We held a panel exhibition at the Construction Technology Fair 2018 in Chubu from October 17 (Wednesday) to October 18 (Thursday), 2018!

[NETIS Registered] No worries even if obstacles appear! Compatible with φ800 to 3000 mm. *Exhibited at the 2018 Kitakyushu Sewerage Exhibition!

The "Milling Mole Method," a ground obstacle response type mud-based thrusting method equipped with four special functions: exploration, improvement, cutting, and guidance, consists of three devices: a tunneling machine, a special telescopic pipe, and a special injection pipe, allowing for the precise cutting and removal of underground obstacles. Using electromagnetic waves, it explores metal obstacles ahead while thrusting and can also improve the ground from within the tunneling machine before and after the detected obstacles. In the event an obstacle is detected, the special telescopic device can be used to cut through the underground obstacle at ultra-low speed, allowing for continued thrusting. Additionally, a system is equipped to guide the tunneling machine to a designated position within the arrival shaft by installing a receiving coil at that location, making it the ultimate thrusting method capable of achieving high precision even when obstacles are encountered. 【Performance by Obstacle Type】 ■CASE-6 Steel Sheet Pile 3W Cutting ■CASE-7 Steel Sheet Pile 3 & H Steel Cutting ■CASE-8 Wooden Pile & Steel Sheet Pile Cutting ■CASE-9 H Steel & Existing Manhole Wall Cutting ■CASE-10 Underground Continuous Wall & Metal Object Cutting *For more details, please refer to the PDF document or feel free to contact us.

• Site and ground investigation
• Civil Engineering Method
• Special Construction Method

Removal and discharge of a φ1800mm Hume pipe! A pushing method that ensures safety even in the presence of obstacles!

The underground obstacle-responsive mud-based propulsion method "Milling Mall Method" consists of three devices: a tunneling machine, a special expandable pipe, and a special injection pipe, which crush and discharge metallic obstacles. In the sewer construction of Section 42 in Yao City, Osaka Prefecture, the cutting and removal of a concrete pipe was carried out. Immediately after starting, the existing propulsion concrete pipe with a diameter of 1800 mm was cut diagonally over a section of 8.21 meters, which was an obstacle, and then normal tunneling was performed to reach the existing special manhole. At the existing manhole, the head was completely destroyed, and the plan was to disassemble and recover everything else. *For more details, please refer to the PDF document or feel free to contact us.*

• Site and ground investigation
• Civil Engineering Method
• Special Construction Method

This is a company introduction catalog for Yasuda Engineering Co., Ltd., a comprehensive construction industry that includes general civil engineering and building construction.

Yasuda Engineering Co., Ltd. has been a specialized company in public sewer construction, contributing to the environmental development of the local community since its establishment in 1975. We have pursued sound management and advanced technical capabilities, continuing to make steady progress. In 2001, we acquired the international standard "ISO9001" and expanded into the field of general civil engineering. We aim to be a corporate group capable of continuous innovation in comprehensive construction, including building construction. At Yasuda Engineering Co., Ltd., all employees are united in honing our technical skills and creating a new future. 【Main Business Categories】 ○ Comprehensive construction ○ Pushing construction ○ Planning, design, surveying, construction, management, contracting, and consulting related to comprehensive construction ○ Buying, exchanging, leasing, brokering, and managing real estate ○ Manufacturing, selling, and renting construction machinery and equipment, among others *For more details, please refer to our catalog or feel free to contact us.

• Site and ground investigation

In the field of food and health food research and development, an increasing number of companies are facing the following challenges: - Difficulty in exploring new functional materials and differentiation themes, leading to a depletion of research topics. - While they are collecting information from conferences and papers, they struggle to translate this into research themes directly related to their products. - They remain limited to competing similar products and follow-up projects, failing to establish uniqueness. - Although there are seeds of ideas, they struggle to elevate them to scientific hypotheses and build the necessary foundations for internal approval. Behind this lies a "wall of execution" that cannot be overcome by traditional information gathering and research processes. In this webinar, we will introduce a new R&D approach to break through these challenges. It is a next-generation research and development scheme that combines AI-driven hypothesis generation, which has achieved results in drug discovery, with scientific hypothesis verification by a food human trial CRO. This will allow for the transformation of vague ideas into scientifically verifiable projects, simultaneously achieving the construction of persuasive foundations for upper management and differentiation development.

Fujikohsuhou Industrial Co., Ltd. will hold an online seminar titled "Tips for Setting Laser Hardening Conditions" on July 20, 2025 (Wednesday). In laser hardening, factors such as output and speed are related to the quality of hardening. We will explain how output and speed are connected to quality factors. This seminar is aimed at those who are looking to start utilizing laser hardening. 【Recommended for】 ■ Those who want to learn about methods for setting laser hardening conditions ■ Those who want to obtain technical information about laser hardening

Take the 'first step' in DX talent development in Fukuoka. We will hold a free seminar where you can learn reskilling strategies that can be applied in the field through case studies and experiences! 'I've become responsible for DX, but I don't know where to start.' This is a participatory seminar aimed at representatives from small and medium-sized enterprises in Fukuoka City, Fukuoka Prefecture, where you can learn the 'first steps' in DX talent development and implementation support. While introducing case studies of representative DX tools such as Power Automate and Power BI, you will experience hands-on sessions with Copilot, allowing you to grasp practical small-start methods that can be implemented on-site. The content also includes specific success stories from the Fukuoka region, along with tips for promoting understanding and advancement within your organization.

We will be exhibiting at INCHEM TOKYO 2025, which will be held at Tokyo Big Sight from September 17 (Wednesday) to September 19 (Friday). This time, we will host many events, including special project stages and mini-seminars. At our booth, we will introduce our solutions and technologies based on the theme of "Sustainable Plant Engineering" from three different concepts. Please be sure to stop by our booth, East Hall 6, K-17.

The Siemens EDA Tech Forum is a technical event aimed at sharing the latest technological trends, case studies, and solutions to challenges with everyone involved in the design and development of silicon systems and electronic systems, while addressing evolving technologies, the densification and complexity of designs, and various design challenges, all while meeting requirements for quality, safety, and reliability. The goal is to deepen insights and networks towards achieving sustainable business. The forum covers a wide range of topics, from advanced design technologies and methods in fields such as 3D ICs, chiplets, chips for AI and ML (machine learning), and IC packaging, to the design, analysis, and collaborative development of electronic systems, including printed circuit boards, across multiple domains, as well as building ecosystems both internally and externally using digital threads. Through case presentations and explanations of design methods by industry leaders, it supports solutions to challenges faced in daily design work from all directions. This is a free technical event that requires pre-registration. We hope you will participate!