フロアエージェント List of Products and Services

The Floor Unevenness Survey Service is a new survey service that visualizes the height differences, undulations, and steps that occur on concrete floors in logistics warehouses and factories using numerical data and diagrams. Even floors that appear flat can have slight unevenness that may affect driving stability and equipment planning when introducing AGVs or AMRs and advancing automation in warehouses. Floor Agent uses a dedicated measuring device, the Floor Profiler, to measure floor levels with an accuracy of 0.1mm. The collected data can be organized into an unevenness heat map, cross-sectional graphs, a list of measurement results, and repair proposal diagrams, allowing for a quick overview of the high and low areas and the trends of undulations across the entire floor. Furthermore, the service does not end with the survey; as a specialized contractor for concrete floors, we can also propose corrective construction based on the results. For high areas, we recommend unevenness adjustment grinding; for low areas or extensive bumps, we suggest self-leveling; and for joints and steps, we propose the installation of floor bridges, selecting the necessary methods for the required areas. We can make proposals that consider the flow and processes of operating warehouses while avoiding excessive construction. If you are considering checking the floor before introducing AGVs, renovating existing warehouses, or confirming floor precision for automation, please visit the Floor Agent website.

• Surveying Office
• Other analytical equipment
• Surveying

Fix Guard is a penetrating concrete curing agent handled by floor agents. During outdoor construction in the summer, direct sunlight, high temperatures, and wind can cause moisture to rapidly evaporate from the surface of freshly poured concrete. As a result, this can lead to plastic cracking, drying shrinkage cracking, surface roughness, and poor finishing. Fix Guard is a material that helps suppress rapid drying of the surface and assists in initial curing when sprayed before or after concrete placement. It is particularly suitable for outdoor concrete that is exposed to sunlight, such as parking lots, sidewalks, exterior slabs, and store front approaches. Traditional curing methods using watering sheets require labor for watering, laying sheets, removal, and disposal of waste materials, but Fix Guard can be applied with a sprayer, leading to labor savings and reduced work time. It is easy to introduce even in sites where curing mats or poly films are difficult to use, making it suitable for sites that want to manage quality with limited personnel. Additionally, since it is a penetrating type rather than a film type, it naturally evaporates after a certain period of moisture retention and is designed to be compatible with surface hardeners used in subsequent processes. If you want to maintain quality while minimizing the effort of curing during summer outdoor construction, please consider Fix Guard.

• Carports and related materials
• Exterior Materials
• Concrete curing material

The production of polished and terrazzo-style furniture and fixtures is a service that allows for the custom manufacturing of counters, reception desks, display stands, tables, and built-in fixtures tailored to the spatial concepts of stores, commercial facilities, hotels, and showrooms. This service addresses challenges such as when ready-made products do not match the desired image, when there is a need to express a special character that aligns with the brand image, or when there is a desire to enhance the overall cohesion between furniture and interior design. For production, materials that combine aesthetic appeal and durability, such as beer stone and domestically produced polished plaster material EXTONE, can be used. The color of the main material, the type and size of the aggregate, the mixture, the depth of polishing, and the method of achieving gloss can be widely adjusted, ranging from a calm stone-like appearance to a vibrant terrazzo expression. Our company listens to the images of designers and owners, assisting with material selection, suggestions for main material colors and aggregate types, and the creation of finish samples. The ability to confirm the color and appearance of aggregates through samples is also a feature that helps minimize discrepancies in impressions after completion. By combining skilled plaster finishing with polishing techniques, we consider not only the beauty of the furniture itself but also the durability and fit of the fixtures as they are actually used by people over time. For inquiries about the production of polished and terrazzo furniture and fixtures, please consult with our floor agents.

• Artificial stone coating/Terrazzo on-site coating
• Terrazzo coating
• Other furniture

FA Cation Hard is a specialized thin coating repair material that can be used for surface roughening, damage, unevenness, and deterioration caused by rain after concrete placement. It can be applied from 2mm and is designed to exhibit high durability even with a thin layer. It is particularly recommended for floors where vehicle traffic (such as forklifts) is expected, such as truck berths, ramps, parking lots, factories, and warehouses. Additionally, it addresses the aesthetic decline issues associated with conventional repair materials and is designed in colors that blend well with existing concrete, making it easy to use for surface finishing repairs. It can also be utilized as a substrate adjustment material before floor coatings or surface finishes, and it accommodates mirror finishes through polishing. It can be used for crack repairs and joint injection materials, making it highly versatile as a comprehensive repair material for floor concrete. This product emphasizes ease of handling, durability, and practicality on-site. If you are looking for rain damage repair or high-durability repair materials, please contact us via phone or the Ipros inquiry form. We can ship directly as soon as the next day. Feel free to request a quote or any other inquiries.

• Reinforcement and repair materials
• Reinforced concrete construction
• Renovation and repair methods

The curing process after concrete placement is essential for maintaining the quality of the finish, but traditional methods such as watering and using polyethylene film require significant manpower and time, making them tasks that can easily pressure the overall schedule. When considering the laying of sheets, installation of nets, and the removal and disposal of materials after curing, the amount of labor required on-site can be more than expected, often delaying the transition to the next process. Fix Guard is a penetrating type of initial curing agent that provides curing effects simply by spraying a diluted material, and it is constantly being adopted at concrete placement sites nationwide as an alternative to traditional polyethylene film curing. A task that typically takes 3 to 4 people about 3 to 5 hours can be reduced to approximately 30 to 40 minutes with Fix Guard, allowing for both labor savings and schedule compression. Furthermore, since it does not require sheets or wiping, there is no need for removal work or disposal costs, making on-site operations easier after placement. Since the curing process is completed simply by spraying immediately after placement, it is highly recommended for sites struggling with overtime regulations and labor shortages. For more detailed information about the introduction of Fix Guard, please feel free to contact us.

• Concrete curing material
• Concrete construction
• Reinforced concrete construction

In summer, the construction of earthen floors often involves prolonged rough leveling and finishing work under the blazing sun, which can lead to physical exhaustion for workers and increase the risk of heat-related illnesses. In sites with a labor shortage, it is necessary to cover large areas with a limited number of workers, making it easier for concentration to decline due to the heat, which can affect the precision of the finish and work safety. The laser screed is a specialized machine that can perform functions such as [rough leveling, level measurement, tamping, and finishing] all in one, significantly mechanizing the leveling process that often relies on manual labor. With a laser receiver and control system, the height of the screed head can be continuously adjusted, making it easier to achieve high-precision construction while minimizing level variations even on large sites. Initial vibrations help to densify the concrete, contributing to quality stabilization and improved durability. Heat countermeasures are important not only in terms of breaks and hydration but also from the perspective of reducing working hours in the heat itself. The laser screed is particularly suitable for large-scale pouring sites in construction, logistics, and factories, aiming to simultaneously address heat-related illness prevention, labor reduction, and high quality. For inquiries about installation or details on construction, please feel free to contact us through our website. We are also accepting requests for trial installations at any time.

• Concrete Machinery
• Concrete construction

During concrete placement in summer, the compaction work performed by earthworks tends to continue for long periods in high-temperature environments, significantly increasing the risk of heatstroke. Traditional corded vibrators often require multiple workers, including those holding the cord, and with backpack models, the burden of carrying heavy equipment while moving adds to the physical strain in hot conditions. The slab vibrator is characterized as a cordless, self-supporting compaction machine that allows for high reproducibility of construction even with one operator. It can be equipped with up to three powerful φ60mm vibrators and complies with JASS-5 standards for compaction, making it suitable not only for floor slabs in the construction sector but also for civil engineering projects that require high durability. By reducing the heavy labor hours and equipment load for earthworks while ensuring quality, it effectively mitigates the burden of working in the heat, serving as a practical measure against heatstroke. It also offers flexibility to adapt to site conditions, such as switching between 1 to 3 vibrators or accommodating φ40mm, making it suitable for situations where both labor-saving and safety improvements are desired in construction and civil engineering sites. Please consider reviewing your summer construction system. For inquiries, please contact us through our website.

• Reinforced concrete construction
• Concrete Machinery
• Motor graders, roadbed machines, compaction machines

In summer, the concrete leveling work on the ground can significantly drain the physical strength of workers due to the forward-bending posture required under the blazing sun, increasing the risk of heatstroke. In sites with a labor shortage, the burden per person becomes heavier, and the combination of heat and fatigue can lead to decreased concentration and variability in precision. The DX Material KAPPER is an electric leveling machine that assists with rough leveling of ready-mixed concrete, supporting loads of over 100 kg and making it easy to operate with just a hand guide. It can reduce the number of workers needed for leveling work from the traditional 5-6 per 1,000 square meters to just 2-3, allowing for work to progress at speeds of 1.5 km to 3 km per hour, which is expected to shorten the time exposed to the sun. Additionally, the adjustable cover thickness feature allows for comfortable use, and both forward and backward movements can be controlled with a switch, which helps reduce strain on the lower back. Furthermore, the machine weighs 38 kg and is foldable, making it easy to transport, and it operates on a rechargeable battery, producing no exhaust, which contributes to its ease of use. Addressing heatstroke is not only about air-conditioned clothing and hydration but also about reducing the hours of heavy labor in hot environments, making KAPPER a product that aids in site improvement as a concrete solution.

• Concrete Machinery
• Concrete construction
• Construction machinery leasing and rental

Heat-resistant floor coating work is suitable for floors affected by hot water, steam, warm water cleaning, and heating equipment in food factories, kitchens, cleaning rooms, and backyards. Ordinary flooring materials may experience swelling, peeling, discoloration, and softening due to heat, which can hinder hygiene management and work safety. We check the usage temperature, frequency of hot water, drainage slope, cleaning methods, and equipment layout to propose a floor coating specification that matches the site conditions. We particularly emphasize substrate treatment to ensure the floor coating is strong and durable. We remove oil, dirt, weak layers, and old coatings from the existing floor through grinding, cutting, and cleaning to create a substrate that allows the floor coating material to adhere easily before installation. Even if heat-resistant materials are chosen, an unstable substrate can lead to problems due to heat and moisture, making pre-installation checks crucial. We also consider areas where hot water tends to concentrate, such as around drains, riser sections, and machine foundations. We can discuss color coding for hygiene zones and improving cleanability. We can also consult on zoning based on the operational status of food factories and kitchens, holiday construction, and partial renovations. If you are considering heat-resistant floor coatings, please visit the Floor Agent's website. We are an authorized contractor for ABC Trading Company.

• Plastering and painting work
• Other flooring materials

The flooring work using epoxy resin-based floor materials is a construction process that forms a floor surface with wear resistance and dustproof properties on concrete floors in factories, warehouses, workspaces, backyards, and more. It addresses issues such as dust coming from the floor, surface wear from carts and forklifts, easy staining, and the desire to maintain a clean appearance. Our company places particular emphasis on substrate preparation before applying the floor material. We carefully remove weak layers, oil, dirt, and old coatings from the existing floor through grinding, cutting, and cleaning, creating a state that allows for better adhesion of the material, thus ensuring the durability of the flooring. If construction is carried out without assessing the condition of the substrate, it can lead to bubbling, peeling, and lifting, making it essential to build the construction specifications based on on-site verification. Since we also handle flooring work, polishing work, and cleaning work, we can consistently propose solutions from substrate preparation tailored to the degree of floor damage to the finishing touches. We will confirm the construction area, start date, desired color, and slip resistance, and organize the process according to on-site operations. We can also discuss protection for new floors, renovation of existing floors, color coding, and traffic flow indications. If you are considering floor renovation using epoxy resin-based floor materials, please visit the Floor Agent website. Floor Agent is an authorized contractor for ABC Trading Company.

• Special flooring/indoor
• Other flooring materials

Elkure is a concrete surface hardening agent primarily composed of lithium silicate. It can be proposed in cases where issues such as wear on floor surfaces, dust, dirt adhesion, and substrate treatment before line painting arise in logistics warehouses, factories, loading docks, and large stores. By penetrating the concrete surface and reacting with the cement components, it improves the floor surface to be hard and dense, thereby reducing wear caused by forklift traffic. Our company examines the floor's absorption, wear condition, cleaning status, line planning, and usage environment, and considers construction methods in combination with polishing and cleaning. Elkure makes it easier to reduce excess wiping processes and is designed with adhesion to line paints in mind, making it suitable for warehouse floors that require area marking and traffic management. Unlike floor coatings that create a film, it enhances the surface while preserving the original texture of the concrete. It can be considered not only for surface modification of newly installed floors but also for dust control and maintenance improvement of existing floors. Our company is capable of comprehensive construction proposals tailored to the condition of the floor, as we also handle ground work, polishing work, and cleaning work. If you are considering dust control measures or surface strengthening, please visit the Floor Agent website.

• Concrete construction

Antique mortar finish is a plaster finish that utilizes the texture of mortar and the shadows created by skilled craftsmanship, giving a unique expression to the interiors and exteriors of commercial facilities, hotels, stores, brand shops, offices, and residences. Since it has obtained fireproof certification, it is a material that is easy to propose for the interiors and exteriors of hotels and public facilities where both aesthetic design and fire performance are required. Furthermore, it possesses very high durability, making it suitable for stores and facilities with high foot traffic, as well as for walls, fixtures, and counters that are used daily. It can also be used for exterior walls, allowing for a unified material feel between the interior and exterior, and meeting requests to maintain a consistent concept throughout the building. Additionally, it is a significant feature that the variations, shades, luster, and heaviness that are difficult to express with ready-made interior materials can be individually adjusted through the skilled workmanship of artisans. At Floor Agent, we provide comprehensive support from consultation on finish images, sample submission, material selection, substrate confirmation, to construction. If you are considering a plaster finish that combines aesthetic design, fire resistance, and durability, please visit the Floor Agent website. If you have any questions regarding sample production requests or construction, please feel free to contact us.

• Other plastering finishing agents
• Interior coating materials
• Interior and exterior wall coating materials

The new commercial facility that was born in Takanawa, Minato Ward, adopted our original plaster finish, EXTON, for its floors and fixtures, and was constructed by Floor Agent. The project mobilized 40 to 50 craftsmen daily, and it became a large-scale project where the teams for planning, installation, plastering, polishing, and management worked together as one. The role that EXTON played in this facility was not merely that of a finishing material. By applying the same color and pattern to a large portion of the interior, including common areas, free spaces, fixtures such as tables and benches, art space pedestals, and even parts of some stores, it brought continuity and a quiet sense of unity to the entire space. EXTON improves the durability, which was a weakness of polished plaster materials, ensuring that even in places where many people walk, touch, and sit every day, its aesthetic remains intact. Floor Agent includes EXTON in its lineup of construction materials alongside foreign plaster materials like Mortex and Bealston, and it is being implemented in plaster finishing work for commercial facilities, stores, offices, clinics, and public facilities nationwide. For detailed information about EXTON construction, please visit our website or refer to our brochure, and feel free to contact us for any inquiries regarding construction.

• Artificial stone coating/Terrazzo on-site coating
• Interior construction

The production of plaster-finished fixtures is a construction process that gives unique textures to counters, reception desks, display stands, and custom fixtures, tailored to the design concepts of commercial facilities, stores, offices, and brand shops. "We can't find ready-made products that match the spatial worldview." "I want to focus on the material feel." "I want to unify the impression of the fixtures with the floor and walls." We are fully committed to addressing such challenges. Our company listens to the requests of designers, proposes finishing images, provides samples, procures materials, and handles construction by skilled craftsmen all in one go. We can also suggest new domestic plaster finishing methods, such as antique mortar that utilizes inorganic expressions and the shadows of handwork, or EXTONE, which allows for high-design and high-durability finishes through grinding. Not only do we consider the beauty of the fixtures themselves, but we also take into account durability and maintenance as places where people actually touch, place items, and use for a long time. Because our company handles everything from floor construction to finishing plaster and polishing, we can propose solutions that fit the overall space. If you are considering the production of plaster-finished fixtures, please visit the Floor Agent website and feel free to consult with us.

• Spatial Design
• Other fixtures and fittings
• Plastering and painting work

"I want to introduce AGVs to an existing warehouse, but I'm worried that uneven floors and steps will hinder operational efficiency." "I want to automate the warehouse without moving the fixtures, just by smoothing the AGV running routes." "I want to address the load on the AGVs caused by joints and steps." As automation in logistics warehouses progresses, such inquiries have significantly increased in recent years. Our company supports the introduction of AGVs in logistics warehouses with the following construction services: - Comprehensive smoothing of the entire floor to reduce wear【AGV-compatible high-durability self-leveling construction】 - Lowering high areas and flattening joints【Grinding work】 - Repairing defects and cracks【Floor repair work】 For details on various construction services, costs, delivery times, and case studies, please contact us through our website. We also accommodate trial constructions as needed.

• Automated guided vehicles (AGV, RGV)
• Renovation and repair methods
• Reinforcement and repair materials

When utilizing AGVs and AMRs in logistics warehouses, it is important to ensure a high level of floor precision from the time of construction while also securing wear resistance. Our LCS method is adopted in new construction sites of logistics warehouses nationwide, and by mechanizing the process from leveling to final finishing, we achieve a floor level precision of ±3mm within 3m, suppress initial cracking after pouring, and significantly improve durability and wear resistance. By utilizing the reproducibility of machines rather than relying solely on the intuition of craftsmen, we can stabilize quality through a quantified process, achieving a uniform finish even in large-area warehouses. Specific processes: 1. Floor leveling with laser screed Using laser control, we precisely adjust the FL value while simultaneously performing vibration compaction. 2. Compaction with a tamper During bleeding after pouring ready-mixed concrete, we use our self-developed EV tamper to perform vibration compaction again, removing air and water channels. 3. Disc troweling Utilizing the weight of a ride-on trowel, we correct fine irregularities while densifying the surface. If you have any questions about the processes or finishing methods, please contact us through our website. We are also accepting trial construction requests at any time.

• Concrete construction
• Concrete Machinery

In logistics warehouses considering the introduction of AGVs and AMRs, the condition of the floor directly affects the operational efficiency of the transport equipment. Therefore, it is essential to first understand whether the existing floor meets the required running accuracy. Even if the floor appears flat, there may actually be defects, steps, unevenness, or localized sinking that can compromise the running stability of automated transport robots. The floor survey service provided by Floor Agent uses a high-precision profiler to measure floor levels in 0.1mm increments, allowing for the visualization of unevenness and depressions through heat maps and numerical data. This approach offers a significant advantage by enabling a clearer assessment of the current situation, making it easier to organize the scope of necessary repairs, prioritize them, and allocate costs. The measured data is submitted as an unevenness report, which helps to clearly distinguish between areas that can be addressed with localized repairs and those that require comprehensive renovations, thereby improving the accuracy of capital investment planning. This ensures that the necessary decision-making materials are available before implementation and helps to prevent unnecessary renovations. Our company provides a consistent service from measurement to report submission and suggestions for optimal repairs. Therefore, if you are considering the introduction of automated transport vehicles such as AGVs or AMRs, whether for new installations or existing setups, please feel free to contact us.

• Surveying
• Other measuring instruments

Just before the handover of a newly constructed warehouse, dust, minor stains, and remnants of protective materials may remain on the floor, which can lower the overall impression of completion. If the floor does not look well-maintained before handover, the cleanliness and management quality that should be associated with a new building may not be adequately conveyed, potentially leading to a lower evaluation. While Floor Agent is based in Tokyo, we offer concrete floor cleaning services for warehouses and factories nationwide. Using ride-on scrubbers for mechanical cleaning, we can enhance the aesthetic appeal of the warehouse floor before handover by removing dust and dirt that accumulate after the concrete finishing. Unlike manual cleaning, using cleaning machines makes it easier to reduce oversights in the final finishing, even for projects with tight deadlines. This service can be utilized as a cleaning proposal for newly constructed warehouses that want to elevate the final quality of their floors and ensure a high standard at handover. Additionally, we can consistently handle surface hardening material application work after the concrete slab is poured. If you are looking for a finishing contractor for new construction projects such as logistics warehouses or factories, please feel free to contact us. For detailed construction methods and estimates, please visit our company website, and if you have any questions, do not hesitate to reach out to us.

• Building Cleaning Equipment
• Concrete construction

Rust from metal racks and handling equipment in warehouse floors can spread due to rainwater and humidity, leaving reddish-brown stains that can persist for a long time. Simply scrubbing the surface may not remove the pigments that have penetrated the floor, resulting in a worn-out appearance that does not look clean even after cleaning. When rust stains are scattered, it can make the storage environment appear messy, leading to concerns about the condition of the floor during inspections or recruitment. Floor Agent, based in Tokyo, provides concrete floor cleaning services for warehouses and factories nationwide. Using ride-on trowels and scrubbers, we can perform mechanical cleaning efficiently over large areas in a short time. We can also use alkaline electrolyzed water as needed and choose cleaning methods tailored to the nature of the stains. Additionally, we have a system in place to easily handle stubborn stains that are difficult to remove with conventional cleaning, as well as short-term projects before handover and consultations for restoring the premises after moving out. This approach is effective in addressing rust stains on the floor, not just as a cosmetic issue, but as a means to maintain warehouse value and improve handover quality. Please visit our website and watch our construction videos. We are also happy to provide estimates at any time.

• cleaning
• Automated warehouse (AS, RS)

In logistics warehouses, forklifts repeatedly travel along the same paths, making it easy for black tire marks to accumulate in a band around the shipping area. While mopping and general cleaning can remove surface dust, they often fail to lighten the embedded dark stains, causing the entire floor to appear old. Neglecting the deterioration in appearance can impact first impressions during viewings and evaluations during tenant handovers, potentially raising doubts about management quality. Floor Agent, based in Tokyo, provides concrete floor cleaning services for warehouses and factories nationwide. Using ride-on trowels and scrubbers, we can perform mechanical cleaning efficiently over large areas in a short time. We can also use alkaline electrolyzed water as needed, allowing us to select cleaning methods tailored to the nature of the dirt. Our system is well-equipped to handle stubborn stains that are difficult to remove with conventional cleaning, short-term projects before handovers, and consultations for restoring the premises after vacating. We can consistently proceed with consultations for repairs and protective treatments based on the post-cleaning condition, so if you are struggling with floor stains, please feel free to reach out to us. This approach is effective in addressing tire marks not just as a cosmetic issue, but as a means to maintain warehouse value and improve handover quality. Please also check our website and construction videos. We are always available for estimates.

• cleaning
• Sweeping vehicles, grass cutting vehicles, road surface regeneration machines, snow removal machines

The EC site "Kakushin" operated by DX Material Co., Ltd. has started offering services for products from Tenant Company, which the company handles as an authorized dealer. In addition to purchasing and renting cleaning machines and equipment, it is also possible to request the purchase of various consumables and equipment repairs online. Furthermore, with the integrated material and construction service, it is possible to order floor cleaning services using the same product line, and you can receive dispatch from skilled staff who are well-versed in floor cleaning know-how.

• Building Cleaning Equipment
• Automated warehouse (AS, RS)

Floor Agent Co., Ltd. is a specialized contractor based in Tokyo, operating nationwide, offering proposals and construction for plaster finishes in commercial facilities, stores, and offices. We can handle everything from small-scale projects that take about 1 to 3 days to large-scale plaster finishes for building developments. Our company has developed a completely new plaster finish using domestic materials, reducing costs related to distribution, and has implemented it in many projects to date. In addition to traditional materials such as lime plaster, we also carry out construction using popular overseas plaster materials like Mortex and Beerlstone. In the field of specialty plastering, we are one of the few plastering contractors in Japan capable of performing floor polishing finishes (human polishing and terrazzo) using large grinding machines.

• Plastering and painting work
• Spatial Design

At the plaster showroom located at the headquarters of Floor Agent, you can "see and touch" a variety of plaster finishes using original domestic plaster materials, including antique mortar and Exton. You can compare the textures of walls, floors, and fixtures, and we provide consistent support from design proposals to sample creation and meetings, all in line with your design intentions. To make a reservation for a showroom visit, please contact us by phone.

• Plastering and painting work
• Other plastering finishing agents

The comprehensive construction e-commerce site "Kakushin" opened in November 2025. The main services of "Kakushin" are: - Sale of construction materials and consumables High-durability floor repair materials / self-leveling materials / grinding machine attachments, etc. - Sale, lease, and maintenance of construction and finishing machinery Machinery for flooring construction / ride-on cleaning machines / large grinding machines and dust collectors, etc. - Integrated service for materials and labor for handled products Plastering work / flooring work / finishing work / grinding work, etc. The range of products will be expanded in the future, and it is expected to become the number one e-commerce site in the construction industry.

• Other construction services
• cleaning

The floors of logistics warehouses and factories require high durability materials due to the frequent movement of trucks and forklifts. FA Cation Finish offers high durability equivalent to or greater than that of concrete, while also being able to achieve a color similar to concrete. It can be used as a practical floor repair material. We offer a standard type and a pressure-applied type that can repair up to 20mm in one application, along with a dedicated mixing solution.

• Reinforcement and repair materials
• Renovation and repair methods

We provide powerful cleaning that can restore factory and warehouse floors to "like new" condition in a short time. We handle everything from gasoline, diesel, grinding oil, lubricating oil, battery fluid, water stains, mold, paint, tire marks, shoe marks, to line tape marks all at once. After an on-site survey, we remove dust and chips with an EV-type sweeper, lift dirt with our self-manufactured strong alkaline electrolyzed water, scrub clean with a ride-on scrubber under over 600 kg of pressure, and finish with a scrubber for suction and final cleaning. This method surpasses the efficiency of typical manual cleaning operations and contributes to minimizing downtime. Even for areas as large as 10,000 square meters, we have a system in place to complete cleaning, washing, and finishing in one day (weekend work is also possible). We offer nationwide rapid response, primarily in the Kanto region, with a price estimate starting from 200 yen per square meter for oil stain cleaning (for 1,000 square meters). We reliably remove oil stains that can cause slipping and aesthetic deterioration, quickly restoring a safe and clean floor environment. Please share the area and type of dirt with us first. We will provide a quote and the shortest process.

• cleaning

Restoration work can propose appropriate construction without excess or deficiency by conducting a floor survey using a profiler in advance. The survey organizes the locations and repair ranges of unevenness, steps, defects, cracks, puddles, and dirt. We will submit the survey report and propose the optimal construction. 1. Floor repairs (cracks, peeling, anchor marks) 2. Unevenness adjustment and polishing 3. Floor repainting (from removing existing floor paint to new painting) 4. Self-leveling work 5. Powerful cleaning (tire marks, tape marks, battery oil, etc.) We will provide an estimate by combining only the necessary items from the above. We can handle partial repairs to full surface repairs, and phased construction during nights and holidays is also possible. Based on your requests (finishing feel, operating conditions, construction period, budget), we will present a feasible process plan and alternative proposals (VE proposals). We can respond nationwide, starting from small areas. Please share the current condition photos and drawings first. We can also plan and estimate for AGV compatibility simultaneously.

• Logistics and warehouse management systems

Introducing a series of high-durability repair materials that meet the demands of "high durability," "high flatness," and "short construction period" required in logistics warehouses and similar sites. These materials can flexibly accommodate base finishes and floor coatings, and can be widely used from slopes to truck berths. ● Cation Finish: For the restoration of rain-damaged surfaces and small defects. It can be smoothly finished with a thin application of 1.4 to 10mm, excels in color matching, and allows for base finishing. It also addresses repairs for anchor marks, cracks, and peeling. (Thicker application types are also available. Please contact us for more details.) ● Cation Hard: With high fluidity and excellent leveling properties, it corrects unevenness from 2mm upwards. It can be walked on approximately 4 hours after application (at 20°C). It also accommodates joint filling and crack injection. ● Power Leveler: Please use this on floors where vehicle, heavy machinery, and forklift traffic is expected, such as truck berths. It excels in leveling properties and forms a flat base/surface. It can be walked on approximately 3 hours after application (at 20°C). You can download the catalog and SDS from the link below. For detailed pricing and delivery times, please contact DX Material Company.

• Reinforcement and repair materials
• Concrete construction

This is a self-leveling construction that is optimal for correcting unevenness in concrete floors of logistics warehouses and factories where heavy objects such as vehicles and large forklifts are expected to pass. 【Do you have any of the following concerns?】 - I want to correct unevenness, but due to the nature of the facility, it needs to be highly durable to prepare for the passage of heavy objects. - I want to ensure floor leveling in preparation for the introduction of AGVs/AMRs and create a floor with excellent wear resistance. - I want to match the color with the surrounding existing concrete floors. - I want to repair existing floor cracks, peeling, anchor marks, etc., all at once. If any of the above applies to you, we highly recommend the high-durability self-leveling construction by Floor Agent. The FA Power Leveler used can be applied with a thickness of 5 to 50 mm as a base finish for self-leveling material, with a compressive strength (N/mm²) of 52.6 N/mm² at 28 days of age, making it suitable for areas that require durability, such as floors where forklifts pass and truck loading bays, allowing light foot traffic within just 3 hours of base finishing. Therefore, it can also be used in cases where only a short construction period is available, such as night work in operating warehouses. It is also recommended for those concerned about color separation, as it has the property of drying to a color similar to concrete.

• Renovation and repair methods
• Plastering and painting work
• Plastering base material

The "Logistics Warehouse Floor Cleaning Service" is a service provided by a floor cleaning company specialized in logistics warehouses. We have equipment and detergents capable of cleaning over 10,000 square meters per day, enabling a smooth handover. We will respond on the same day for on-site inspections, detailed explanations of the cleaning process, and estimates, so please feel free to contact us for this opportunity. 【Types of stains that can be cleaned】 ■ Tire marks ■ Oil stains ■ Tape and seal residues *For more details, please refer to the related links or feel free to contact us.

• Concrete construction
• cleaning

"Concrete Coating Substrate Treatment" is a construction process that involves removing and grinding existing finishes to create a sound substrate. To ensure strong adhesion for newly applied coatings or coverings, the surface and layer are formed to a high quality. We undertake various types of substrate treatment, from minor to highly challenging tasks. [Purpose of Substrate Treatment] ■ Removal of weak layers ■ Exposure of sound substrate ■ Application of adhesive *For more details, please refer to the related links or feel free to contact us.

• Concrete construction
• Interior construction

The "Slablator" is a labor-saving concrete compaction machine that overturns the common knowledge of conventional compaction work. Equipped with three powerful φ60mm vibrators operating simultaneously, it achieves reliable vibration compaction in accordance with JASS-5 standards, all reproducibly by a single operator. It fundamentally resolves the issues associated with corded and backpack systems that require multiple personnel. This is a new technology that balances "quality," "safety," and "labor-saving." 【Features】 ■ Achieves labor reduction and high quality with a self-supporting machine that does not require connections or carrying ■ Efficiently removes air bubbles with a φ60mm vibrator ■ Flexible vibrator configuration ■ Long-lasting battery operation *For more details, please refer to the related links or feel free to contact us.

• Concrete construction
• Concrete Machinery

The re-vibration and high-density concrete method removes voids and water channels that cause cracking, utilizing the compaction effect of re-vibration to form a dense structure within the concrete and improve its density. It aims to enhance durability, wear resistance, and impact resistance, delay carbonation, suppress cracking, and shorten construction time through simultaneous execution, ultimately extending the service life for various social infrastructure developments such as factories, warehouses, logistics facilities, and roads, as well as contributing to national resilience policies. 【Features】 - Increased service life - Significant crack suppression - Reduction in construction man-hours - Increased asset value - Total cost reduction For more details, please contact us or download the catalog.

• Dam construction
• Earthworks
• Pile and foundation work