ダコタ・ジャパン List of Products and Services

The KDT-10A is a device for reading the diameter of Brinell indentations. It automatically reads the indentation diameter and displays the Brinell hardness. Compared to visual readings, it enables accurate and fast measurements without variation. It can automatically save measurement results such as Brinell hardness, diameter (length, width, average), and images, and it also supports outputting test results to Excel. It is possible to re-evaluate (re-measure) based on the saved images. The camera head is very lightweight at 220g, allowing for stress-free measurements. The standard type supports a 10mm indenter, with options available for 5mm and 2.5mm indenters. ■Features - Instantly measures the average diameter of the indentation and displays the Brinell hardness - Automatically saves test results, images, and test conditions - Convenient manual adjustment function - Lightweight camera head weighing approximately 220g *For more details, please refer to the PDF document or contact us.

• Other measuring instruments
• Structural Survey

The QH-7 series is a hybrid hardness tester that supports hardness measurement using both UCI (Ultrasonic Contact Impedance) and rebound (Leeb) methods. By utilizing the advantages of both UCI and rebound, it enables hardness measurement of various metals. It has a wide measurement range and can measure soft metals that cannot be measured by other devices. Furthermore, it offers highly reliable measurements with very little variation. The UCI hardness measurement, which is often difficult and prone to differences among inspectors, can be performed confidently even by beginners, thanks to the software support features. ■Features - Wider measurement range and higher precision compared to general UCI and rebound hardness testers - Automatically detects and corrects the orientation (impact angle) of the impact device - Rich display functions including maximum, minimum, standard deviation, range, and graph display - Robust metal body designed to withstand harsh environments *For more details, please refer to the PDF document or contact us.

• others
• Other measuring instruments
• Structural Survey

The PMX4-DL is the most powerful ultrasonic thickness gauge developed for high-damping materials. It measures the thickness of materials such as glass fiber and carbon fiber reinforced plastics (GFRP and CFRP), rubber, high-density polyethylene (HDPE), and cast metals. It is also capable of measuring the thickness of composite materials over 100mm. It features a built-in 8GB data logger, allowing measurement data to be easily transferred and displayed on a PC using the included USB cable. It also supports power supply from mobile batteries or USB connectors on computers. ■ Features - A powerful ultrasonic thickness gauge for high-damping materials (GFRP, CFRP, rubber, etc.) - Capable of measuring the thickness of composite materials over 100mm - Newly developed low-frequency transducer with excellent penetration at 500kHz - Optimized filter for measuring high-damping materials - Large-capacity data storage (8GB) and USB power supply *For more details, please refer to the PDF document or contact us.

• Non-destructive testing

The ZX1 is an entry-level ultrasonic thickness gauge. It easily measures the thickness of areas that are difficult to measure with calipers or micrometers. Despite being an entry-level model, it achieves high measurement accuracy and an overwhelming measurement range of 0.63mm to 800mm, revolutionizing the concept of entry-level ultrasonic thickness gauges. With excellent durability, IP65 dust and drip protection, and a 5-year warranty, it can be used with confidence in any environment. ■Features - An overwhelming measurement range of 0.63mm to 800mm (equivalent to steel) - High-speed updates at 10 times per second, compared to the typical 4 times per second for general ultrasonic thickness gauges - A size optimized for Japanese users, with a lightweight design for comfortable long-term inspections - Three-level adjustable backlight - IP65 dust and drip protection and a 5-year warranty *For more details, please refer to the PDF document or contact us.

• Non-destructive testing

The ZX3 / ZX5-DL is a highly versatile mid-range ultrasonic thickness gauge that meets a wide range of thickness measurement needs. With a measurement range of 0.63 to 1,000 mm, it features automatic zero adjustment, single and dual point calibration, five levels of sensitivity adjustment, and excellent basic performance, along with a variety of functions. In scan mode, it performs high-speed scanning at 100 times per second (normally 10 times per second) and displays the minimum thickness when the transducer is lifted. In addition to these features, the ZX5-DL includes an alarm, differential thickness measurement, sound velocity measurement mode, USB power supply, and a data logger (capable of storing 10,000 measurement values). It also supports remote control, allowing settings to be changed and measurement values to be retrieved via commands from external devices. ■ Features - Overwhelming measurement range of 0.63 mm to 800 mm (equivalent to steel) - Five levels of sensitivity adjustment - Screen updates at 10 times per second, and ultra-fast measurements at 100 times per second in scan mode - Optimally sized for Japanese users, lightweight design for comfortable long-term inspections - IP65 dust and drip-proof performance with a 5-year warranty *For more details, please refer to the PDF document or contact us.

• Non-destructive testing

The ZX6-DL is an ultrasonic thickness gauge equipped with an echo-echo mode (through-paint) that measures the thickness of the base material (substrate) without removing the paint. It has expanded the measurement range from the conventional model MMX-6, achieving a top-class measurement range of 2.5 to 50 mm in echo-echo mode and 0.63 to 1,000 mm in pulse-echo mode. It includes all the features of the ZX5-DL, such as scan mode (high-speed measurement), alarms, sensitivity adjustment, USB power supply, and a data logger (storing 10,000 measurement values), demonstrating high performance in various environments and applications as a high-grade model in the ZX series. ■Features - Echo-echo mode for measuring the thickness of the base material (substrate) without removing the paint - Measurement range of pulse-echo 0.63 to 1,000 mm and echo-echo 2.5 to 50 mm - Five levels of sensitivity adjustment - Screen refresh rate of 10 times per second, and ultra-fast measurement of 100 times per second in scan mode - Compatible with mobile batteries, USB chargers, and USB power from PCs - IP65 dustproof and drip-proof performance with a 5-year warranty *For more details, please refer to the PDF document or contact us.

• Non-destructive testing

The MX2-DL is a high-end model of an ultrasonic thickness gauge equipped with an A-scope. It allows for measurements while confirming echoes, even in inspection targets prone to noise, such as cast iron, FRP, and severely corroded piping, ensuring reliable detection of the bottom echo. The measurement range is from 0.63 to 1,000 mm in pulse-echo mode and from 2.5 to 50 mm in echo-echo mode (measuring the base material thickness without removing the coating). It features A/B scope display, independent dual gates, alarm mode, scan mode, and USB power supply, among various other functions. It has an 8GB data logger built-in, allowing for easy transfer and display of measurement data on a PC. ■ Features - A-scope display showing ultrasonic waveforms and B-scope display for cross-sectional images - An astonishing measurement range of 0.63 mm to 1,000 mm (steel equivalent) - Echo-echo mode for measuring base material thickness without removing the coating - Screen refresh rate of 25 times per second, with ultra-fast measurements of 250 times per second in scan mode - Multi-stage sensitivity adjustment function - USB power supply capability - IP65 dust and drip-proof performance and a 2-year warranty *For more details, please refer to the PDF document or contact us.

• Non-destructive testing

The CMX1-DL is a groundbreaking hybrid ultrasonic thickness gauge that can simultaneously measure both the thickness of the substrate (base material) and the film thickness. In measuring coatings, there is no need to measure separately with a film thickness gauge and an ultrasonic thickness gauge; the CMX1-DL allows for simultaneous measurement of the coating and substrate thickness. It features a measurement range of 0.63 to 1,000 mm (1 m), five levels of sensitivity adjustment, a scan mode (high-speed sampling and minimum/maximum hold function), USB power supply, and advanced functions such as multi-echo and temperature compensation. It has a built-in 8GB data logger, allowing measurement data to be easily transferred and displayed on a PC using the included software. It also includes a convenient capture (print screen) function to save the display as an image. ■ Features - Revolutionary ultrasonic thickness gauge capable of measuring film thickness - Astonishing measurement range of 0.63 mm to 1,000 mm (steel equivalent) - High-precision thickness measurement with multi-echo mode - Screen update at 25 times per second, and ultra-fast measurement at 250 times per second in scan mode - USB power supply function - IP65 dust and drip-proof performance with a 2-year warranty

• Non-destructive testing

The CMX3-DL is the flagship model of ultrasonic thickness gauges, equipped with all the features of the MX2-DLとCMX1-DL, achieving a resolution of 0.001mm and a measurement range of 10m. It includes various features such as A/B scope display, independent three gates, automatic temperature compensation, scan mode, and a 8GB data logger. Additionally, the new GAIN SLOPE (TDG) function corrects sensitivity reduction based on propagation time, allowing for more accurate measurements of thick materials and high-damping materials like FRP and rubber than ever before. It also has a film thickness measurement mode, enabling simultaneous measurement of wall thickness and film thickness. ■ Features - Flagship model of ultrasonic thickness gauges - A-scope displaying ultrasonic waveforms and B-scope displaying cross-sectional images - Compatible with both dual-transducer and single-transducer probes - High-resolution mode of 0.001mm - 'GAIN SLOPE' function optimal for measuring high-damping materials and thick objects

• Non-destructive testing

The PZX1-DL is a precision ultrasonic thickness gauge for inspection that can measure materials as thin as 0.15mm with a resolution of 0.001mm. With newly designed signal processing technology, it achieves higher accuracy and a wider measurement range compared to the old model PX-7. It is ideal for thickness measurements after machining parts where accurate thickness measurement is required. In addition to single-point and dual-point calibration, scan mode, alarm mode, and differential thickness measurement mode, it features sensitivity adjustment, sound velocity measurement mode, USB power supply, and a newly added pulse-echo mode that supports measurements from 2 to 900mm, allowing for precise thickness measurement of both thin and thick materials. The large-capacity data logger can store up to 10,000 measurement values. ■ Features - High-resolution thickness gauge with 0.001mm display - Astonishing measurement range from 0.15mm to 900mm - Sound velocity measurement mode for various materials, including resin and cast iron - Optimal size for Japanese people, who generally have smaller hands compared to Westerners - Supports both AA batteries and USB power supply - IP65 dustproof and drip-proof performance with a 5-year warranty

• Non-destructive testing

The PMX3-DL is the flagship model of an ultrasonic thickness gauge for thin and precision inspection, capable of measuring from 0.15mm thin materials to 9m thick materials, with a resolution of 0.001mm. While maintaining its appearance, the internal hardware has been completely renewed, significantly improving measurement accuracy, range, and processing speed. In addition to features such as A/B scope display, independent 3 gates, and scan mode, it also includes a new function called GAIN (TDG) SLOPE, which corrects sensitivity reduction based on propagation time, as well as adjustments for pulse voltage and damping. It supports power supply from mobile batteries and USB connectors of computers. It has an 8GB data logger built-in, allowing measurement data to be easily displayed on a PC. ■Features - Overwhelming measurement range from 0.15mm to 9m - A-scope displaying ultrasonic waveforms and B-scope displaying cross-sectional images - Compatible with various types of single-element probes, including pen types - High-resolution mode of 0.001mm - 'GAIN SLOPE' function optimal for measuring high-damping materials and thick objects

• Non-destructive testing

The R9 is a dedicated ultrasonic thickness gauge for cast iron and cast aluminum. Conventional ultrasonic thickness gauges often confuse the unique noise of cast iron with echoes from the bottom surface, which can result in incorrect thickness readings. The R9 has been developed and calibrated specifically for measuring cast iron and cast aluminum, avoiding the characteristic noise of cast iron and accurately detecting the correct bottom surface echo. It is sized to fit comfortably in the palm of a Japanese hand, allowing for comfortable measurements even during long periods or in dark environments. Additionally, with an IP65 dust and drip-proof rating, it can be safely used in harsh environments where dust and oil mist are present. ■ Features - Ultrasonic thickness gauge developed for measuring cast iron and cast aluminum - Direct input of sound velocity, along with one-point and two-point calibration functions for accurate thickness measurement - High-speed scanning mode capable of 100 measurements per second - Reliable 5-year warranty and IP65 dust and drip-proof performance *For more details, please refer to the PDF document or contact us.

• Non-destructive testing

The UT-3M-EMA is a high-performance electromagnetic ultrasonic thickness gauge that uses electromagnetic ultrasonic transducers (EMAT). Unlike conventional ultrasonic thickness gauges, it does not require the application of a couplant (contact medium), allowing for easy measurement of metal thickness. In addition to multiple manual measurement modes suitable for professional use, it also features a simple measurement mode for beginners, making it easy for anyone to use right away. It has a measurement range of 1.2 to 200 mm and includes multiple measurement modes such as single echo and echo-echo, accommodating various measurement applications. Furthermore, it features a clear 3.5-inch high-precision display, allowing for stress-free use even during long inspections. ■ Features - Measurement range of 1.2 mm to 200 mm (iron) - No need for couplant (contact medium, liquid) application - Easily measures the thickness of the substrate (base material) of painted materials - Can measure without removing oxidation coatings (rust, scale) with tools like grinders - Includes manual measurement modes as well as a simple measurement mode for beginners - Data management software is included as standard *For more details, please refer to the PDF document or contact us.

• Non-destructive testing

The QB-7 series is a magnetic thickness gauge that is ideal for measuring the thickness of non-ferrous (non-magnetic) containers such as plastic bottles, glass bottles, and aluminum cans. The measurement object is placed between the sensor and a metal target ball, allowing for quick and easy thickness measurements even for complex shapes. The probe features a titanium tip, significantly enhancing durability. Additionally, it comes standard with seven calibration test pieces, enabling unprecedented high-precision measurements with a maximum of eight-point calibration functionality. Data management software is included as standard, allowing you to check saved data on a PC. ■ Features - Achieves high precision and high resolution through unique sensor technology - Four types of target balls and seven types of calibration test pieces included as standard - Various display modes including maximum, minimum, average display, and graph display - Inspection can be performed stress-free with an optional footswitch *For more details, please refer to the PDF document or contact us.

• Non-destructive testing

It accurately measures the thickness of coatings, plating, and films. We offer three models: the electromagnetic film thickness gauge 'QC-5F' for magnetic metals like iron, the eddy current film thickness gauge 'QC-5N' for non-magnetic metals like aluminum and copper, and the dual film thickness gauge 'QC-5C' that incorporates both electromagnetic and eddy current methods. It features nine calibration modes, including calibration based on ISO19840, and is a high-performance thickness gauge equipped with continuous measurement and statistical functions. Special probes such as L-shaped probes are also available. ■ Features - Nine calibration modes, including calibration based on ISO 19840 - Display of statistical information such as minimum, maximum, and average values, along with graph display - High resolution & wide measurement range - Automatic probe recognition & sensitivity adjustable keypad - Special probes such as L-shaped probes are also available - Includes continuous measurement mode in addition to standard measurement mode *For more details, please refer to the PDF document or contact us.

• Non-destructive testing

The BOLT-MAXII Ver.2 is a high-performance ultrasonic bolt tension meter equipped with advanced technology in a compact body. It has been completely revamped with new internal hardware, re-emerging as Ver.2. It achieves an overwhelming measurement range from 6mm to 15m, far surpassing conventional devices, and significantly improves measurement accuracy, allowing for precise detection of even slight differences in tension. The "Auto Set" function, which automatically detects echoes, has been enhanced with an improved algorithm for more reliable echo detection. It features a built-in 4GB large-capacity memory and supports power supply from mobile batteries and USB connectors on computers. ■ Features - An overwhelming measurement range of 6mm to 15m for M5 and above - Ultra-high resolution to identify slight differences in tension - Auto Set function for peace of mind for first-time users of ultrasonic devices - Power supply from mobile batteries, USB chargers, and PC USB - IP65 dust and drip-proof performance with a 5-year warranty *For more details, please refer to the PDF document or contact us.

• Non-destructive testing
• Other measuring instruments

The MAXIIJ is the ultimate bolt torque gauge equipped with all the technology accumulated by DAKOTA as a sixth-generation ultrasonic bolt axial force gauge. It features an impressive measurement range of 6mm to 25,400mm, excellent repeatability, and a more sophisticated auto-set function, allowing it to accurately measure bolts and slight differences in axial force that conventional devices cannot measure. In addition to operating on AC power and batteries, it also supports dry batteries, making it usable in any location. The newly added external control function allows the MAXIIJ to be operated by sending commands from external devices, enabling remote measurements and inline automatic measurements. ■ Features - Overwhelming measurement range from M5 and lengths of 6mm to 25m - Multi-echo measurement for more precise axial force measurement - Ultra-high resolution to identify slight differences in axial force - Auto-set function for peace of mind for first-time ultrasonic device users - Excellent expandability with external input/output functions - Supports operation with batteries, AC power, and dry batteries - IP65 dustproof and waterproof performance with a 5-year warranty *For more details, please refer to the PDF document or contact us.

• Non-destructive testing
• Other measuring instruments

METALTEST is a compact hardness tester with an integrated probe and display unit. It measures the hardness of metals with an impressive accuracy of ±1.5%. It excels in measuring thin materials, capable of measuring as thin as 0.08mm (HRC70). Additionally, it has a wider measurement range compared to typical portable hardness testers, accurately measuring various hardness levels from soft to hard metals. The display scale can show Rockwell (HRA, HRB, HRC, HR15, HR30T), as well as Brinell (HB5, HB30), Vickers, and Knoop. ■ Features - Capable of measuring from a minimum thickness of 0.08mm (HRC70), suitable for measuring the hardness of thin plates and coils. - Offers an overwhelmingly wide measurement range compared to rebound (Leeb) and UCI hardness testers. - Exceptional measurement accuracy of ±1.5%. - Allows for accurate measurements in all directions. *For more details, please refer to the PDF document or contact us.

• others
• Other measuring instruments
• Structural Survey

The MetalTest MKII is a high-performance hardness tester capable of measuring the hardness of metals with an excellent accuracy of ±1.5%. Compared to typical portable hardness testers, it has a wider measurement range, accurately measuring various hardness levels from soft to hard metals. It excels in measuring thin materials, with the capability to measure as thin as 0.08mm (HRC70). The display scale can show Rockwell (HRA, HRB, HRC, HR15, HR30T), as well as Brinell (HB5, HB30), Vickers, and Knoop. It is equipped with a variety of features such as statistics, graphs, simultaneous display of multiple scales, and the ability to save measurement values in internal memory. ■ Features - Supports a minimum thickness of 0.08mm (HRC70), capable of measuring the hardness of thin plates and coils - Offers an overwhelmingly wide measurement range compared to rebound (Leeb) and UCI hardness testers - Excellent measurement accuracy of ±1.5% - Allows for accurate measurements in all directions - Diverse display functions including statistics, graphs, and simultaneous display of multiple scales - Internal memory function *For more details, please refer to the PDF document or contact us.

• others
• Other measuring instruments
• Structural Survey

The FX71-DL is an innovative ultrasonic flaw detector that condenses cutting-edge technology into a compact body weighing 400g. It can be operated with one hand, making it comfortable to inspect in high places or tight spaces. In addition to excellent basic performance with a measurement range of 0 to 25,000mm (in steel) and ultra-high resolution of 0.001mm, it is equipped with flaw detection features such as DAC (Distance Amplitude Correction), TCG, AWS, DGS/AVG, and curvature correction functions. It also includes a thickness gauge mode that allows access to all functions of the top model ultrasonic thickness gauge, the "CMX3-DL." It supports power supply from mobile batteries and USB connectors from computers. Additionally, it has a convenient capture (print screen) function that allows you to save the display as an image. ■ Features - Unprecedentedly compact and lightweight (approximately 400g), ideal for measurements in high places and tight spaces - High-resolution measurement mode with a display accuracy of 0.001mm, ensuring high precision - All necessary functions for ultrasonic flaw detection are standard - All functions of the top model ultrasonic thickness gauge "CMX3-DL" are included as standard - Supports power supply from AA batteries, mobile batteries, and USB chargers

• Non-destructive testing
• Other measuring instruments

The FX81-DL is an ultrasonic flaw detector that boasts excellent basic performance with a resolution of 0.001mm and a measurement range of 30m, along with a wide range of features and high versatility that supports automatic inspection. It comes standard with all the necessary functions for ultrasonic flaw detection, such as DAC, TCG, DGS, and curved surface correction (CSC), as well as a thickness gauge mode that includes all the features of the top model ultrasonic thickness gauge "CMX3-DL." With a robust aluminum body, dust and drip-proof design (IP65), and a Blanview LCD display that ensures excellent visibility even in sunlight, it can be safely used in harsh environments. Its excellent power-saving design and large-capacity battery allow for up to 18 hours of continuous operation, and it also supports operation with dry batteries in case of emergencies. Equipped with highly expandable external input and output options, it is capable of immersion testing and automatic testing, making it a high-performance ultrasonic flaw detector with exceptional versatility. ■ Features - Blanview display that is easy to see outdoors - Incredible measurement range of approximately 30m (equivalent to steel) - High-resolution measurement mode with a display of 0.001mm that promises high accuracy - Standard inclusion of all functions of the top model ultrasonic thickness gauge "CMX3-DL" - Supports operation with batteries, AC power, and dry batteries

• Non-destructive testing
• Other measuring instruments