Last Updated： Aggregation Period:May 06, 2026～Jun 02, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:May 06, 2026～Jun 02, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:May 06, 2026～Jun 02, 2026
This ranking is based on the number of page views on our site.
601～630 item / All 3012 items
Flame-retardant processing GF-8300 tarpaulin-type floor sheet
Flame-retardant processed floor sheet GF-8300 (m) tarpaulin-type floor sheet - Thickness: 0.52 mm × Width: 1370 mm × Length: 20 m - Color: Wasabi *Available in units of 1 m.
New product: Temperature memory sensor (with terminals) that detects abnormal temperatures before fire in various industrial equipment.
■Features of Temperature Memory Sensor (with terminals) 1. Capable of detecting abnormal temperatures inside various distribution boards, control panels, and operation panels (set temperature 80°C). 2. Capable of detecting abnormal temperatures inside industrial equipment and electrical devices. 3. Operates through physical action without the need for power supply or measuring instruments, directly sensing temperature and generating signals. 4. The operation allows for direct temperature detection through physical action, with a simple circuit configuration that can be produced at a low cost. 5. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 6. Capable of routinely monitoring various abnormal temperatures, ensuring reliable and safe maintenance management. 7. A product that integrates shape memory alloy with a terminal attached to the wire (set temperature 80°C). 8. A simple, easy-to-use product with good accuracy, featuring eco-friendly technology with zero standby power due to its switching function. 9. The shape memory alloy has permanent memory, is rust-free, and retains its state indefinitely once activated, allowing for long-term use. 10. A product that meets the performance standards of fixed temperature type detectors (Type 1, 120 seconds) as specified by fire safety regulations. 11. Non-resettable, allowing for confirmation after activation (once activated, it cannot be reactivated; the activated location must be removed and reconnected).
Just attach a sensor to the helmet! It can be used immediately without a smartphone or personal information, a mutual monitoring system among workers!
"Me-mamo" allows for easy and convenient visualization of heatstroke risk simply by attaching a sensor to your helmet. When an abnormality occurs, the notification lamp alerts not only the individual but also surrounding workers, enabling mutual monitoring among workers. 【Features】 ■ No forgetting to wear it, as it is measured with the helmet ■ Alerts those around you to your own danger ■ Informs others of any danger to your colleagues ■ Can be used immediately as it does not require a smartphone, server, or personal information *For more details, you can view it immediately by downloading the PDF.
The ion sensor is a sensor used to measure the ion generation status of various deionization devices.
The Ion Sensor A-984 is a sensor for measuring the ion generation state of various static elimination devices. The high technological capabilities of MEECH Ltd. (UK), which has been addressing static electricity issues for over 40 years, will be of assistance. By eliminating static electricity, it helps prevent product malfunctions and dust adhesion, thereby improving safety and quality. Dust and other contaminants that adhere due to static electricity compromise quality and increase costs. MEECH's devices remove contaminants and further prevent the re-adhesion of dirt after static elimination by removing static electricity from the products. For more details, please contact us or refer to the catalog.
The surface resistance meter A-990SRM is a device for measuring the resistance values of various material surfaces.
The surface resistance meter A-990SRM is a device for measuring the resistance values of various material surfaces. With over 40 years of experience in addressing static electricity issues, MEECH (UK) offers high technical expertise to assist you. By eliminating static electricity, it helps prevent product malfunctions and dust adhesion, thereby improving safety and quality. Dust and other contaminants that adhere due to static electricity can compromise quality and increase costs. MEECH's equipment removes dirt and also eliminates static electricity on products, preventing the re-adhesion of dirt after discharge. For more details, please contact us or refer to the catalog.
One-sided black cleanroom dust-free copy paper
This is black paper specifically for use in clean rooms.
EIA541 standard ESD protective bag - a bag that does not allow spark discharge to pass through internally.
ESD Static Electricity Destruction Prevention Shield Bag MK-CAB This bag prevents destruction caused by electrostatic discharge (ESD) from the outside. It adopts a two-layer structure of PET film with a deposited antistatic agent and antistatic PE. Both the inner and outer surfaces of the bag exhibit antistatic effects. Additionally, it is transparent, allowing for easy verification of the contents.
For those troubled by static electricity! Prevent dust and debris from adhering before pattern formation and resist curing.
The DS-880 is a product that provides static prevention effects by adding it to wash water in the washing process, with effects lasting for about two weeks. It prevents the adhesion of dust and debris before pattern formation and before resist curing. It is not subject to PRTR regulations, does not contain silicone compounds, and has a neutral pH. Additionally, the effects are further prolonged by heat treatment. 【Features】 ■ Effects last for about two weeks ■ Effects are further prolonged by heat treatment ■ Not subject to PRTR regulations ■ Does not contain silicone compounds ■ Neutral pH *For more details, please refer to the PDF document or feel free to contact us.
!["Insulated Crimp Sleeve" [Easily check the wire insertion status!]](https://image.www.ipros.com/public/product/image/9c2/2000392420/IPROS6288247727792551730.jpg?w=280&h=280)
Insulated crimp sleeves that allow for easy confirmation of wire insertion status! Made from non-halogen materials, they do not produce toxic halogen gases or corrosive gases when burned.
The "Insulated Crimp Sleeve" is compliant with RoHS 10 substances. It is made from non-halogen materials (polycarbonate), so it does not emit toxic halogen gases or corrosive gases during combustion. Additionally, the insertion status of the wire can be easily confirmed. A large window allows for double-checking. Furthermore, this product has excellent electrical insulation properties with a rated voltage of 600V. 【Features】 ■ Compliant with RoHS 10 substances ■ No toxic halogen gases or corrosive gases emitted during combustion ■ Easy confirmation of wire insertion status ■ Double-checking with a large window ■ Excellent electrical insulation properties *For more details, please request documentation or view the PDF data available for download.
Shut out water with a waterproof cap! Introducing IP57 pin terminals and crimp sleeves!
This product is a "waterproof pin terminal and waterproof crimp sleeve" with a waterproof cap type. The waterproof cap allows for the prevention of water ingress. The waterproof performance and safety code is IP57 (IEC529). Additionally, a "heat shrink type" is also available. 【Specifications (excerpt)】 ■ Rated voltage: 300V ■ Flame resistance: UL94V-2 ■ Insulator operating temperature range: -40℃ to +105℃ ■ Waterproof performance safety code: IP57 (IEC529) *For more details, please refer to the PDF document or feel free to contact us.
Reduce the burden on operators and significantly improve workability! Introducing connectors that are easy to remove.
The "Easy Lock Connector" not only speeds up and streamlines the wiring work of control components such as micro switches and relays but also minimizes the burden on the people engaged in that work as much as possible, while ensuring reliable and safe terminal attachment. By adopting a newly developed locking mechanism inside the connector, attachment to tab terminals can be done securely and smoothly. Additionally, we also offer connectors for "panel and small power switches" that can simultaneously attach multiple poles. 【Features】 ■ Newly developed locking mechanism ■ Soft touch attachment ■ Easy to remove *For more details, please refer to the PDF materials or feel free to contact us.
A wide variety of terminals and sleeves for insulating caps, copper wire, nichrome wire, and nickel wire are available!
This catalog provides a comprehensive introduction to the "Bare Crimp Terminals and Crimp Sleeves" handled by Nichifu Corporation. It features a rich lineup including "Bare Crimp Terminals (R type) round shape" for copper wires, as well as "Bare Crimp Terminals (CB type)" for low-voltage switches, "Insulation Caps (VC)," and "Heat-Resistant Terminals and Sleeves." [Featured Products (Excerpt)] ■ Bare Crimp Terminals for Copper Wires (R type) round shape ■ Bare Crimp Terminals for Copper Wires ■ Bare Crimp Terminals for Copper Wires (RD type) round shape ■ Bare Crimp Terminals for Copper Wires square shape with 2 holes (NTT type) ■ Bare Crimp Terminals for Low-Voltage Switches (CB type) *For more details, please refer to the PDF document or feel free to contact us.
Smooth confirmation of the wire insertion status through the large window. Excellent electrical insulation properties, compliant with ROHS 10 substances.
The "Environmentally Friendly Insulated Crimp Sleeve" is a type B sleeve that connects and crimps wires from both directions. It features a transparent color with two windows, allowing for easy confirmation of the wire insertion state. Made from non-halogen materials (polycarbonate), it does not produce toxic halogen gases or corrosive gases during combustion. 【Features】 ■ Complies with ROHS 10 substances ■ Excellent electrical insulation with a rated voltage of 600V ■ Usable at temperatures ranging from -40℃ to 125℃ ■ Easy confirmation of the wire insertion state *For more details, please refer to the documentation. Feel free to contact us with any inquiries.
The new cylindrical shape 'QLX L3' from the Nichifu QLX series has arrived! It is compatible with wires of Φ2.0 mm, Φ2.6 mm single wire, and IV 5.5 SQ stranded wire.
The Nichifu plug-in type wire connector 'QLX L3' features a new cylindrical shape that further enhances visibility for "visual confirmation" of the wire insertion state compared to conventional products! Additionally, thanks to its reliable two-point contact spring structure, you can safely and securely insert the connector. It is compatible with wire sizes of Φ2.0 mm, Φ2.6 mm single wire, and IV5.5SQ stranded wire. The rated capacity is 40A! This connector has been developed with an easy-to-handle design, even for those with less experience. 【Features】 ■ New shape that makes visual confirmation of wire insertion easier than conventional products ■ Two-point contact spring structure ■ Compatible with Φ2.0 mm, Φ2.6 mm single wire, and IV5.5SQ stranded wire ■ Rated for 40A *For more details, please refer to the PDF document or feel free to contact us.
Waterproof crimp sleeve using a special two-layer structure heat shrink tube for the insulating cover part.
Introducing the "Waterproof Crimp Sleeve (SB)" handled by Nichifu Corporation. A special two-layer structure (high-density polyethylene / polyolefin-based adhesive) heat shrink tube is used for the insulating coating part. By heating and shrinking with a heat gun after crimping, the tube and wire insulation are bonded, providing waterproof and dustproof effects. 【Specifications (excerpt)】 ■ Rated voltage: 600V ■ Maximum operating temperature of the insulator: 105℃ ■ Can be used with most wires, but bonding effects cannot be expected with insulation materials such as silicone rubber, glass braided wire, Teflon (FET, TFE, etc.), and fluororubber. *For more details, please refer to the PDF document or feel free to contact us.
A new series of miniaturized Easy Lock connectors has arrived! It reduces the burden on operators and significantly improves work efficiency.
The new series "Easy Lock Connector" not only speeds up and streamlines the wiring work of control components but also minimizes the burden on the people engaged in that work as much as possible, while ensuring reliable and safe terminal attachment. By adopting a new structure for the housing and terminals, this product has successfully achieved miniaturization. The Easy Lock mechanism allows for maintaining the connection even when only pulling the wire, and it can be easily pulled out by holding the housing. Due to its compact design, it is compatible with small switches that previously required soldering, allowing for easy wiring without the need for soldering. 【Features】 ■ Easy attachment and detachment with the Easy Lock structure ■ Miniaturization with the new connector structure ■ Simplification of wiring work *For more details, please refer to the PDF document or feel free to contact us.
Special price applicable! We offer products such as "NA10," which improves crimping quality, and "NA20," which enhances work speed and efficiency. *Video available.
We are pleased to announce that Nichifu is applying a special campaign price for the crimping machines 'NA10/NA20/NCA100/NCM100'. The 'NA10' allows for vertical crimping due to the independent upper and lower dies, which improves crimping quality. The 'NA20' adopts air-driven operation, enhancing the speed and efficiency of work. Additionally, the 'NCA100/NCM100' improves the efficiency of crimping work by using our ICT chain-type terminals, and the automatic crimping eliminates variations in crimping shapes caused by the operator. 【Campaign Details】 ■Benefits: Application of campaign special price *For more details, please contact your purchasing agent (trading company). *For more information, please refer to the PDF document or feel free to contact us.
Introduction of a disconnect connector for multi-package air conditioners that can reduce construction time and costs by over 50%, compliant with Internal Regulations 2022 Edition 3302-2!
We would like to introduce the "Plug Joint Connector," which can be used for disconnection devices for multi-package air conditioners. The Plug Joint Connector can be used as a disconnection device in place of an outlet during the electrical wiring of multi-package air conditioners by combining a plug connector and a terminal block. 【Features】 ■ Complies with the 2022 version of the internal wiring regulations 3302-2 (suitable for disconnection devices) ■ Reduces installation time and costs by over 50% compared to conventional outlets! ■ No need for a junction box ■ Allows for visual confirmation of the wire insertion state, and adopts a double spring structure for the contact area of the wires ■ Easily enables changes from straight connections to branch connections *For more details, please download the PDF or feel free to contact us.
GNSS signals are recaptured in a shorter time! GNSS+IMU hybrid sensor equipped with a high-precision FOG gyro.
The "CNS-5000" is a GNSS+IMU hybrid sensor equipped with an FOB-based IMU, achieving excellent stability and reliability. Thanks to deep coupling technology, it continuously outputs stable position, velocity, and attitude data even in challenging environments where GNSS signal reception is difficult or interrupted. Additionally, we also offer the "1725/1750/1775 IMU," which incorporates three MEMS accelerometers. 【Features】 ■ Equipped with an FOB-based IMU, achieving excellent stability and reliability ■ Continuous high-precision positioning possible through dead reckoning even when GNSS signals are interrupted ■ Outputs measurement data for position, velocity, and attitude at a data update rate of 100Hz ■ Supports RTK positioning, L-band PPP services, and SBAS ■ By utilizing IMU data, GNSS signals can be reacquired in one-fifth of the conventional time *For more details, please refer to the PDF document or feel free to contact us.
Introducing the torque sensor. It is a rotary torque sensor. It is an amplifier-integrated torque sensor. The output is ±5V.
Introducing the built-in amplifier torque sensor. This is a torque sensor made by the German company Lorenz. The accuracy is ± 0.25% FS (full scale). When torque is applied in a clockwise direction, it outputs a positive signal
This is an introduction to a displacement sensor. A wire is wrapped around a potentiometer. It is a wire-type displacement sensor.
A wire is wound around the potentiometer. It is a sensor that can measure the distance of movement as the wire is pulled out. Due to the grooved drum, it has excellent reproducibility.
微少力センサー（微少力ロードセル）です。ビーム型ロードセルです。微少な力や変位を測定。
微少力ロードセル（微少力センサー）です。ビーム型ロードセルです。 力や変位を測定 ・定格容量 :113 gf ～ 18 Kgf ・横幅: 6.4mm 熱的に整合した完全にアクティブなフルブリッジ ゲージにより、最適な温度をトラッキング。 頻繁な低負荷測定が必要な場合は、LCLシリーズ細型ビームロードセルが最適です。LCLシリーズは、医療機器、家電製品、プロセス制御、ロボット、自動車、その他の頻繁な使用における多くの異なる変数を測定するために設計されています。特別に開発された一体型抵抗器ひずみゲージは、バランス、補償、導電それぞれの素子を含み、ビーム状の薄板構造により、優れた安定性と信頼性を誇ります。
Submersible Water Level Sensor Submersible Water Level Gauge Diameter 20mm Slim Measurement Range: 0-3 to 0-100mWG 9600 Series
The immersion-type water level sensor, immersion-type water level gauge, and pressure sensor series 9600 meet the strict conditions for groundwater monitoring with ultimate performance. Even when the medium experiences temperature changes in the range of -5°C to +45°C, the pressure sensor series 9600 features built-in water density compensation to provide true level readings. Made from 318 stainless steel for the wetted parts, it offers excellent corrosion resistance. The SDI-12 communication type minimizes current consumption when using battery power and allows for reduced installation time or readjustment of the installed device without removing it from the medium using a cable-connected PC or mobile interface.
Flow Sensor Turbine Type for Liquids Flow Sensor FPR200 Series 4-20mA, Pulse Output or Relay Output
Flow Sensor Turbine Type for Liquids Flow Sensor FPR200 Series Liquid Flow Transmitter 4-20mA, Pulse Output or Relay Output - 2% FS Accuracy - 1.9 to 189.3 LPM Range - Visual Display of Flow Pulses - 4-20mA, Pulse or Relay Output The FPR-200 series flow sensor integrates a precise digital-analog conversion circuit, encapsulated and sealed within the body of the flow sensor, with robust tangential turbine technology. This flow sensor is suitable for flow rate measurement in cooling circuit HVAC systems and batch operations.
Flow sensor RFI series, visual confirmation only, manufactured by Gems Sensors, orange rotor.
Flow Sensor RFI Series Visual Confirmation Only RF2500 Series Rotor Flow Sensor RFI Type Visual Confirmation of Flow Manufactured by Gems Sensors There are also types of flow sensors that provide output (RFO Series) The easily visible orange rotor rotates due to the flow of liquids such as water and light oil, allowing for flow confirmation. Additionally, the speed of rotation can be used to estimate the flow rate. The front lens can be removed for cleaning. Flow Sensor Applications - Plastic Injection Molding Machines - Visual Confirmation of Flow in Heat Exchangers - OEM Pricing with OEM Quality - Vivid Visual Confirmation - Flow Rate Range of 0.4 to 225 L/min The RF2500 Series Flow Sensor is constructed with a stable polypropylene or brass and stainless steel body, rotor, durable single structure, ceramic shaft, and good sealing. This makes it durable against a wide range of chemicals under various temperatures and pressures. The flow rate range is 0.4 to 75.7 L/min for the polypropylene body, and 0.4 to 225 L/min for the brass and stainless steel bodies.
Compression load cell / compression force sensor Model K-450 Protection level IP67 Special version available upon request.
Compression Load Cell / Compression Force Sensor Model K-450: Range 0 - 1 to 0 - 1000 kN Protection Rating: IP67 Product Features: • Measurement of static and dynamic forces • Easy handling and assembly • Stainless steel construction • Protection level IP67 • Long-term stability • Special versions available upon request Applications • Equipment engineering • Fully automated machining centers • Measurement and control devices • Material testing machines • Tool engineering • Special mechanical engineering
Compression force sensor (load cell) Model K-18 Rated range 0-5 kN to 0-5000 kN Protection class IP67 with through hole
Compression Force Sensor (Load Cell) Model K-18 Rated Range 0-5 kN to 0-5000 kN Protection Class IP67 With through hole Temperature Range: -30°C to +80°C Performance Features: • Compression force sensor for pressure input investigation • Extended temperature range (optional) -40 °C to 150 °C
Collaborative robot torque sensor, torque sensor for robot joints, high precision, CAN output - standard, low price range.
Torque sensor for robot joints - High precision - CAN output - standard Other outputs available as an option - Low price range - Torque sensor for industrial robots - Torque sensor for collaborative robots Please feel free to consult us about your required specifications and how you will use it.
Joint box according to the Electrical Appliance and Material Safety Law
You can easily wire the F cable by simply connecting the plug connector to the terminal block.
We introduce iron and stainless steel fuse holders, as well as rod-shaped and plate-shaped fuses.
Fukagawa Co., Ltd. handles "damper parts." We offer a lineup that includes "long (for round dampers with a diameter of 225mm or more and for square dampers)" and "short (for round dampers with a diameter of 100mm to 200mm)" fuse holders, as well as "rod-type fuses" and "plate-type fuses." Please choose according to the damper you are using. 【Lineup】 ■ Fuse Holders ・Long (for round dampers with a diameter of 225mm or more and for square dampers) ・Short (for round dampers with a diameter of 100mm to 200mm) ■ Fuses ・Rod-type fuses ・Plate-type fuses *For more details, please refer to the PDF document or feel free to contact us.
