Custom-made support for ultrasonic oscillation control probes.

Ultrasonic plating treatment technology using fine bubbles and megahertz ultrasonic waves.

The Ultrasonic System Research Institute has been developing ultrasonic plating treatment technology utilizing fine bubbles and megahertz ultrasound in collaboration with Japan Barrel Industry Co., Ltd. since 2015. Note: As of August 2024, it is continuously evolving based on good results into various application technologies. 1) Cleaning, processing, welding, plating... surface treatment... 2) Chemical reactions, liquid homogenization, stirring... 3) Inspection, evaluation... 4) Optimization control of ultrasound and fine bubbles tailored to specific purposes. Currently, in collaboration with Japan Barrel Industry Co., Ltd., we are developing application technologies utilizing ultrasound and fine bubbles for iron plating treatment (iron powder, amorphous, megahertz ultrasound...). If you are interested, please contact us via email. Ultrasonic propagation characteristics: 1) Detection of vibration modes (changes in autocorrelation) 2) Detection of nonlinear phenomena (changes in bispectrum) 3) Detection of response characteristics (analysis of impulse response characteristics) 4) Detection of interactions (analysis of power contribution rates)

• Non-destructive testing
• Other measuring instruments
• others

Application technology for ultrasonic sound pressure measurement, analysis, control, and evaluation systems.

The Ultrasonic System Research Institute has developed technology to control resonance and nonlinear phenomena in the propagation state of surface acoustic waves through the control of ultrasonic oscillation, using a combination of low and high frequencies. By utilizing new ultrasonic propagation materials (such as stainless steel wire and titanium straws), efficient ultrasonic applications tailored to specific purposes become possible. Through the measurement and analysis of sound pressure data from ultrasonic testers, this system technology controls the complex changes in surface acoustic waves according to the intended use. Practically, by using multiple (two types of) ultrasonic probes to generate multiple (two types of) oscillations (sweep oscillation and pulse oscillation), complex vibration phenomena (original nonlinear resonance phenomena) are created, achieving high-frequency propagation states at high sound pressure or low-frequency propagation states tailored to the desired natural frequency. In particular, by optimizing the vibration characteristics of tanks and pumps with megahertz ultrasound, efficient ultrasonic control is realized (propagating through 3000 liters of cleaning solution at a 30W output).

• pump
• Septic tank equipment
• others

Application of a new surface inspection technology using megahertz ultrasonic oscillation.

The Ultrasonic System Research Institute has developed a new surface inspection technology using megahertz ultrasonic oscillation based on its track record of analyzing ultrasonic data propagating on the surface of target objects. Using this technology, we will evaluate the ultrasonic propagation characteristics of the items to be cleaned and compile a report proposing effective control, frequency, and output levels for ultrasonic cleaning machines. This method applies measurement and analysis techniques for "sound pressure and vibration" by controlling the oscillation of the ultrasonic probe. By using an original ultrasonic probe tailored to the vibration modes propagating on the surface of the target object, we can confirm the propagation state of ultrasonic waves in narrow grooves and edge areas. Furthermore, through original oscillation control, we will measure and analyze the dynamic characteristics of low-frequency propagation properties and the generation state of harmonics due to nonlinearity. This is an application of the new ultrasonic oscillation control technology. By utilizing nonlinear phenomena related to megahertz ultrasonic propagation states that match the acoustic characteristics of the target object, it is possible to detect the unique acoustic properties of the object.

• Non-destructive testing
• Other analytical equipment
• others

Technology to control low-frequency resonance phenomena and high-frequency nonlinear phenomena.

The Ultrasonic System Research Institute has developed technology to manufacture ultrasonic probes that can control ultrasonic propagation states from 500 Hz to over 500 MHz, tailored to specific applications. Ultrasonic Probe: Overview Specifications Measurement Range: 0.01 Hz to 200 MHz Oscillation Range: 1.0 kHz to 25 MHz Propagation Range: 0.5 kHz to over 900 MHz (confirmed through acoustic pressure data analysis) Materials: Stainless steel, LCP resin, silicon, Teflon, glass, etc. Oscillation Equipment: Example - Function Generator By understanding the acoustic properties of metals, resins, glass, etc., and through oscillation control, we achieve propagation states tailored to specific purposes regarding acoustic pressure levels, frequencies, and dynamic characteristics. This is a new foundational technology for precision cleaning, processing, stirring, and inspection based on measurement, analysis, and evaluation techniques for ultrasonic propagation states. By utilizing the acoustic properties of various materials, ultrasonic stimulation can be controlled for structures and machine tools weighing several tons, even in a 3000-liter water tank, with ultrasonic output below 20 W. It was developed as an application method for nonlinear phenomena through an engineering (experimental and technical) perspective on elastic waves and an abstract algebraic ultrasonic model.

• Water Treatment
• Other measuring instruments
• others

Development technology for dynamic control systems using ultrasound.

The Ultrasonic System Research Institute has developed a new nonlinear sweep oscillation control technology for ultrasound, utilizing the nonlinear vibration phenomena of surface elastic waves. Regarding complex vibration states: 1) Linear phenomena and nonlinear phenomena 2) Interactions and the acoustic characteristics of various components 3) Sound, ultrasound, and surface elastic waves 4) Low frequency and high frequency (harmonics and subharmonics) 5) Oscillation waveform and output balance 6) Oscillation control and resonance phenomena ... Based on the above, we optimize a new evaluation method for surface elastic waves using a statistical mathematical model based on sound pressure measurement data. Ultrasonic cleaning, processing, stirring, ... surface inspection, ... nanotechnology, ... applied research ... various responses are possible. Propagation characteristics of ultrasound: 1) Detection of vibration modes (changes in autocorrelation) 2) Detection of nonlinear phenomena (changes in bispectrum) 3) Detection of response characteristics (analysis of impulse response characteristics) 4) Detection of interactions (analysis of power contribution rates) Note: "R" is a free statistical processing language and environment. autcor: autocorrelation analysis function bispec: bispectrum analysis function mulmar: impulse response analysis function

• Water Treatment
• Analysis and prediction system
• others

An ultrasonic system that easily controls the oscillation of megahertz ultrasound—applying technology to evaluate the propagation characteristics of ultrasonic probes.

The Ultrasonic System Research Institute has developed a technology to control the nonlinear phenomena of surface elastic waves (ultrasonic vibrations) that propagate through the target object, using an original ultrasonic system (sound pressure measurement analysis, oscillation control). **Technology for Controlling Nonlinear Ultrasonic Vibration Phenomena** 1) Control setting technology that adjusts the oscillation output, waveform, and variations of the oscillation control using a function generator, tailored to the acoustic characteristics of the target object. 2) Manufacturing technology for an ultrasonic oscillation control probe that enables control of changes in ultrasonic oscillation voltage, including adjustments to the oscillation surface. 3) Manufacturing technology for an ultrasonic measurement probe that allows for the measurement of changes in ultrasonic vibrations at 100 megahertz, including adjustments to the oscillation surface. 4) Optimization technology for sweep oscillation conditions. Using the above technologies, we control (optimize) the propagation state of ultrasonic waves according to specific objectives. Note: The dynamic control of ultrasonic waves is performed based on the analysis and evaluation of sound pressure data related to nonlinear phenomena, considering the interaction between the acoustic characteristics of the target object and ultrasonic oscillation control. (Sound pressure measurement, analysis, confirmation, and evaluation are conducted using an ultrasonic tester.)

• Analysis and prediction system
• Other measuring instruments
• others

-- Ultrasonic System (Sound Pressure Measurement Analysis, Oscillation Control) --

The Ultrasonic System Research Institute manufactures and sells a system that combines the "Ultrasonic Tester NA (recommended type)," which allows for easy measurement and analysis of ultrasound, and the "Ultrasonic Oscillation System (20 MHz)," which enables easy control of ultrasonic oscillation. We propose system configurations (custom-made ultrasonic probes) tailored to the intended use (price and performance: cleaning, processing, stirring, inspection, etc.). Original Products: System Overview (Standard System) - Ultrasonic System (Sound Pressure Measurement and Analysis, Oscillation Control 10 MHz Type) - Ultrasonic Tester NA 10 MHz Type - Oscillation System 20 MHz Type Price: 281,050 yen (including tax: 10% consumption tax)

• Non-destructive testing
• Vibration and Sound Level Meter
• others

Ultrasonic probe capable of controlling ultrasonic propagation conditions above 900 MHz.

The Ultrasonic System Research Institute offers custom-made ultrasonic probes capable of controlling ultrasonic propagation states above 900 MHz. We manufacture and develop original ultrasonic oscillation control probes tailored to your objectives. Ultrasonic Probe: General Specifications - Measurement Range: 0.01 Hz to 200 MHz - Oscillation Range: 0.5 kHz to 25 MHz - Propagation Range: 0.5 kHz to over 900 MHz (confirmed and evaluated through analysis) - Materials: Stainless steel, LCP resin, silicone, Teflon, glass, etc. - Oscillation Equipment: Example - Function Generator By understanding the acoustic properties of metals, resins, glass, etc., we achieve propagation states tailored to your needs regarding sound pressure level, frequency, and dynamic characteristics through oscillation control. This is a new foundational technology for precision cleaning, processing, stirring, inspection, etc., based on measurement, analysis, and evaluation techniques for ultrasonic propagation states. By utilizing the acoustic properties (surface elastic waves) of various materials (such as glass containers), ultrasonic stimulation to structures and machine tools weighing several tons can be controlled with ultrasonic output below 20 W, even in a 5000-liter water tank.

• Non-destructive testing
• Other analytical equipment
• others

Technology for evaluating the dynamic characteristics of ultrasonic probes.

The Ultrasonic System Research Institute has developed manufacturing and evaluation technology for ultrasonic probes that can control ultrasonic propagation states from 500 Hz to 900 MHz, based on the classification of ultrasonic propagation characteristics (acoustic characteristics). We can manufacture and develop original ultrasonic oscillation control probes tailored to specific purposes. This technology is available for consulting. If you are interested, please contact us via email. Propagation characteristics of ultrasonic probes: 1) Detection of vibration modes (changes in autocorrelation) 2) Detection of nonlinear phenomena (changes in bispectrum) 3) Detection of response characteristics (analysis of impulse response characteristics) 4) Detection of interactions (interaction between oscillation voltage and received voltage: analysis of power contribution rate) Note: "R" is a free statistical processing language and environment. - autocor: autocorrelation analysis function - bispec: bispectrum analysis function - mulmar: impulse response analysis function - mulnos: power contribution rate analysis function

• Non-destructive testing
• Vibration and Sound Level Meter
• Scientific Calculation and Simulation Software

Development technology for ultrasonic probes and ultrasonic oscillation control systems - Aging treatment of piezoelectric elements.

The Ultrasonic System Research Institute has developed a technology to adjust the ultrasonic propagation characteristics of ultrasonic elements (piezoelectric elements) based on measurement, analysis, and evaluation results regarding the propagation state of ultrasound, utilizing ultrasonic systems (sound pressure measurement, oscillation control). To utilize the surface acoustic waves of ultrasonic elements (piezoelectric elements) according to specific purposes, special surface treatments are performed on the element surface. It allows for adjustments to the sound pressure level and frequency range of the propagating ultrasound. By realizing dynamic ultrasonic propagation control through the combination of ultrasound (oscillation control) and surface acoustic waves, it has evolved into an adjustment technology based on the characteristics derived from the analysis of sound pressure data. The key point is the optimization of oscillation conditions (waveform, output, frequency, variations, etc.) that enables efficient control of nonlinear phenomena caused by surface acoustic waves. As specific technologies mentioned above, we provide consulting services for system technologies that control nonlinear phenomena (bi-spectral) resulting from the interaction of ultrasound with tanks and tools, tailored to specific purposes (cleaning, stirring, processing, welding, surface treatment, stress relief treatment, inspection, etc.).

• Analysis and prediction system
• Scientific Calculation and Simulation Software
• others

Ultrasonic oscillation control probe enabling control of resonance phenomena and nonlinear phenomena - Surface modification technology (relaxation of surface residual stress) through nonlinear oscillation control.

The Ultrasonic System Research Institute provides consulting services for the manufacturing and development technology of an ultrasonic probe and sound pressure measurement analysis system that can measure ultrasonic propagation conditions from 0.1 Hz to 900 MHz. Ultrasonic sound pressure measurement analysis system (Ultrasonic tester: standard system) 1. Contents - One dedicated probe for measuring sound pressure of ultrasonic cleaners - One general-purpose ultrasonic measurement probe - One oscilloscope set - One set of analysis software, manuals, and various installation sets 2. Features (for standard specifications) * Measurement (analysis) frequency range Specification: from 0.1 Hz to 10 MHz * Ultrasonic oscillation Specification: from 1 Hz to 100 kHz * Capable of measuring surface vibrations * Continuous measurement for 24 hours is possible * Simultaneous measurement of any two points * Measurement results displayed in graphs * Analysis software for time-series data included This is a measurement system using ultrasonic probes. The ultrasonic probe is attached to the target object for oscillation and measurement. The measured data is analyzed considering position and state, as well as elastic waves, to detect various acoustic performances.

• Non-destructive testing
• Vibration and Sound Level Meter
• Scientific Calculation and Simulation Software

Ultrasonic probe-based sweep oscillation system - a technology for controlling low-frequency resonance phenomena and high-frequency nonlinear phenomena.

The Ultrasonic System Research Institute has developed a new control technology for ultrasonic probes using original technology. This is an application technology for measurement systems using the new ultrasonic probe. We provide consulting services for the development, manufacturing, and control methods of dedicated ultrasonic probes tailored to specific purposes. Regarding the characteristics of piezoelectric elements, we develop and manufacture original ultrasonic probes based on analyses that consider elastic wave propagation and various vibration states (modes). For measurements, the probes can be connected to an oscilloscope for use. For oscillation, they can be connected to a function generator. By performing feedback analysis of sound pressure measurement data, it becomes possible to quantify and evaluate nonlinear ultrasonic phenomena (acoustic streaming) and cavitation effects. The ultrasonic probes are "made-to-order" based on the confirmed intended use.

• Non-destructive testing
• Other analytical equipment
• others

Are you making progress on measures for the "2024 Problem"? The management of drivers' working hours is becoming stricter, and in the logistics field, reducing "waiting time for loading" has become an urgent issue. To address this challenge, our company, Hotron, proposes the "Vehicle Detection Ultrasonic Sensor 'HM-UX2'," which instantly grasps the availability of loading bays. The 'HM-UX2' contributes to the resolution of waiting times by accurately understanding the availability status, reducing unnecessary waiting and queuing, and shortening waiting times, thereby alleviating the burden on drivers! By replacing the "eyes" of your loading bay management with this high-precision sensor, why not start taking measures against the "2024 Problem"? Take a look at the product features: "Can it accurately detect availability?" "Can we really use it in our company?" "I just want to know the cost, even if it's an estimate." If you have any questions or requests, please feel free to consult us first.

We sincerely apologize for the inconvenience, but we will be closed for summer vacation during the following period. Closure period: August 9 (Saturday) to August 17 (Sunday), 2025 Inquiries received during this period will be addressed sequentially starting from August 18 (Monday). We appreciate your understanding and cooperation.

Thank you very much for visiting our booth at the "High-Performance Materials Week [Osaka] 13th High-Performance Plastics Exhibition." Thanks to you, we had many visitors and were able to conclude the event successfully. In addition to the "PPLB-445" displayed on the day, we have a variety of products available. For those who were unable to measure samples at the venue, we offer a trial measurement service. Furthermore, for those who would like to know more about our products and services, we also accept online meetings. We welcome inquiries from those who attended as well as those who could not make it this time due to scheduling conflicts. Please feel free to contact us.

Aioi System is pleased to announce the release of the low-power wireless display "NW2991-JP," which achieves long battery life. This product supports 920MHz band wireless communication and can be operated in conjunction with wired displays. It can be easily integrated into existing systems by simply adding a master unit. With a high-speed response time of under one second and a variety of display functions for text and barcodes, it supports a wide range of applications. ▼ For more details, please see the press release linked below ▼ ■ Main Features - Maintenance-free design with a battery life of one year (low power consumption) - Compatible with mixed operation with wired displays - High-speed response (under one second) and diverse display formats - Stable communication in the 920MHz band ■ You can see the actual product at the exhibition This product will be displayed at the TOPPAN booth during the International Logistics Comprehensive Exhibition 2025, 4th INNOVATION EXPO. We invite you to visit the venue, see the actual product, and experience its performance. Dates: September 10 (Wed) - 12 (Fri), 2025 Venue: Tokyo Big Sight (Halls 4-8) Booth No: 5-907 (TOPPAN booth) Exhibition official website ▶ linked below We sincerely look forward to your visit.

Thank you very much for visiting our booth at the "Monozukuri World (Measurement, Inspection, and Sensor Exhibition) 2025." Thanks to you, we had many visitors, and the event concluded successfully. In addition to the "PPLB-445" showcased on the day, we have a variety of products available. For those who were unable to conduct sample measurements at the venue, we offer a trial measurement service. Furthermore, for those who would like to learn more about our products and services, we also accept online meetings. We welcome inquiries from those who attended, as well as those who were unable to come this time due to scheduling conflicts. Please feel free to reach out to us.