Sensors Product List and Ranking from 636 Manufacturers, Suppliers and Companies | IPROS

Last Updated： Aggregation Period:Aug 12, 2026～Sep 08, 2026
This ranking is based on the number of page views on our site.

Sensors Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Aug 12, 2026～Sep 08, 2026
This ranking is based on the number of page views on our site.

  1. FUREX Tokyo//others
  2. イーストバイオ Osaka//Medical and Welfare
  3. ホトロン Tokyo//Building materials, supplies and fixtures manufacturers
  4. 4 セキュリティハウス Okayama//Electrical equipment construction business
  5. 5 ビーイーエージャパン Kanagawa//Building materials, supplies and fixtures manufacturers
Go to Company Ranking

Sensors Product ranking

Last Updated： Aggregation Period:Aug 12, 2026～Sep 08, 2026
This ranking is based on the number of page views on our site.

  1. Coil installation work made easy! One-turn loop coil vehicle detection sensor. FUREX
  2. Monitoring Sensor "Tech Mat" イーストバイオ
  3. Ondroid Temperature and Humidity Measurement System [NETIS Registered] GRIFFY
  4. 4 3D Laser Sensor for Sheet Shutter "Wide Scan" ビーイーエージャパン
  5. 5 Rear Confirmation Sensor "Truck Sonar"

Sensors Product List

2401～2430 item / All 3049 items

Displayed results
Akemi-chan Desktop Receiver Set HCS-115(T)

Akemi-chan Desktop Receiver Set HCS-115(T)

The door and window sensor transmitter is packaged with a tabletop receiver. It has been pre-registered for radio frequency settings so that you can use it immediately.

■ Door and Window Sensor Transmitter ● It comes with a switch that staff or family members can use to turn it on and off. ● It can be easily installed on sliding doors or hinged doors (screws and double-sided tape included). ■ It includes double-sided tape that "leaves no residue after removal." This allows for easy installation and removal without damaging the installation surface. ● The transmitter is powered by batteries, so there is no need for electrical work. ● It uses a dedicated lithium battery for long life (approximately 8 years with 20 transmissions per day). ■ Tabletop Receiver ● When it receives a signal from the transmitter, it alerts you with a gentle melody (chime sound) and a flashlight. ● You can choose from 8 different melodies (chime sounds). ● The alert duration can be selected from 7 options ranging from 3 seconds to 120 seconds, including continuous mode. ● Easy installation! Just place it on a table and plug the AC adapter into an outlet to use. Relay Unit (Optional) RTXF-300 It relays low-power radio waves, extending the transmission range up to 100 meters in line of sight. Multiple relay units can be added as needed.

  • Security Sensor Systems
  • Security devices
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wandering Notification Tatsu-kun (Desktop Receiver) HS-WK(T)

Wandering Notification Tatsu-kun (Desktop Receiver) HS-WK(T)

A wheelchair is used with a seat sensor placed on the chair. When you get off (or fall from) the wheelchair, it will notify you with a flash and melody.

Features ● This is a combination product of the seat sensor "BSP-33," the jack-equipped transmitter "HC-116(B)," and the tabletop receiver "HC-350"/portable receiver "RXF-60K." ● It is pre-registered for radio frequency settings so that it can be used immediately. ● If the user gets off (or falls from) the wheelchair, it will notify you with a receiver installed within 100 meters. (However, the distance may be shorter depending on surrounding conditions, such as inside reinforced concrete buildings.) Seat Sensor - Daily life waterproof specification ● Detection output: No-voltage a contact (when pressed) ● Pressure sensitivity: 1.6–1.8 kg/10 cm² ● Material: Surface - PVC (cream), Back - soft PVC (gray) ● External dimensions: 330 × 330 × 6 mm ● Lead wire: 1m cable with Kevlar wire (cream color/RCA plug included) Dedicated Jack-equipped Transmitter HC-116(B) (with on/off switch): Includes two AA alkaline batteries and a strap with a clip.

  • Security Sensor Systems
  • Security devices
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wandering Notification Tatsu-kun (Portable Receiver) HS-WK(KE)

Wandering Notification Tatsu-kun (Portable Receiver) HS-WK(KE)

It is used by placing a seat sensor on a wheelchair or chair.

■Features ● This is a combination product of the seating sensor "BSP-33," the transmitter with jack "HC-116(B)," the tabletop receiver "HC-350," and the portable receiver "RXF-60K." ● It is pre-registered for radio frequency settings so that it can be used immediately. ● If the user gets off (or falls from) the wheelchair, it will notify you with a receiver installed within 100 meters. (However, the distance may be shorter depending on surrounding conditions, such as inside reinforced concrete buildings.) ■Seating Sensor - Daily life waterproof specification ● Detection output: No-voltage a contact (when pressure is applied) ● Pressure sensitivity: 1.6–1.8 kg/10 cm² ● Material: Surface - PVC (cream), Back - soft PVC (gray) ● External dimensions: 330 × 330 × 6 mm ● Lead wire: 1m cable with Kevlar wire (cream color/RCA plug included) ■Dedicated Transmitter with Jack ■HC-116(B) (with on/off switch): Includes two AA alkaline batteries and a strap with a clip.

  • Security Sensor Systems
  • Security devices
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wandering Notification Sensor-kun Indoor/Outdoor Type HS-103

Wandering Notification Sensor-kun Indoor/Outdoor Type HS-103

We will notify your family 100 meters away. The tabletop receiver will alert with a flash and melody. The notification time can be adjusted.

■Quickly catch wandering elderly individuals ■Sensors installed near exits quickly detect the movements of wandering elderly individuals and notify you through a receiver set up within 100 meters. ■This helps protect the safety of the elderly and reduces the burden on their caregiving families. ■Notification through sound and light ■When wandering is detected, the receiver installed within 100 meters alerts you with chime sounds and lamp indicators. ■Installable anywhere without location restrictions ■The sensors are battery-operated, allowing installation in places without power supply. ■Additionally, they are wireless, eliminating the need for wiring work, and they are compact and unobtrusive. ■Receivers that can be chosen according to purpose ●HC-350 (Tabletop Receiver): ■This tabletop model can be used immediately by simply plugging the included AC adapter into an outlet. ■You can choose from 8 different melodies or chimes, and it visually notifies you with a built-in flashlight. ■Notification duration can be selected from 3 seconds to 120 seconds, with 7 options and a "continuous" mode. ■The transmission range of the transmitter is approximately 100 meters in line of sight.

  • Security Sensor Systems
  • Security devices
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wandering Notification Haruo-kun HCS-CS30(T)

Wandering Notification Haruo-kun HCS-CS30(T)

It is a sensor with two functions: "Wandering Notification" and "Emergency Call." It is easy to use; just clip it to something you want to be notified about when it is moved away.

■Operation ■The clip emergency sensor transmitter can be attached to items you want to be notified about when they are moved or separated. When the string is pulled, it sends a low-power radio signal to a receiver within 100 meters to alert you. ■Clip Emergency Sensor Transmitter 《Two Convenient Functions》 ●The call button on the main unit can be used for emergency contact or calling. ●It can be used by clipping it onto items you want to be notified about when they are moved away. 《Easy Installation and Operation with Abundant Accessories》 ●You can use the included long and short clips and carabiners for various purposes. ●The transmitter can be easily mounted using the included double-sided tape or Velcro tape. 《With On/Off Switch》 ●It comes with an on/off switch for staff or family members. (The main unit's "call" button operates continuously regardless of ON/OFF.) ●The transmitter uses two AA alkaline batteries, which can last for about 5 years (if transmitting 10 times a day). It also has a low battery alert function. 《No Wiring Required》 ●The radio signal reach from the transmitter to the receiver is approximately 100 meters in line of sight. It can be easily installed in homes or facilities. ●The clip-on string has a safety feature that detaches when a certain amount of force is applied.

  • Security Sensor Systems
  • Security devices
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Human Motion Sensor (Exposure Type) HM-1B

Human Motion Sensor (Exposure Type) HM-1B

Direct reflection method using near-infrared beams. It is a sensor that is not affected by temperature changes. It is suitable for installation in hallways and similar areas.

■Features ● Ideal for detecting movement for life safety alert systems. ● Designed for wall mounting. ● The area beam can be adjusted up to 1 meter with a single unit. ● Can be installed to avoid detecting pets like dogs and cats, making it suitable for pet-friendly products. ● A type that does not make mechanical noise, suitable for installation in hallways. * Always connect the motion sensor to the receiver using an AND connection.

  • Security Sensor Systems
  • Security devices
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Toilet Sensor (Exposed Type) TS-7

Toilet Sensor (Exposed Type) TS-7

In case of emergency! We will notify you if the usage time is long. A sensor that measures distance reduces malfunctions caused by changes in the floor surface.

■Overview ■When used, the toilet sensor detects and outputs signals. ■It detects whether someone is moving or stationary. ■If used for a preset time (e.g., 10 minutes) set in the toilet life safety notification device "SAH-2(T)", it will notify with a lamp or buzzer for 5 minutes in advance. If you do not exit the toilet or press the reset switch during this time, it will notify family members or the management office. ■Distance Measurement ■Seven beams independently measure the distance to the floor and automatically set the detection output height for each. ■It detects the height from the floor. ■Area Setting Changes for the Head ■The sensor head can be adjusted in four stages from 0° to 9°, and the area settings can be selected from a total of nine patterns, including basic settings, through deletion and height changes, allowing installation in the toilet. Three Types to Choose From There are two exposed types and one embedded type available, allowing you to select a sensor that fits the installation location. ●TS-7 (Exposed Round Type) Main installation locations: Low ceiling areas, facilities for specific users (private rooms) Features: Exposed type with a small volume and surface area, dome-shaped. However, it has a black color and many window surfaces. ●TS-7U (Embedded Type) Main installation locations: New construction facilities.

  • Security Sensor Systems
  • Security devices
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Toilet Sensor (Exposed Square Type) TS-7R

Toilet Sensor (Exposed Square Type) TS-7R

If there are remaining individuals in the restroom of public or commercial facilities, it will be detected. It will notify of prolonged usage to prevent accidents or troubles in advance.

■ When the toilet is used, the toilet sensor detects it and outputs a signal. It detects whether the user is moving or stationary. If the toilet is used for a pre-set time (e.g., 10 minutes) set in the toilet life safety notification device "SAH-2(T)", it will notify with a lamp or buzzer 5 minutes in advance. If the user does not exit the toilet or press the reset switch, it will notify family members or the management office. ■ Toilet-specific sensor Thanks to unique technology, seven light axes independently recognize the distance from the floor to the toilet seat and automatically set the initial configuration. Among the seven, the central one and one behind it adjust the height of the area for the toilet seat and lid. ■ Notification of prolonged use When connected to the toilet life safety notification device SAH-2(T), it will output a signal if used for longer than the set time (usage detection: OFF, 5 seconds, 2, 3, 5, 7, 10, 12, 15, 20, 25, 30, 40, 50, 60, 90 minutes). Additionally, it has a system UP function that notifies in advance about reporting via lamp or buzzer. ■ Installation locations It can be installed in public facilities such as department stores, supermarkets, train stations, libraries, art museums, museums, and schools.

  • Security Sensor Systems
  • Security devices
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Predictive Monitoring Sensor HC-MR1

Predictive Monitoring Sensor HC-MR1

By being able to grasp the signs of dangerous behavior through images, we can reduce the burden of caregiving and decrease the occurrence of lighting accidents.

■Operation ● Detects the movements of users on the sensor bed in the room. ● Notifies staff on their "mobile devices." They can view the screen to determine the necessity and priority of visits. ● The detected data is sent to and stored on the "server PC," allowing for integrated management. The detectable actions are the following seven types: 1. Getting up 2. Sitting on the edge 3. Climbing over the rail 4. Leaving the bed 5. Sliding off 6. Entering the room 7. Exiting ■Sensor Accurate image analysis with minimal false alarms ● The sensor can accurately recognize the human body from three-dimensional shapes. ● There is no performance degradation even in complete darkness during sleep. ■Features Check the room's status at any time ● Real-time video can be checked regardless of day or night. ● Users can be monitored without waking them during sleep. ● Privacy is protected due to the silhouette images. ■Identification of accident causes and situation understanding ● The detection history at the time of notification (10 to 120 seconds before and after) can be checked to identify accident factors. ● 24-hour video recording (up to 3 beds simultaneously) allows for monitoring the movements of concerned users and visit situations.

  • Security Sensor Systems
  • Security devices
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Life Safety Sensor Exposure Type SA-750

Life Safety Sensor Exposure Type SA-750

This is a sensor dedicated to the Living Safety Notification System, which adds a time function to the human movement sensor for enhanced living safety notifications!

■Living Safety Sensor This is a dedicated sensor for the 'Living Safety Notification System,' which integrates a "human movement sensor" with the time function of a "living safety notifier." It detects human movement using a passive sensor, and if no movement is detected within a pre-set timer duration, it alerts to a change in living rhythm. The timer can be set to 15 different durations (20 seconds, 5 minutes, 1, 6, 8, 9, 10, 11, 12, 13, 15, 16, 18, 22, and 24 hours). ■Two Types: Surface-Mounted and Recessed It is installed on the ceiling surface of corridors and living spaces used in daily life. With a sophisticated design reminiscent of downlights, both the surface-mounted and recessed types do not compromise architectural beauty. ■User-Friendly Design To eliminate the relay operation sound during detection, a photoMOS relay has been adopted. This allows for a quiet living environment without worrying about the sensor's operational noise. The detection indicator light also uses a gentle green color that is easy on the eyes. ■Pre-Notification Function If no human movement is detected within the set time, a pre-notification output occurs 5 minutes in advance. By connecting a buzzer or light, the system can be effectively utilized.

  • Security Sensor Systems
  • Security devices
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Life Safety Sensor Embedded Type SA-750U

Life Safety Sensor Embedded Type SA-750U

This is a sensor dedicated to the Living Safety Notification System, which adds a time function to the human movement sensor for enhanced living safety notifications!

■Living Safety Sensor This is a dedicated sensor for the 'Living Safety Notification System,' which integrates a "human movement sensor" with the time function of a "living safety notifier." It detects human movement using a passive sensor, and if no movement is detected within the pre-set timer duration, it alerts to a change in living rhythm. The timer can be set to 15 different durations (20 seconds, 5 minutes, 1, 6, 8, 9, 10, 11, 12, 13, 15, 16, 18, 22, and 24 hours). ■Two Types: Surface-Mounted and Recessed It is installed on the ceiling surfaces of hallways and living rooms used in daily life. With an elegant design reminiscent of downlights, both the surface-mounted and recessed types do not compromise architectural beauty. ■User-Friendly Design To eliminate the relay operation sound during detection, a photoMOS relay has been adopted. This allows for a quiet living environment without worrying about the sensor's operational noise. The detection indicator light also uses a gentle green color for the eyes. ■Pre-Notification Function If no human movement is detected within the set time, a pre-notification output will occur 5 minutes in advance. By connecting a buzzer or light, the system can be effectively utilized.

  • Security Sensor Systems
  • Security devices
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Twin mirror type passive sensor PA-6614WA

Twin mirror type passive sensor PA-6614WA

A twin mirror system that constitutes a unique surveillance area.

■Anti-Blind Function This function detects interference applied to the front of the sensor. If an obstruction is attached to the front, it will issue a warning through the output of a trouble alarm and the illumination of a trouble indicator light. The output will stop once the obstruction or prank is no longer present, but if a trouble alarm has been triggered, please immediately check the operation of the sensor. ● The anti-blind function should be on alert 24 hours a day. ● As a warm-up, the trouble alarm will not be output for about 2 seconds after power is turned on. ● The anti-blind function detects malicious interference aimed at the sensor. * Transparent sprays or items with low near-infrared reflectivity may not be detected. ■Tamper Function This function monitors the installation status of the sensor to detect malicious interference. If the sensor is removed or in an incomplete installation state, a tamper alarm will be triggered to issue a warning. The output will stop once the sensor is properly installed again, but if a tamper alarm has been triggered, please immediately check the operation of the sensor.

  • Security Sensor Systems
  • Security devices
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor 3D Surveillance Type PA-6812WA

Passive Sensor 3D Surveillance Type PA-6812WA

Wide-base passive sensor with built-in anti-blind function.

■Anti-Blind Function This function detects interference applied to the front of the sensor. If an obstruction is attached to the front, it will issue a warning through the output of a trouble alarm and the illumination of a trouble indicator light. Once the obstruction or prank is removed, the output will stop, but if a trouble alarm has been triggered, please immediately check the operation of the sensor. ● As a warm-up, the trouble alarm will not be output for about 2 seconds after power is turned on. * Transparent sprays or items with low near-infrared reflectivity may not be detected. Wide Base Design ● By widening the base (Φ150mm), the issue of noticeable dirt marks on the ceiling surface during sensor replacement is resolved. ■Auto Reset Memory Function When multiple sensors are connected, you can confirm which sensor triggered the alarm by the blinking and illumination of the memory indicator light (yellow) during the alert. ● The memory indicator light will blink for 3 minutes after the alarm is triggered, then continue to illuminate for 47 minutes before automatically turning off. ● This function can be disabled using the mode selector.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor 3D Surveillance Type PA-6812W

Passive Sensor 3D Surveillance Type PA-6812W

A passive sensor with a wider base than before, taking into account the dirt marks at the installation location.

■New Design ● By widening the base (Φ150mm), the issue of noticeable dirt marks on the ceiling surface during sensor replacement is resolved. ■Auto Reset Memory Function When multiple sensors are connected, it is possible to confirm which sensor triggered the alarm during the alert state by the flashing and lighting of the memory indicator light (yellow). ● The memory indicator light flashes for 3 minutes after the alarm is triggered, then continues to light continuously for 47 minutes before automatically turning off. ● This function can be disabled using the mode selector. ■Switchable Count Function Depending on the installation location, the mode selector allows for optional settings of 1, 2, 3, or 4 counts. ■Improved Installation and Maintenance The snap-in method is adopted for attaching and detaching the sensor unit and base unit, allowing for safe and smooth operation even at high locations with a one-touch action. ■Alarm Output Switching Function The alarm output can be switched between contact a or contact b using the mode selector, making system configuration easier. ■User-Friendly Features ● Equipped with an alarm indicator light that is convenient for operation confirmation. (During alarm: red LED lights up, during memory: yellow LED lights up)

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor PA-6812B(BL)

Passive Sensor PA-6812B(BL)

Basic sensors with energy-saving and compact design!! Black (BL) specifications are now available for all models.

Energy-saving Design 1 (Low Current Consumption) Reduces current consumption to about one-third (8mA) compared to our conventional products. Allows the use of smaller power supplies than before, enabling cost reduction. Energy-saving Design 2 (Low Voltage) Operating voltage is DC 7 to 30V. Allows for wire selection and long-distance wiring without much concern for voltage drop due to wiring resistance. Suitable for renewals as well. Black Color Available for All Alert Models We have introduced a black version that considers harmony with ceilings in temples, shrines, museums, art galleries, and stores. This allows the sensor to blend into the background and remain inconspicuous (does not detract from aesthetics). The visibility and sensitivity of the LED are equivalent to those of the white version. Unique Alert Area Configuration Our unique optical technology creates a sharp alert area, providing effective detection performance with a movable mirror regardless of area settings. Improved Installation and Maintenance We have adopted a snap-in method for attaching and detaching the sensor unit and base unit, allowing for easy one-touch operation and smooth work.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor Spot Surveillance Type for 5m - PA-6705

Passive Sensor Spot Surveillance Type for 5m - PA-6705

Standard passive sensor equipped with an auto-reset memory function.

■Auto Reset Memory Function When multiple sensors are connected, you can confirm which sensor triggered the alarm during standby by the flashing and lighting of the memory indicator (yellow). ● The memory indicator will flash for 3 minutes after the alarm is triggered, then continue to light continuously for 47 minutes before automatically turning off. ● This function can be disabled via the mode selector. ■Easy Sensitivity Adjustment Function Sensitivity settings can be adjusted in four levels by switching the mode selector. Security can be performed at the optimal sensitivity according to the installation location. ● Adjustment range: 60%・80%・100%・120% ■Device Abnormality Alarm Function In the event of damage or disconnection in the sensor's internal circuit or connection parts, the system will notify you of the abnormality with continuous alarm output and the continuous lighting of the alarm indicator. ■Reliable Design Resistant to Radio Interference Effective measures have been taken in circuit and mechanical design against electrical noise entering from the line and noise transmitted through the air. ■Alarm Output Switching Function The alarm output can be switched to contact a or contact b using the mode selector, making system configuration easier.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor 3D Surveillance Type for 20m PA-5020F

Passive Sensor 3D Surveillance Type for 20m PA-5020F

Wide-area surveillance passive sensor that controls various functions with a CPU.

■Dual Twin Element + CPU The CPU intelligently controls detection functions, alarm memory functions, and more. ■Ideal for Use in Harsh Installation Conditions Even in the presence of phenomena that are likely to cause malfunctions, such as small animals (mice, dogs, cats), stray light, drafts, and external noise, the dual twin effect ensures minimal impact. ■ASC (Automatic Sensitivity Adjustment) Circuit Equipped with an ASC circuit that automatically sets the appropriate sensitivity based on the balance between room temperature and the intruder's body temperature. No sensitivity adjustments are needed for each season. ■Reliable Design Resistant to Radio Interference By adopting a unique N.E. method (Noise Eliminator) in circuit and mechanical design, effective measures against electrical noise entering from the line and noise propagating through the air are implemented. ■Ideal Surveillance Area Utilizing unique optical technology and employing a multi-parabola mirror, an ideal surveillance area has been achieved. It monitors three-dimensional space with high density and efficiency. ■Easy Area Setting The sensor unit is equipped with an area selector and area setting chart on the back, making it easy to set the surveillance area.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor 3D Surveillance Type for 12m PA-8012

Passive Sensor 3D Surveillance Type for 12m PA-8012

Passive sensor that intelligently controls various functions.

■Optimal for use under harsh installation conditions Even when phenomena that are likely to cause malfunctions occur, such as small animals (mice, dogs, cats), stray light, drafts, and external noise, the dual twin effect ensures minimal impact. ■SC (Automatic Sensitivity Adjustment) Circuit Equipped with an ASC circuit that automatically sets the appropriate sensitivity based on the balance between room temperature and the intruder's body temperature. ■Reliable design resistant to radio interference By adopting a unique N.E. (Noise Eliminator) in circuit and mechanical design, effective measures against electrical noise entering from the line and noise propagating through the air are implemented. ■Alarm Memory Function By adding control contacts externally to the sensor, the activated sensor can be confirmed by the illumination of a display lamp. ■Alarm Indicator Lamp Control By adding control contacts externally to the sensor, the ON/OFF of the indicator lamp can be operated remotely. *It can also be controlled by a switch inside the sensor. ■Trustworthy and user-friendly design ● Low power consumption of 15mA when using DC12V. ● Equipped with a targeting area adjustment function that allows visual confirmation of the area.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-altitude installation passive sensor, three-dimensional surveillance type, PA-8410

High-altitude installation passive sensor, three-dimensional surveillance type, PA-8410

Due to its unique high-density surveillance area, installation in high places such as atriums and lobbies is possible.

■Unique surveillance area that can be installed at high locations This sensor can monitor from high places, which was difficult with conventional sensors. Its unique high-density surveillance area allows for installation at heights of 4m to 8m. The high-density surveillance area, composed of four reflective mirrors, can be used in locations with high ceilings such as atriums and event spaces, as well as under eaves in truck yards. ■Can be installed indoors and semi-outdoors With a rainproof structure, it can be installed not only indoors but also in semi-outdoor areas. It enables monitoring even in places where near-infrared beam sensors cannot be installed. ■Robust housing case It features a housing case made of AES resin, which improves impact resistance and weather resistance. This reduces the risk of damage in places like gymnasiums where ball games are played. ■Rainproof structure In locations where wind and rain can be severe, such as under building eaves, the excellent weather-resistant packing structure prevents water intrusion. (When performing exposed wiring, please use the included waterproof bushing or conduit for wiring.)

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor PA-4810A

Passive Sensor PA-4810A

Passive sensor for wall and corner installation using fuzzy theory.

■Adoption of Fuzzy Theory The two outputs from the newly developed dual twin element are divided by the CPU into two pieces of information: the temperature difference and shape difference between the detection object and the background. Using fuzzy theory, it accurately determines whether the detection object is a human or a small animal, and outputs an alarm. Even when phenomena that are likely to cause malfunctions, such as small animals (like mice), stray light, drafts, and external noise occur, the dual twin effect ensures that there is almost no impact. ■Ideal Surveillance Area Utilizing unique optical technology, a multi-parabola mirror is adopted. It monitors three-dimensional space with high density. ■Abnormal Alarm Function While the sensor is in a surveillance state, the built-in program allows the sensor itself to monitor the next functions. If an abnormality is detected, it notifies of the abnormality through continuous alarm output and continuous illumination of the alarm indicator light. ●Low Power Supply Voltage Abnormality… The newly developed CPU constantly monitors the power supply voltage provided to the sensor. If the power supply voltage drops below a certain level, the abnormal alarm is triggered. ●Equipment Abnormality… In the unlikely event that damage or disconnection occurs in the internal circuits or connections of the sensor, the abnormal alarm is triggered. ●Aiming Position Abnormality… After confirming the surveillance area, if the aiming device is forgotten to be returned, the abnormal alarm is triggered.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor 3D Surveillance Type PA-350

Passive Sensor 3D Surveillance Type PA-350

Compact and high-performance passive sensor for upper wall corners.

■High reliability achieved with newly developed CPU The CPU built into the sensor accurately controls detection and counting functions. ■Ideal surveillance area An additional surveillance area is added directly beneath the sensor, achieving a high-density surveillance area with no dead zones (insensitive areas). ■Reliable design resistant to radio interference Effective measures are taken against electrical noise entering from the line and noise propagating through the air through circuit and mechanical design. ■Simplified surveillance area setting The angle of the surveillance area can be easily adjusted by sliding the detection unit. ■Count setting switch A built-in count setting switch allows for switching between 2 counts and 4 counts depending on the installation location and intended use. ■User-friendly design ● Equipped with an operation indicator light for convenient operation confirmation (can be turned off permanently with a switch). ● Terminal connection type for convenient wiring. ● Simple and smart design.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor Passive Type Far Infrared Surface Surveillance Type PA-360

Passive Sensor Passive Type Far Infrared Surface Surveillance Type PA-360

Compact and high-performance passive sensor for upper wall and corner.

High reliability achieved by newly developed CPU The CPU built into the sensor accurately controls detection and counting functions. Ideal surveillance area An additional surveillance area is added directly beneath the sensor, achieving a high-density surveillance area without dead zones (insensitive zones). Reliable design resistant to radio interference Effective measures are taken against electrical noise entering from the line and noise propagating through the air through circuit and mechanical design. Simplified surveillance area settings The angle of the surveillance area can be easily adjusted by sliding the detection unit. User-friendly design ● Equipped with an operation indicator light for convenient operation confirmation (can be turned off permanently with a switch). ● Terminal connection for convenient wiring. ● Simple and smart design.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor Infrared Type Spot Surveillance Model PA-650

Passive Sensor Infrared Type Spot Surveillance Model PA-650

Passive sensor for installing on door frames and small walls, ideal for monitoring entrances, exits, and passageways.

■Ideal for Spot Surveillance This is a passive sensor for spot surveillance, installed at the doorways and small wall sections to catch intruders. ■Switchable Surveillance Areas The area can be switched between wide and narrow depending on the entrance size. *Wide Area: Width 2.4m (at height 3m) *Narrow Area: Width 1.2m (at height 3m) The depth area can also be adjusted at an angle between 5° to 25° from vertical. ■Convenient Features and User-Friendly Design ● Built-in adjustment volume for convenient sensitivity settings ● Wide range of power supply voltage (DC10.5V to 30V) ● LED for operation confirmation (Green LED lights up during alarm) ● Simple and smart design that fits the front mask.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Outdoor/Indoor Passive Sensor PIR-T15W(BL)

Outdoor/Indoor Passive Sensor PIR-T15W(BL)

Outdoor and indoor passive sensor that significantly reduces missed reports and malfunctions with its unique triple mirror system and signal processing method.

■Triple mirror that forms a unique area Equipped with three sets of optical units in the sensor. This is a new type of passive sensor that features twin-type elements (newly developed) in each unit. The area formed by the three sets of optical units significantly reduces false alarms and malfunctions due to its unique layout design. Additionally, the design resembles an outdoor light, and the internal structure allows for area adjustment (movable mirrors), making it difficult to infer the direction of the area from the appearance, thus enhancing security. ■Reduction of malfunctions caused by small animals By adopting independent detection units for each mirror, signal processing reduces malfunctions caused by small animals such as cats. Furthermore, by using the pet mode (only for three-dimensional vigilance type), it becomes possible to cancel out medium-sized dogs (approximately 50 cm in height), allowing for operation in homes with pets. Additionally, by attaching a bird stopper to the top, it becomes less likely for birds to perch, significantly reducing unexpected malfunctions.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Outdoor/Indoor Passive Sensor MS-12T-N

Outdoor/Indoor Passive Sensor MS-12T-N

Reduced false alarms with dual-direction AND detection in horizontal and downward areas! More stable security is now possible outdoors.

■ Adoption of 2-direction AND detection for horizontal area and downward area The detection method outputs a detection signal only when both the horizontal area and downward area detect something, which reduces false triggers caused by small animals like dogs and cats, as well as false triggers due to excessive detection area extension, enabling more stable security outdoors. ■ Outdoor installation possible It has a rainproof structure, allowing for outdoor installation. It can be mounted on walls and poles, so it does not limit the installation location. (Additional mounting brackets are required for pole installation.) ■ Day/night discrimination function Equipped with a day/night discrimination function that controls output based on surrounding brightness. It can operate only at night. (Adjustable from approximately 10lx to infinity) ■ Sensitivity adjustment volume It has a built-in sensitivity adjustment volume that allows fine-tuning of sensitivity according to the installation environment, application, and operating conditions. The sensitivity for detecting human bodies can be adjusted in the range of approximately 30% to 170%. ■ Convenient features and user-friendly design ● The power supply voltage ranges from 10.5 to 30V (no polarity). ● It has a count switching function that allows for changing the number of sensor counts (1 time/3 times). ● There is a tamper output on the main unit. ● It includes an operation indicator light for convenient operation confirmation (red LED).

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Outdoor/Indoor Passive Sensor 3D Detection Type PA-15W

Outdoor/Indoor Passive Sensor 3D Detection Type PA-15W

Outdoor passive sensor with adjustable angles for free positioning.

■Can be installed outdoors and semi-outdoors Due to its rainproof structure, it can be installed not only indoors but also outdoors and semi-outdoors. Moreover, it can be mounted on ceilings, walls, and poles, allowing for flexible installation locations. Additionally, the pitch of the mounting base is compatible with commercially available embedded boxes, enabling a neat installation. ■Fits well with exteriors With a novel design that has never been seen before, it perfectly fits into exterior coordination. Its smart design matches well in various locations, whether indoors or outdoors. ■Supports simple outdoor security This passive sensor can meet the simple security needs in places where near-infrared beam sensors cannot be installed or where the design of the exterior is prioritized. (However, please avoid using it for serious security or surveillance systems.) ■One-touch angle adjustment With a new type of angle adjustment mechanism, the sensor's angle can be adjusted up and down, left and right with just one touch. ■User-friendly design ● Equipped with an operation indicator light for convenient operation confirmation. (Lights up when detecting) ● Flexible installation with three types of options. ● Wide detection area (3D detection type 15m x 15m, linear detection type 30m)

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultra-compact infrared sensor, near-infrared type, PB-10NS

Ultra-compact infrared sensor, near-infrared type, PB-10NS

Ultra-compact infrared sensor of 1-beam type that can be installed in minimal space.

■Ideal for security around CD/ATM corners and windows/corridors This device can be used for various purposes, such as detecting residual individuals near financial institution CD/ATM machines, securing areas around electric shutters, and detecting passing objects near windows, corridors, toilets, and doors, as well as for integration with HA equipment. ■Ultra-compact control box The control box measures W:45mm H:120mm D:29mm, making it ultra-compact. It can be installed in various locations with minimal space. ■Two types in a series: opposing type and reflective type To accommodate various applications, two types have been developed in a series: opposing type (for 10m) and reflective type (for 4m). You can choose the model according to your needs. ■User-friendly design ● Built-in sensitivity adjustment volume allows for optimal sensitivity adjustment based on installation distance. ● Switchable a contact/b contact. ● The sensor head uses a one-touch installation type that can be mounted simply by drilling a hole and pushing it in. ● Both the projector and receiver can have their connecting cables cut to the necessary length, allowing for tidy wiring without the need to bundle them near the amplifier section.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultra-compact infrared sensor Near-infrared type PB-4RNS

Ultra-compact infrared sensor Near-infrared type PB-4RNS

Ultra-compact infrared sensor of 1-beam type that can be installed in minimal space.

■Ideal for security around CD/ATM corners and windows/corridors It can be used for detecting residual individuals near financial institution CD/ATM machines, securing areas around electric shutters, as well as for detecting passing objects near windows, corridors, toilets, and doors, making it suitable for a wide range of applications. ■Ultra-compact control box The control box measures W:45mm H:120mm D:29mm, making it ultra-compact. It can be installed in various locations with minimal space. ■Two types in a series: opposing type and reflective type To accommodate various applications, two types are available in a series: opposing type (for 10m) and reflective type (for 4m). You can choose the model according to your needs. ■User-friendly design ● Built-in sensitivity adjustment volume allows for optimal sensitivity adjustment based on installation distance. ● Switchable a contact/b contact. ● The sensor head uses a one-touch installation type that can be easily attached by drilling a pilot hole and pushing it in. ● Both the projector and receiver can have their connection cables cut to the necessary length, allowing for tidy wiring without the need to bundle them near the amplifier section.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultra-compact infrared sensor Near-infrared type PB-10TNS

Ultra-compact infrared sensor Near-infrared type PB-10TNS

A two-beam type ultra-compact infrared sensor that adopts a scanning method to prevent mutual interference.

■Realization of miniaturization of the control box section Achieved miniaturization of the control box section with dimensions of W: 45mm H: 120mm D: 29mm. It can be installed in various locations with minimal space. ■Series of two models: opposing type and reflective type To accommodate various applications, two models have been developed: the opposing type (for 10m) and the reflective type (for 4m). You can choose the model according to your needs. ■Prevention of mutual interference with scanning two beams The infrared light is scanned, preventing mutual interference of the infrared signals. ■AND/OR detection switching function Equipped with an AND/OR detection switching function, it can also be used as a single beam. Initially, it can be used as a single beam, and if needed, additional sensor heads can be added to use it as a double beam. ■Slim sensor head section with one-touch installation type The sensor head section adopts a one-touch installation type that can be installed simply by drilling a hole and pushing it in. ■User-friendly design ● Comes with a sensitivity adjustment volume that allows the sensor's sensitivity to be adjusted according to the installation distance. ● The connection cables for both the emitting and receiving sections can be freely cut.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultra-compact infrared sensor Near-infrared type (opposing type) PB-6Sa

Ultra-compact infrared sensor Near-infrared type (opposing type) PB-6Sa

A super compact infrared sensor with a miniaturized amplifier section and freely detachable connection cable.

■Ideal for security at CD and ATM corners, windows, and corridors The PB-6Sa/6Sb is an ultra-compact opposing infrared sensor with a separated amplifier section, and since the exposed part is only the sensor head (diameter 15mm), security for CD and ATM machines can be conducted discreetly. It can also be used for a wide range of applications such as detecting passing objects at windows, corridors, doors, and for integration into HA devices. ■Realization of compact amplifier section The amplifier section has been miniaturized to W:45mm H:94mm D:29mm. Additionally, the volume has been reduced by 40% (compared to our conventional products), allowing for flexible installation locations. ■Cuttable connection cables Depending on the installation location, the connection cables for both the transmitter and receiver can be cut to the necessary length, eliminating the need to bundle them near the amplifier section and allowing for neat wiring. ■User-friendly design ● The sensor head can be easily installed using a one-touch mounting method by simply drilling a 12mm hole and pushing it in. ● It features a built-in sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Sensors

IPROS Services
COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.