Sensors - メーカー・企業37社の製品一覧とランキング

Passive Sensor 3D Surveillance Type for 12m PA-8012

Passive sensor that intelligently controls various functions.

■Optimal for use under harsh installation conditions Even when phenomena that are likely to cause malfunctions occur, such as small animals (mice, dogs, cats), stray light, drafts, and external noise, the dual twin effect ensures minimal impact. ■SC (Automatic Sensitivity Adjustment) Circuit Equipped with an ASC circuit that automatically sets the appropriate sensitivity based on the balance between room temperature and the intruder's body temperature. ■Reliable design resistant to radio interference By adopting a unique N.E. (Noise Eliminator) in circuit and mechanical design, effective measures against electrical noise entering from the line and noise propagating through the air are implemented. ■Alarm Memory Function By adding control contacts externally to the sensor, the activated sensor can be confirmed by the illumination of a display lamp. ■Alarm Indicator Lamp Control By adding control contacts externally to the sensor, the ON/OFF of the indicator lamp can be operated remotely. *It can also be controlled by a switch inside the sensor. ■Trustworthy and user-friendly design ● Low power consumption of 15mA when using DC12V. ● Equipped with a targeting area adjustment function that allows visual confirmation of the area.

企業：セキュリティハウス
価格：Other

Security Sensor Systems

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

High-altitude installation passive sensor, three-dimensional surveillance type, PA-8410

Due to its unique high-density surveillance area, installation in high places such as atriums and lobbies is possible.

■Unique surveillance area that can be installed at high locations This sensor can monitor from high places, which was difficult with conventional sensors. Its unique high-density surveillance area allows for installation at heights of 4m to 8m. The high-density surveillance area, composed of four reflective mirrors, can be used in locations with high ceilings such as atriums and event spaces, as well as under eaves in truck yards. ■Can be installed indoors and semi-outdoors With a rainproof structure, it can be installed not only indoors but also in semi-outdoor areas. It enables monitoring even in places where near-infrared beam sensors cannot be installed. ■Robust housing case It features a housing case made of AES resin, which improves impact resistance and weather resistance. This reduces the risk of damage in places like gymnasiums where ball games are played. ■Rainproof structure In locations where wind and rain can be severe, such as under building eaves, the excellent weather-resistant packing structure prevents water intrusion. (When performing exposed wiring, please use the included waterproof bushing or conduit for wiring.)

企業：セキュリティハウス
価格：Other

Security Sensor Systems

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

High-altitude installation passive sensor, surface surveillance type, PA-8420

Due to its unique high-density alert area, it can be installed in high places such as atriums and lobbies.

■Unique security area that can be installed at high locations This sensor can provide security from high places, which was difficult with conventional sensors. Its unique high-density security area allows for installation at heights of 4m to 8m. The high-density security area, composed of four reflective mirrors, can be used in spaces with high ceilings such as atriums and event spaces, as well as under the eaves of truck yards. ■Can be installed indoors and semi-outdoors With a rainproof structure, it can be installed not only indoors but also in semi-outdoor areas. It enables security in places where near-infrared beam sensors cannot be installed. ■Robust housing case It uses an AES resin housing case, improving impact resistance and weather resistance. The risk of damage is relatively low even in places like gymnasiums where ball games are played. ■Rainproof structure In locations where wind and rain can be severe, such as under building eaves, the excellent weather-resistant packing structure prevents water intrusion. (If exposed wiring is used, please use the included waterproof bushing or conduit for wiring.)

企業：セキュリティハウス
価格：Other

Security Sensor Systems

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Passive Sensor Spot Surveillance Type: Exposed Type PA-750

Passive sensors ideal for spot surveillance at entrances, exits, and passageways.

■ Two types: Ceiling-mounted and Ceiling-recessed These sensors are installed on the ceiling surfaces of entrances, corridors, and other areas to detect intruders. We offer two models: ceiling-mounted and ceiling-recessed, featuring an elegant design reminiscent of downlights, ensuring that architectural beauty is not compromised. ■ Intrusion Area Adjustment Function The width of the monitored area can be adjusted with a single touch according to the location being secured. Wide: At a height of 3.5m, the width is 2.8m Narrow: At a height of 3.5m, the width is 1.4m. Additionally, the area angle can be adjusted from 3° to 30° in 10 steps (vertical angle from -10° to +20°). ■ Sensitivity Adjustment Volume The device is factory-set to the appropriate sensitivity, but it includes a built-in "sensitivity adjustment volume" for fine-tuning based on installation conditions.

企業：セキュリティハウス
価格：Other

Security Sensor Systems

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Passive Sensor Spot Surveillance Type: Embedded Type PA-750U

Passive sensors ideal for spot surveillance at entrances, exits, and corridors.

■ Two types: ceiling exposed type and ceiling embedded type These are sensors installed on the ceiling surfaces of entrances and corridors to detect intruders. We have commercialized two models: ceiling exposed type and ceiling embedded type, featuring an elegant design reminiscent of downlights, ensuring that architectural beauty is not compromised. ■ Intrusion area adjustment function The width of the monitored area can be adjusted with a single touch according to the location being monitored. Wide: Width 2.8m at a height of 3.5m Narrow: Width 1.4m at a height of 3.5m Additionally, the area angle can be adjusted up to 30° in 10 steps (vertical angle from -10° to +20°). ■ Sensitivity adjustment volume The device is factory-set to the appropriate sensitivity, but it also includes a "sensitivity adjustment volume" that allows for fine-tuning of sensitivity based on installation conditions.

企業：セキュリティハウス
価格：Other

Security Sensor Systems

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Passive Sensor PA-4810A

Passive sensor for wall and corner installation using fuzzy theory.

■Adoption of Fuzzy Theory The two outputs from the newly developed dual twin element are divided by the CPU into two pieces of information: the temperature difference and shape difference between the detection object and the background. Using fuzzy theory, it accurately determines whether the detection object is a human or a small animal, and outputs an alarm. Even when phenomena that are likely to cause malfunctions, such as small animals (like mice), stray light, drafts, and external noise occur, the dual twin effect ensures that there is almost no impact. ■Ideal Surveillance Area Utilizing unique optical technology, a multi-parabola mirror is adopted. It monitors three-dimensional space with high density. ■Abnormal Alarm Function While the sensor is in a surveillance state, the built-in program allows the sensor itself to monitor the next functions. If an abnormality is detected, it notifies of the abnormality through continuous alarm output and continuous illumination of the alarm indicator light. ●Low Power Supply Voltage Abnormality… The newly developed CPU constantly monitors the power supply voltage provided to the sensor. If the power supply voltage drops below a certain level, the abnormal alarm is triggered. ●Equipment Abnormality… In the unlikely event that damage or disconnection occurs in the internal circuits or connections of the sensor, the abnormal alarm is triggered. ●Aiming Position Abnormality… After confirming the surveillance area, if the aiming device is forgotten to be returned, the abnormal alarm is triggered.

企業：セキュリティハウス
価格：Other

Security Sensor Systems

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Passive Sensor PA-4820A

Passive sensor for wall and corner installation adopting fuzzy theory.

■Adoption of Fuzzy Theory The two outputs from the newly developed dual twin element are separated by the CPU into two pieces of information: the temperature difference and shape difference between the detection object and the background. Using fuzzy theory, it accurately determines whether the detection object is a human or a small animal and outputs an alarm. Even if phenomena that are likely to cause malfunctions, such as small animals (like mice), stray light, drafts, or external noise occur, the dual twin effect ensures that there is almost no impact. ■Abnormal Alarm Function While the sensor is in a standby state, the built-in program allows the sensor itself to monitor the following functions. If an anomaly is detected, it notifies of the abnormality through continuous alarm output and continuous illumination of the alarm indicator light. ●Low Power Voltage Abnormality… The newly developed CPU constantly monitors the power voltage supplied to the sensor. If the power voltage drops below a certain level, an abnormal alarm is triggered. ●Device Abnormality… In the unlikely event that damage or disconnection occurs in the circuit or connection parts inside the sensor, an abnormal alarm will also be triggered. ●Aiming Position Abnormality… After confirming the surveillance area, if the aiming device is forgotten to be returned, an abnormal alarm will be triggered.

企業：セキュリティハウス
価格：Other

Security Sensor Systems

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Passive Sensor 3D Surveillance Type PA-350

Compact and high-performance passive sensor for upper wall corners.

■High reliability achieved with newly developed CPU The CPU built into the sensor accurately controls detection and counting functions. ■Ideal surveillance area An additional surveillance area is added directly beneath the sensor, achieving a high-density surveillance area with no dead zones (insensitive areas). ■Reliable design resistant to radio interference Effective measures are taken against electrical noise entering from the line and noise propagating through the air through circuit and mechanical design. ■Simplified surveillance area setting The angle of the surveillance area can be easily adjusted by sliding the detection unit. ■Count setting switch A built-in count setting switch allows for switching between 2 counts and 4 counts depending on the installation location and intended use. ■User-friendly design ● Equipped with an operation indicator light for convenient operation confirmation (can be turned off permanently with a switch). ● Terminal connection type for convenient wiring. ● Simple and smart design.

企業：セキュリティハウス
価格：Other

Security Sensor Systems

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Passive Sensor Passive Type Far Infrared Surface Surveillance Type PA-360

Compact and high-performance passive sensor for upper wall and corner.

High reliability achieved by newly developed CPU The CPU built into the sensor accurately controls detection and counting functions. Ideal surveillance area An additional surveillance area is added directly beneath the sensor, achieving a high-density surveillance area without dead zones (insensitive zones). Reliable design resistant to radio interference Effective measures are taken against electrical noise entering from the line and noise propagating through the air through circuit and mechanical design. Simplified surveillance area settings The angle of the surveillance area can be easily adjusted by sliding the detection unit. User-friendly design ● Equipped with an operation indicator light for convenient operation confirmation (can be turned off permanently with a switch). ● Terminal connection for convenient wiring. ● Simple and smart design.

企業：セキュリティハウス
価格：Other

Security Sensor Systems

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Passive Sensor Infrared Type Spot Surveillance Model PA-650

Passive sensor for installing on door frames and small walls, ideal for monitoring entrances, exits, and passageways.

■Ideal for Spot Surveillance This is a passive sensor for spot surveillance, installed at the doorways and small wall sections to catch intruders. ■Switchable Surveillance Areas The area can be switched between wide and narrow depending on the entrance size. *Wide Area: Width 2.4m (at height 3m) *Narrow Area: Width 1.2m (at height 3m) The depth area can also be adjusted at an angle between 5° to 25° from vertical. ■Convenient Features and User-Friendly Design ● Built-in adjustment volume for convenient sensitivity settings ● Wide range of power supply voltage (DC10.5V to 30V) ● LED for operation confirmation (Green LED lights up during alarm) ● Simple and smart design that fits the front mask.

企業：セキュリティハウス
価格：Other

Security Sensor Systems

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Outdoor/Indoor Passive Sensor PIR-T15W(BL)

Outdoor and indoor passive sensor that significantly reduces missed reports and malfunctions with its unique triple mirror system and signal processing method.

■Triple mirror that forms a unique area Equipped with three sets of optical units in the sensor. This is a new type of passive sensor that features twin-type elements (newly developed) in each unit. The area formed by the three sets of optical units significantly reduces false alarms and malfunctions due to its unique layout design. Additionally, the design resembles an outdoor light, and the internal structure allows for area adjustment (movable mirrors), making it difficult to infer the direction of the area from the appearance, thus enhancing security. ■Reduction of malfunctions caused by small animals By adopting independent detection units for each mirror, signal processing reduces malfunctions caused by small animals such as cats. Furthermore, by using the pet mode (only for three-dimensional vigilance type), it becomes possible to cancel out medium-sized dogs (approximately 50 cm in height), allowing for operation in homes with pets. Additionally, by attaching a bird stopper to the top, it becomes less likely for birds to perch, significantly reducing unexpected malfunctions.

企業：セキュリティハウス
価格：Other

Security Sensor Systems

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Outdoor/Indoor Passive Sensor MS-12T-N

Reduced false alarms with dual-direction AND detection in horizontal and downward areas! More stable security is now possible outdoors.

■ Adoption of 2-direction AND detection for horizontal area and downward area The detection method outputs a detection signal only when both the horizontal area and downward area detect something, which reduces false triggers caused by small animals like dogs and cats, as well as false triggers due to excessive detection area extension, enabling more stable security outdoors. ■ Outdoor installation possible It has a rainproof structure, allowing for outdoor installation. It can be mounted on walls and poles, so it does not limit the installation location. (Additional mounting brackets are required for pole installation.) ■ Day/night discrimination function Equipped with a day/night discrimination function that controls output based on surrounding brightness. It can operate only at night. (Adjustable from approximately 10lx to infinity) ■ Sensitivity adjustment volume It has a built-in sensitivity adjustment volume that allows fine-tuning of sensitivity according to the installation environment, application, and operating conditions. The sensitivity for detecting human bodies can be adjusted in the range of approximately 30% to 170%. ■ Convenient features and user-friendly design ● The power supply voltage ranges from 10.5 to 30V (no polarity). ● It has a count switching function that allows for changing the number of sensor counts (1 time/3 times). ● There is a tamper output on the main unit. ● It includes an operation indicator light for convenient operation confirmation (red LED).

企業：セキュリティハウス
価格：Other

Security Sensor Systems

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Outdoor/Indoor Passive Sensor 3D Detection Type PA-15W

Outdoor passive sensor with adjustable angles for free positioning.

■Can be installed outdoors and semi-outdoors Due to its rainproof structure, it can be installed not only indoors but also outdoors and semi-outdoors. Moreover, it can be mounted on ceilings, walls, and poles, allowing for flexible installation locations. Additionally, the pitch of the mounting base is compatible with commercially available embedded boxes, enabling a neat installation. ■Fits well with exteriors With a novel design that has never been seen before, it perfectly fits into exterior coordination. Its smart design matches well in various locations, whether indoors or outdoors. ■Supports simple outdoor security This passive sensor can meet the simple security needs in places where near-infrared beam sensors cannot be installed or where the design of the exterior is prioritized. (However, please avoid using it for serious security or surveillance systems.) ■One-touch angle adjustment With a new type of angle adjustment mechanism, the sensor's angle can be adjusted up and down, left and right with just one touch. ■User-friendly design ● Equipped with an operation indicator light for convenient operation confirmation. (Lights up when detecting) ● Flexible installation with three types of options. ● Wide detection area (3D detection type 15m x 15m, linear detection type 30m)

企業：セキュリティハウス
価格：Other

Security Sensor Systems

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Outdoor and indoor passive sensor, surface surveillance type, PIR-50N

Wide area, long-distance regions can be monitored with a surveillance type.

Wide-range, long-distance surveillance area The unique surveillance area can monitor a wide range and long distance, with a surface surveillance type capable of a 50m range. ■ Installable outdoors and indoors It can be installed not only outdoors but also indoors. Since it is installed on one side only, it can easily provide surveillance in places where opposing infrared sensors cannot be installed. ■ Sturdy housing case It uses an AES resin housing case, improving impact resistance and weather resistance. There is less concern about deterioration from direct sunlight and wind and rain outdoors, and the standard steel plate long hood reduces the impact of bird droppings. ■ Rainproof structure Even in places exposed to wind and rain, such as under eaves of buildings or on freestanding poles, the excellent weather-resistant packing structure prevents water intrusion. (If installing with exposed wiring, please use the included waterproof bushing or conduit.) ■ Features that assist in operation and inspection after installation ● Equipped with a sighting device A sighting device is included to easily set and adjust the surveillance area. ● C contact output The alarm contacts use long-lasting, silent, non-voltage semiconductor contacts to form the C contacts.

企業：セキュリティハウス
価格：Other

Security Sensor Systems

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Infrared sensor near-infrared beam interruption type PR-11BE

Outdoor/indoor mountable one-sided wiring reflective infrared sensor.

■ Convenient one-sided wiring It can be used with one-sided wiring, making it suitable for locations where dual-sided wiring is difficult. Since the lighting and receiving parts are integrated into a reflective sensor, the wiring work only involves the sensor body. Additionally, maintenance is hassle-free. ■ Installable both outdoors and indoors The installation location is not limited to outdoors or indoors. It comes with two types of attenuation sheets for adjusting the light axis, one for outdoor use and one for indoor use. Mounting brackets for poles are also included as standard. (Compatible poles: φ38 to φ45mm) ■ Easy light axis adjustment Light axis adjustment can be done at just one location on the sensor. The adjustment is performed using a sighting device, the included attenuation sheet, and the light sensitivity indicator. ■ Excellent disturbance light characteristics By adopting a special filter that efficiently cuts visible light and enhancing the disturbance light compensation circuit, it is unaffected by changes in illumination of up to 50,000 lux. Influences from sunlight, mercury lamps, fluorescent lights, and car headlights do not pose a problem under normal usage conditions. ■ Freely adjustable monitoring direction The lens can be moved horizontally (±90°) and vertically (±10°), allowing for flexible setting of the monitoring direction, which does not limit the installation location and expands its applications.

企業：セキュリティハウス
価格：Other

Security Sensor Systems

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Sensors - メーカー・企業37社の製品一覧とランキング

Sensorsのメーカー・企業ランキング

Sensorsの製品ランキング

Sensorsの製品一覧

Passive Sensor 3D Surveillance Type for 12m PA-8012

High-altitude installation passive sensor, three-dimensional surveillance type, PA-8410

High-altitude installation passive sensor, surface surveillance type, PA-8420

Passive Sensor Spot Surveillance Type: Exposed Type PA-750

Passive Sensor Spot Surveillance Type: Embedded Type PA-750U

Passive Sensor PA-4810A

Passive Sensor PA-4820A

Passive Sensor 3D Surveillance Type PA-350

Passive Sensor Passive Type Far Infrared Surface Surveillance Type PA-360

Passive Sensor Infrared Type Spot Surveillance Model PA-650

Outdoor/Indoor Passive Sensor PIR-T15W(BL)

Outdoor/Indoor Passive Sensor MS-12T-N

Outdoor/Indoor Passive Sensor 3D Detection Type PA-15W

Outdoor and indoor passive sensor, surface surveillance type, PIR-50N

Infrared sensor near-infrared beam interruption type PR-11BE

Sensorsに関連する検索キーワード