Sensors Product List and Ranking from 35 Manufacturers, Suppliers and Companies

Infrared Sensor [Salt Damage Countermeasure Product] PXB-100ATC

Achieve security tailored to the security level with two types of signals: "independent detection of upper and lower sections" and "simultaneous cutoff light detection of upper and lower sections."

■Independent Detection of Upper and Lower Sections When using AT output, the upper and lower sections function as independent two-beam sensors, allowing detection by simply obstructing one beam. *To prevent false detection from birds and other sources, the detection response time is set longer compared to when both sections are obstructed. ■AT and HF Output It features two types of detection outputs: AT output, which can detect passing through, and HF output, which only detects simultaneous obstruction of the four beams in the upper and lower sections, enabling appropriate vigilance based on the situation and environment. ■Synchronous Multi-Stage Vigilance By synchronizing the timing of the light emission and reception, it is possible to achieve a more reliable multi-stage vigilance. ■Strong Against Ambient Light (Dual Modulation Method) By adopting our unique dual modulation method for the infrared beam, we enhance the ability to distinguish between ambient light (such as sunlight and car headlights) and achieve reliable outdoor vigilance. ■Green Design It complies with the RoHS directive, which considers environmental impact. (Eliminates lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, and polybrominated diphenyl ethers) (RoHS: A directive established by EU member states that restricts the use of specific hazardous substances in electrical and electronic equipment.)

Company：セキュリティハウス
Price：Other

Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared sensor near-infrared beam interruption type PB-15T

Two-beam infrared sensor suitable for installation outdoors and indoors, ideal for simple uses such as home security.

■Simultaneous Two-Stage Beam Interruption Method By adopting an AND method that does not trigger an alarm unless both upper and lower infrared beams are interrupted simultaneously, false alarms caused by momentary interruptions with time delays, such as birds flying in or falling leaves, are significantly reduced. ■Modulation Frequency Switching Function This feature is effective when using multiple infrared sensors for linear surveillance or multi-stage alerts. By switching the modulation frequency of the infrared pulse beam between high and low, it is possible to avoid signal bypassing. ■Home Security It can also be used for home security applications such as windows and fence boundaries, as well as for simpler configurations. ■Wide Beam Pitch The beam pitch is set to approximately 240mm, which greatly reduces false alarms caused by birds or falling leaves. ■Detection Response Time Adjustment The detection response speed can be adjusted from 0.05 to 0.7 seconds using a volume control. By setting a longer detection response time, it becomes less likely to trigger false alarms from falling leaves. However, be cautious as setting it too slow may result in failing to detect humans. ■Others ● The detection range is 15m outdoors and 30m indoors. ● Horizontal adjustment of the infrared light axis is possible (vertical adjustment is not available). ● The wide light beam allows for easy axis adjustment.

Company：セキュリティハウス
Price：Other

Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Housing storage type infrared sensor PXB-100HF-KH

Evolved high-function PXB series housing storage type

■Housing Storage Type This is a dedicated housing case product, so it can be directly mounted onto the case. *Installing it directly outdoors may cause malfunctions. ■Significantly Reduced Malfunctions (Dual Modulation Method, Wide Pitch) By adopting our unique dual modulation method for the infrared beam, we enhance the distinguishability from stray light (such as sunlight and car headlights), achieving highly reliable outdoor surveillance. (It is not affected by changes in illumination of up to 50,000 lux.) Additionally, by widening the beam pitch compared to the conventional PB-F/HF series, we significantly reduce malfunctions caused by small animals like birds, resulting in even more stable operation. ■Easy-to-See Aiming Mechanism (Double Ring Aiming Mechanism) [Patent] The aiming device employs a double ring to improve visibility during optical axis adjustment. It provides an appropriate view when the eye is close or far from it. ■Strong Against Lightning (Enhanced Lightning Protection) To reduce damage from induced lightning, we have strengthened the surge resistance performance. Compared to the conventional PB-IN-HF series, it has approximately 10 times the surge resistance performance, allowing for safe use. (Compared to our previous models)

Company：セキュリティハウス
Price：Other

Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Low power consumption infrared sensor PXB-100SW

Low power consumption and capable of wireless operation, 4-stage high-power beam infrared sensor.

■Solar Power Compatible By combining the floodlight with a separately sold solar power unit, it can be used in locations where wiring from both sides is difficult, allowing for single-sided wiring only on the receiver side. Additionally, by adding a solar power unit and a contact input unit on the receiver side, it can support full wireless operation. Therefore, it is possible to maintain surveillance up to 100 meters even in locations where wiring work is challenging. ■Strong Against Lightning (Enhanced Lightning Protection) To reduce damage from induced lightning, surge resistance performance has been strengthened. *This does not guarantee against failures or malfunctions caused by lightning strikes. ■Structure Preventing Insects (Insect and Drip Proof Design) Using insect-proof bushings that envelop the electric wires and dedicated gaskets, it achieves dustproof, drip-proof, and insect-proof measures equivalent to IP65. The insect-proof bushing can be cut to fit the size of the wire, preventing the entry of insects and water from the wire entry point and protecting the circuit board from corrosion. ■Strong Against Ambient Light (Dual Modulation Method) By adopting our unique dual modulation method for the infrared beam, it enhances the ability to distinguish between ambient light (such as sunlight and car headlights), achieving reliable outdoor surveillance.

Company：セキュリティハウス
Price：Other

Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Combination Sensor COM-50XTH

A composite sensor that integrates infrared (dual beam opposing type) and microwave (opposing type).

Strong against harsh environments (Composite sensor) This composite type integrates a two-stage beam infrared sensor and a 24GHz microwave sensor, reducing malfunctions during adverse weather conditions such as fog, snow, and heavy rain. *The 24GHz microwave sensor complies with the domestic radio law as a "specific low-power radio station, wireless equipment for mobile detection sensors," so no application for a radio station license or any other procedures are required on the customer's side. Strong against lightning (Enhanced lightning protection) Surge resistance has been strengthened to reduce damage caused by induced lightning. *This does not guarantee protection against failures or malfunctions due to lightning strikes. Two models: "L" type and "H" type The microwave section has two frequency types: "L" type and "H" type. Therefore, mutual interference can be prevented when multiple units are installed directly on the line. *The infrared section can switch between four modulation frequencies using the function setting switch.

Company：セキュリティハウス
Price：Other

Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Combination Sensor for Outdoor Use, 50m - COM-IN-50HFL

Intelligent sensor that integrates infrared (4-beam opposing type) and microwave (opposing type).

■High-reliability composite sensor This is a composite sensor that integrates a four-beam infrared sensor and a 24GHz microwave sensor, achieving high reliability even in bad weather conditions. ■Two models: "L" type and "H" type The microwave section has two models, "L" type and "H" type, and the infrared section can switch between four modulation frequencies via a switch, preventing mutual interference when multiple units are installed in a straight line. ■No need for radio station license application This product falls under the category of "specific low-power radio stations, mobile detection sensor radio equipment" permitted by domestic radio laws, so no application or procedures for a radio station license are required on the customer's side. *The first domestic security-oriented opposing microwave sensor. ■Intelligent functions ● Four-stage modulation frequency switching: This feature demonstrates its effectiveness when conducting linear surveillance with multiple sensors or during multi-stage surveillance. By switching the frequency of the infrared pulse beam, mutual interference can be easily avoided. ● External environment diagnostic function: If the infrared light reception amount falls below a certain level due to adverse weather conditions (such as dense fog or heavy snowfall), an environmental deterioration signal will be output.

Company：セキュリティハウス
Price：Other

Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Combination Sensor for Outdoor Use, 50m - COM-IN-50HFH

Intelligent sensor that integrates infrared (4-beam opposing type) and microwave (opposing type).

■High-reliability composite sensor This is a composite sensor that integrates a four-beam infrared sensor and a 24GHz microwave sensor, achieving high reliability even in bad weather conditions. ■Two models: "L" type and "H" type The microwave section has two models, "L" type and "H" type, and the infrared section can switch between four modulation frequencies via a switch, preventing mutual interference when multiple units are installed along a straight line. ■No need for wireless station license application This product falls under the category of "specific low-power radio stations, wireless equipment for moving object detection sensors" permitted by domestic radio law, so no application or procedures for a wireless station license are required from the customer. *The first domestic security-oriented opposing microwave sensor ■Intelligent features ●Four-stage modulation frequency switching This feature is effective when conducting linear surveillance with multiple sensors or during multi-stage surveillance. By switching the frequency of the infrared pulse beam, mutual interference can be easily avoided. ●External environment diagnostic function If the infrared light reception amount falls below a certain level due to bad weather (dense fog, heavy snowfall), an environmental deterioration signal will be output.

Company：セキュリティハウス
Price：Other

Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Combination Sensor COM-IN-100AH

Intelligent sensor that integrates infrared (4-beam opposing type) and microwave (opposing type).

■High-reliability composite sensor This is a composite sensor that integrates a four-beam infrared sensor and a 24GHz microwave sensor, achieving high reliability even in bad weather conditions. ■Two models: "L" type and "H" type There are two models with the microwave section operating at different frequencies: "L" type and "H" type. The infrared section can switch between four modulation frequencies using a switch, preventing mutual interference when multiple units are installed along a straight line. ■No need for wireless station license application This product falls under the category of "specific low-power radio stations, wireless equipment for mobile detection sensors" permitted by domestic radio laws, so no application or procedures for a wireless station license are required from the customer. *The first domestic security-oriented opposing microwave sensor. ■Intelligent features ●Four-stage modulation frequency switching This feature is effective when multiple sensors are used for linear surveillance or during multi-stage alerts. By switching the frequency of the infrared pulse beam, mutual interference can be easily avoided. ●External environment diagnostic function If the infrared light reception amount falls below a certain level due to bad weather (such as dense fog or heavy snowfall), an environmental deterioration signal will be output.

Company：セキュリティハウス
Price：Other

Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Glass Break Sensor Dual-Type Ultrasonic Sound Collection Method GS-1000

Sharp detection performance! Ultrasonic sound collection glass break sensor.

■Reliable Detection of Glass Breakage Sounds Sharp pickup of the unique ultrasonic sounds generated during glass breakage, with precise signal processing based on frequency and sound pressure. External noise is shut out. ■Environmental Check Function Equipped with a mode switch and indicator light for easy environmental checks of the installation location and confirmation of operation. ■Easy Installation with Flexible Placement The alert area can be adjusted up to a maximum of 8m vertically and 7m horizontally, with a wide variable range of 45°, allowing for easy installation on walls. Additionally, it is a non-contact type that can monitor multiple glass panels with one unit, making installation and maintenance easy without compromising aesthetics. ■Alarm Memory Function When glass breakage sounds are detected, the alarm indicator light (red LED) remains lit for approximately 60 minutes, making it easy to identify the location of the alarm even when multiple units are installed. ■Convenient Features and User-Friendly Design ● Comes with a sensitivity adjustment volume that can be set to optimal sensitivity. ● A glass checker for simulation: EG-2000 (optional) is also available. ● Can operate over a wide voltage range (DC10.5V to 30V). ● Compact body and smart design that do not compromise the interior of the installation location.

Company：セキュリティハウス
Price：Other

Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Glass Breakage Sensor Non-Contact Ultrasonic Collection Method GS-1100

Sharp detection performance! Ultrasonic sound-collecting glass break sensor.

■Reliable Glass Break Detection It sharply picks up the unique ultrasonic sound generated during glass breakage and accurately processes the signal according to frequency and sound pressure, shutting out external noise. ■Environmental Check Function Equipped with a mode switch and indicator light for easy environmental checks of the installation location and operation confirmation. ■Easy Installation with Flexible Placement With a vertical detection range of 7m and horizontal range of 8m, and a wide variable range of 80°, it can be easily installed on walls. Additionally, it is a non-contact type that can monitor multiple glass panels with one unit, making installation and maintenance easy without compromising aesthetics. ■Alarm Memory Function When glass breakage sound is detected, the alarm indicator light (red LED) will blink for about 3 minutes and then continue to stay lit for 47 minutes, allowing for easy identification of the alarm location even when multiple units are installed. ■Convenient Features and User-Friendly Design ● Comes with a sensitivity adjustment volume that can be set to optimal sensitivity. ● A glass checker for simulation: EG-2000 (optional) is also available. ● Operates on a wide voltage range (DC9V to 30V). ● Compact body and smart design that does not compromise the interior of the installation location.

Company：セキュリティハウス
Price：Other

Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Stick Sensor W・B・BL SK-780

Perfect for home security! It is now possible to secure jalousie windows, fixed windows, casement windows, and inward-tilting windows.

■Can be installed on jalousie windows ●Can be attached to jalousie windows that do not open and close. ●Outputs an alarm signal when an intruder removes the pole of the stick sensor installed on the window frame. ■Compatible with various devices ●Since it is a switch type that does not require power, it can be connected to various devices such as receiving control devices, general-purpose bus line systems, and wireless devices. ■User-friendly design ●The pole fixing device is available in three colors to match the window frame: White (W), Bronze (B), Black (BL) ●The pole length is available in three sizes to match the window frame: For 400mm, 600mm, and 780mm.

Company：セキュリティハウス
Price：Other

Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fence Sensor (for 100m) D7K-100 for 100m

It is a fence sensor that detects intruders from the perimeter fence and conducts security measures.

■Surface surveillance method monitoring the entire fence (net part) By adopting the surface surveillance method, more stringent security is possible. Additionally, it is an optimal sensor for dual surveillance when used in conjunction with infrared sensors at important facilities (such as power plants). ■Not affected by snow, dense fog, frost, etc. It is an optimal sensor for locations where infrared surveillance is difficult. ■Simple hardware configuration It is an optimal sensor for locations where infrared surveillance is difficult. ■Reduction of construction costs and shortening of construction period By simply securing the sensor cable directly to the fence with zip ties (accessories included), costs are kept down, leading to a shortened construction period.

Company：セキュリティハウス
Price：Other

Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fence Sensor (for 50m) D7K-50

It is a fence sensor that detects intruders from the perimeter fence and performs security monitoring.

■Surface surveillance method monitoring the entire fence (net part) By adopting the surface surveillance method, more stringent security is possible. It is also an optimal sensor for dual surveillance when used in conjunction with infrared sensors at important facilities (such as power plants). ■Not affected by snow, dense fog, frost, etc. This sensor is ideal for installation locations where infrared surveillance is difficult. ■Simple hardware configuration The simple configuration allows for system construction tailored to customer requirements. ■Reduction of construction costs and shortening of construction period Since the sensor cables are simply secured to the fence with cable ties (included), it helps to reduce costs and shorten the construction period.

Company：セキュリティハウス
Price：Other

Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Tension Sensor ST-100

It is a tension-type fence sensor that detects intruders from the perimeter fence and performs security monitoring.

■Marker display function that clearly indicates the alarm location The tension-type fence sensor at the activated location is displayed with a marker, allowing for immediate identification of the alarm location. The marker display remains even after the tension sensor automatically resets. ■Ideal for use in cold regions This sensor is perfect for use in cold areas where infrared monitoring is difficult. It is not affected by rain, snow, fog, or wind. ■Easy installation with a single loop power supply method Wiring work is simple as it only requires fixing and terminal connection within the adjuster. ■Simple structure with no worries about false alarms or malfunctions It has a simple structure that generates an alarm due to temporary disconnection caused by weight or tension applied to the alarm line. ■Outstanding durability The alarm line uses stainless steel twisted wire that is resistant to disconnection and rust.

Company：セキュリティハウス
Price：Other

Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Microwave Sensor MW-100BL

Microwave sensors that demonstrate high reliability even in harsh environments.

■ Performance in Adverse Conditions Using 24GHz microwaves, it remains stable even in adverse conditions such as rain, snow, and fog, and is not affected by flying objects like birds or pieces of paper. ■ Two Models: "L" Type and "H" Type There are two models available, "L" type and "H" type, which helps prevent mutual interference when multiple units are installed in a straight line. ■ No Application Process for Radio Station License Required This product falls under the category of "Specified Low Power Radio Station, Wireless Equipment for Mobile Detection Sensors" permitted by domestic radio law, so no application or procedures for a radio station license are required from the customer. *First in Japan as a security-oriented opposing microwave sensor. ■ Built-in Monitor Output Function To facilitate angle adjustments during installation and regular inspections, a monitor output is built-in. By using commercially available testers, angle adjustments can be made easily and reliably. ■ Built-in AGC Circuit It has a built-in AGC circuit that automatically maintains appropriate sensitivity according to the surrounding environment. ■ Built-in Adjustment Mode Function After setting, switching to adjustment mode allows for quick operation checks and monitoring of output voltage.

Company：セキュリティハウス
Price：Other

Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Sensors Product List and Ranking from 35 Manufacturers, Suppliers and Companies

Sensors Manufacturer, Suppliers and Company Rankings

Sensors Product ranking