List of Construction methods and technologies products
- classification：Construction methods and technologies
3151～3195 item / All 6471 items
100% recycled gypsum derived from waste gypsum boards is reused as raw material, achieving effective carbon neutrality during manufacturing!
![FireShot Capture 667 - RE_ トップコラム前回ご掲載原稿のご送付【イプロス インサイドセールスグループ】 - inside-sales1@ipros.jp _ - [mail.google.com].png](https://image.www.ipros.com/public/product/image_sub/cb9/2001251576/IPROS808870027571457195.png?w=280&h=280){kind=small}
- Gypsum board and moldings
Developing equipment and technology for air conditioning, water supply and drainage, and kitchen drainage!
- Air conditioning equipment
- Water Treatment Plant
- Water supply facilities
Cutting of Storage Steel Sheet Pile Type III! Construction Case in Areas Where Road Regulations are Difficult.
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
It's not surprising if anything comes out; the entire site is an example of land reclamation excavation.
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
We exhibited at the Sewer Exhibition '18 in Kitakyushu!
Yasuda Engineering showcased the underground obstacle-responsive mud-based thrusting method, featuring the milling mole method and the jet method, which uses a CCD camera sensor to instantly measure the position of the tunneling machine on sharp curves! 【Exhibited Products】 ■ Underground Obstacle-Responsive Mud-Based Thrusting Method The milling mole method is used in urban development and is a mud-based thrusting method that safely conducts construction by cutting through obstacles that remain underground. It can detect obstacles ahead of the thrusting excavation and discharge them as cutting powder of about 1 cm, and if necessary, it allows for the injection of chemical solutions from within the machine and guidance of the tunneling machine using GPS. ■ Jet Method The jet method, which uses a CCD camera sensor to instantly measure the position of the tunneling machine on sharp curves, enables long-distance and sharp curve construction in small-diameter thrusting. By using a dedicated pump tube and lubricant injection pipe for the jet method, it reduces the load on the pipe, making long-distance thrusting possible even with small diameters. It is the most excellent all-around thrusting method that does not limit construction sites due to internal measurements of the pipe.
[NETIS Registered] No worries even if obstacles appear! A construction method that is starting to be chosen nationwide! Compatible with diameters from φ800 to 3000 mm.
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
The milling mall method is safe even when obstacles appear! A thrust method chosen nationwide, compatible with diameters from φ800 to 3000 mm. *Registered with NETIS.
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
It is possible to cut through obstacles and achieve long-distance propulsion! The milling mole method is reliable even when obstacles arise and is a preferred propulsion method nationwide!
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
[NETIS Registered] No worries even if obstacles appear! Compatible with φ800 to 3000 mm. *Exhibited at the 2018 Kitakyushu Sewerage Exhibition!
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
We will be exhibiting a panel at the Construction Technology Fair 2018 in Chubu from October 17 (Wednesday) to October 18 (Thursday).
Yasuda Engineering Co., Ltd. will be exhibiting a panel at the "Construction Technology Fair 2018 in Chubu," which will be held from October 17 (Wednesday) to October 18 (Thursday), 2018! This event provides a platform for technical exchange among industry, academia, and government, promoting technological development and the introduction of new technologies, while introducing the current status and direction of technology development to students majoring in the construction field. It is also an exhibition that widely presents the appeal of construction technology and the necessity of social infrastructure development to the general public. Our company will showcase the ultimate thrusting method, the "Milling Mole Method," equipped with four special functions (exploration, improvement, cutting, and guidance) that ensure safety even in the presence of obstacles. Please be sure to check out our panel display! We look forward to your visit.
We have showcased the "Underground Obstacle Response Type Mud Density Propulsion Method" that no longer fears obstacles!
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
[Performance Collection Available] No worries even if obstacles appear underground! We detect and cut obstacles located about 2 meters ahead of the tunneling machine!
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
We will introduce a case study of water supply construction that involves finely cutting and removing underground obstacles!
- Special Construction Method
- others
We have published a case study of electrical work conducted using the milling mall method!
- Special Construction Method
- others
It is possible to directly reach the existing shield through the application of metal cutting technology! We are currently presenting examples of construction where direct cutting was performed on exi...
- Special Construction Method
- Sewerage facilities
Notice of the 44th "Latest Construction Method and Technology Training Seminar"
Yasuda Engineering Co., Ltd. will conduct a seminar at the 44th "Latest Construction Techniques for Propulsion Methods" held in Tokyo and Osaka. We will report on our new initiatives utilizing the steel obstacle cutting function of the milling mole method. This seminar is certified as a "Continuing Education (CPD) Program" by the Japan Society of Civil Engineers. (CPD credits: 6.5) We sincerely look forward to your attendance. [Overview] ■ Seminar Time: 14:55 - 15:50 ■ Seminar Content: Challenging New Areas with the Milling Mole Method - New Initiatives Utilizing the Steel Obstacle Cutting Function - *For information on how to apply, please refer to [Details and Application].
I would like to report on a new initiative that utilizes the cutting function of steel obstacles.
- Special Construction Method
Notice of the 44th "Latest Construction Method and Technology Training Seminar"
Yasuda Engineering Co., Ltd. will conduct a seminar at the 44th "Latest Construction Techniques for Propulsion Methods" held in Tokyo and Osaka. We will report on our new initiatives utilizing the steel obstacle cutting function of the milling mole method. This seminar is certified as a "Continuing Education (CPD) Program" by the Japan Society of Civil Engineers. (CPD credits: 6.5) We sincerely look forward to your attendance. [Overview] ■ Seminar Time: 14:55 - 15:50 ■ Seminar Content: Challenging New Areas with the Milling Mole Method - New Initiatives Utilizing the Steel Obstacle Cutting Function - *For information on how to apply, please refer to [Details and Application].
We conducted a comprehensive evaluation and overall assessment of the methods for dealing with obstacles in the construction method, considering aspects such as estimated construction period, estimate...
- Special Construction Method
- Sewerage facilities
All-rounder in construction work! Examples of cutting through 1m thick reinforced concrete walls, etc.
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
It has been adopted for construction where there is a possibility of wooden stakes with a diameter of 300 mm existing in the pipeline section.
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
Cutting unexpected H-beams in six locations! A case study of construction work for thrusting on a heavily trafficked main road.
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
A propulsion method equipped with four special functions: exploration, improvement, cutting, and guidance! Presentation of construction achievement collection!
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
![[Construction Results Presentation]...](https://image.www.ipros.com/public/product/image/ebd/2000375459/IPROS1368216273853392078.jpg?w=280&h=280){kind=small}
Removal and discharge of a φ1800mm Hume pipe! A pushing method that ensures safety even in the presence of obstacles!
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
We held a panel exhibition at the Construction Technology Fair 2018 in Chubu from October 17 (Wednesday) to October 18 (Thursday), 2018!
Yasuda Engineering Co., Ltd. held a panel exhibition at the "Construction Technology Fair 2018 in Chubu," which took place from October 17 (Wednesday) to October 18 (Thursday), 2018! This exhibition provides a platform for technical exchange among industry, academia, and government, promotes technological development and the introduction of new technologies, introduces students majoring in construction to the current status and direction of technological development, and widely presents the appeal of construction technology and the necessity of social infrastructure development to the general public. Our company showcased the ultimate thrusting method, the "Milling Mole Method," equipped with four special functions (exploration, improvement, cutting, and guidance) that ensure safety even in the presence of obstacles.
[NETIS Registered] No worries even if obstacles arise! A construction method that is starting to be chosen nationwide! Compatible with diameters from φ800 to 3000 mm.
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
Many achievements in the domestic market. Leveraging domestic experience, expanding overseas! "Currently offering domestic construction achievements as a gift."
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
[Performance Collection Available] No worries even if obstacles appear underground! We detect and capture obstacles about 2 meters ahead of the tunneling machine and cut through them!
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
![[Video Available] Measures against ...](https://image.www.ipros.com/public/product/image/cc1/2000429532/IPROS18358409666108027113.png?w=280&h=280){kind=small}
No worries if obstacles appear underground! The tunneling machine detects and captures obstacles about 2 meters ahead, allowing for cutting of the obstacles! [Performance report available]
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
![[Video Available] Connect to existi...](https://image.www.ipros.com/public/product/image/222/2000429534/IPROS13724477372724745348.png?w=280&h=280){kind=small}
No need to worry about obstacles underground! The tunneling machine detects and captures obstacles about 2 meters ahead and cuts through them! [Collection of achievements available]
- Site and ground investigation
- Civil Engineering Method
- Special Construction Method
Cutting and removing underground obstacles in detail! We will introduce examples of sewer construction work.
- Special Construction Method
- others
We have published a case study of gas construction using the milling mall method implemented by our company!
- Special Construction Method
- others
Introducing a case study of shield arrival construction using the milling mall method!
- Special Construction Method
- others
Notice of the 44th "Latest Construction Method and Technology Training Seminar"
Yasuda Engineering Co., Ltd. will conduct a seminar at the 44th "Latest Construction Techniques for Propulsion Methods" held in Tokyo and Osaka. We will report on our new initiatives utilizing the steel obstacle cutting function of the milling mole method. This seminar is certified as a "Continuing Education (CPD) Program" by the Japan Society of Civil Engineers. (CPD credits: 6.5) We sincerely look forward to your attendance. [Overview] ■ Seminar Time: 14:55 - 15:50 ■ Seminar Content: Challenging New Areas with the Milling Mole Method - New Initiatives Utilizing the Steel Obstacle Cutting Function - *For information on how to apply, please refer to [Details and Application].
The advancement construction method often faces many challenges during the excavation process. Here are examples of how those problems were solved!
- Special Construction Method
- Sewerage facilities
Both skilled workers and beginners can achieve the same crimping quality. Anyone can easily set the load and assemble. It is a load management type battery tool.
- Renovation and repair methods
Introducing construction methods suitable for repairing existing cracks and methods compatible with long-term excellent housing standards!
- Renovation and repair methods
- Drainage and ventilation equipment
- Cement mortar coating
[Demo unit available for loan] Can be used cordlessly and is easy to operate. Ideal for prototyping and small-scale production.
- Special Construction Method
Clearly visualizes cracks with a transparent coating. High surface protection performance and excellent peeling prevention even without a reinforcing mesh.
- Special Construction Method
Contributes to the reduction of life cycle costs. Proposes repair methods tailored to deterioration factors. Preventive maintenance before deterioration is also possible.
- Renovation and repair methods
It is possible to reduce costs through shortened construction periods by minimizing process losses in coating amounts and application frequency!
- Renovation and repair methods
Five-layer structure for effective heat insulation and thermal insulation!
- Heat insulation and heat shielding methods
- Heat shielding sheet
- Soundproofing Sheet
30-minute fire-resistant roof structure certification (plate thickness 0.6 to 1.2 mm)! Introducing our roof insulation construction method.
- Renovation and repair methods
- Roof and gutter construction
We offer two height options for wall tight lists! Introducing our special wall material construction method.
- Other wall materials
- Special Construction Method
Introducing methods such as "indirect fixing method" and "direct fixing method" that do not require the removal of existing large wave slates!
- Roof and gutter construction
- Renovation and repair methods
The main standard components are hanging brackets and sheet nuts! Let us introduce our hanging folding plate method.
- Roof and gutter construction
- Special Construction Method
Using SK Roof 150 and SK Angle Haze V-III! Introducing our renovation method (folded plate).
- Renovation and repair methods
Proposal for "PVC Neutralization Tanks" characterized by long lifespan and short delivery times! It is also possible to deliver in two parts and assemble on-site.
- Renovation and repair methods
Dramatic improvement in the reliability of piles! A construction method developed with consideration for the surrounding environment, seeking low noise and low vibration.
- Ground foundation construction method
- Civil Engineering Method
- Foundation construction
Can be excavated reliably without affecting technology! Low vibration and low noise hydraulic hammer grab.
- Ground foundation construction method
- Civil Engineering Method
- Foundation construction
Shortening construction time and reducing costs! This is a method that allows for the removal of obstacles and the creation of piles in one process.
- Ground foundation construction method
- Civil Engineering Method
- Foundation construction
Active in the foundation removal of underground structures due to redevelopment construction and new foundation work!
- Ground foundation construction method
- Civil Engineering Method
- Foundation construction
Responding to the diversification of construction work! A series of operations from underground obstacle removal to pile construction can be performed with the same machine.
- Foundation construction
- Ground foundation construction method
- Pile and foundation work