Construction method Product List and Ranking from 1590 Manufacturers, Suppliers and Companies | IPROS

Last Updated： Aggregation Period:Jan 28, 2026～Feb 24, 2026
This ranking is based on the number of page views on our site.

Construction method Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Jan 28, 2026～Feb 24, 2026
This ranking is based on the number of page views on our site.

  1. Taiyo Kisokogyo Co.,Ltd. Aichi//General contractors and subcontractors
  2. エルニード協会 Kagawa//Other construction industries
  3. 丸八土建 Mie//General contractors and subcontractors
  4. 4 HOKOKU ENGINEERING CO.,LTD. Osaka//Other construction industries
  5. 5 シーカ・ジャパン Tokyo//Building materials, supplies and fixtures manufacturers
Go to Company Ranking

Construction method Product ranking

Last Updated： Aggregation Period:Jan 28, 2026～Feb 24, 2026
This ranking is based on the number of page views on our site.

  1. Soil Coating Method "PoliSoil Greening" <NETIS Registered> 丸八土建
  2. 地下水・軟弱地盤対応の基礎工法『スーパーラップルエルニード工法』 エルニード協会
  3. Foundation Omega Method HOKOKU ENGINEERING CO.,LTD.
  4. 4 Install the valve without stopping the water! 'EM Continuous Water Valve Method' 水研
  5. 5 Hybrid Concrete Reinforcement Method "Solid Remain Alpha"

Construction method Product List

3091～3120 item / All 4274 items

Displayed results
Installation Pipe Repair Method "P-Installation Lining Method"

Installation Pipe Repair Method "P-Installation Lining Method"

A method for repairing mounting pipes made of polyethylene resin materials.

The "P-Mounting Lining Method" is a technique for repairing mounting pipes using polyethylene resin materials that excel in chemical resistance, abrasion resistance, and elongation. Rehabilitation materials (CPI pipes) are inserted from the mass side and integrated with the main pipe (polyethylene pipe) using welding machinery. Additionally, a gap may occur between the mounting pipe and the CPI pipe; however, since the CPI pipe has a load-bearing strength equal to or greater than that of PVC pipes (nominal diameter φ100), it is considered standard practice not to require backfilling. 【Features】 ■ Uses polyethylene resin materials ■ Repairs mounting pipes ■ No backfilling required ■ Obtained construction technology review certification in March 2015 *For more details, please refer to the PDF materials or feel free to contact us.

  • Special Construction Method
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Sewer Pipe Rehabilitation Method: "Polyethylene Compact Pipe Method"

Sewer Pipe Rehabilitation Method: "Polyethylene Compact Pipe Method"

Rehabilitation methods that address ground deformation caused by earthquakes and bending due to ground subsidence.

The "Polyethylene Compact Pipe Method" involves pulling a C-shaped high-density polyethylene pipe, wound on a drum, into an existing pipe through a manhole. It is restored to a circular shape using steam heating and compressed air, tightly adhering to the existing pipe, and is a method for rehabilitating aging existing pipes. The method is primarily designed for construction with diameters ranging from φ200 to φ350mm. It possesses self-supporting pipe strength and has a high elongation rate of over 350% at the time of fracture, making it capable of accommodating ground deformation and bending caused by earthquakes and ground subsidence. Since the rehabilitation material itself is resistant to breaking and cracking, it is suitable for seismic retrofitting. 【Features of Polyethylene Compact Pipe】 ■ Uses polyethylene that is very stable in quality and environmentally friendly ■ Rehabilitation material that can be used not only for sewer systems but also for water supply systems ■ Easy quality control of materials allows for speedy construction ■ Capable of accommodating ground deformation and bending caused by earthquakes and ground subsidence ■ Has the ability to conform to existing pipes *For more details, please refer to the PDF document or feel free to contact us.

  • Special Construction Method
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Concrete Polishing Finish Method "Placon Floor"

Concrete Polishing Finish Method "Placon Floor"

A new idea from "painting and sticking" to "polishing"!

"Placon Floor" is a revolutionary flooring finishing method that directly polishes the concrete substrate. This method polishes the concrete floor to a mirror-like finish, enhancing both the gloss that reflects light and the durability of the floor. Since this method utilizes the existing concrete as is, there is no need for finishing materials. It can be completed in a shorter time frame compared to painted floors, natural stone, or tiles. Additionally, there is no curing period required like with painted floors, allowing for immediate business operations after construction (after polishing). 【Features】 ■ Revolutionary ■ Improved floor durability ■ Significantly reduced construction time ■ Beautiful mirror finish ■ Substantial reduction in total costs *For more details, please refer to the catalog or feel free to contact us.

  • Renovation and repair methods
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Diamond Method Dry Flat Sawing

Diamond Method Dry Flat Sawing

A dry construction method that suppresses dust without using water during cutting! No need for wastewater treatment, significantly reducing the amount of industrial waste!

The method is a technique that adds a dust collection function to a flat sawing machine. Since it does not use cooling water, there is no need for water supply equipment or wastewater treatment. The cutting dust is simultaneously suctioned during cutting, making the processing simple. Additionally, since washing the road surface after cutting is unnecessary, there is no concern about road surface freezing during winter construction. 【Features】 ■ Effective for cost reduction ■ Easy post-processing ■ Can operate with the machine alone ■ Easy cleaning ■ No need for washing the road surface *For more details, please refer to the PDF materials or feel free to contact us.

  • Special Construction Method
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Diamond method wire sawing

Diamond method wire sawing

Thick and complex structures can be cut freely in vertical, horizontal, and diagonal directions! Work can be done flexibly in various locations!

"Wire sawing" is a cutting method that involves wrapping a wire with sintered diamond chips around the target object and rotating it at high speed while applying tension. It can be operated remotely and can be used flexibly in various environments such as underwater, at heights, and underground. Additionally, it is capable of cutting special composite materials such as metals and refractory materials. 【Features】 - Capable of cutting large and thick objects without being affected by depth - Generates less noise during building demolition, contributing to noise reduction for nearby areas - Can cut various objects including concrete and rebar - An environmentally friendly method with no pollution - Capable of cutting special composite materials (such as metals and refractory materials) *For more details, please refer to the PDF document or feel free to contact us.

  • Special Construction Method
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Dry Diamond Method

Dry Diamond Method

Eliminate wastewater sludge without cooling water! It is possible to prevent accidents caused by wastewater freezing in cold weather operations!

Compared to heavy machinery dismantling, the "diamond method" allows for cutting and drilling with low vibration and low noise, making it widely used in civil engineering and construction projects. However, a new problem has arisen: wastewater sludge from the cooling water used during operations contaminates the surrounding environment. The "dry diamond method" is a new technique that eliminates wastewater sludge while taking advantage of the benefits of the diamond method. In demolition and renovation work, where reducing environmental impact is essential, this method will serve as a guideline for the future. 【Features】 ■ ECO method that eliminates wastewater sludge ■ Low noise and low vibration method ■ Prevents accidents caused by wastewater freezing in cold weather operations ■ No need for post-processing; can be treated directly as industrial waste *For more details, please refer to the PDF materials or feel free to contact us.

  • Special Construction Method
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Non-flame metal cutting 'Diamond Method'. An alternative to gas cutting.

Non-flame metal cutting 'Diamond Method'. An alternative to gas cutting.

It is possible to safely cut and dismantle even in environments where gas cannot be used. It can quickly cut large plant equipment, slag from steel mills, and walls made of composite materials containing lead.

Our "Diamond Method" metal cutting technology can cut and drill various materials, from metals to ultra-high reinforced concrete. Large equipment can be cut and dismantled in a short time, and it is easy to extract solidified iron debris. For example, it is widely used in: - Modifications and construction of machinery related to plants - Petrochemical plants - Steel mills and power plants, etc. Dry cutting using air cooling is possible without using cooling water. During cutting, it can be performed without generating open flames, and remote operation is possible, making it a preferred choice for many companies as an alternative to gas cutting. 【Features】 ■ Capable of cutting complex shapes ■ Can cut both metals and ultra-high reinforced concrete ■ Dry cutting using air cooling without the use of cooling water ■ Can be performed without generating open flames during cutting ■ Remote operation is possible, allowing for flexibility in work locations *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Water jet method chipping device 'JMK-XYZ3000'

Water jet method chipping device 'JMK-XYZ3000'

Efficiently remove resin mortar without damaging the rebar of the expansion device! X-Y movable concrete removal device.

The "JMK-XYZ3000" is a specialized device for removing expansion joints on elevated roads, including highways. It is sized to match the expansion joint section, with a width of 2,100mm and a length of 4,150mm, allowing for efficient work. As it uses a water jet from a high-pressure pump, it can perform ideal removal work without damaging the rebar. 【Features】 ■ A self-propelled device that allows for efficient installation and work, reducing time ■ Flexible adaptation to expansion joint sections positioned at an angle through angle adjustment of the device ■ Exposes a sound substrate without damaging the rebar ■ Width and length adjustments can be made according to the construction site *For more details, please refer to the PDF document or feel free to contact us.

  • Special Construction Method
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Water jet method WJ drilling device

Water jet method WJ drilling device

Consideration for structures! It is possible to perform drilling suitable for repair and reinforcement of concrete structures without damaging the rebar!

Water jet cutting can drill into concrete without damaging rebar, allowing for durable repair and reinforcement work that takes structural considerations into account. The hole walls are not smooth like those created by core drilling, but rather have a rough surface, which allows filling materials such as mortar to interlock, ensuring high shear and adhesion performance. Drilling diameters from φ20 to 300mm are possible, and depths of over 5000mm can also be accommodated (based on actual performance data). 【Features】 ■ Can drill into concrete without damaging rebar ■ Takes structural considerations into account ■ Enables durable repair and reinforcement work ■ Hole walls can ensure high shear and adhesion performance ■ Drilling diameters from φ20 to 300mm are possible, with depths of over 5000mm (based on actual performance data) *For more details, please refer to the PDF document or feel free to contact us.

  • Special Construction Method
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Water jet method chipping device 'JMK-XYZ2100'

Water jet method chipping device 'JMK-XYZ2100'

Efficiently remove concrete even in narrow areas with a minimum width of 80mm! The dual-axis movable range can be operated remotely!

Introducing the 'JMK-XYZ2100' used in water jet cutting methods. This is a specialized device for removing concrete in narrow areas such as around bridge supports and in play areas. It can remove concrete even in spaces as narrow as 80mm. The two-axis movable range can be operated remotely, allowing for efficient work in a wide area within narrow spaces. 【Features】 ■ Removes concrete in narrow areas such as around bridge supports and in play areas ■ Capable of removing concrete in spaces as narrow as 80mm ■ Two-axis movable range can be operated remotely ■ Allows for efficient work in a wide area within narrow spaces *For more details, please refer to the PDF document or feel free to contact us.

  • Special Construction Method
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Water Jet Method Substrate Treatment System "Aqua Hand Blast"

Water Jet Method Substrate Treatment System "Aqua Hand Blast"

Simultaneous collection of waste materials and wastewater! A system with a cleaning width of 140mm that can efficiently perform substrate treatment over a wide area!

Introducing the "Aqua Hand Blast" used in water jet construction methods. A substrate treatment system with a cleaning width of 140mm that efficiently performs surface preparation over a wide area. It allows for simultaneous collection of waste materials and wastewater, enabling wider construction than a hand lance. 【Features】 ■ Substrate treatment system with a cleaning width of 140mm ■ Simultaneous collection of waste materials and wastewater ■ Enables wider construction than a hand lance *For more details, please refer to the PDF document or feel free to contact us.

  • Special Construction Method
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Remote coating removal water jet method "DynaBot"

Remote coating removal water jet method "DynaBot"

Achieving high efficiency in paint film stripping work through remote robot construction! Lightweight for easy maintenance! Suitable for removing interior and exterior coatings of various vessels and industrial tanks.

MMJ is a water jet robot that adheres to magnetic surfaces with magnets and can perform remote coating removal. It demonstrates its power in the stripping work of exterior painting of large ships, industrial tank painting, and painting of steel structures. A wireless operator can control the pump's ON/OFF and the winch's drop prevention brake alone, making it suitable for use in explosion-proof required environments. Its simple and lightweight structure also allows for easy maintenance. 【Features】 - Self-spin design with wireless control type, achieving high-efficiency work - Hydraulic drive type capable of vertical movement on walls, overhangs, and horizontal travel - Capable of turning direction at fixed points, allowing for efficient movement - The brake engages when the pump stops, automatically halting the winch's movement *For more details, please refer to the PDF document or feel free to contact us.

  • Special Construction Method
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Construction Information] Cutting the floor without using water - Dry Flat Sawing Method

[Construction Information] Cutting the floor without using water - Dry Flat Sawing Method

Dust generated during cutting is also vacuumed up. No need for sludge water treatment!

The method is a technique that adds a dust collection function to a flat sawing machine. Since it does not use cooling water, there is no need for water supply equipment or wastewater treatment. The cutting dust is simultaneously suctioned during cutting, making processing simple. Additionally, there is no need for washing the road surface after cutting, so there is no concern about road surface freezing during winter construction. 【Features】 ■ Effective for cost reduction ■ Easy post-processing ■ Can operate with the machine alone ■ Easy cleaning ■ No need for washing the road surface *For more details, please refer to the PDF materials or feel free to contact us.

  • Special Construction Method
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Construction Information] Are you troubled by tire marks? [For factories and warehouses]

[Construction Information] Are you troubled by tire marks? [For factories and warehouses]

We will remove tire marks and slip marks stuck to the floors of factories and warehouses!

"Floor Maintenance P" is a method focused solely on removing tire marks, slip marks, and surface dirt from the floor, achieving a short construction period and low cost! As an option, you can also choose to repair pinholes and minor cracks in the concrete surface, as well as correct unevenness. 【Features】 ■ Revolutionary ■ Significantly reduces construction time ■ Substantial cost reduction ■ Various optional construction choices available *For more details, please refer to the catalog or feel free to contact us.

  • Carports and related materials
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Construction Information] Substrate treatment methods such as floor leveling and coating removal.

[Construction Information] Substrate treatment methods such as floor leveling and coating removal.

Rotate the diamond disc! Perform removal of various coatings and surface treatment.

We would like to introduce our surface preparation method "Grinding." This method involves surface treatment using a horizontally rotating diamond disc, allowing us to select and utilize various machines and diamonds from a diverse lineup to remove different coatings and perform surface treatments. By combining this with cutting methods and peeling methods, it is possible to finish rough surfaces smoothly. 【Features】 ■ Dust is collected with a vacuum ■ Surface polishing and thin film removal are achieved by rotating the diamond disc ■ Removal of epoxy coatings is possible using special chip blades *For more details, please download the PDF or feel free to contact us.

  • Pavement construction
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Construction Information] Cutting method for floors, floor slabs, and pavements can cut up to a maximum of 800mm.

[Construction Information] Cutting method for floors, floor slabs, and pavements can cut up to a maximum of 800mm.

The diamond blade rotates at high speed, cutting vertically through roads and floors!

We would like to introduce our diamond cutting method, "Flat Sawing." This efficient method allows for quicker cutting of horizontal surfaces such as floors, slabs, and pavements. It ensures reliable cutting work in a wide range of scenarios, from the installation of telephone, electrical, gas, and water pipes to the renovation of water supply and drainage systems, road repairs, joint cutting, and slabs. 【Features】 ■ Capable of cutting depths up to 800mm ■ Can also perform snow-melting groove cutting with a cutting width of 50mm ■ Cutting can be done with both electric (suitable for indoor work as it produces no exhaust emissions) and engine-powered equipment ■ Wet or dry cutting can be selected based on the site conditions ■ Cutting of materials other than floors (such as concrete precast products) is also possible. *Please inquire for details. *For more information, please download the PDF or feel free to contact us.

  • Concrete construction
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Laser surface treatment method

Laser surface treatment method

Cutting-edge laser technology that innovates coating, rust removal, and surface preparation techniques.

The laser coating removal device "CoolLaser G19-6000" is a new substrate treatment technology that excels in environmental friendliness and operability for infrastructure structures, including bridges, ports, and energy-related facilities. It addresses the challenges associated with traditional blasting methods and power tools through the thermal effects of lasers. This non-contact, clean method removes materials solely through melting, vaporization, and thermal fragmentation, without the use of abrasive materials. ■NETIS Registration Number: CB-230005-A

  • Plastering and painting work
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Protective material "EZ (Easy) Protector"

Protective material "EZ (Easy) Protector"

The protective material for the corners of important products is decided with this!

The "EZ Protector" is a protective material for corners, covering four sides, and protecting the corners and edges of important products. It is made of 3-4mm thick cardboard, making it easy to handle. Additionally, a type that closes at both ends is also available, and custom dimensions can be discussed upon request. Please feel free to contact us. 【Features】 ■ Protects corners ■ Custom dimensions available ■ Type that closes at both ends also available *For more details, please refer to the catalog or feel free to contact us.

  • Safety and consumables
  • Other fixtures and fittings
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Protective material "EZ (Easy) Roll Stop"

Protective material "EZ (Easy) Roll Stop"

The definitive version for protecting people and securing luggage! This roll material's hadome is just right.

The "EZ (Easy) Colostop" is a protective material that can be used for securing loads during loading and unloading, securing loads during transportation, and securing carts within warehouses. It is water-resistant and can be installed simply by placing it under the wheels. We offer a lineup including "RS-200," "RS-400," and "RS-1000," so please choose according to your size requirements. 【Features】 ■ Safe and secure when placed ■ Simply place it under the wheels ■ Water-resistant *For more details, please refer to the catalog or feel free to contact us.

  • Safety and consumables
  • Other fixtures and fittings
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Protective material "EZ Angle" *Free samples available!

Protective material "EZ Angle" *Free samples available!

You can cut it freely at your favorite place! A packaging protective material that can be used only for the necessary length and area. For protecting the contact and corner areas of PP bands.

The "EZ Angle" is a simple protective material used during packaging, which can be cut freely, allowing you to use just the right amount in the necessary areas. It can be used to protect the contact points of PP bands and the corners. Additionally, we also offer products like the "EZ L Angle," which is widely used for protecting product corners and as support material. 【Features】 ■ Freely cuttable ■ Use just the right amount in the necessary areas *For more details, please refer to the catalog or feel free to contact us.

  • Safety and consumables
  • Other fixtures and fittings
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Large-diameter deep mixing treatment method "KS-S MIX Method"

Large-diameter deep mixing treatment method "KS-S MIX Method"

We will create a high-quality improved body with no variation!

The "KS-S・MIX Method" is one of the deep mixing treatment methods and is a large-diameter relative mixing method with a single shaft of large diameter (φ1600mm to φ2000mm). By achieving relative mixing between the outer and inner wings, it realizes three-dimensional mixing from planar mixing, enabling the creation of high-quality improved bodies with consistent quality due to excellent mixing performance. Additionally, it allows for drilling into hard ground, and the outer vertical wing rotates while contacting the drilling wall, and rotates relative to the inner wing, thereby reducing lateral impact. 【Features】 - Large diameter construction (single shaft of φ1600mm to φ2000mm) - Assurance of quality For more details, please refer to the PDF document or feel free to contact us.

  • Ground improvement
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Deep Layer Mixed Treatment Method "CI-CMC-HG Method"

Deep Layer Mixed Treatment Method "CI-CMC-HG Method"

Adoption of high-torque inverter motors! Capable of adapting to ultra-hard ground with an N value exceeding 50.

The "CI-CMC-HG method" is a deep mixing treatment method for large-diameter, low-displacement applications. To further enhance penetration capability, it employs a super-hard auger equipped with a high-torque inverter motor that has approximately twice the torque of the CI-CMC method auger. This allows for application to super-hard ground such as gravelly soils with an N value exceeding 50. Additionally, it is possible to use a tip discharge mechanism that injects air and slurry from the tip of the mixing shaft as a penetration aid, making it adaptable to a wide range of hard ground. 【Features】 ■ Improved penetration capability due to the hard auger ■ Enhanced penetration capability through the tip discharge mechanism ■ Realization of optimal construction cycles ■ Reduction of mechanical load on underground obstacles ■ NETIS registration number QS-200009-A *For more details, please refer to the PDF materials or feel free to contact us.

  • Ground foundation construction method
  • Renovation and repair methods
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Land-based edition: Rebound-type sand compaction pile method "Composer"

Land-based edition: Rebound-type sand compaction pile method "Composer"

A representative method that has created the history of ground improvement! Its application range is wide and utilized for various purposes.

We would like to introduce the land-based version of our rebound-type sand compaction pile method, "Composer." Using a vibrating hollow pipe, the "rebound construction" method repeatedly penetrates, extracts, and re-injects to create large, well-compacted sand piles in soft ground, thereby stabilizing the ground. This method was developed and put into practical use by our company, and it has been adopted in various parts of the world, with a construction record of 380,000 km of piles. 【Features】 ■ Wide range of applicable ground and improvement purposes ■ Highly reliable construction management and quality control ■ Ensured creation of composer piles ■ Excellent versatility ■ Effective utilization of construction by-products *For more details, please refer to the PDF materials or feel free to contact us.

  • Ground foundation construction method
  • Renovation and repair methods
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Marine Edition: Rebound Type Sand Compaction Pile Method "Composer"

Marine Edition: Rebound Type Sand Compaction Pile Method "Composer"

Utilizing a wide range of applicable ground and improvement purposes to form the foundations of various offshore structures!

We would like to introduce the offshore version of our backfilling sand compaction pile method, "Composer." By utilizing a positioning system that employs VRS-GPS (network-type RTK-GPS positioning), we can measure the position of the work vessel in real-time using GPS, allowing for precise movement and stabilization of the work vessel at the designated placement location. This method involves driving a vibrating casing pipe to a specified depth, then extracting and backfilling it repeatedly to create well-compacted sand piles with a large diameter within soft ground, thereby stabilizing the ground. 【Features】 ■ Wide range of applicable ground and improvement purposes ■ Economical construction method ■ Capable of construction at great water depths and depths ■ Reliable creation of composer piles ■ High reliability in construction management and quality control ■ Utilization of work vessel position and navigation information systems *For more details, please refer to the PDF materials or feel free to contact us.

  • Ground foundation construction method
  • Renovation and repair methods
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-streamline solidification material slurry injection stirring method 'FTJ method'

2-streamline solidification material slurry injection stirring method 'FTJ method'

High-pressure injection enables the rapid construction of large-section improvements! Achieving significant cost reduction and shortened construction time.

The "FTJ Method" is a two-stream solidification material slurry injection and mixing method that enables the creation of large cross-sections at once by injecting high-pressure, high-flow solidification material slurry from multiple nozzles located at the tips of mixing blades. It allows for construction at more than double the speed, achieving cost reduction and shortening of construction periods. Additionally, we also offer the "FTJ-FAN Method," a swinging multi-stream solidification material slurry injection and mixing method that controls the injection direction to create improved shapes with fan or rectangular cross-sections. 【Features】 ■ Large diameter and high-speed construction ■ Reliable construction management ■ Wide range of applicable ground conditions ■ Highly mobile, self-propelled small construction machinery ■ Reduced impact of displacement *For more details, please refer to the PDF materials or feel free to contact us.

  • Ground foundation construction method
  • Renovation and repair methods
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ground improvement for immobile tetra.

Ground improvement for immobile tetra.

Skillfully working with soil and ground. Providing safe ground suitable for various structures.

At Fudo Tetra, we offer "ground improvement" services. Since successfully developing the sand compaction pile method, which has now become a representative ground improvement technique, we have continued to conduct further research and development. As experts in ground engineering, we possess a wealth of design and construction techniques and a proven track record, earning high evaluations and trust. Through the technology we have cultivated over many years, we aim to deepen our understanding of the earth, provide safe ground for all structures, and create new spaces that respect the earth. 【Features】 ■ Skillfully working with soil and ground ■ Creating reliable, safe, economical, and environmentally considerate ground ■ Providing technology that meets various construction needs ■ Effectively utilizing construction materials and industrial by-products ■ Facilitating a wide variety of construction machinery to ensure safe and reliable execution *For more details, please refer to the PDF materials or feel free to contact us.

  • Ground improvement
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Finishing Method "JPS Method"

Finishing Method "JPS Method"

The finish color is four colors! It is possible to construct floor slabs with excellent abrasion resistance, surface strength, and water tightness.

The "JPS Method" is a construction method suitable for finishing concrete floors in factories, warehouses, and logistics centers. By using this method, the finishing accuracy is significantly improved compared to conventional methods. Furthermore, it allows for a smooth surface finish with minimal unevenness, resulting in floors that excel in wear resistance, surface strength, water tightness, and crack resistance. Additionally, it enables a color finish that is less prone to surface peeling over the long term, allowing for stable adhesion of finishing materials such as floor coatings. 【Features】 ■ Smooth surface finish is possible ■ Excellent wear resistance and surface strength ■ Four color options for finishing ■ Capable of large area finishing construction ■ Construction of water-tight floor slabs is possible *For more details, please refer to the PDF materials or feel free to contact us.

  • Special Construction Method
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Construction method "Daisat Method"

Construction method "Daisat Method"

We provide comprehensive support from water treatment to soil improvement and heavy metal immobilization.

This method is an environmentally friendly water treatment and soil improvement technology that uses natural-derived components as its main raw materials. It performs solidification treatment from naturally occurring heavy metals to human-induced heavy metal contamination, and the contaminated water generates sludge to remove heavy metals. If you are facing issues with water treatment or soil improvement, please feel free to consult us. 【Features】 ■ Environmentally friendly water treatment ■ Soil improvement is possible *For more details, please contact us or download the catalog.

  • Renovation and repair methods
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Stand Drive Method

Stand Drive Method

New proposal for "rock bolt work and rebar insertion work"! Construction is possible if the distance between the slope and interfering objects such as houses is 2.0 to 3.0 meters.

This technology is a method that allows for the installation of rock bolts without scaffolding. Due to the characteristic of erecting the drilling machine with wires, the drilling machine itself is lightweight, eliminating the need for cranes or scaffolding for relocation or installation. As a result, it is possible to perform inter-tree drilling in the forest without cutting down surrounding trees. Additionally, since drilling can be done without deforestation, it is highly compatible with environmentally friendly slope construction. 【Features】 ■ No scaffolding required at all ■ No need for tree cutting even in inter-tree construction ■ Reduces traffic restrictions in urban construction ■ Environmentally conscious with dust control measures ■ Numerous construction achievements *For more details, please refer to the PDF materials or feel free to contact us.

  • Civil Engineering Method
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Unit net construction method

Unit net construction method

Reinforcement materials and unit nets are connected by pressure plates! This is a ground reinforcement construction method aimed at stabilizing slopes through interaction.

This technology is an ecological method that balances forest conservation and slope reinforcement effects. The unit net forms a mesh-type open slope structure, making it possible to protect existing trees and preserve the landscape. Additionally, it can be combined with greening methods for full greening. It demonstrates excellent performance in preventing disasters while protecting the natural environment. 【Features】 ■ Protection of forests, preservation of landscapes, and greening of slopes are possible ■ High applicability to natural slopes ■ Can reduce costs and shorten construction periods ■ Uses zinc-aluminum alloy coating for surface treatment of the unit net to improve durability *For more details, please refer to the PDF materials or feel free to contact us.

  • Civil Engineering Method
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Construction method

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.