000-liter water tank, with ultrasonic output below 20 W. It was developed as an application method for nonlinear phenomena through an engineering (experimental and technical) perspective on elastic waves and an abstract algebraic ultrasonic model.

• others
• Other measuring instruments
• Water Treatment

The Ultrasonic System Research Institute has developed a completely new <vibration measurement technology> using its original product (ultrasonic tester). The ultrasonic sound pressure measurement analysis technology developed so far applies the "measurement, analysis, and control" technology related to the nonlinear phenomena of ultrasound. From the accumulation of data measuring, analyzing, and evaluating the dynamic characteristics of ultrasound propagating on surfaces, we have developed technology that can <measure, analyze, and evaluate> vibration states from low frequencies (0.001 Hz) to high frequencies (700 MHz). Regarding vibrations and noise from buildings and roads, equipment, devices, walls, piping, desks, handrails... as well as the vibrations at the moment of metal melting during welding and instantaneous vibrations during machining, we have made it possible to respond with vibration control and management based on the measurement and analysis of new vibration phenomena. This is a new method and technology, and various application cases have developed from the analysis results so far. In particular, continuous data collection for a standard measurement time of 72 hours is possible, allowing measurement of low-frequency vibrations and irregularly fluctuating vibrations (maximum measurement can be overwritten over a continuous period of 14 days).

• Non-destructive testing
• Other measuring instruments
• others

The Ultrasonic System Research Institute has developed a completely new dynamic control technology for ultrasound by utilizing two function generators. By generating oscillations with two different waveforms (sweep), we have achieved a technique to control the nonlinear phenomena of ultrasound. Note: The generation of (10th order and higher) harmonics caused by original oscillation control is realized by resonating with low-frequency vibration phenomena, resulting in the generation of high-amplitude harmonics, which is a nonlinear (resonance) phenomenon of ultrasonic vibrations. By optimizing the ultrasonic propagation characteristics of various components according to their intended purpose, efficient ultrasonic oscillation control becomes possible. Through the measurement and analysis of sound pressure data from ultrasonic testers, this system technology allows for the dynamic control of surface elastic wave changes according to the intended application. Practically, multiple (two types of) ultrasonic probes generate multiple (two types of) oscillations (sweep oscillation, pulse oscillation), which create complex vibration phenomena (original nonlinear resonance phenomena), achieving high sound pressure propagation states at high frequencies or low sound pressure levels at frequencies matched to the desired natural frequency.

• Vibration and Sound Level Meter
• Non-destructive testing
• Analysis and prediction system

The Ultrasonic System Research Institute (located in Hachioji, Tokyo) has developed a completely new vibration measurement technology using its original product (ultrasonic tester). The ultrasonic sound pressure measurement analysis technology developed so far applies "measurement, analysis, and control" techniques related to the nonlinear phenomena of ultrasound. From the accumulation of data measuring, analyzing, and evaluating the dynamic characteristics of ultrasound propagating on surfaces, we have developed a technology that can measure, analyze, and evaluate vibration states from low frequencies (0.1 Hz) to high frequencies (200 MHz). This technology enables new countermeasures based on new vibration phenomena concerning vibrations and noise from buildings and roads, equipment, devices, walls, pipes, desks, handrails, and the moment of metal melting during welding, as well as instantaneous vibrations during machining. This is a new method and technology, and various application cases have developed from the analysis results obtained so far. In particular, continuous data collection for a standard measurement time of 72 hours is possible, allowing measurement of very low-frequency vibrations and irregularly fluctuating vibrations.

• Other measuring instruments
• others

The Ultrasonic System Research Institute has developed "ultrasonic control technology" that dynamically controls nonlinear phenomena related to ultrasonic propagation by utilizing a small pump for liquid circulation. Nonlinear phenomena are evaluated through analysis using an ultrasonic tester. The complex changes in ultrasound (such as ultrasonic cleaners, ultrasonic probes, etc.) are confirmed through time-series data analysis of sound pressure from ultrasonic oscillation and reception, identifying various interactions. Based on the confirmation of these interactions, the oscillation control conditions using ultrasonic probes are optimized, achieving a dynamic ultrasonic control system tailored to specific objectives. In practical applications, such as ultrasonic cleaning, the ON/OFF control (or control of flow rate and velocity, etc.) of the current liquid circulation device is optimized by considering the ultrasonic propagation characteristics related to the installation state of the device and the surface elastic waves of the target object, including the output, oscillation frequency, and control conditions of the ultrasound. In particular, by utilizing the vibration characteristics of the pump to alternately circulate liquid and gas, new nonlinear effects of ultrasound and microbubbles are realized.

• Scientific Calculation and Simulation Software
• Vibration and Sound Level Meter
• Non-destructive testing

The Ultrasonic System Research Institute has developed ultrasonic oscillation control technology that enables the utilization of ultrasonic propagation states above 100 MHz by applying a function generator and ultrasonic probe to ultrasonic cleaners. This is a new application technology for precision cleaning, processing, and stirring, based on the measurement, analysis, evaluation, and technology of ultrasonic propagation states. By utilizing the acoustic properties (surface elastic waves) of various materials, it is possible to control ultrasonic stimulation above 100 MHz to the target object with an ultrasonic output of less than 20 W, even in a 1000-liter water tank. This was developed as an application method for nonlinear phenomena through an engineering (experimental and technical) perspective on elastic waves and an abstract algebraic ultrasonic model. The key point is to confirm the ultrasonic propagation characteristics of the target object, and it is important to set the oscillation conditions of the function generator as a control method for the original nonlinear resonance phenomenon (Note 1). Note 1: Original Nonlinear Resonance Phenomenon This refers to the resonance phenomenon of ultrasonic vibrations that occurs when the generation of harmonics caused by original oscillation control is realized at a high amplitude due to resonance phenomena.

• Other measuring instruments
• Analysis and prediction system
• others

The Ultrasonic System Research Institute focuses on the following technologies: - Measurement technology for ultrasonic propagation states (Original product: Ultrasonic Tester) - Analysis technology for ultrasonic propagation states (Nonlinear analysis system for time-series data) - Optimization technology for ultrasonic propagation states (Optimization processing of sound and ultrasound) - Manufacturing technology for megahertz ultrasonic oscillation probes - Control technology for surface acoustic waves ... Utilizing the above technologies, we are developing and applying control technology for ultrasound (nonlinear resonance phenomena) using the combination of sound and ultrasound. Note: Original nonlinear resonance phenomenon The generation of harmonics caused by original oscillation control, realized at high amplitudes through resonance phenomena, results in ultrasonic vibrations (resonance phenomena of harmonics above the 10th order). Ultrasonic propagation characteristics: 1) Detection of vibration modes (changes in autocorrelation) 2) Detection of nonlinear phenomena (changes in bispectrum) 3) Detection of response characteristics (analysis of impulse response) 4) Detection of interactions (analysis of power contribution rates) Note: "R" free statistical processing language and environment autcor: autocorrelation bispec: bispectrum mulmar: impulse response mulnos: power contribution rate

• Vibration and Sound Level Meter
• Non-destructive testing
• Scientific Calculation and Simulation Software

The Ultrasonic System Research Institute manufactures and sells a system that combines the "Ultrasonic Tester NA (recommended type)," which allows for easy measurement and analysis of ultrasonic waves, and the "Ultrasonic Oscillation System (20MHz)," which facilitates easy control of ultrasonic oscillation. We propose system configurations (custom-made ultrasonic probes) tailored to the intended use (price and performance: cleaning, processing, stirring, inspection, etc.). Original products: Ultrasonic System (sound pressure measurement and analysis, oscillation control, 10MHz type) Model number: US-2022xxxx System Overview (Standard System): - Ultrasonic Tester NA 10MHz type - Oscillation System 20MHz type Ultrasonic Probe: Outline Specifications Measurement Range: 0.01Hz to 100MHz Oscillation Range: 1kHz to 25MHz Propagation Range: 1kHz to over 900MHz Materials: Stainless steel, LCP resin, silicone, Teflon, glass, etc. Oscillation Equipment Example: Function Generator Ultrasonic Propagation Characteristics: 1) Detection of vibration modes 2) Detection of nonlinear phenomena 3) Detection of response characteristics 4) Detection of interactions

• Scientific Calculation and Simulation Software
• Analysis and prediction system
• others

The Ultrasonic System Research Institute has developed manufacturing technology for ultrasonic probes that can control ultrasonic propagation states above 900 MHz, based on the classification of ultrasonic propagation phenomena. We can manufacture and develop original ultrasonic oscillation control probes tailored to specific purposes. The key point is to confirm the ultrasonic propagation characteristics of the ultrasonic probes. The response characteristics to dynamic changes in ultrasonic waves are the most important. This characteristic determines the range of possible harmonic generation. Currently, we can manufacture for the following range: Ultrasonic Probe: Overview Specifications - Measurement Range: 0.01 Hz to 200 MHz - Oscillation Range: 1.0 kHz to 25 MHz - Propagation Range: 0.5 kHz to over 900 MHz (confirmation of sound pressure data analysis) - Materials: Stainless steel, LCP resin, silicone, Teflon, glass, etc. - Oscillation Equipment: Example - Function Generator By understanding (measuring, analyzing, evaluating) the acoustic characteristics based on materials, shapes, and structures, we realize the desired ultrasonic propagation states. We offer consulting services for this technology. If you are interested, please contact us via email.

• Analysis and prediction system
• others
• Vibration and Sound Level Meter

The Ultrasonic System Research Institute has developed a completely new dynamic control technology for ultrasound by utilizing two function generators. Through oscillation with two different waveforms (sweep), we have realized a technology to control the nonlinear phenomena of ultrasound. Note: Nonlinear (resonance) phenomena By generating (10th order and higher) harmonics through original oscillation control and resonating with low-frequency vibration phenomena, we have achieved the generation of high-amplitude harmonics, which is the nonlinear (resonance) phenomenon of ultrasonic vibrations. By optimizing the ultrasonic propagation characteristics of various materials according to their intended use, efficient ultrasonic oscillation control becomes possible. Through the measurement and analysis of sound pressure data from ultrasonic testers, this is a system technology that controls the dynamic changes of surface elastic waves according to the intended purpose.

• Scientific Calculation and Simulation Software
• Vibration and Sound Level Meter
• others

The Ultrasonic System Research Institute has developed a completely new dynamic control technology for ultrasound by utilizing two function generators. This technology enables the control of nonlinear ultrasonic phenomena through oscillation (sweep) with two different waveforms. Note: Nonlinear (resonance) phenomena By generating higher harmonics (above the 10th order) through original oscillation control and resonating with low-frequency vibration phenomena, the generation of high-amplitude harmonics has been achieved, resulting in nonlinear (resonance) phenomena of ultrasonic vibrations. By optimizing the ultrasonic propagation characteristics of various components according to their intended purpose, efficient ultrasonic oscillation control becomes possible. Through the measurement and analysis of sound pressure data from ultrasonic testers, this system technology allows for the dynamic control of surface elastic wave changes according to the intended use. Ultrasonic propagation characteristics: 1) Detection of vibration modes (changes in autocorrelation) 2) Detection of nonlinear phenomena (changes in bispectrum) 3) Detection of response characteristics (analysis of impulse response) 4) Detection of interactions (analysis of power contribution rates)

• Scientific Calculation and Simulation Software
• Vibration and Sound Level Meter
• others

The Ultrasonic System Research Institute has developed ultrasonic system technology that enables control of ultrasonic propagation states from 1 to 900 MHz by utilizing a megahertz ultrasonic oscillation control probe for ultrasonic equipment. This is a new application technology for precision cleaning, processing, stirring, welding, and plating, based on the measurement, analysis, evaluation, and technology of ultrasonic propagation states. By utilizing the acoustic properties (surface elastic waves) of various materials, ultrasonic stimulation can be controlled for several tons of objects even in a 1000-liter water tank with an ultrasonic output of less than 20W. It was developed as an application method for nonlinear phenomena through an engineering (experimental and technical) perspective on elastic wave phenomena and an abstract algebraic ultrasonic model. The key point is the use of tools (elastic bodies: metal, glass, resin). By confirming the ultrasonic propagation characteristics based on the conditions of the target object, it is important to address it as an original nonlinear resonance phenomenon (Note 1). Note 1: Original Nonlinear Resonance Phenomenon This occurs when the generation of harmonics caused by original oscillation control is realized at high amplitudes through resonance phenomena, resulting in ultrasonic vibration resonance phenomena.

• Scientific Calculation and Simulation Software
• Other measuring instruments
• others

The Ultrasonic System Research Institute (located in Hachioji City, Tokyo) has developed the Ultrasonic Tester NA (100MHz oscilloscope type), which makes ultrasonic measurement and analysis easy. Features (Standard Specifications) - Measurement (Analysis) Frequency Range: 0.1Hz to 10MHz - Ultrasonic Oscillation: 1Hz to 1MHz - Capable of measuring surface vibrations - Continuous measurement for 24 hours - Simultaneous measurement of any two points - Display of measurement results in graph form - Attached software for time-series data analysis This is a measurement system using ultrasonic probes. The ultrasonic probe is attached to the target object for oscillation and measurement. The measured data is analyzed considering position, state, and elastic waves, detecting various acoustic performances.

• Other analytical equipment

The Ultrasonic System Research Institute has developed manufacturing technology for ultrasonic probes that can control ultrasonic propagation states from 500 Hz to 100 MHz. Ultrasonic Probe: Overview Specifications Measurement Range: 0.01 Hz to 100 MHz Oscillation Range: 1 kHz to 25 MHz Propagation Range: 1 kHz to over 900 MHz Materials: Stainless steel, LCP resin, silicone, Teflon, glass... Oscillation Equipment Example: Function Generator By understanding the acoustic properties of metals, resins, glass, etc., we achieve propagation states tailored to specific purposes regarding sound pressure level, frequency, and dynamic characteristics through oscillation control. Online support is also available upon request. Ultrasonic Propagation Characteristics 1) Detection of vibration modes (changes in autocorrelation) 2) Detection of nonlinear phenomena (changes in bispectrum) 3) Detection of response characteristics (analysis of impulse response) 4) Detection of interactions (analysis of power contribution rates) Note: "R" is a free statistical processing language and environment autcor: Analysis of autocorrelation bispec: Analysis of bispectrum mulmar: Analysis of impulse response mulnos: Analysis of power contribution rates

• others
• Non-destructive testing
• Other analytical equipment

The Ultrasonic System Research Institute provides the following services through its original products: ultrasonic systems (sound pressure measurement analysis, oscillation control). 1) Manufacturing and sales of ultrasonic systems (sound pressure measurement analysis, oscillation control) 2) Consulting services related to ultrasonic utilization technology << Manufacturing and Sales >> 1) Original product: Ultrasonic system (sound pressure measurement analysis, oscillation control) System overview (standard system): - Ultrasonic tester NA 10MHz type - Oscillation system 20MHz type Price: 281,050 yen (including tax: 10% consumption tax) 2) Degassing fine bubble generation liquid circulation device Device overview: - Magnetic pump (Iwaki Magnetic Pump MD series MD-70RZ) - Timer - Hose and others Price: 99,000 yen (including tax: 10% consumption tax) 3) Other (onsite support: delivery, installation, operation explanation, etc.) Consulting fees (Estimates will be proposed based on the conditions for onsite visits...)

• Other measuring instruments

The Ultrasonic System Research Institute has developed ultrasonic cleaning technology that enables control of acoustic flow (ultrasonic propagation state) from 1 to 100 MHz by utilizing a megahertz ultrasonic oscillation control probe in relation to ultrasonic cleaners. This is a new application technology for precision cleaning, processing, and stirring based on the measurement, analysis, evaluation, and technology of ultrasonic propagation states. By utilizing the acoustic properties (surface elastic waves) of various materials, ultrasonic stimulation to the target object can be controlled even in a 1000-liter tank with ultrasonic output below 20W. It was developed as an application method for nonlinear phenomena through an engineering (experimental and technical) perspective on elastic wave phenomena and an abstract algebraic model of ultrasound. The key point is the use of tools (elastic bodies: metal, glass, resin). By confirming the propagation characteristics of ultrasound depending on the conditions of the target object, it is important to address it as an original nonlinear resonance phenomenon (Note 1). Note 1: Original Nonlinear Resonance Phenomenon This phenomenon occurs due to the generation of harmonics resulting from original oscillation control, which is realized at high amplitudes through resonance phenomena, leading to ultrasonic vibration resonance.

• Other measuring instruments
• Water Treatment
• others

The Ultrasonic System Research Institute has developed a technology to control nonlinear ultrasonic phenomena by utilizing the interactions generated from simultaneously oscillating two types of ultrasonic probes from one oscillation channel of a function generator. Note: Nonlinear (resonance) phenomena refer to the resonance phenomenon that occurs when the generation of harmonics produced by original oscillation control is realized at high amplitudes, resulting in ultrasonic vibration resonance. By optimizing the ultrasonic propagation characteristics of various materials according to their intended purpose, efficient ultrasonic oscillation control becomes possible. Through the measurement and analysis of sound pressure data from ultrasonic testers, this system technology allows for the dynamic changes of surface elastic waves to be controlled according to their intended use. In practical terms, multiple (two types of) ultrasonic probes generate multiple (two types of) oscillations (sweep oscillation, pulse oscillation), which create complex vibration phenomena (original nonlinear resonance phenomena), achieving high sound pressure at high frequency propagation states, or achieving low frequency propagation states with high sound pressure levels tailored to the desired natural frequency.

• Scientific Calculation and Simulation Software
• Non-destructive testing
• others

The Ultrasonic System Research Institute conducts improvements to ultrasonic cleaning machines (consulting available) using original products: ultrasonic systems (sound pressure measurement analysis, oscillation control). For the current ultrasonic cleaning machines, we propose and implement improvement methods based on sound pressure measurement and analysis. Specifically, we will discuss the level of improvement through measurement and verification of ultrasonic cleaning machines using our original product: Ultrasonic Tester NA (recommended type), which allows for easy measurement and analysis of ultrasonic waves. Depending on the level of improvement, we will suggest the use of our original product: Ultrasonic Oscillation System (1 MHz, 20 MHz), which allows for easy control of ultrasonic oscillation. Based on the conditions of the water tank, cleaning solution, items to be cleaned, and cleaning level, we will propose a degassing fine bubble generation liquid circulation device. Ultrasonic propagation characteristics: 1) Detection of vibration modes (changes in self-correlation) 2) Detection of nonlinear phenomena (changes in bispectrum) 3) Detection of response characteristics (analysis of impulse response) 4) Detection of interactions (analysis of power contribution rates)

• others
• Non-destructive testing
• Scientific Calculation and Simulation Software

The Ultrasonic System Research Institute has developed (and published) methods to apply technologies using ultrasound and microbubbles for: 1) Relaxing residual stress near surfaces 2) Removing microscopic burrs in ultrasonic beauty devices. Through the technology that relaxes residual stress using ultrasound and microbubbles, we have experienced improvements in fatigue strength against metal fatigue, which leads to the uniformity of the surface of ultrasonic beauty devices and the efficiency of ultrasonic oscillation and propagation. This significantly changes the usage conditions of ultrasound (the dynamic characteristics of propagation frequency). In particular, the sound pressure level and propagation frequency of ultrasound vary greatly depending on the edge treatment of metal components that come into contact with the skin. By performing uniformity treatment, stable reproducibility and extended lifespan can be achieved. (This has been developed from achievements in ultrasonic cleaning.) We offer this technology as a consulting service.

• Water Treatment
• Vibration and Sound Level Meter
• others

The Ultrasonic System Research Institute offers custom-made ultrasonic probes that can control ultrasonic propagation states from 500 Hz to 900 MHz. We manufacture and develop original ultrasonic oscillation control probes tailored to specific purposes. The key point is the operational confirmation of the original probes. The responsiveness to dynamic changes in ultrasonic transmission and reception is the most important factor. This characteristic determines the range of applications for harmonics. Currently, we can accommodate the following ranges: Ultrasonic Probe: Outline Specifications Measurement Range: 0.01 Hz to 100 MHz Oscillation Range: 1 kHz to 25 MHz Propagation Range: 1 kHz to over 900 MHz Materials: Stainless steel, LCP resin, silicone, Teflon, glass, etc. Oscillation Equipment: Example - Function Generator By understanding the acoustic properties of metals, resins, glass, etc., we achieve propagation states tailored to specific purposes regarding sound pressure levels, frequencies, and dynamic characteristics through oscillation control. This is a new foundational technology for precision cleaning, processing, stirring, inspection, etc., based on measurement, analysis, and evaluation techniques for ultrasonic propagation states.

• Other measuring instruments
• Non-destructive testing
• others