Analysis Software Product List and Ranking from 162 Manufacturers, Suppliers and Companies | IPROS

Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.

Analysis Software Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.

  1. JIPテクノサイエンス Tokyo//Information and Communications
  2. 応用計測サービス Saitama//Other construction industries
  3. アドバンスドナレッジ研究所 Tokyo//Building materials, supplies and fixtures manufacturers
  4. 4 ミューテック Kanagawa//Facility Design Office
  5. 5 ウェーブフロント 本社 Kanagawa//others
Go to Company Ranking

Analysis Software Product ranking

Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.

  1. PLAXIS Monopile Designer JIPテクノサイエンス
  2. General-purpose linear and nonlinear structural analysis system "DIANA" JIPテクノサイエンス
  3. High-speed general-purpose plasma analysis software 'VizGlow' ウェーブフロント 本社
  4. 3D Ground Analysis Software "PLAXIS 3D" JIPテクノサイエンス
  5. 4 "EnergyWin" power plant thermal efficiency analysis technical support 電力テクノシステムズ

Analysis Software Product List

151～180 item / All 795 items

Displayed results
Particle-based Plasma Analysis Software 'Particle-PLUS'

Particle-based Plasma Analysis Software 'Particle-PLUS'

"Particle-PLUS" is a plasma analysis software suitable for simulations such as plasma reaction furnaces and chemical vapor deposition (CVD).

Particle-PLUS is plasma and rarefied fluid analysis software that uses the particle method. It is effective for research, development, and manufacturing of devices and materials using plasma. It is also capable of analyzing advanced physical models such as dual-frequency CCP and external circuit models. With comprehensive support, even those new to simulation or busy with experiments can reliably achieve results. The software employs a particle model to analyze plasma, utilizing the PIC/MC (Particle In Cell / Monte Carlo) method to track the motion of particles representing electrons and ions. Depending on the target plasma density, it efficiently switches between implicit methods for relatively high densities and explicit methods for low densities, allowing for effective solutions even for complex models. It excels in plasma simulations of low-pressure gases, where fluid modeling is particularly challenging. In addition to standard functions for CCP, ICP, and magnetron sputtering calculations, customization to fit customer devices is also available.

  • Scientific Calculation and Simulation Software
  • Other Software
  • Other analytical equipment
  • Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fluid analysis software Simerics MP+ for oil pumps.

Fluid analysis software Simerics MP+ for oil pumps.

Simulating the flow characteristics of volumetric pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow fields (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automobiles and construction machinery, with examples including vane pumps for power steering and CVTs, as well as trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, we encourage you to see the actual mesh creation and movement in a demo presentation!!

  • Other Software
  • Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-speed general-purpose plasma analysis software 'VizGlow'

High-speed general-purpose plasma analysis software 'VizGlow'

This software was developed by Professor Raja, an expert in plasma simulation at the University of Texas at Austin.

VizGlow is a general-purpose plasma simulation software developed by Esgee Technologies, Inc., founded by Professor Raja from the University of Texas at Austin, an expert in plasma simulation.

  • Other Software
  • Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Analysis Case] Transient Flow Analysis of Axial Piston Pump

[Analysis Case] Transient Flow Analysis of Axial Piston Pump

By utilizing the PumpLinx simulator for pump transient flow characteristics, smooth flow analysis within axial piston pumps can be conducted.

PumpLinx has mesh templates for various types of pumps. By using templates corresponding to the pump type being analyzed, the time and effort spent on mesh generation, which typically takes a lot of resources for fluid analysis of standard pumps, can be significantly reduced and streamlined. For example, even for complex mechanisms like axial piston pumps, optimal meshes for analysis can be automatically and quickly generated based on 3D CAD data by setting parameters such as the number of cylinders. Additionally, the integrated GUI allows for smooth handling of operations such as mesh generation, setting analysis conditions, executing calculations, and displaying results all on one screen, making the analysis easier and faster. Moreover, in many volumetric pumps, including axial piston pumps, there is a possibility of cavitation occurring during the operating cycle. PumpLinx supports cavitation analysis through the adoption of high-precision cavitation models and cavitation damage models.

  • others
  • Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] Utilization of Tools for Functional Safety Design in Accordance with ISO 26262

[Case Study] Utilization of Tools for Functional Safety Design in Accordance with ISO 26262

By utilizing the reliability analysis tool Reliability Workbench, functional safety design in accordance with ISO 26262 can be smoothly implemented.

Reliability Workbench is software based on reliability engineering that analyzes reliability, safety, and other factors. By utilizing features such as setting failure rates using reliability prediction models and fault tree analysis, it enables quantitative safety analysis and supports the smooth implementation of functional safety design in accordance with ISO 26262.

  • others
  • Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Analysis Case] Transient Flow Analysis of an Internal Gear Pump

[Analysis Case] Transient Flow Analysis of an Internal Gear Pump

By utilizing the PumpLinx simulator for pump transient flow characteristics, flow analysis within the internal gear pump can be conducted smoothly.

PumpLinx has mesh templates for various types of pumps. By using templates tailored to the specific pump type being analyzed, the time and effort typically spent on mesh generation for fluid analysis of standard pumps can be significantly reduced and streamlined. For example, even for complex mechanisms like internal gear pumps, optimal meshes for analysis can be quickly and automatically generated based on 3D CAD data by setting parameters such as the number of teeth. Additionally, the integrated GUI allows for smooth handling of operations such as mesh generation, setting analysis conditions, executing calculations, and displaying results all on one screen, making the analysis easier and faster. Furthermore, many positive displacement pumps, including internal gear pumps, may experience cavitation during their operating cycle. PumpLinx supports cavitation analysis through the adoption of high-precision cavitation models and cavitation damage models.

  • others
  • Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Analysis Case] Transient Flow Analysis of Vane Pumps

[Analysis Case] Transient Flow Analysis of Vane Pumps

By utilizing the PumpLinx simulator for pump transient flow characteristics, flow analysis within the vane pump can be conducted smoothly.

PumpLinx has mesh templates for various types of pumps. By using templates tailored to the specific pump type being analyzed, the time and effort typically spent on mesh generation for fluid analysis of standard pumps can be significantly reduced and streamlined. For example, even for complex mechanisms like vane pumps, optimal meshes for analysis can be quickly and automatically generated by setting parameters such as the number of vanes based on 3D CAD data. Additionally, the integrated GUI allows for smooth handling of operations such as mesh generation, setting analysis conditions, executing calculations, and displaying results all on one screen, making the analysis easier and faster. Furthermore, many positive displacement pumps, including internal gear pumps, may experience cavitation during their operating cycle. PumpLinx supports cavitation analysis through the adoption of high-precision cavitation models and cavitation damage models.

  • others
  • Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fluid analysis software for electric pumps, 'Simerics MP+'.

Fluid analysis software for electric pumps, 'Simerics MP+'.

Simulate the flow characteristics of volumetric pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow fields (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Particularly, we encourage you to see the actual mesh creation and movement through a demo presentation!!

  • Other Software
  • Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Analysis software for showerhead-type CVD, "DSMC-Neutrals"

Analysis software for showerhead-type CVD, "DSMC-Neutrals"

Dilute fluid analysis software 'DSMC-Neutrals' that also supports 'shower head type CVD' analysis.

Simulation analysis of gas flow in a shower head type CVD device Initially supports various simulations 【Features】 ■ Adopts unstructured mesh, allowing for calculations that reflect the complex shapes of actual devices ■ High parallel efficiency enables quick computation results even for large-scale geometries ■ Utilizes a particle method, ensuring convergence to a solution even with poor-quality computational grids, unlike fluid models ■ Comprehensive technical support allows beginners and those busy with experiments to reliably achieve results ◆ Supports various cases ◆ - Simulation of dilute gas flow in a vacuum chamber - Simulation of thin film generation in semiconductor manufacturing - Simulation of thin film generation in semiconductor manufacturing such as chemical vapor deposition (CVD), organic light-emitting diode (OLED), and molecular beam epitaxy (MBE) ◆ Outputs various computational results ◆ - Calculation of chemical reactions - Calculation of chemical reactions from Arrhenius-type reaction data - Calculation of dissociation, recombination, and molecular (atomic) exchange reactions - Multiple reaction equations can be set up on the GUI *We also offer contract analysis, so please feel free to contact us.*

  • Scientific Calculation and Simulation Software
  • Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Dust behavior analysis software 'DSMC-Neutrals'

Dust behavior analysis software 'DSMC-Neutrals'

"Dust behavior affecting contamination" analysis supported by the rarefied fluid analysis software 'DSMC-Neutrals'.

Simulation Analysis of Dust Behavior Affecting Contamination Initially compatible with various simulations 【Features】 ■ By adopting unstructured meshes, it is possible to compute the exact shape of complex actual devices. ■ High parallel efficiency allows for quick computation results even for large-scale shapes. ■ Since a particle method is used, unlike fluid models, convergence solutions can always be obtained even with poor quality computational grids. ■ With comprehensive technical support, even those new to simulations or busy with experiments can reliably achieve results. ◆ Compatible with various cases ◆ - Simulation of rarefied gas flow in a vacuum chamber - Simulation of thin film generation in semiconductor manufacturing - Simulation of thin film generation in semiconductor manufacturing such as Chemical Vapor Deposition (CVD), Organic EL (OLED), and Molecular Beam Epitaxy (MBE) ◆ Outputs various computation results ◆ - Calculation of chemical reactions - Calculation of chemical reactions from Arrhenius-type reaction data - Calculation of dissociation, recombination, and molecular (atomic) exchange reactions - Multiple reaction equations can be set up on the GUI *We also offer contract analysis, so please feel free to contact us.

  • Scientific Calculation and Simulation Software
  • Other Hydrogen/Fuel Cells
  • Other Software
  • Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
CCP simulation analysis software "Particle-PLUS"

CCP simulation analysis software "Particle-PLUS"

"Particle-PLUS" is a plasma and rarefied fluid analysis software that is also skilled in 2-frequency CCP analysis using the particle method.

"Particle-PLUS" is a simulation software suitable for research and development of devices using plasma, compatible with CCP. - Excels in plasma simulation for low-pressure gases, where fluid modeling is challenging. - Advanced physical model analysis, including CCP and external circuit models. - Supports 2D and 3D, efficiently analyzing even complex models. - As a strength of our in-house developed software, it offers standard functions for CCP and magnetron sputtering calculations, as well as customization to fit customer devices. ◆ Supports various cases ◆ - Magnetron sputtering - PVD, plasma CVD - Capacitive Coupled Plasma (CCP) - Dielectric Barrier Discharge (DBD), etc. ◆ Outputs various calculation results ◆ - Potential distribution - Electron and ion density distribution/temperature distribution/generation distribution - Particle flux and energy flux to the walls - Energy spectrum of electrons and ions at the walls - Neutral gas density distribution/temperature distribution/velocity distribution, etc. *For more details, please feel free to contact us at information@wavefront.co.jp.

  • Scientific Calculation and Simulation Software
  • Other Software
  • Other analytical equipment
  • Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Analysis software for CVD equipment 'Particle-PLUS'

Analysis software for CVD equipment 'Particle-PLUS'

"Particle-PLUS" is a plasma and rarefied fluid analysis software that excels in 2-frequency CCP analysis using the particle method.

"Particle-PLUS" is a simulation software suitable for research and development of devices and equipment using plasma, compatible with CCP. - Excels in simulating low-pressure gases where fluid models are difficult to compute. - Advanced physical model analysis including CCP and external circuit models. - Supports 2D (two-dimensional) and 3D (three-dimensional) analysis, efficiently handling complex models. - As a strength of our in-house developed software, it not only includes standard functions for CCP and magnetron sputtering calculations but also allows customization to fit customer equipment. ◆ Supports various cases ◆ - Magnetron sputtering - PVD, plasma CVD - Capacitively coupled plasma (CCP) - Dielectric barrier discharge (DBD), etc. ◆ Outputs various calculation results ◆ - Potential distribution - Density distribution/temperature distribution/generation distribution of electrons and ions - Particle flux and energy flux to the wall - Energy spectrum of electrons and ions at the wall - Density distribution/temperature distribution/velocity distribution of neutral gas, etc. *For more details, please feel free to contact us at information@wavefront.co.jp.

  • Scientific Calculation and Simulation Software
  • Other Software
  • Other analytical equipment
  • Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[For Semiconductors] Analysis Simulation Software *Catalog available

[For Semiconductors] Analysis Simulation Software *Catalog available

For reducing man-hours and costs! Capable of various simulations such as thin film generation, sputtering, and plasma etching. Rest assured with support after implementation.

Our company offers analysis software specialized for semiconductor-related equipment. We have a lineup of rarefied fluid analysis software and plasma analysis software, which are actively used in simulations for organic EL and magnetron sputtering. This is for those who are facing challenges such as "I want to develop new products," "I want to create and verify actual equipment during product improvement," or "I want to conduct preliminary verification and comparative verification with equipment." Additionally, since these are in-house developed products, we provide extensive support even after implementation. 【Lineup / Features】 《Rarefied Fluid Analysis Software 'DSMC-Neutrals'》 ■ Supports unstructured meshes, allowing calculations for complex shapes ■ Capable of simulating gas flow throughout the entire equipment 《Plasma Analysis Software 'Particle-PLUS'》 ■ Enables low-pressure plasma simulations ■ Useful for research, development, and manufacturing of devices and materials using plasma *For more details, please refer to the materials. Feel free to contact us as well.

  • Scientific Calculation and Simulation Software
  • Analysis and prediction system
  • Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
『Simerics MP for SOLIDWORKS』

『Simerics MP for SOLIDWORKS』

Advanced analysis can be easily performed on SOLIDWORKS! For shortening development time and reducing costs.

"Simerics MP for SOLIDWORKS" is a CAD-integrated thermal fluid analysis software that can be operated within SOLIDWORKS. Integrated into the SOLIDWORKS GUI, designers can perform everything from design to analysis themselves. The calculation settings are also simple, allowing for quick mastery of the operation. By enabling designers to conduct various analyses that were traditionally outsourced, such as optimal shape exploration, problem identification, and performance verification, it leads to reduced development time, improved quality, and cost savings. 【Features】 ■ Supports a wide range of simulations including flow, turbulence, heat conduction, and convection ■ Automatically generates calculation meshes directly from CAD surfaces ■ Extremely fast, accurate, and robust solver ■ Stable iterative calculations for very challenging problems such as micro-scale geometries ■ Accurate calculation results that show excellent correlation with physical tests *For more details, please refer to the materials. Feel free to contact us with any inquiries.

  • Scientific Calculation and Simulation Software
  • Other Software
  • Other CAD
  • Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Simerics MP+: A fluid analysis software strong in automotive oil lubrication.

Simerics MP+: A fluid analysis software strong in automotive oil lubrication.

Fluid analysis software for positive displacement pumps such as gear pumps and vane pumps! CFD software specialized for pumps that other CFD software struggles with!

Simerics MP+ is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP, and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow fields (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements for oil pumps used in automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, please see a demo for the actual mesh creation and movement!

  • Other Software
  • Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Supports ICP: Analysis Software 'Particle-PLUS'

Supports ICP: Analysis Software 'Particle-PLUS'

"Particle-PLUS" is a plasma and rarefied fluid analysis software that excels in ICP and CCP analysis using particle methods.

"Particle-PLUS" is software suitable for research and development of devices using plasma, compatible with ICP and CCP. - Excels in simulations of low-pressure gases where fluid modeling is challenging - Calculation functions for inductive heating for ICP simulations - Advanced physical model analysis such as CCP and external circuit models - Capable of simultaneously simulating ICP and CCP - Supports 2D and 3D, efficiently analyzing complex models - As a strength of our in-house developed software, customization to fit customer devices is possible ◆ Supports various cases ◆ - Magnetron sputtering - PVD, plasma CVD - Capacitively coupled plasma (CCP) - Dielectric barrier discharge (DBD), etc. ◆ Outputs various calculation results ◆ - Potential distribution - Density distribution/temperature distribution/generation distribution of electrons and ions - Particle flux and energy flux to the walls - Energy spectrum of electrons and ions at the walls - Density distribution/temperature distribution/velocity distribution of neutral gas and more *For more details, please feel free to contact us. sales@wavefront.co.jp

  • Scientific Calculation and Simulation Software
  • Other Software
  • Other analytical equipment
  • Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fluid analysis software for valves 'SimericsMP+'

Fluid analysis software for valves 'SimericsMP+'

Simulate the flow characteristics of valves and volumetric pumps! A CFD software specialized in valves and pumps, which other CFD software struggles with!

SimericsMP+ is a fluid simulation tool designed to calculate the transient characteristics of various valves, volumetric pumps, and compressors. It is developed based on the thermal fluid simulation tool Simerics MP, utilizing all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! In addition to valve analysis, there has been an increase in achievements with oil pumps for automotive and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Particularly, the actual mesh creation and movement should definitely be demonstrated in a demo!

  • Other Software
  • Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case] 'Particle-PLUS' RF Magnetron Sputtering

[Case] 'Particle-PLUS' RF Magnetron Sputtering

An example of the 'Particle-PLUS' analysis of RF magnetron sputtering, which is one of the film formation methods for dielectric films using process plasma.

"Particle-PLUS" is a simulation software suitable for research, development, and manufacturing of devices and materials using plasma. - It specializes in plasma analysis within vacuum chambers and can perform simulations of film deposition rates at high speed. - It excels in low-pressure plasma analysis. - It is proficient in plasma simulations in low-pressure gases, where calculations using fluid models are challenging. - It supports 2D and 3D, allowing for efficient analysis even with complex models. - As a strength of our in-house developed software, customization to fit the customer's equipment is also possible. ◆ Supports various applications ◆ - Magnetron sputtering - PVD, plasma CVD - Capacitive coupled plasma (CCP) - Dielectric barrier discharge (DBD) - Electrophoresis, etc. ◆ Outputs various calculation results ◆ - Potential distribution - Density distribution/temperature distribution/generation distribution of electrons and ions - Particle flux and energy flux to the walls - Energy spectrum of electrons and ions at the walls - Density distribution/temperature distribution/velocity distribution of neutral gas, etc. *For more details, please feel free to contact us.

  • Scientific Calculation and Simulation Software
  • Other Software
  • Other analytical equipment
  • Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Example] 'Particle-PLUS' DC Magnetron Sputter

[Example] 'Particle-PLUS' DC Magnetron Sputter

A case study of the DC magnetron sputtering method using process plasma, known as 'Particle-PLUS'.

"Particle-PLUS" is a simulation software suitable for research, development, and manufacturing of devices and materials using plasma. - It specializes in low-pressure plasma analysis. - It excels in plasma analysis within vacuum chambers, enabling high-speed simulations of film deposition rates and more. - It is proficient in plasma simulations in low-pressure gases, where calculations using fluid models are challenging. - It supports 2D and 3D, allowing for efficient analysis of complex models. - As a strength of our in-house developed software, customization to fit the customer's equipment is also possible. ◆ Supports various applications ◆ - Magnetron sputtering - PVD, plasma CVD - Capacitive coupled plasma (CCP) - Dielectric barrier discharge (DBD) - Electrophoresis, etc. ◆ Outputs various calculation results ◆ - Potential distribution - Electron and ion density distribution/temperature distribution/generation distribution - Particle flux and energy flux to the walls - Energy spectrum of electrons and ions at the walls - Neutral gas density distribution/temperature distribution/velocity distribution, etc. *For more details, please feel free to contact us.

  • Scientific Calculation and Simulation Software
  • Other Software
  • Other analytical equipment
  • Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Example] Particle-PLUS DC Magnetron Sputter 3D

[Example] Particle-PLUS DC Magnetron Sputter 3D

"Particle-PLUS" specializes in plasma analysis within vacuum chambers and can perform simulations of deposition rates at high speeds.

"Particle-PLUS" is a simulation software suitable for research, development, and manufacturing of devices and materials using plasma. - It excels in low-pressure plasma analysis. - By combining axisymmetric models with mirror-symmetric boundary conditions, it can quickly obtain results without the need for full device simulations. - It specializes in plasma simulations in low-pressure gases, where calculations with fluid models are challenging. - It supports 2D (two-dimensional) and 3D (three-dimensional) analyses, efficiently handling complex models. - As a strength of our in-house developed software, customization to fit the customer's device is also possible. ◆ Supports various applications ◆ - Magnetron sputtering - PVD, plasma CVD - Capacitive coupled plasma (CCP) - Dielectric barrier discharge (DBD) - Electrophoresis, etc. ◆ Outputs various calculation results ◆ - Potential distribution - Density distribution/temperature distribution/generation distribution of electrons and ions - Particle flux and energy flux to the wall - Energy spectrum of electrons and ions at the wall - Density distribution/temperature distribution/velocity distribution of neutral gas, etc. *For more details, please feel free to contact us.

  • Scientific Calculation and Simulation Software
  • Other Software
  • Other analytical equipment
  • Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Simerics MP+ is also used for cooling analysis of motors and batteries.

Simerics MP+ is also used for cooling analysis of motors and batteries.

Not only applicable to hydraulic circuits such as engines and transmissions, but there are also many successful applications in the analysis of oil cooling, water cooling, and air cooling circuits for motors and batteries!

PumpLinx is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes with clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automobiles and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, the actual mesh creation and movement should definitely be demonstrated in a live demo!!

  • Other Software
  • Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cooling analysis of motors also uses 'Simerics MP+'

Cooling analysis of motors also uses 'Simerics MP+'

Not only applicable to hydraulic circuits such as engines and transmissions, but there are also many proven applications for analyzing oil cooling, water cooling, and air cooling circuits for motors and batteries!

PumpLinx is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque Recently, there has been an increase in projects related to oil cooling analysis for automotive motors, and when solving the VOF method with other CFD software, we have received inquiries regarding: - Excessive analysis time - Difficulty in creating fine calculation meshes - Divergence and failure to converge Development-related SAE presentation papers on motor oil cooling can be found at: https://saemobilus.sae.org/content/2020-01-0168/

  • Other Software
  • Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
SimericsMP+, a fluid analysis software for planetary gear systems.

SimericsMP+, a fluid analysis software for planetary gear systems.

Simulating the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

SimericsMP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoid pumps for engine lubrication becoming more common. *There is a lot of information that cannot be posted online. In particular, we encourage you to see the actual mesh creation and movement through a demonstration!

  • Other Software
  • Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
"Analysis is possible even in areas where experiments cannot be conducted" - Surface treatment property prediction solution.

"Analysis is possible even in areas where experiments cannot be conducted" - Surface treatment property prediction solution.

Engineers with specialized knowledge provide support! By combining various analysis software, we can meet diverse demands in surface modification.

We propose a "Surface Treatment Property Prediction Solution" utilizing multiple analysis software. By combining analysis software such as "CAE software," "molecular modeling," and "molecular simulation software," we can cover a wider range of analysis targets. We provide a comprehensive analysis of the creation/processing processes of the material surface you wish to investigate, as well as the properties of the material, along with predictions of the surface state from plasma processing equipment. 【Features】 ■ Various approaches to surface modification are possible by combining different analysis software. ■ Analysis is possible even in areas where experiments cannot be conducted. ■ Plasma analysis is feasible. ■ New material exploration and Materials Informatics (MI) initiatives can be undertaken. ■ Consultations and proposals tailored to customer requests are available. *For more details, please refer to the PDF document or feel free to contact us.

  • Scientific Calculation and Simulation Software
  • Other Software
  • Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] Plasma Analysis of "Particle-PLUS" Dual Frequency CCP

[Case Study] Plasma Analysis of "Particle-PLUS" Dual Frequency CCP

Introduction to Particle-PLUS Analysis Case: "Plasma Analysis of Dual Frequency CCP" Simulation Case

This is a case study on plasma analysis of CCP (Capacitively Coupled Plasma) devices. Particle-PLUS specializes in plasma analysis within vacuum chambers and can perform high-speed simulations even when multiple electrodes are present or when applying overlapping frequencies. ◇ Features of 'Particle-PLUS' - Excels in low-pressure plasma analysis. - By combining axisymmetric models with mirror-symmetric boundary conditions, it can quickly obtain results without the need for full device simulations. - Specializes in plasma simulations for low-pressure gases, where calculations using fluid models are challenging. - Supports 2D (two-dimensional) and 3D (three-dimensional) analyses, efficiently handling complex models. - As a strength of our in-house developed software, customization to fit the customer's device is also possible. ◆ Various calculation results can be output ◆ - Potential distribution - Density distribution/temperature distribution/generation distribution of electrons and ions - Particle flux and energy flux to the wall - Energy spectrum of electrons and ions at the wall - Density distribution/temperature distribution/velocity distribution of neutral gas and more. *For more details, please feel free to contact us.

  • Scientific Calculation and Simulation Software
  • Other Software
  • Other analytical equipment
  • Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Example] Cleaning Process by Particle-PLUS: CCP

[Example] Cleaning Process by Particle-PLUS: CCP

Introduction of Particle-PLUS Analysis Case: "Cleaning Process by CCP" Simulation Case

This is an analysis case regarding CCP (Capacitively Coupled Plasma) etching, which is one of the representative dry etching methods. Particle-PLUS specializes in plasma analysis within vacuum chambers and can quickly simulate etching rates and other parameters. ◇ Features of 'Particle-PLUS' - Excels in low-pressure plasma analysis. - By combining axisymmetric models with mirror-symmetric boundary conditions, it can obtain results quickly without the need for full device simulations. - Specializes in plasma simulations for low-pressure gases, where fluid modeling is challenging. - Supports both 2D and 3D analyses, allowing for efficient analysis of complex models. - As a strength of our in-house developed software, customization to fit customer devices is also possible. ◆ Various calculation results can be output ◆ - Potential distribution - Density distribution/temperature distribution/generation distribution of electrons and ions - Particle flux and energy flux to the walls - Energy spectrum of electrons and ions at the walls - Density distribution/temperature distribution/velocity distribution of neutral gas and more. *For more details, please feel free to contact us.

  • Scientific Calculation and Simulation Software
  • Other Software
  • Other analytical equipment
  • Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Example: Particle-PLUS: GEC-CCP Device Plasma Analysis

Example: Particle-PLUS: GEC-CCP Device Plasma Analysis

Introduction to Particle-PLUS Analysis Case: "Plasma Analysis of GEC-CCP Device" 3D Simulation Case

This is a 3D analysis case related to CCP (Capacitively Coupled Plasma) etching, which is one of the representative dry etching methods. Particle-PLUS specializes in plasma analysis within vacuum chambers and can perform simulations of etching rates and other parameters at high speed. ◇ Features of 'Particle-PLUS' - Excels in low-pressure plasma analysis. - By combining axisymmetric models with mirror-symmetric boundary conditions, it can obtain results quickly without the need for full device simulations. - Specializes in plasma simulations for low-pressure gases, where fluid modeling is challenging. - Supports both 2D and 3D, allowing efficient analysis even for complex models. - As a strength of our in-house developed software, customization to fit customer devices is also possible. ◆ Various calculation results can be output ◆ - Potential distribution - Density distribution/temperature distribution/generation distribution of electrons and ions - Particle flux and energy flux to the walls - Energy spectrum of electrons and ions at the walls - Density distribution/temperature distribution/velocity distribution of neutral gas and more. *Please feel free to contact us for more details.

  • Scientific Calculation and Simulation Software
  • Other Software
  • Other analytical equipment
  • Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Example] Particle-PLUS: 3D Counter Target Type Patter

[Example] Particle-PLUS: 3D Counter Target Type Patter

Introduction of Particle-PLUS Analysis Case: "Opposing Target Type Patter (3D Analysis)" Simulation Case

This is an analysis case of a counter-target sputtering method, which is one of the film formation techniques that causes low damage to the substrate. 3D calculations have a higher computational cost compared to 2D calculations, but they allow for simulations that take into account more complex shapes and their effects. ◇ Features of 'Particle-PLUS' - Specializes in low-pressure plasma analysis. - By combining axisymmetric models and mirror-symmetric boundary conditions, results can be obtained quickly without the need to simulate the entire device. - Excels in plasma simulations for low-pressure gases, where calculations using fluid models are challenging. - Supports both 2D and 3D, enabling efficient analysis even for complex models. - As a strength of our in-house developed software, customization to fit the customer's equipment is also possible. ◆ Various calculation results can be output ◆ - Potential distribution - Density distribution/temperature distribution/generation distribution of electrons and ions - Particle flux and energy flux to the wall - Energy spectrum of electrons and ions at the wall - Density distribution/temperature distribution/velocity distribution of neutral gas and more. *Please feel free to contact us for more details.

  • Scientific Calculation and Simulation Software
  • Other Software
  • Other analytical equipment
  • Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
General-purpose linear and nonlinear structural analysis system "DIANA"

General-purpose linear and nonlinear structural analysis system "DIANA"

A general-purpose structural analysis system developed for the civil engineering and architecture fields, accompanied by materials introducing crack analysis features.

This is a general structural analysis system developed by DIANA FEA BV (Netherlands) using the Finite Element Method (FEM). It has a significant track record of use in Japan, particularly in the civil engineering and construction fields, and has received high praise for its nonlinear analyses, especially in concrete crack propagation analysis, elasto-plastic finite displacement analysis of steel structures, and staged construction analysis of ground. 【Main Features】 - Integrated pre-post functionality from model creation to result processing - Easy modeling of reinforcement (embedded reinforcement elements) - Capable of concrete crack models (distributed crack model, discrete crack model) - Consideration of adhesion between different materials (interface elements)

  • diana_a.png
  • diana_bridge.png
  • diana_tunk.png
  • diana-rcs.png
  • diana_crack.png
  • diana_rc.png
  • diana-crack2.png
  • Scientific Calculation and Simulation Software
  • Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2D ground analysis software "PLAXIS 2D"

2D ground analysis software "PLAXIS 2D"

Rich track record in ground analysis both domestically and internationally.

It is a two-dimensional ground analysis software developed by Bentley Systems, capable of applications such as excavation analysis for retaining walls, consolidation settlement analysis due to embankments, slope stability analysis using shear strength reduction methods or limit equilibrium methods, analysis of surrounding effects during tunnel excavation, and thermal conduction analysis. It is dedicated to two-dimensional problems and allows for easy creation of analysis models with a user-friendly interface that feels like CAD. 【Main Features】 - Easy creation of analysis models with a user-friendly interface that feels like CAD - Simple modeling of tunnel shapes - Equipped with specialized elements for piles, anchors, tunnels, etc. - Capable of consolidation analysis, unsteady seepage flow analysis, dynamic analysis, thermal conduction analysis, and slope stability analysis using limit equilibrium methods - Outputs numerical data in tabular format, allowing for easy copy and paste into spreadsheet software *For more details, please refer to the PDF materials or contact us. The PDF materials can be obtained from the "Urban Development Database Site" (https://kensetsu.ipros.jp/product/detail/2000623725).

  • 01_2D_Excavationfoundation00.png
  • 02_2D_2DTailingdam02.PNG
  • 05_PLAXIS 2D LE.png
  • Scientific Calculation and Simulation Software
  • Analysis Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Analysis Software

Related Categories of Analysis Software

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.