soft Product List and Ranking from 1808 Manufacturers, Suppliers and Companies | IPROS

Last Updated： Aggregation Period:Mar 25, 2026～Apr 21, 2026
This ranking is based on the number of page views on our site.

soft Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Mar 25, 2026～Apr 21, 2026
This ranking is based on the number of page views on our site.

  1. ユニオンシステム Osaka//Information and Communications
  2. アークシステム 本社 Kanagawa//others
  3. シネマレイ 名古屋本社 Aichi//Information and Communications
  4. 4 JIPテクノサイエンス Tokyo//Information and Communications
  5. 5 B7 Tokyo//Information and Communications
Go to Company Ranking

soft Product ranking

Last Updated： Aggregation Period:Mar 25, 2026～Apr 21, 2026
This ranking is based on the number of page views on our site.

  1. Super Build／SS7 Op.木造ラーメン ユニオンシステム
  2. Safety Education and Technical Education VR シネマレイ 名古屋本社
  3. Quicker and more accurate construction cost estimation! Drawing extraction software Hiroi-kun III アークシステム 本社
  4. 4 PLAXIS HSLSモデル JIPテクノサイエンス
  5. 5 Easy operation with just a click" - Drawing extraction software "Hiroi-kun III アークシステム 本社

soft Product List

751～780 item / All 6425 items

Displayed results
[Example] Particle-PLUS DC Magnetron Sputter 3D

[Example] Particle-PLUS DC Magnetron Sputter 3D

"Particle-PLUS" specializes in plasma analysis within vacuum chambers and can perform simulations of deposition rates at high speeds.

"Particle-PLUS" is a simulation software suitable for research, development, and manufacturing of devices and materials using plasma. - It excels in low-pressure plasma analysis. - By combining axisymmetric models with mirror-symmetric boundary conditions, it can quickly obtain results without the need for full device simulations. - It specializes in plasma simulations in low-pressure gases, where calculations with fluid models are challenging. - It supports 2D (two-dimensional) and 3D (three-dimensional) analyses, efficiently handling complex models. - As a strength of our in-house developed software, customization to fit the customer's device is also possible. ◆ Supports various applications ◆ - Magnetron sputtering - PVD, plasma CVD - Capacitive coupled plasma (CCP) - Dielectric barrier discharge (DBD) - Electrophoresis, etc. ◆ Outputs various calculation results ◆ - Potential distribution - Density distribution/temperature distribution/generation distribution of electrons and ions - Particle flux and energy flux to the wall - Energy spectrum of electrons and ions at the wall - Density distribution/temperature distribution/velocity distribution of neutral gas, etc. *For more details, please feel free to contact us.

  • Scientific Calculation and Simulation Software
  • Other Software
  • Other analytical equipment
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Example] CCP using the Particle-PLUS external circuit model

[Example] CCP using the Particle-PLUS external circuit model

Introduction of Particle-PLUS Analysis Case: Considering a π-type matching box as an external circuit, CCP plasma simulation is possible.

"Particle-PLUS" is a simulation software suitable for research, development, and manufacturing of devices and materials using plasma. - It specializes in low-pressure plasma analysis. - By combining axisymmetric models with mirror-symmetric boundary conditions, it can quickly obtain results without the need for full device simulations. - It excels in plasma simulations for low-pressure gases, where fluid modeling is challenging. - It supports 2D (two-dimensional) and 3D (three-dimensional) analyses, allowing efficient analysis of complex models. - As a strength of our in-house developed software, customization to fit the customer's equipment is also possible. ◆ Supports various applications ◆ - Magnetron sputtering - PVD, plasma CVD - Capacitive coupled plasma (CCP) - Dielectric barrier discharge (DBD) - Electrophoresis, etc. ◆ Outputs various calculation results ◆ - Potential distribution - Density distribution/temperature distribution/generation distribution of electrons and ions - Particle flux and energy flux to the wall - Energy spectrum of electrons and ions at the wall - Density distribution/temperature distribution/velocity distribution of neutral gas, etc. *For more details, please feel free to contact us.

  • Scientific Calculation and Simulation Software
  • Other Software
  • Other analytical equipment
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
i-Reporter　Ver.7【ConMas Gateway】

i-Reporter　Ver.7【ConMas Gateway】

Real-time information from all external data sources to i-Reporter forms.

The i-Reporter app can directly acquire data from external data sources in real-time into the report forms. It can also send report input data to external data sources. 【What ConMas Gateway Can Do】 ■ Use the current real information from other systems without automatic report creation. ■ Acquire master data directly and in real-time from various master databases of business systems without using custom masters. ■ Directly acquire business data in real-time from external systems such as core systems, production management systems, and the cloud. ■ Directly acquire data from IoT devices in real-time from the devices. ■ Retrieve input content and images from past i-Reporter reports. *For product details, please download the PDF materials.

  • Power generation equipment
  • Piping and electrical wiring materials
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Calendar-type asset management software FLiPS

Calendar-type asset management software FLiPS

Visualize inspection and production schedules and actual results, along with associated costs, using a calendar format. Plans and records can be integrated and managed as events on a timeline.

FLiPS is an asset management system developed with the aim of providing a user experience similar to Excel, and it is particularly recommended for customers facing the following challenges: - A user-friendly interface that is easily accepted on-site, with a desire for integration with ERP systems. - The need to centrally manage the quality of manufactured products and the condition of equipment. - The desire to visualize the costs, schedules, and actual results necessary for equipment maintenance in a calendar format. - The need to understand the frequency and number of unexpected failures and to establish maintenance plans based on actual conditions. - The desire to know the optimal cycle for regular inspections and replacements. - The need to streamline budget formulation related to the purchase and maintenance of equipment. Additionally, it has recently been integrated with various IoT-related products, enabling the following capabilities: 1. Automatically creating and notifying maintenance and inspection plans when sensor data indicates thresholds are likely to be exceeded, notifying both managers and workers. 2. Integrating with tablet-compatible systems (such as i-Reporter) to aggregate and visualize information from the field.

  • Other Software
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
MotionBoard Case: Digitizing the situation that was recorded on paper.

MotionBoard Case: Digitizing the situation that was recorded on paper.

Real-time visualization of process management that was dependent on human resources.

■Implementing Company Electronics Manufacturer ■Background In the acceptance inspection of parts, we received the scheduled delivery data for the following week on Thursday, aggregated it in Excel, and created a work plan on paper the day before. However, the paper work plan only indicated the number of deliveries, without showing how many parts were included in each delivery, and the time required for inspection varied by part. Additionally, as the week progressed, the freshness of the scheduled delivery data decreased, leading to a larger discrepancy with the actual number of deliveries. ■Challenges - We wanted to visualize process management in real-time, which had been dependent on manual labor. - We aimed to digitize the status of delays that had been recorded on paper. ■Effects - Reduced the number of workers constantly involved in the acceptance inspection of parts. - Achieved visualization that closely aligns with the expectations of the manufacturing site.

  • BI Tools
  • Database
  • Big Data
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Example] 3D Analysis of the "Particle-PLUS" CCP Device

[Example] 3D Analysis of the "Particle-PLUS" CCP Device

Introduction to Particle-PLUS Analysis Case Studies: "Three-Dimensional Analysis of Capacitively Coupled Plasma (CCP)" Simulation Case Study

"Particle-PLUS" is a simulation software suitable for research, development, and manufacturing of devices and materials using plasma. - It excels in low-pressure plasma analysis. - By combining axisymmetric models with mirror-symmetric boundary conditions, it can quickly obtain results without the need for full device simulations. - It specializes in plasma simulations in low-pressure gases, where calculations with fluid models are challenging. - It supports 2D (two-dimensional) and 3D (three-dimensional) analyses, allowing efficient analysis even for complex models. - As a strength of our in-house developed software, customization to fit the customer's device is also possible. ◆ Supports various cases ◆ - Magnetron sputtering - PVD, plasma CVD - Capacitive coupled plasma (CCP) - Dielectric barrier discharge (DBD) - Electrophoresis, etc. ◆ Outputs various calculation results ◆ - Potential distribution - Electron and ion density distribution/temperature distribution/generation distribution - Particle flux and energy flux to the wall - Energy spectrum of electrons and ions at the wall - Neutral gas density distribution/temperature distribution/velocity distribution, etc. *For more details, please feel free to contact us.

  • Scientific Calculation and Simulation Software
  • Other Software
  • Other analytical equipment
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Example] STM Simulation of MaterialsStudio

[Example] STM Simulation of MaterialsStudio

Introduction of STM image simulation examples of CO on Pd in "Materials Studio".

Case Study Utilizing "Materials Studio" ◇ Example of "STM Simulation of CO on Pd" - The STM simulation can easily distinguish the differences of CO adsorbed on Pd. - The shape of the STM image suggests that the contrast is primarily due to the π orbitals of the CO molecules. - The colors correspond to the total density of states, with the white areas representing the highest density of states (DOS). ◇ By utilizing "Materials Studio," it contributes to more efficient and easier development of new materials. ■ Also ideal for "Materials Informatics" 【Features】 ■ Simulation software that streamlines material development Available for those engaged in research, development, design, and manufacturing across various industries. ■ Supports various types of materials ■ All tasks, including crystal structure creation, calculation condition setting, and calculation result display, can be performed on a single GUI screen. *For more details, please feel free to contact us. Wavefront Co., Ltd. Sales Department MAIL: sales@wavefront.co.jp

  • Other Software
  • others
  • Scientific Calculation and Simulation Software
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Example] Optical property calculation of coumarin using MaterialsStudio

[Example] Optical property calculation of coumarin using MaterialsStudio

Introduction to simulation examples of optical property calculations of coumarin using Materials Studio.

Case Study Utilizing "Materials Studio" ◇ Coumarin molecules are a type of aromatic compound derived from plants, represented by cherry leaves. Additionally, coumarin molecules are known to be optically active. By utilizing one of the modules, "DMOL3," it is helpful to understand optical properties in such cases. In this case study, the optical properties of coumarin molecules were simulated in both a vacuum and an aqueous solvent. Furthermore, the consideration of the solvent was done using the COSMO solvent model. 【Features】 ■ Also optimal for "Materials Informatics" ■ Simulation software that streamlines material development Available for use by those engaged in research, development, design, and manufacturing across various industries ■ Helps in the development of new materials more efficiently and easily. ■ Supports various types of materials ■ Allows for the creation of crystal structures, setting of calculation conditions, and display of calculation results all on a single GUI screen *For more details, please feel free to contact us. Wavefront Co., Ltd. Sales Department MAIL: sales@wavefront.co.jp

  • Other Software
  • others
  • Scientific Calculation and Simulation Software
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Data utilization in the manufacturing site: 'MotionBoard'

Data utilization in the manufacturing site: 'MotionBoard'

Quickly aggregate information from the manufacturing site and visualize it in real time.

Motion Board meets various data utilization needs in manufacturing sites. By centralizing data that was managed separately for each system and analyzing it from multiple perspectives, you can gain new insights that you may not have noticed before. ■ Are you facing these challenges? - Delayed understanding of on-site conditions, making it difficult to quickly notice problems - Manually entering handwritten daily reports into Excel, which is time-consuming - The occurrence of defective products and low yield in the production area - Difficulty in quickly detecting equipment abnormalities - Data management is fragmented across different systems, making it hard to access necessary information promptly We solve these issues in the production area. ◆ Free trial available ◆

  • BI Tools
  • Big Data
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Example] MaterialsStudio Semiconductor Band Gap Calculation

[Example] MaterialsStudio Semiconductor Band Gap Calculation

"Materials Studio" is also useful for semiconductor material development. [Example] We will guide you through the band gap calculation of semiconductor GaAs.

◇Introduction to Band Gap Calculation Examples of Semiconductor GaAs - GaAs, a semiconductor, is used in transistors and has a high electron mobility characteristic. - The energy level between the valence band and the conduction band is called the band gap. - By investigating the band gap, characteristics such as electrical conductivity and conversion efficiency can be understood. - Using quantum mechanical calculations, it is also possible to investigate semiconductors that are attracting attention as materials. 【Product Features】 ■ Also ideal for "Materials Informatics" ■ Simulation software that streamlines material development Available for use by those engaged in research, development, design, and manufacturing across various industries. ■ Helps in the development of new materials more efficiently and easily. ■ Compatible with various types of materials. ■ All tasks, including crystal structure creation, calculation condition setting, and calculation result display, can be performed on a single GUI screen. *For more details, please feel free to contact us. Wavefront Co., Ltd. Sales Department MAIL: sales@wavefront.co.jp

  • Other Software
  • others
  • Scientific Calculation and Simulation Software
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
MotionBoard Case Study: Data Utilization and Visualization in Food Manufacturing Sites

MotionBoard Case Study: Data Utilization and Visualization in Food Manufacturing Sites

Achieving real-time visualization of production schedule management and equipment monitoring.

MotionBoard meets various data utilization needs in food manufacturing sites. It allows for easy creation of visually appealing screens without programming. Users can accurately grasp the timing of tasks that were previously based on experience and intuition. ■ Implementing Companies Food manufacturers ■ Challenges - Want to visualize performance and operations on management boards - Desire to understand performance and operational status through easy-to-understand screens - Monthly creation leads to challenges in real-time capability and accuracy ■ Implementation Points - Capable of collecting, analyzing, and visualizing real-time data - MotionBoard allows for the creation of easy-to-understand graphs without programming - Utilized for a wide range of applications from production schedule management to integration with IoT systems ■ Effects - Achieved visualization of information requiring real-time capability - Enabled equipment maintenance tasks based on accurate data rather than intuition - Improved product quality through data utilization, such as detecting foreign substances in raw materials The time required for data analysis and visualization has been reduced to less than one-tenth, while ensuring real-time capability.

  • BI Tools
  • Big Data
  • IoT
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Simerics MP+ is also used for cooling analysis of motors and batteries.

Simerics MP+ is also used for cooling analysis of motors and batteries.

Not only applicable to hydraulic circuits such as engines and transmissions, but there are also many successful applications in the analysis of oil cooling, water cooling, and air cooling circuits for motors and batteries!

PumpLinx is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes with clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automobiles and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, the actual mesh creation and movement should definitely be demonstrated in a live demo!!

  • Other Software
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cooling analysis of motors also uses 'Simerics MP+'

Cooling analysis of motors also uses 'Simerics MP+'

Not only applicable to hydraulic circuits such as engines and transmissions, but there are also many proven applications for analyzing oil cooling, water cooling, and air cooling circuits for motors and batteries!

PumpLinx is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque Recently, there has been an increase in projects related to oil cooling analysis for automotive motors, and when solving the VOF method with other CFD software, we have received inquiries regarding: - Excessive analysis time - Difficulty in creating fine calculation meshes - Divergence and failure to converge Development-related SAE presentation papers on motor oil cooling can be found at: https://saemobilus.sae.org/content/2020-01-0168/

  • Other Software
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Example] Materials Studio - Prediction of Physical Properties of Organic Molecules

[Example] Materials Studio - Prediction of Physical Properties of Organic Molecules

[Case Study] Materials Studio: Application of Machine Learning to Organic Molecules - Application Case of Material Informatics for Predicting the Properties of Organic Molecules

◇Materials Studio: A Case Study on the Application of Material Informatics (MI) to Predict the Properties of Organic Molecules - This presentation introduces a case where the "Materials Studio" and "Pipeline Pilot" tools are used to estimate the lipophilicity and hydrophilicity of organic molecules. 【Product Features】 ■ Also optimal for "Materials Informatics" ■ Simulation software that streamlines material development Available for use by those engaged in research, development, design, and manufacturing across various industries ■ Helps in the development of new materials more efficiently and easily. ■ Supports various types of materials ■ Allows for the creation of crystal structures, setting of calculation conditions, and display of calculation results all within a single GUI screen *For more details, please feel free to contact us. Wavefront Co., Ltd. Sales Department MAIL: sales@wavefront.co.jp

  • Other Software
  • others
  • Scientific Calculation and Simulation Software
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
CAE agent model software "Particle-PLUS/DL"

CAE agent model software "Particle-PLUS/DL"

Generate machine learning data from CAE analysis models! Software that allows for easy execution of computational results in plasma analysis.

"Particle-PLUS/DL" is a CAE surrogate model software that addresses the challenges of traditional plasma simulations. It integrates deep learning, which is gaining attention as the "fourth science," with CAE. It enables parametric studies through high-speed calculations and is expected to be useful in the initial examination of plasma analysis. Additionally, it can generate training data for machine learning from CAE analysis models, allowing for analysis even without a large amount of experimental data. 【Features】 ■ Results can be confirmed in a few seconds ■ Simple and easy-to-understand GUI ■ Plasma analysis is possible even without a large amount of experimental values ■ Does not diverge ■ Compatible with Windows 10 machines *For more details, please refer to the PDF document or feel free to contact us.

  • Scientific Calculation and Simulation Software
  • Other Software
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] Investigation of Graphene Materials for Li-S Batteries

[Case Study] Investigation of Graphene Materials for Li-S Batteries

"Materials Studio" can perform battery property calculations [Case Study] Here we introduce a paper case.

By using nitrogen-doped metal graphene for the cathode, we analyze the adsorption energy on the metal part concerning lithium polysulfide intermediates. ◎ Calculation Model Using the DMol3 module in 'Materials Studio' for quantum mechanical calculations - The adsorption energy was determined by performing energy calculations on the structure. - Similar calculations were conducted for multiple polysulfides and patterns of metal atoms on graphene, allowing for comparisons of the relationship between the number of sulfur atoms in polysulfides and the adsorption energy. ◎ Discussion of Obtained Physical Property Values - Various PDOS and energy values for Li2Sn/AM were presented. - It was observed that when Cr, Fe, Mn, and Cu were used among the metals investigated, there is a strong interaction between polysulfides and Co-N4/graphene, and that this interaction strengthens as the chain length of the polysulfides decreases. 【Product Features】 ■ Also optimal for "Materials Informatics (MI)" ■ Simulation software that streamlines material development ■ Helps in the development of new materials more efficiently and easily *For more details, please feel free to contact us.

  • Other Software
  • others
  • Scientific Calculation and Simulation Software
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Predictive modeling software "Neural Designer"

Predictive modeling software "Neural Designer"

A deep learning prediction model and surrogate model can be built on the screen! It also supports multi-objective optimization.

"Neural Designer" is a no-code application for data science and machine learning. It allows for the easy construction of predictive models and surrogate models using AI (deep learning). The supported predictive models include approximation models, classification models, and time series forecasting models. By using this product, simulations that previously took about a week can now yield results in just a few seconds to a few minutes, making it very effective for simulations that require long computational times. [Features] - No programming required; predictive models can be built using only GUI settings with deep learning. - The relationship between the target variable and each design variable is expressed in the form of y=f(x). - The created models can be output in C or Python format. *For more details, please refer to the PDF materials or feel free to contact us.

  • Analysis and prediction system
  • Other Software
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
SimericsMP+, a fluid analysis software for planetary gear systems.

SimericsMP+, a fluid analysis software for planetary gear systems.

Simulating the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

SimericsMP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoid pumps for engine lubrication becoming more common. *There is a lot of information that cannot be posted online. In particular, we encourage you to see the actual mesh creation and movement through a demonstration!

  • Other Software
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Surface treatment property prediction solution

Surface treatment property prediction solution

We propose a surface treatment property prediction solution utilizing multiple analysis software.

By combining CAE software, molecular modeling, and molecular simulation software, we can cover a wider range of analysis targets! For example, the creation/processing of material surfaces and material properties, etc. We provide a comprehensive analysis of plasma process equipment and predictions of surface state characteristics! 【Physical phenomena to be analyzed】 - Bonding and activation - Film formation - Sputtering and etching - Desorption and cleaning, etc. 【Examples of surface properties that can be evaluated】 - Evaluation of the incident amount and energy of raw gas or plasma, or the etching/film formation rate - Evaluation of material properties based on atomic/molecular data of substances - Prediction of surface reactions of incident particles - Evaluation of surface roughness after processing - Changes in hydrophilicity before and after processing - Calculation of the refractive index of crystals after processing, etc. *For more details, please refer to the PDF document or feel free to contact us.

  • Scientific Calculation and Simulation Software
  • Other Software
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
"Analysis is possible even in areas where experiments cannot be conducted" - Surface treatment property prediction solution.

"Analysis is possible even in areas where experiments cannot be conducted" - Surface treatment property prediction solution.

Engineers with specialized knowledge provide support! By combining various analysis software, we can meet diverse demands in surface modification.

We propose a "Surface Treatment Property Prediction Solution" utilizing multiple analysis software. By combining analysis software such as "CAE software," "molecular modeling," and "molecular simulation software," we can cover a wider range of analysis targets. We provide a comprehensive analysis of the creation/processing processes of the material surface you wish to investigate, as well as the properties of the material, along with predictions of the surface state from plasma processing equipment. 【Features】 ■ Various approaches to surface modification are possible by combining different analysis software. ■ Analysis is possible even in areas where experiments cannot be conducted. ■ Plasma analysis is feasible. ■ New material exploration and Materials Informatics (MI) initiatives can be undertaken. ■ Consultations and proposals tailored to customer requests are available. *For more details, please refer to the PDF document or feel free to contact us.

  • Scientific Calculation and Simulation Software
  • Other Software
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] Water Adsorption on the Surface of V2O5 Electrodes Used in Water Batteries

[Case Study] Water Adsorption on the Surface of V2O5 Electrodes Used in Water Batteries

"Materials Studio" can perform battery property calculations [Case Study] Here we introduce a paper case study.

In this paper, we analyze the behavior of water molecules adsorbed on surfaces such as V2O5(1 0 0) using Materials Studio. ◇ It is possible to analyze the relationship between functional groups on the surface of 2D layers, density of states, and adsorption properties. 【Product Features】 ■ Also optimal for "Materials Informatics (MI)" ■ Simulation software that streamlines material development ■ Helps in the development of new materials more efficiently and easily *For more details, please feel free to contact us.

  • Other Software
  • others
  • Scientific Calculation and Simulation Software
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] Plasma Analysis of "Particle-PLUS" Dual Frequency CCP

[Case Study] Plasma Analysis of "Particle-PLUS" Dual Frequency CCP

Introduction to Particle-PLUS Analysis Case: "Plasma Analysis of Dual Frequency CCP" Simulation Case

This is a case study on plasma analysis of CCP (Capacitively Coupled Plasma) devices. Particle-PLUS specializes in plasma analysis within vacuum chambers and can perform high-speed simulations even when multiple electrodes are present or when applying overlapping frequencies. ◇ Features of 'Particle-PLUS' - Excels in low-pressure plasma analysis. - By combining axisymmetric models with mirror-symmetric boundary conditions, it can quickly obtain results without the need for full device simulations. - Specializes in plasma simulations for low-pressure gases, where calculations using fluid models are challenging. - Supports 2D (two-dimensional) and 3D (three-dimensional) analyses, efficiently handling complex models. - As a strength of our in-house developed software, customization to fit the customer's device is also possible. ◆ Various calculation results can be output ◆ - Potential distribution - Density distribution/temperature distribution/generation distribution of electrons and ions - Particle flux and energy flux to the wall - Energy spectrum of electrons and ions at the wall - Density distribution/temperature distribution/velocity distribution of neutral gas and more. *For more details, please feel free to contact us.

  • Scientific Calculation and Simulation Software
  • Other Software
  • Other analytical equipment
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Example] Cleaning Process by Particle-PLUS: CCP

[Example] Cleaning Process by Particle-PLUS: CCP

Introduction of Particle-PLUS Analysis Case: "Cleaning Process by CCP" Simulation Case

This is an analysis case regarding CCP (Capacitively Coupled Plasma) etching, which is one of the representative dry etching methods. Particle-PLUS specializes in plasma analysis within vacuum chambers and can quickly simulate etching rates and other parameters. ◇ Features of 'Particle-PLUS' - Excels in low-pressure plasma analysis. - By combining axisymmetric models with mirror-symmetric boundary conditions, it can obtain results quickly without the need for full device simulations. - Specializes in plasma simulations for low-pressure gases, where fluid modeling is challenging. - Supports both 2D and 3D analyses, allowing for efficient analysis of complex models. - As a strength of our in-house developed software, customization to fit customer devices is also possible. ◆ Various calculation results can be output ◆ - Potential distribution - Density distribution/temperature distribution/generation distribution of electrons and ions - Particle flux and energy flux to the walls - Energy spectrum of electrons and ions at the walls - Density distribution/temperature distribution/velocity distribution of neutral gas and more. *For more details, please feel free to contact us.

  • Scientific Calculation and Simulation Software
  • Other Software
  • Other analytical equipment
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Example: Particle-PLUS: GEC-CCP Device Plasma Analysis

Example: Particle-PLUS: GEC-CCP Device Plasma Analysis

Introduction to Particle-PLUS Analysis Case: "Plasma Analysis of GEC-CCP Device" 3D Simulation Case

This is a 3D analysis case related to CCP (Capacitively Coupled Plasma) etching, which is one of the representative dry etching methods. Particle-PLUS specializes in plasma analysis within vacuum chambers and can perform simulations of etching rates and other parameters at high speed. ◇ Features of 'Particle-PLUS' - Excels in low-pressure plasma analysis. - By combining axisymmetric models with mirror-symmetric boundary conditions, it can obtain results quickly without the need for full device simulations. - Specializes in plasma simulations for low-pressure gases, where fluid modeling is challenging. - Supports both 2D and 3D, allowing efficient analysis even for complex models. - As a strength of our in-house developed software, customization to fit customer devices is also possible. ◆ Various calculation results can be output ◆ - Potential distribution - Density distribution/temperature distribution/generation distribution of electrons and ions - Particle flux and energy flux to the walls - Energy spectrum of electrons and ions at the walls - Density distribution/temperature distribution/velocity distribution of neutral gas and more. *Please feel free to contact us for more details.

  • Scientific Calculation and Simulation Software
  • Other Software
  • Other analytical equipment
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Example] Particle-PLUS: 3D Counter Target Type Patter

[Example] Particle-PLUS: 3D Counter Target Type Patter

Introduction of Particle-PLUS Analysis Case: "Opposing Target Type Patter (3D Analysis)" Simulation Case

This is an analysis case of a counter-target sputtering method, which is one of the film formation techniques that causes low damage to the substrate. 3D calculations have a higher computational cost compared to 2D calculations, but they allow for simulations that take into account more complex shapes and their effects. ◇ Features of 'Particle-PLUS' - Specializes in low-pressure plasma analysis. - By combining axisymmetric models and mirror-symmetric boundary conditions, results can be obtained quickly without the need to simulate the entire device. - Excels in plasma simulations for low-pressure gases, where calculations using fluid models are challenging. - Supports both 2D and 3D, enabling efficient analysis even for complex models. - As a strength of our in-house developed software, customization to fit the customer's equipment is also possible. ◆ Various calculation results can be output ◆ - Potential distribution - Density distribution/temperature distribution/generation distribution of electrons and ions - Particle flux and energy flux to the wall - Energy spectrum of electrons and ions at the wall - Density distribution/temperature distribution/velocity distribution of neutral gas and more. *Please feel free to contact us for more details.

  • Scientific Calculation and Simulation Software
  • Other Software
  • Other analytical equipment
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Predictive modeling software 'Neural Designer'

Predictive modeling software 'Neural Designer'

Easily build predictive models and surrogate models using AI (deep learning). Japanese version released.

"Neural Designer" is a no-programming-required application that allows you to easily build predictive models using deep learning. It supports the creation of three types of predictive models: approximation models, classification models, and time series forecasting models. (In particular, approximation models are also referred to as regression models or surrogate models.) Using various measurement data and simulation results, you can construct predictive models with neural networks. This enables significant time savings in simulations. It is also effective for optimizing operating conditions and settings of various devices and machines. 【Features】 - Not only can you build predictive models, but you can also output relationships and create surrogate models. - Basic statistical processing, such as checking for missing values in data analysis, can be performed with one button. - You can visualize the relationship between the target variable and each design variable in a graph. - The relationship between the target variable and each design variable can be expressed in the form of y=f(x). - The created models can be output in C or Python format. *For more details, please refer to the documentation. Feel free to contact us with any inquiries. ★ With the version upgrade, functionality and convenience have been further enhanced! The "Optimization (Inverse Analysis)" and "Japanese Version" have been released.

  • Other Software
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Would you like to improve business efficiency with "CAE×AI"?

Would you like to improve business efficiency with "CAE×AI"?

We can assist you in improving business efficiency using machine learning and AI! We will introduce our software and analysis examples.

It is said that we have entered an era where the use of machine learning and AI is desired in research and development. Our company assists in improving operational efficiency through the use of machine learning and AI. Experienced engineers will propose various plans tailored to our customers' needs, such as "package software sales" and "contract analysis." Please feel free to contact us when you need assistance. 【Software We Handle】 ■ Predictive modeling tool "Neural Designer" ■ Plasma analysis "Particle PLUS/DL" ■ Data science tool "Pipeline Pilot" ■ Material development analysis software "Materials Studio" ■ Electronic lab notebook "BIOVIA Notebook" *For more details, please refer to the PDF materials or feel free to contact us.

  • Other Software
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Arc Plasma Simulation Software "VizSpark"

Arc Plasma Simulation Software "VizSpark"

For the analysis of arc plasma in circuit breakers and relays. Developed by plasma experts. Demand is increasing in line with the active development of electric vehicles.

The dedicated analysis software for arc discharge, 'VizSpark', not only considers the characteristics of arc plasma but also takes into account the thermal interactions with solids, magnetic fields, and fluid dynamics, making it applicable for a wide range of purposes. It can analyze the heat generated by arc plasma, the pressure and temperature rise associated with heating, as well as the energy efficiency of the arc plasma. 【Features】 ■ Developed by engineers from Esgee Technologies, a company established by experts in plasma simulation in the United States. ■ Allows for accurate verification of arc formation in the development of circuit breakers and relays. ■ Enables prediction of issues caused by overcurrent. ■ By predicting the surface temperature due to the arc, it is possible to forecast wear of terminals and contacts, as well as melting of terminals. ■ Contributes to the improvement of reliability and safety in electric vehicles and home appliances. *For more details, please refer to the materials. Feel free to contact us as well.

  • Other Software
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Optimization software for equipment management business 'AWB'

Optimization software for equipment management business 'AWB'

Maximizing operational efficiency and minimizing costs through maintenance cycle calculations. Supported by experts in equipment management and failure analysis.

The "Availability Workbench (AWB)" is software that calculates the failure probability and lifespan of equipment based on equipment configuration, work performance, and failure history information, supporting maintenance-related tasks. It can seamlessly execute everything from calculating failure rates to calculating lifecycle costs by integrating with various analysis tools, ERP, and EAM. 【Target Operations】 ■ Evaluation of equipment failure characteristics and lifespan under the installation environment and usage conditions of the company ■ Calculation of quantitative values to determine maintenance cycles ■ Verification of the comprehensiveness of tasks and maintenance cycles ■ Optimization of combinations of various tasks ■ Consideration of costs, operational rates, necessary spare parts, and required personnel due to maintenance implementation ■ Determination of maintenance methods based on risk ■ Creation of medium- to long-term maintenance plans based on LCC evaluation *You can view materials introducing the functions from the download button below. Please feel free to contact us.

  • Other Software
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Reliability-Centered Maintenance Support RCM Module

Reliability-Centered Maintenance Support RCM Module

Optimization of preservation strategies! Evaluating whether goals such as safety, operation, and the environment can be achieved together.

"RCMCost" implements Reliability-Centered Maintenance (RCM) based on Failure Mode, Effects, and Criticality Analysis (FMECA). This product supports the achievement of objectives such as minimizing costs, meeting safety and environmental goals, and operational targets. Additionally, it enables the calculation of appropriate maintenance cycles. 【Features】 ■ Project management in bulk through tools ■ Intuitive user interface ■ Compatibility with other modules ■ Ability to calculate appropriate maintenance cycles ■ Support from experts familiar with equipment management and failure analysis across various industries *For more details, please refer to the PDF document or feel free to contact us.

  • Scientific Calculation and Simulation Software
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to soft

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.