Ultrasound system using a function generator (one set)

The Ultrasonic System Research Institute offers custom-made ultrasonic probes that can control ultrasonic propagation states above 900 MHz. We manufacture and develop original ultrasonic oscillation control probes tailored to your needs. The key point is the operational verification of the original probes. The responsiveness to dynamic changes in ultrasonic transmission and reception is the most important factor. This characteristic determines the range of applications for harmonics. Currently, we are capable of addressing the following ranges: Ultrasonic Probe: Outline Specifications - Measurement Range: 0.01 Hz to 100 MHz - Oscillation Range: 0.5 kHz to 25 MHz - Propagation Range: 0.5 kHz to over 900 MHz (analytical confirmation) Materials: Stainless steel, LCP resin, silicone, Teflon, glass, etc. Oscillation Equipment: Example - Function Generator By understanding the acoustic properties of metals, resins, glass, etc., we achieve propagation states tailored to your objectives regarding sound pressure levels, frequencies, and dynamic characteristics through oscillation control. This is a fundamental technology based on measurement, analysis, and evaluation techniques for ultrasonic propagation states.

The Ultrasonic System Research Institute provides consulting services for the manufacturing and development methods of ultrasonic cleaning machines using a "degasification fine bubble (microbubble) generation liquid circulation device" that can efficiently control ultrasonic waves. "Degasification Fine Bubble (Microbubble) Generation Liquid Circulation Device" 1) By narrowing the intake side of the pump, cavitation is generated. 2) Cavitation causes bubbles of dissolved gas to form. The above describes the state of the degasification liquid circulation device. 3) When the concentration of dissolved gas decreases, the size of the bubbles formed by cavitation becomes smaller. 4) Through appropriate liquid circulation, fine bubbles (microbubbles) smaller than 20μ are generated. The above describes the state of the degasification fine bubble (microbubble) generation liquid circulation device. 5) When ultrasonic waves are applied to the above degasification fine bubble (microbubble) generation liquid circulation device, the ultrasonic waves disperse and crush the fine bubbles. When measuring the fine bubbles, the distribution of ultrafine bubbles becomes greater than that of fine bubbles. The above state indicates that ultrasonic waves can be stably controlled.

The Ultrasonic System Research Institute has developed an ultrasonic oscillation control probe using components with iron plating on polyimide film. We provide consulting services applying this technology for "ultrasonic and vibration measurement, propagation control..." on various curved surfaces. Ultrasonic Probe: Overview Specifications Measurement Range: 0.01 Hz to 100 MHz Oscillation Range: 1 kHz to 25 MHz Propagation Range: 1 kHz to over 900 MHz Materials: Stainless steel, LCP resin, silicon, Teflon, glass... Oscillation Equipment Example: Function Generator By understanding the acoustic characteristics of the target object and installation conditions, we have achieved dynamic control of surface elastic waves (propagation state). We realize propagation states tailored to various purposes (cleaning, stirring, etc.). Ultrasonic Propagation Characteristics 1) Detection of vibration modes (changes in autocorrelation) 2) Detection of nonlinear phenomena (changes in bispectrum) 3) Detection of response characteristics (analysis of impulse response) 4) Detection of interactions (analysis of power contribution rates) Iron Plating Treatment: Nippon Barrel Industry Co., Ltd. Address: 1-2-7 Shinonome, Minami-ku, Hiroshima City, 734-0022 Japan

The Ultrasonic System Research Institute has developed a technology for utilizing ultrasonic probes that can control the linearity and non-linearity of surface elastic waves of objects in the frequency range from 500 Hz to 900 MHz. The key point is the optimization of the propagation characteristics of surface elastic waves on the surface of ultrasonic elements according to their intended use. To achieve this, we confirm the operational characteristics of the original probe's ultrasonic propagation (sound pressure level, frequency range, non-linearity, dynamic characteristics, etc.). For the transmission and reception of ultrasound using multiple ultrasonic elements, it is important to measure, analyze, and evaluate the dynamically changing response characteristics. From the response characteristics, we determine the usable ranges of sound pressure level, frequency, and non-linearity. Currently, we are capable of addressing the following ranges. Ultrasonic Probe: Outline Specifications - Measurement Range: 0.01 Hz to 200 MHz - Oscillation Range: 1.0 kHz to 25 MHz - Propagation Range: 0.5 kHz to over 900 MHz (confirmation of sound pressure data analysis) - Materials: Stainless steel, LCP resin, silicon, Teflon, glass, etc. - Oscillation Equipment: Example - Function Generator - Measurement Equipment: Example - Oscilloscope