analysis(si) - List of Manufacturers, Suppliers, Companies and Products | IPROS

Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.

analysis Product List

1～30 item / All 52 items

Displayed results
OBIRCH analysis of SiC devices using short-wavelength lasers.

OBIRCH analysis of SiC devices using short-wavelength lasers.

Since semiconductors have different physical properties, new methods are required for failure analysis!

Our company conducts OBIRCH analysis of SiC devices using short-wavelength lasers. SiC is a power device with lower energy loss compared to conventional Si semiconductors and is attracting attention. However, since its physical properties differ from those of Si semiconductors, new methods are required for failure analysis. In the backside OBIRCH analysis of SiC-SBD using short-wavelength lasers, localized melting damage was induced in the SiC Schottky barrier diode, resulting in the generation of a pseudo-leak. Locations of pseudo-leaks that could not be confirmed in the IR-OBIRCH analysis were clearly observed in the GL-OBIRCH analysis. *For more details, please refer to the PDF materials or feel free to contact us.

  • Other analytical equipment
  • analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Backside light emission analysis of SiC devices

Backside light emission analysis of SiC devices

Pre-processing of SiC devices → Identification of leakage points → Physical analysis/component analysis handled seamlessly!

Our company conducts "Backside Emission Analysis of SiC Devices." SiC is a power device that has less energy loss compared to conventional Si semiconductors and is attracting attention. However, since its physical properties differ from those of Si semiconductors, new methods are required for failure analysis. In a case study of backside emission analysis of SiC MOSFETs, an overseas SiC MOSFET was subjected to ESD, creating a G-(D,S) leakage, and numerous emissions indicating the leakage points were detected through emission analysis. When the emission points were observed using TEM, damage to the SiO2 film and the SiC crystal was noted. *For more details, please refer to the PDF document or feel free to contact us.

  • Other analytical equipment
  • analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Power semiconductor analysis service

Power semiconductor analysis service

We will handle everything from the evaluation of the diffusion layer to physical analysis/chemical analysis for the faulty area!

At Aites Co., Ltd., we offer analysis services for power semiconductors. Since our separation and independence from the Quality Assurance Department of IBM Japan's Yasu Office in 1993, we have cultivated our own unique analysis and analytical techniques. We can handle not only Si semiconductors but also the trending wide bandgap semiconductors. 【Features】 - OBIRCH analysis supports not only Si but also SiC and GaN devices. - FIB processing is possible from either side. - Visualization of the depletion layer formed at the PN junction. - Elemental analysis such as EDS and EELS is also supported. *For more details, please refer to the PDF document or feel free to contact us.

  • Other analytical equipment
  • analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Failure analysis of power devices

Failure analysis of power devices

We will identify and observe the defective areas of power devices such as diodes, MOS-FETs, and IGBTs.

We perform optimal preprocessing for power devices such as diodes, MOS FETs, and IGBTs of all sizes and shapes, and identify and observe defective areas through backside IR-OBIRCH analysis and backside emission analysis. ■ Preprocessing for Analysis - Backside Polishing - Supports various sample forms. Si chip size: 200um to 15mm square ■ Defective Area Identification - Backside IR-OBIRCH Analysis / Backside Emission Analysis - IR-OBIRCH Analysis: Supports up to 100mA/10V and 100uA/25V Emission Analysis: Supports up to 2kV * Covers a wide range of defect characteristics such as low-resistance shorts, micro-leaks, and high-voltage breakdown failures. ■ Pinpoint Cross-Section Observation of Leak Areas - SEM/TEM - Select SEM or TEM observation based on the predicted defects, allowing for pinpoint physical observation and elemental analysis of leak defect areas.

  • Other analytical equipment
  • analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Analysis of good LCD panels

Analysis of good LCD panels

Check the quality status of LCD components and products! We will analyze the structures of the LCD panel using our analytical methods and expertise!

At AITES, we conduct quality analysis of LCD components/products, confirming the quality status of products based on our expertise in LCD technology. The target panels include SEG-LCD, AM-LCD (a-Si TFT / LTPS TFT), OLED for automotive, monitors, mobile devices, and more. We perform quality analysis using our analytical methods on the various structures of liquid crystal panels. 【Analysis Details (Excerpt)】 <Reliability/Lighting Tests> ■ Classification - Reliability Testing - Lighting Inspection ■ Analytical Methods - Oven Drive Testing - Visual Inspection *For more details, please refer to the PDF document or feel free to contact us.

  • Other analytical equipment
  • analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Analysis of semiconductor diffusion layers using sMIM

Analysis of semiconductor diffusion layers using sMIM

Detect changes in concentration as changes in C! The dC/dV signal can also be obtained, making it effective for analyzing the diffusion layer.

At Aites Co., Ltd., we conduct analysis of semiconductor diffusion layers using sMIM. The Scanning Microwave Impedance Microscopy (sMIM) is characterized by signals that have a linear correlation with dopant concentration. sMIM scans the sample by irradiating microwaves from the tip of a metal probe attached to an SPM and measures the reflected waves to obtain sMIM-C images that have a linear correlation with the concentration of the diffusion layer. The C component of Zs obtained from the reflectivity consists of the oxide film capacitance and the depletion layer capacitance. By utilizing the fact that the depletion layer width changes depending on impurity concentration, we detect changes in concentration as changes in C. [Application Examples] ■ sMIM-C: Visualization of diffusion layers and semi-quantitative evaluation of dopant concentration for various semiconductor devices such as Si, SiC, GaN, InP, and GaAs. ■ dC/dV: Evaluation of diffusion layer shape, determination of p/n polarity, visualization of the depletion layer. *For more details, please refer to the PDF materials or feel free to contact us.

  • Other analytical equipment
  • Analysis and prediction system
  • analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Analysis of the etch pit shape on SiC wafers

Analysis of the etch pit shape on SiC wafers

Introducing a case where etch pits formed on SiC wafers were observed using a 3D X-ray microscope (X-ray CT)!

In order to promote the spread of power semiconductors, the development of low-defect SiC wafers is underway. X-ray CT is a non-destructive method that visualizes the shape of materials in three dimensions and allows for quantitative evaluation. In the PDF document, you can view the CT images obtained when observing the etch pits formed on SiC wafers using a 3D X-ray microscope (X-ray CT). [Overview] ■ Shape analysis of etch pits using X-ray CT *For more details, please refer to the PDF document or feel free to contact us.

  • Non-destructive testing
  • analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D Skeleton Analysis with a Single Camera: "VisionPose Singe3D"

3D Skeleton Analysis with a Single Camera: "VisionPose Singe3D"

Compatible with Unity, iOS/iPadOS, and Android! A posture estimation AI engine that enables easy motion capture without markers.

"VisionPose Single3D" is an SDK (Software Development Kit) for a posture estimation AI engine that captures 3D coordinates with a single camera and detects human skeletal information in real-time. It allows for easy motion capture without the need for calibration. Utilizing technology that estimates 3D coordinates from 2D images, it detects up to 30 key points in 2D coordinates and up to 17 key points in 3D coordinates. The skeletal data obtained from the analysis can be used for commercial purposes as well as for research and development, regardless of the application or genre. ■ Features - Easily obtain 3D coordinates with a single camera - Compatible with Unity, iOS/iPadOS, and Android - No restrictions on usage, including commercial use - Comes standard with two immediately usable applications: └ Real-time skeletal visualization sample app "BodyAndColor" └ Video & still image analysis app "VP Analyzer" (excluding iOS/iPad and Android versions) - Additional learning is possible (additional learning is optional)

  • VR/AR
  • analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FlowDesigner Reverse Analysis!

FlowDesigner Reverse Analysis!

A thermal fluid analysis tool that goes beyond the limits of trial and error.

In general thermal fluid analysis software, designers only input their proposed designs to simulate airflow and temperature distribution. Therefore, if the initial design conditions do not achieve the desired design target, the designer must repeatedly reconsider improvement conditions themselves. To find improvement proposals that can meet the design goals, it is necessary to conduct a vast number of analyses. How can one find a design proposal that achieves the design goals within a limited design review period? FlowDesigner’s inverse analysis function is the only simulation software that can provide the answer!

  • others
  • analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
SuperCartesian: Engine Cylinder Airflow Analysis

SuperCartesian: Engine Cylinder Airflow Analysis

We conducted airflow analysis within the engine cylinder from the intake manifold to the inside of the cylinder.

SuperCartesian: In the analysis of airflow within the engine cylinder, we accurately represented the intake manifold and valve shapes, and conducted airflow analysis from the intake manifold to inside the engine cylinder. When predicting the performance of an internal combustion engine, it is crucial to understand the airflow characteristics of the mixture being delivered into the cylinder. These airflow characteristics are greatly influenced by the shapes of the intake manifold and valves, which in turn affect combustion efficiency. For more details, please download the catalog.

  • Surveying
  • others
  • analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Finite Element Analysis (FEA) application "LISA"

Finite Element Analysis (FEA) application "LISA"

User-friendly finite element analysis package for Windows!

"LISA" is a user-friendly finite element analysis (FEA) application equipped with features such as pre/post processing, solvers, and interfaces. It is designed for not only engineers and students who are beginners in finite element analysis but also for experienced users. It includes integrated features such as a modeler, a multi-threaded solver, and a graphical post-processor. [About Licensing] ■Business/Corporate Single User ■Business/Corporate Multiple Users (max 3) *For more details, please refer to the PDF materials or feel free to contact us.

  • Company：B7
  • Price：Other
  • Other Software
  • analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cooling analysis of motors using 'Simerics MP+'

Cooling analysis of motors using 'Simerics MP+'

Not only applicable to hydraulic circuits such as engines and transmissions, but also has numerous applications in the analysis of oil cooling, water cooling, and air cooling circuits for motors and batteries!

PumpLinx is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP, and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes with clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there have been increasing inquiries about SimericsMP+ due to difficulties with VOF analysis in other CFD software. SimericsMP+ excels in VOF and has a strong reputation for support. *There is a lot of information that cannot be posted online. In particular, please see a demo for actual mesh creation and movement!

  • Other Software
  • analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Contracted analysis service

Contracted analysis service

Support for synchronizing design and analysis with the necessary analysis items for the product design process unit!

Our company supports the synchronization of design and analysis from the early stages of design through static analysis, eigenvalue analysis, contact analysis, buckling eigenvalue analysis, and time history response analysis. We provide the necessary analysis items tailored to your product design process. Additionally, we have extensive experience in contract analysis using general commercial tools. Please feel free to consult us if you have any requests. 【Software We Use】 ■ Creo Parametric, Simulate ■ ProTOp ■ FloEFD ■ Abaqus ■ I-sight ■ Ls-DYNA ■ Transmission3D *For more details, please download the PDF or feel free to contact us.

  • others
  • analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
CAD/CAE Simulation Structural Analysis

CAD/CAE Simulation Structural Analysis

We provide reliable, prompt, and courteous support, training, and services for SOLIDWORKS products.

It is a structural analysis tool that boasts overwhelming ease of use. By virtually validating CAD models using Finite Element Analysis (FEA), it allows for the prediction of the actual physical behavior of products. It offers linear, nonlinear static, and dynamic capabilities.

  • Drawing, tracing, CAD
  • analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Easy skeletal analysis with hardware included: "VisionPoseNano"

Easy skeletal analysis with hardware included: "VisionPoseNano"

Ideal for research and verification of skeletal information! An easy-to-use posture estimation AI engine with included hardware.

"VisionPose Nano" is a posture estimation AI engine that can detect skeletal information using only a web camera. It can detect a total of 30 skeletal points, including 25 joint points of the body and 5 facial parts, in 2D coordinates. The acquired data can also be exported in CSV format. Please format the exported data for analysis and other uses. ■ Features - Skeletal detection is possible with camera footage, both in video and still images. - Provided with hardware, achieving low cost and space-saving. - No complicated setup or installation required. - Detection points include 30 key points, and skeletal information can be easily exported in CSV format. ■ Included Applications - Posture measurement app "PoseMeasure" - VP Analyzer - BodyAndColor *For more details, please download the PDF or feel free to contact us.

  • Scientific Calculation and Simulation Software
  • analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Thermal Fluid Analysis SOLIDWORKS Flow Simulation

Thermal Fluid Analysis SOLIDWORKS Flow Simulation

Achieving seamless design and analysis! Add-in thermal fluid analysis software equipped with a variety of result evaluation functions.

"SOLIDWORKS Flow Simulation" is a thermal fluid analysis software developed for all designers working with SOLIDWORKS. With complete integration into SOLIDWORKS, it achieves a seamless design and analysis process. Its diverse result evaluation features allow for the visualization of fluid flow paths using lines and arrows, and results can also be saved as animations. 【Features】 ■ Complete integration with SOLIDWORKS ■ Diverse result evaluation functions - Streamlines: Visualize the flow paths of fluids using lines and arrows - Contours, Probes: Display calculation results on arbitrary sections or surfaces - XY Plots: Output calculation results on arbitrary sketches - Acoustic Evaluation: Graphs of frequency and sound pressure levels can be output for arbitrary times and coordinates *For more details, please refer to the PDF materials or feel free to contact us.

  • Scientific Calculation and Simulation Software
  • Other Software
  • analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fluid analysis for automotive oil lubrication, "Simerics MP+"

Fluid analysis for automotive oil lubrication, "Simerics MP+"

Fluid analysis software for volumetric pumps such as gear pumps and vane pumps! CFD software specialized for pumps that other CFD software struggles with!

PumpLinx is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes with clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automobiles and construction machinery, such as vane pumps for power steering and CVT, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, we encourage you to see the actual mesh creation and movement through a demonstration!

  • Other Software
  • analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Analysis of electronic circuit boards and components

Analysis of electronic circuit boards and components

Solving customer problems with advanced analysis and "analytical skills"! Introducing case studies of electronic circuit board analysis.

"Analysis of electronic substrates and components" offers surface analysis methods tailored to the customer's desired level of understanding. By employing various techniques such as FT-IR (reflection method, ATR method), XPS surface analysis, and AES depth analysis, we have resolved issues by analyzing the copper surface of electronic substrate wiring patterns. [Case Studies of Electronic Substrate Analysis (Wiring Patterns)] ■ FT-IR (reflection method, ATR method) ■ XPS surface analysis ■ AES depth analysis ■ TOF-SIMS analysis ■ Thermal decomposition GC/MS *For more details, please download the PDF or feel free to contact us.

  • Other analytical equipment
  • analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Platform "Forescout eyeSight"

Platform "Forescout eyeSight"

You can gain our unique insights into the overall picture of the device without interrupting the business process!

"Forescout eyeSight" is a platform that continuously monitors and discovers, classifies, and evaluates connected devices in an agentless manner the moment they connect, without interrupting critical operations. It detects various IP-connected devices in an extended enterprise network in an agentless manner. Detected connected devices are automatically classified by this product and evaluated against the organization's policies. By effectively combining the three functions of detection, classification, and evaluation, it promotes the visualization of devices and the execution of appropriate policies/actions. 【Features】 ■ Provides a real-time integrated inventory of network-connected devices in an agentless manner ■ Acquires contextual information necessary for creating proactive security/compliance policies through accurate profiling of devices ■ Identifies unauthorized, vulnerable, and non-compliant devices, and builds risk mitigation policies, etc. *For more details, please download the PDF or contact us.

  • Other security systems
  • analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Thermal Fluid Analysis CAE Contract Analysis Service

Thermal Fluid Analysis CAE Contract Analysis Service

From electronic devices to architectural environmental design! We provide analysis services tailored to your company's needs!

We offer paid airflow, thermal, and environmental analysis services using our software "FlowDesigner." We analyze invisible air flows, temperature distributions, and contamination levels in spaces through computer simulations. ◆ Recommended for customers who: ◆ - Want to eliminate indoor temperature unevenness and achieve energy savings! - Want to know the current ventilation situation! - Want to create proposal materials for new technical sales! - Have been asked by customers to submit analysis results but... - Want to explain design proposals and improvement plans clearly to customers! - Do not have the resources to conduct thorough simulations in-house. ◆ Software Used ◆ FlowDesigner Our specialized staff will quickly resolve your concerns! Leave everything from model creation to output to us!

  • others
  • analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FEM (Finite Element Method) Contract Analysis Service

FEM (Finite Element Method) Contract Analysis Service

At Benkan Kiko, we offer services such as strength analysis using FEM (Finite Element Method).

The various special fittings for processes handled by Benkan Kiko require a wider range of specifications than commonly used and sold pipe fittings. In particular, pressure resistance performance is an important characteristic for ensuring the behavior and safety of pipe fittings under high pressure. Pressure resistance performance is secured by optimizing the shape and dimensions of the pipe fittings, and one of the design methods used is FEM analysis. This service includes the following main contents: - Design support for piping materials such as pipe fittings using FEM analysis ▻ Design of special-shaped pipe fittings (replacement from cast piping materials in high-pressure environments, etc.) ▻ Evaluation of the pressure resistance performance of existing pipe fittings ▻ Manufacturing of special fittings (support from material procurement to manufacturing, testing, inspection, and shipping) - Various responses are possible by combining with our proprietary technology. For inquiries, please first contact our sales representative or use the web inquiry form on our website. From the initial meeting, a dedicated representative from our technical headquarters will respond, allowing you to directly reflect your requests in the analysis results. We can accommodate various meeting formats, including visits, coming to our office, and web conferences (Zoom, MS Teams, etc.). Please feel free to consult with us.

  • Prefab
  • others
  • Fittings
  • analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Analysis Case] Demagnetization Analysis of Interior Permanent Magnet Synchronous Motor (IPMSM)

[Analysis Case] Demagnetization Analysis of Interior Permanent Magnet Synchronous Motor (IPMSM)

Predicting the demagnetization state due to external factors that cause a magnet to lose its magnetism through analysis!

We would like to introduce the "Magnet Demagnetization Analysis of Interior Permanent Magnet Synchronous Motors (IPMSM)" conducted by our company. The analysis mode is transient response analysis, and the motor specifications are 3-phase, 8-pole, 48-slot, with distributed winding. The driving condition is 3,000 min^-1. As a result of the analysis, it was found that the demagnetization occurs at locations on the rotor core where the magnetic flux density is high, and it was also determined that the surrounding temperature of 125°C affects the coercivity reduction of Nd-Fe-B magnets. 【Analysis Conditions (Partial)】 ■ Analysis Mode: Transient Response Analysis ■ Motor Specifications: 3-phase, 8-pole, 48-slot, distributed winding ■ Driving Condition: 3,000 min^-1 ■ Magnet Surrounding Temperature: 125°C ■ Location of Electrical Short Circuit: Between Stator Windings *Details of the case can be viewed through the related links. For more information, please feel free to contact us.

  • Analysis and prediction system
  • analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] Analysis of Air Gap Magnetic Flux Density in Built-in Magnet Synchronous Motors

[Case Study] Analysis of Air Gap Magnetic Flux Density in Built-in Magnet Synchronous Motors

Understanding the magnetic flux density in the air gap is important! Here are some examples of magnetic flux density analysis for the relevant area.

We would like to introduce our analysis of the "Air Gap Magnetic Flux Density Analysis of Embedded Magnet Synchronous Motors (IPMSM)." The analysis mode used was transient response analysis, and the driving condition was no load at 3,000 min-1, with the analysis executed at the 45° position in the right diagram for 1/8 of the area (2D). As a result of the analysis, it was found that the magnetic flux density penetrating the air gap between the stator and rotor changes relative to the excitation timing of the stator coil of the rotating rotor. Therefore, analyzing the dynamic behavior is considered an effective approach. 【Analysis Conditions】 ■ Analysis Mode: Transient Response Analysis ■ Motor Specifications: 3-phase / 8-pole / 48-slot, distributed winding ■ Driving Conditions: No load / 3,000 min-1 ■ Analysis executed at the 45° position in the right diagram for 1/8 of the area (2D) ■ The air gap (air layer) between the stator and rotor is processed in 4 layers *For detailed information about this case, please refer to the related links. For more information, feel free to contact us.

  • Analysis and prediction system
  • analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Analysis Services <Airflow, Thermal, and Environmental Analysis - Leave it to us!>

Analysis Services <Airflow, Thermal, and Environmental Analysis - Leave it to us!>

We provide analysis services tailored to your company's needs! [Contracted / Commissioned]

Make invisible winds and thermal environments visible! Our specialized staff will provide solutions tailored to your company's challenges and requests! ◆ Recommended for customers like these! ◆ - There are no resources available for thorough simulations in-house. - A client has requested analysis results, but... - I want to explain design proposals and improvement plans clearly to customers! - I want to eliminate temperature variations in the factory and achieve energy savings! - I want to create proposal materials for new technical sales! ◆ Software used ◆ Thermal and airflow simulation software 'FlowDesigner'

  • Scientific Calculation and Simulation Software
  • analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Impact analysis, fluid-structure interaction analysis mechanism analysis "Dytran" recommended operating model

Impact analysis, fluid-structure interaction analysis mechanism analysis "Dytran" recommended operating model

Introducing a recommended model for the operation of solver products that provide strong coupling methods in one package!

"Dytran" analyzes phenomena including impact problems and interactions with fluids, supporting the resolution of complex engineering issues. By utilizing its unique coupling capabilities, it integrates nonlinear structural analysis of structural elements with unsteady flow analysis of fluids and solid materials undergoing extreme deformation, allowing for FSI analysis to be performed within a single software. We offer the recommended operational model for "Dytran," the 'CERVO-Grasta Type-IS2SR-Q-IS56,' so please feel free to make use of it. 【Features】 ■ HEXAGON Collaborative Model ＜Dytran＞ ■ Analyzes phenomena including impact problems and interactions with fluids ■ Supports the resolution of complex engineering issues ■ Performs FSI analysis within a single software *For more details, please refer to the related links or feel free to contact us.

  • Other PCs and OA equipment
  • analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Analysis of electronic components and materials using TEM.

Analysis of electronic components and materials using TEM.

TEM (Transmission Electron Microscope) meets a wide range of requirements for observing failure sites of electronic components, length measurements, elemental analysis, crystal structure analysis, and material evaluation.

TEM can perform not only high-magnification observation but also elemental analysis using EDS and EELS, as well as analysis of crystal structure, surface orientation, lattice constants, and more through electron diffraction.

  • Other analytical equipment
  • analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Electrical analysis services for power products

Electrical analysis services for power products

Design and development support considering the transmission line characteristics of power products.

Our company provides design support based on a wide range of experience in semiconductor application products, from LSI to power electronics. In the power electronics field, exemplified by inverters, which has gained attention in recent years, solving challenges during switching is a key point. We can offer comprehensive design support, including transmission line analysis using electromagnetic field analysis simulators, product evaluation, and verification of circuit simulations.

  • others
  • analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
BI analysis service "BI SCOPE"

BI analysis service "BI SCOPE"

Generate and analyze visually rich analytical data! Support rapid decision-making with intuitive visualization.

"BI SCOPE" is a BI analysis service that analyzes log data from an online ordering system using Amazon QuickSight and formulates the next proposals. It can visualize data from various perspectives such as by type of parts, by customer, by region, and by time zone, allowing for the extraction of various business insights. This enables the formulation of strategies tailored to customer needs. Additionally, by utilizing a cloud system, it visualizes user registration status and operational status in real-time, allowing for support and follow-up at the appropriate timing, thereby minimizing resource waste and business losses. 【Features】 ■ Real-time data visualization ■ Interactive dashboards ■ Extensive customization *For more details, please download the PDF or feel free to contact us.

  • Analysis and prediction system
  • analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to analysis

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.