Sensors Product List and Ranking from 626 Manufacturers, Suppliers and Companies | IPROS

Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.

Sensors Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.

  1. WorldLink&Company SkyLink Japan Kyoto//Other construction industries
  2. ビーイーエージャパン Kanagawa//Building materials, supplies and fixtures manufacturers
  3. セキュリティハウス Okayama//Electrical equipment construction business
  4. 4 ホトロン Tokyo//Building materials, supplies and fixtures manufacturers
  5. 5 GRIFFY Tokyo//others
Go to Company Ranking

Sensors Product ranking

Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.

  1. Drone/UAV Surveying LiDAR [Case studies available & demonstrations possible] WorldLink&Company SkyLink Japan
  2. Ondroid Temperature and Humidity Measurement System [NETIS Registered] GRIFFY
  3. Rear Confirmation Sensor "Truck Sonar"
  4. 4 Passive Sensor Surface Surveillance Type for 30m PA-8030 セキュリティハウス
  5. 5 Rectifying function equipped, stationary composite Pitot tube sensor New Aero Eye ウエットマスター

Sensors Product List

1891～1920 item / All 2913 items

Displayed results
Hokkaido Univ. Technology :High-sensitivity single-sided pressure sensor with depth detection：HK24-002

Hokkaido Univ. Technology :High-sensitivity single-sided pressure sensor with depth detection：HK24-002

From telemedicine to industrial applications, real-time tactile information

■Social Challenges and Market Background In telemedicine, the inability to perform palpation limits diagnostic accuracy. Conventional pressure sensors are costly, lack sufficient sensitivity, and cannot measure depth. As populations age and regional disparities in healthcare access grow, remote diagnostic tools with palpation capabilities are in high demand. The global tactile sensor market is projected to grow at a compound annual growth rate (CAGR) of over 10%. ■Technology Overview This technology features a single-sided wiring structure that achieves high sensitivity while reducing manufacturing costs to approximately one-tenth of conventional designs. It enables real-time measurement of pressure, depth, and viscosity, and its fingertip-mounted form factor allows seamless use in clinical or field settings. Applications extend from medical and healthcare to industrial inspection and product quality control. ■Advantages Over Conventional Technology ＊For details, please refer to the PDF

  • others
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tohoku Univ. Technology：Diaper sensors：T24-065

Tohoku Univ. Technology：Diaper sensors：T24-065

Sensors with high body affinity and capable of identifying excreta

The market for "smart diapers" that detect the state of diapers and inform when to change diapers is expanding. Conventional diaper sensors that measure humidity or NH3 gas are known, but they only detect urine and cannot distinguish between urine and feces. In addition, in semiconductor gas sensors, since the operating temperature of the sensor is high, it is necessary to heat the sensor chip. The present invention solves the above problem and provides a diaper sensor that can distinguish urine and feces at room temperature. Moreover, by using a flexible substrate, a device that is thin, small, flexible, and highly biocompatible can be realized.

  • others
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tohoku Univ. Technology：High-sensitivity temperature sensor：T18-105

Tohoku Univ. Technology：High-sensitivity temperature sensor：T18-105

Ultrasensitive microscale temperature sensing—flexible design possible

In biotechnology and healthcare, it is crucial to detect small temperature changes and heat generation with high sensitivity. This invention achieves remarkable temperature sensitivity by using ionic liquids with a high Seebeck coefficient in thermocouples, far surpassing conventional solid-state materials. The device employs a microfluidic chip, allowing the liquids to be physically separated but electrically connected, enabling flexible sensor structures. This system makes it possible to conduct ultra-sensitive temperature measurements even on curved and irregular surfaces, expanding the practical utility of temperature sensing well beyond what is possible with traditional solid-state sensors.

  • others
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D Orientation Sensor "Magenta I"

3D Orientation Sensor "Magenta I"

A compact and lightweight true north compass allows for accurate azimuth measurement and installation without being affected by disturbances in the geomagnetic field from buildings, towers, etc.

"Magenta I" is a sensor device that measures the spatial direction of measurement target equipment (such as antennas for mobile base stations). Compared to conventional true north compasses, it is a compact and lightweight product that is easy to handle. Since it is necessary to measure the position of the sun, its use is limited in cloudy or rainy weather; however, it can be avoided by conducting preliminary measurements during clear weather. 【Features】 ■ Capable of accurate azimuth measurement and installation without being affected by geomagnetic disturbances ■ Compact and lightweight device convenient for transport and measurement ■ Excellent price competitiveness ■ Easy management of measurement data ■ Reduces costs for wireless network construction ■ Improves wireless network performance *For more details, please refer to the PDF document or feel free to contact us.

  • Measurement and Inspection
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Easily IoT-enable with the desired sensor using Daisen eForce IoT MOS.

Easily IoT-enable with the desired sensor using Daisen eForce IoT MOS.

Easily IoT-enable with the sensors you want to use.

■Compatible with various sensors: Multiple sensors can be installed as needed, allowing for expansion based on the situation. ■Compatible with various wireless technologies: Sensor data can be transmitted wirelessly using WiFi/BLE. ■Cloud compatible: Capable of data logging to the cloud.

  • others
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wind Speed Sensor "SS 20.250"

Wind Speed Sensor "SS 20.250"

An all-around player in strong wind speed sensors for measuring light breezes.

The wind speed sensor "SS 20.250" is a compact, high-precision, and high-functionality all-round player that excels in measuring light wind speeds. It contributes to energy-saving control, such as monitoring the wind speed of fans and blowers. For more details, please contact us or download the catalog.

  • Anemometer
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Compressed air flow sensor "SS 20.261"

Compressed air flow sensor "SS 20.261"

We enhance the efficiency of the pneumatic system (compressor) to significantly reduce costs and power consumption. Compatible with compressed air at 0.8 MPa.

The compressed air flow sensor "SS 20.261" enhances the efficiency of pneumatic systems, enabling cost reduction and energy savings. It can measure wind speeds of up to 90 m/s and display a maximum flow rate of 74,372 m³/h in standard mode (normal mode is also possible). The maximum pipe diameter is 600A, and the minimum diameter is 25A. It can be used in packaging machines and injection molding machines, among others. For more details, please contact us or download the catalog.

  • Anemometer
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-temperature wind speed sensor "SS 20.650"

High-temperature wind speed sensor "SS 20.650"

Compatible with high-temperature wind speeds of +350℃. Capable of measurement from 0.2m/s with a high response rate. Ideal for checking energy efficiency in industrial furnaces and similar applications.

The high-temperature wind speed sensor "SS 20.650" is capable of measuring high-temperature wind speeds up to +350℃, with a fast response time that allows measurements from 0.2 m/s, and it is maintenance-free. It can be used for continuous measurement of wind speed and air volume in industrial furnaces, helping to check energy efficiency. For more details, please contact us or download the catalog.

  • Anemometer
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wind Speed Switch "SS 20.200/SS 20.201"

Wind Speed Switch "SS 20.200/SS 20.201"

Wind speed switch for air/gas, with a sensor head designed to be resistant to dirt.

The wind speed switch "SS 20.200/SS 20.201" features a mass flow type sensor head that is resistant to dirt and is omnidirectional. It is an excellent sensor for detecting light wind speeds, suitable for air/gas applications. For more details, please contact us or download the catalog.

  • Anemometer
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Dew Point Temperature Sensor "FA400"

Dew Point Temperature Sensor "FA400"

It is a dew point temperature sensor with measurement display function and alarm relay function.

The FA400 is a dew point temperature sensor equipped with measurement display and alarm relay functions, making it ideal for refrigeration, membrane, and adsorption dryers. It is the successor model to the FA200, which has a strong sales record worldwide. The threshold can be easily set using keypad operation. 【Specifications】 ○ Measurement Range: -80 to +20°C td, -60 to +30°C td -20 to +50°C td, 0 to 100% RH ○ Accuracy: ± 1°C (+20 to -20°C td) ± 2°C (-20 to -50°C td) ± 3°C (-50 to -80°C td) ○ Pressure Resistance: -1 to 50 bar Special specifications up to 35 MPa ○ Power Supply: 24 VDC (16 to 30 VDC) ○ Protection Class: IP 65 For more details, please contact us or download the catalog.

  • Other measuring instruments
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Plastic Ultra-Lightweight Air Duster "Joplus Star 2"

Plastic Ultra-Lightweight Air Duster "Joplus Star 2"

First 50 customers will receive a sample! Ultra-lightweight air duster that is easy to use.

The "Joplus Star 2" is an ultra-lightweight plastic air duster weighing only 90g, making it easy to handle even during long hours of work. It can be used for drying, cooling, and cleaning with air blow, or for air injection during packaging and packaging processes. 【Features】 ● Ultra-lightweight at just 90g, allowing for extended use ● Less likely to scratch objects even upon contact ● Lever type that fits comfortably in the hand and reduces fatigue *If you would like a sample, please feel free to contact us through the inquiry form.

  • cleaning
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Metal pass sensor *Demo available

Metal pass sensor *Demo available

A sensor suitable for detecting the passage of tiny metals.

Omron discontinued product "F2LP" revival item This sensor is suitable for detecting the passage of tiny metals. Please use it for detecting metal foreign objects in powders and foods, detecting needle contamination in fabric products, and for supply and discharge detection of screws and metal parts. In addition to output settings such as switching between NO and NC and toggling the timer, it also has adjustment functions such as cable length switching, sensor head size switching, sensitivity adjustment, and mutual interference prevention. *Equipment is available for loan!! Please feel free to contact us. *For more details, please download the PDF or feel free to contact us.

  • others
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Metal detection sensor "LMS Series" *Sample loan available

Metal detection sensor "LMS Series" *Sample loan available

Detection of tiny metals! Can be used by inserting a hose. *Demo units are available for loan.

The "LMS Series" is a metal detection sensor that allows for easy detection of metal foreign objects in powders, food, and other materials, as well as the detection of broken needles in fabric products, and the supply and discharge detection of screws, cutting chips, and metal parts. It has excellent environmental resistance (IP67) and is suitable for counting metals and detecting contamination. 【Features】 ■ Detects small metals ■ Four types of sensor heads can be selected according to the detection area ■ Frequency switching is possible to prevent mutual interference ■ Available with a flange (special application type) ■ Excellent environmental resistance (IP67) *For more details, please refer to the PDF document or feel free to contact us.

  • Other analytical equipment
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Liquid level sensor: Simply attach it from the outside of the container to linearly detect the liquid level.

Liquid level sensor: Simply attach it from the outside of the container to linearly detect the liquid level.

By simply attaching the film electrode to the outside of a resin tank or glass container, the liquid level inside the container can be detected linearly. *Sample available for loan.

The "CLA Series" is a capacitive liquid level sensor that can detect liquid levels linearly without touching the liquid. It outputs an analog signal according to the monitoring level of the internal liquid. Control signals can also be outputted up to 4 points, and since the electrodes are transparent, you can check the contents when applied to a transparent tank. 【Features】 ■ Analog output + up to 4-point control possible ■ Flexible electrodes for easy installation ■ Non-contact detection ■ Capable of detecting powders and granules ■ Can be used simply by applying it to a gauge tube or glass viewing window *For more details, please refer to the PDF document or feel free to contact us.

  • glue
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Kameoka Electronics Co., Ltd. Company Profile

Kameoka Electronics Co., Ltd. Company Profile

We provide integrated production from the design and development of various sensors to parts procurement, manufacturing, and shipping!

Kameoka Electronics Co., Ltd. is a trusted EMS company for major sensor manufacturers, leveraging reliable quality to reflect customer needs in our products, and we have established a system to provide sensors that are easier to use and more in demand. Based on the principle of "Quality First," we provide products that satisfy our customers throughout the entire process of development, production, and shipping. 【Business Overview】 ■ EMS Business (Contract Manufacturing Services) - Design and development tailored to needs - Consistent production system - Thorough quality control and quality assurance ■ In-house Product Development Process - Understanding technical needs → Research and development, experimentation → Proposals → Development and design → Support *For more details, please refer to the PDF materials or feel free to contact us.

  • others
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Capacitance-type Liquid Level Sensor "CLA Series" Use Cases

Capacitance-type Liquid Level Sensor "CLA Series" Use Cases

We will solve your on-site problems! Here are examples of using capacitive liquid level sensors. Demo units are available for loan!

The capacitive liquid level sensor "CLA series" that we handle will solve your on-site problems. If you are struggling with "I want to manage liquid levels with sensors instead of visual management," this product offers analog output and can control up to four points. It outputs an analog signal according to the monitoring level of the internal liquid. It can also output control signals for up to four points, and since the electrodes are transparent, you can check the contents when attached to a transparent tank. In the PDF materials, we introduce several other use cases with images. 【Use Cases (Partial)】 ■ It is difficult to install the sensor without processing because the shape of the tank is fixed. → The electrodes are flexible, making installation easy. ■ Slurry adheres to the sensor and prevents operation; the sensor corrodes due to chemicals. → Detection can be done non-contact. ■ I want to manage the remaining amount of not only liquids but also powders and resin pellets. → Detection of powders and granules is possible. *For more details, please refer to the PDF materials or feel free to contact us.

  • Other measuring instruments
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Capable of detecting liquid level without touching the liquid【Capacitive Liquid Level Sensor】

Capable of detecting liquid level without touching the liquid【Capacitive Liquid Level Sensor】

This is a sensor that can detect the liquid level inside a non-metallic container with a resolution of millimeters simply by attaching a film-type sensor to the outside of the container. *Free demo units available for loan.

This document explains cases where capacitive liquid level sensors have been used to solve common problems encountered in the field. A capacitive liquid level sensor is a device that can linearly detect liquid levels in millimeter units without coming into contact with the liquid by simply attaching a film-type sensor to the outside of a non-metallic container. 【Product Features】 ■ Transparent Film Electrode The electrode is transparent, allowing visibility of the contents even when attached to a transparent tank. ■ Analog Output The liquid level inside the tank is output as an analog voltage of 1–5V or a current of 4–20mA. ■ Flexible Electrode The electrode is made of a flexible film, allowing it to be installed not only on flat surfaces but also wrapped around cylindrical containers and pipes. ■ Non-contact Detection of Liquids By simply attaching the electrode to the outside of a pipe or tank, it can detect the liquid without contact. ■ Capable of Detecting Low Dielectric Constant Oils It can detect oils and silicones that are difficult to detect with other capacitive sensors. *Currently offering a collection of case studies and a document detailing the differences between our products and existing technologies in water level measurement! You can view it immediately via PDF download.

  • Other measuring instruments
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[CLA Case] Ink Level Detection for Printing Machines [Case Study of a Printing Equipment Manufacturer]

[CLA Case] Ink Level Detection for Printing Machines [Case Study of a Printing Equipment Manufacturer]

Using the liquid level sensor "CLA"! Introducing a case study on detecting ink remaining in printing machines.

We would like to introduce a case of ink level detection in a printing machine using the non-contact liquid level sensor "CLA," which can be installed on various tanks due to its electrodes being compatible with PET film. (Detected substance: ink) The printing equipment manufacturer faced challenges because optical methods cannot detect ink levels due to the color of the ink. They desired a sensor that could be easily attached to tanks, making it suitable for mass production and easy maintenance later on. Therefore, the non-contact "CLA" was adopted. By installing it in a way that adheres to the outside of the tank, it has become possible to manage the ink liquid level non-contactly. 【Current Challenges and Requirements】 - The printing equipment is equipped with a sensor that can manage the liquid level of the ink tank. - Optical methods cannot detect levels due to the color of the ink. - A sensor that can be easily attached to tanks, making it suitable for mass production and easy maintenance later on, is preferred. *For more details, please refer to the PDF document or feel free to contact us.

  • Other measuring instruments
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[CLA Case] Management of Antifoam Liquid Level in Water-Soluble Waste Liquid Treatment System [Non-Contact]

[CLA Case] Management of Antifoam Liquid Level in Water-Soluble Waste Liquid Treatment System [Non-Contact]

Using the liquid level sensor "CLA"! Introducing a case study on the treatment system for water-soluble waste liquids at a printing peripheral equipment manufacturer.

We would like to introduce a case study on the management of the liquid level of a defoaming agent in a water-soluble waste liquid treatment system using the non-contact liquid level sensor "CLA," which can be installed on various tanks due to its electrodes being made for PET film. (Detection target: defoaming agent) The printing peripheral equipment manufacturer was concerned about sensor degradation with contact-type sensors, as the timing of failures was unpredictable and maintenance could become frequent. They faced the challenge of needing a sensor that could be easily installed on tanks, which would facilitate mass production and make future maintenance easier. As a solution, the non-contact "CLA" was adopted. As a result, it can be easily attached from the outside of the tank, ensuring mass production capability, and during maintenance, it can simply be replaced from the outside of the tank, making maintenance straightforward. 【Current Challenges and Requests】 ■ With contact-type sensors, degradation is a concern, and the timing of failures is unpredictable, leading to potential frequent maintenance. ■ A sensor that can be easily installed on tanks is preferred, as it facilitates mass production and makes future maintenance easier. *For more details, please refer to the PDF document or feel free to contact us.

  • Other measuring instruments
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[CLA Case] Liquid level sensor that can be mounted on a φ10 pipe

[CLA Case] Liquid level sensor that can be mounted on a φ10 pipe

Can be installed with a thin pipe, capable of detecting a liquid level of 150mm! Custom CLA liquid level sensors can be manufactured. *Sample available for loan.

We would like to introduce a customized case of our non-contact liquid level sensor "CLA," which can be installed in various tanks due to its electrodes being suitable for PET film. A company in the automatic equipment industry expressed interest in adopting our "CLA," but they faced an issue with installation due to the narrow pipe size. Although there are products that can be installed in a φ10 narrow pipe, they reported that the detectable liquid level was only 40mm, leading to their request. In response, we customized the electrode part of the CLA liquid level sensor. (CLA liquid level sensor: CLA-D10P150) By sharing electrodes from other products and customizing them into a non-contact type, we enabled the detection of a liquid level of 150mm in a φ10 pipe. 【Current Issues and Requests】 ■ They want to adopt our CLA liquid level sensor, but cannot install it due to the narrow pipe size. ■ While there are products that can be installed in a φ10 narrow pipe using our CLA liquid level sensor, the detectable liquid level is only 40mm, which is too short. *For more details, please refer to the PDF document or feel free to contact us.

  • Other measuring instruments
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[CLA Case] Solving Installation Issues through Standard Electrode Modification [Customization]

[CLA Case] Solving Installation Issues through Standard Electrode Modification [Customization]

Custom product of CLA-D10P40 manufactured. Solutions for issues with the code extraction part have been addressed. *Samples of the custom product are available for loan.

We would like to introduce a customized case of the non-contact liquid level sensor "CLA," which can be installed in various tanks due to its electrodes being made of PET film. A customer from an automotive parts company encountered issues with the standard model "CLA-D10P40" already adopted for managing the liquid level of epoxy resin. The straight alignment of the cable exit with respect to the electrode caused the cable to be in the way after installation. Additionally, since the cable exit position is in a straight line from the electrode, it became an obstruction during equipment cleaning, leading to their request. Therefore, we customized the electrode by making the cable exit vertical while maintaining the same performance and functionality. 【Current Issues and Requests】 ■ Issues arose with the standard model "CLA-D10P40" already adopted for managing the liquid level of epoxy resin. ■ The straight alignment of the cable exit with respect to the electrode caused the cable to be in the way after installation. ■ The cable exit position being in a straight line from the electrode became an obstruction during equipment cleaning. *For more details, please refer to the PDF document or feel free to contact us.

  • Other measuring instruments
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Information] Differences between our products and existing technologies in water level gauges.

[Information] Differences between our products and existing technologies in water level gauges.

We also include the novelty and uniqueness of CLA, as well as its benefits! It is presented clearly in a table.

This document introduces the differences between our products and existing technologies in water level gauges. We provide a clear comparison of six categories, including our capacitive type, ultrasonic type, optical type, float type, immersion type, and capacitive type, based on six criteria: principle, contact or non-contact with the detected object, output (possibilities) in analog and ON/OFF, installation work, and lifespan. It also includes information on the novelty and uniqueness of CLA, as well as the benefits of CLA. [Contents] ■ Differences between our products and existing technologies in water level gauges ■ Novelty and uniqueness of CLA ■ Benefits of CLA *For more details, please refer to the PDF document or feel free to contact us.

  • Other measuring instruments
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Video] Introduction of the operation status using a demo unit of 'CLA-D10P40'

[Video] Introduction of the operation status using a demo unit of 'CLA-D10P40'

Introducing in a video! A non-contact capacitive liquid level sensor capable of detecting micro-capacity levels for scientific analysis equipment.

We will introduce the operating status of the "CLA-D10P40" using a demo unit in a video. This product captures even minute changes of 10pF without missing them. When there are no external influences such as temperature changes, it can also measure capacitance changes below 10pF. If you are interested, please take a look at the video. 【Features】 ■ Mini size suitable for test tubes and similar applications ■ Capable of measuring capacitance changes below 10pF ■ Detection of micro-capacitance levels for scientific analysis instruments ■ Detection of cartridge remaining levels for dispensers ■ Operating temperature range: 0 to 40℃ *For more details, please refer to the PDF document or feel free to contact us.

  • Other measuring instruments
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cellular Communication Water Infiltration Detection Sensor 'KAMEKER-FA'

Cellular Communication Water Infiltration Detection Sensor 'KAMEKER-FA'

Detect flooding caused by spring water at construction sites and notify via LINE! This enables quick responses even when you are not on-site during nights or holidays.

- For monitoring construction sites at night and on holidays: "KAMEKER-FA" detects flooding at construction sites using sensors and notifies you via LINE even when you are at a remote location during nights and holidays. It can also be used to prevent submersion of machinery at underground construction sites, such as shield machines. - No installation work or power supply required: Since it is battery-operated and does not require extensive installation work, it can be reinstalled each time the site changes. - Installation inside shafts is also possible: Its compact and portable design allows for installation in any location. (Note: Signal confirmation is necessary. There is a track record of use in shafts approximately 20 meters deep.) <Product Overview> Sensors installed at any location will quickly notify you via LINE when flooding is detected. Additionally, the location information of the flooded sensors will be displayed in red on the map opened in the app. <Product Highlights> 1. When flooding is detected, it sends a LINE notification and simultaneously visualizes the flooded location on the map. 2. It operates on batteries and uses cellular communication, eliminating the need for power and network installation. No civil engineering work is required for installation, allowing it to be set up anywhere. 3. It can be introduced at a low cost. 4. It uses commercially available batteries, making maintenance easy.

  • Security Sensor Systems
  • Other security systems
  • Emergency alarm system
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
"Water immersion detection sensor" Notifies via LINE! Contributes to BCP measures for heavy rain and flooding!

"Water immersion detection sensor" Notifies via LINE! Contributes to BCP measures for heavy rain and flooding!

Quickly notify about water damage such as flooding. Introducing examples from supermarkets, commercial facilities, and factory premises! <Published in the Cabinet Office's collection of private sector examples for national resilience>

In recent years, localized heavy rainfall has frequently caused water damage such as road flooding and internal water inundation. Supermarkets, home centers, and commercial facilities located in low-lying areas are often affected by flooding. This document includes case studies on the use of the flood detection sensor "KAMEKER-FA." We present four cases that contributed to disaster reduction. Please refer to the download button for more information. ★ We are also distributing materials that introduce the background of this product's development. This is part of the content published in April 2021 by the Cabinet Secretariat's "Collection of Private Sector Examples for National Resilience." *For more details about the product, please feel free to contact us.

  • others
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Renewal New Product] Liquid Level Sensor CLA 'CLA-A04'

[Renewal New Product] Liquid Level Sensor CLA 'CLA-A04'

Non-contact liquid detection and volume management made easier! New products in the CLA series that can be set up in 3 steps!

The non-contact capacitive liquid level sensor 'CLA Series' has been renewed with the new product 'CLA-A04' amplifier and released! The setting method has been changed to button operation, making initial setup and reconfiguration much easier! 【Changes from the previous model】 ■ Sensitivity setting via volume adjustment has been changed to button operation for easier configuration ■ Can be wired to push-button switches and output units for remote setting ■ The size of the amplifier has been reduced for easier integration into control panels ■ Compatible with all CLA sensors By combining it with a communication device, you can monitor liquid levels in real-time from a distance. This can reduce the time spent on visual checks, digitize daily liquid usage data, and enable quick responses to abnormal situations such as overflow or liquid leaks. ⇩ There is an explanatory video showing the initial setup and liquid level monitoring ⇩

  • glue
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Sunbelt

Sunbelt

A belt that quickly eliminates static electricity!

The Sunbelt is a belt that removes static electricity from car seats, OA operator chairs, and more. It helps prevent electric shocks caused by static electricity and prevents malfunctions of OA equipment. For more details, please contact us or download the catalog.

  • others
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Electrostatic countermeasure goods: Keychain, Dendron mini, Removal ring

Electrostatic countermeasure goods: Keychain, Dendron mini, Removal ring

Items for static electricity measures to reduce unpleasant electric shock.

Introduction of anti-static products: "Anti-static Keychain," "Dendron Mini," and "Static Electricity Removal Ring." For more details, please contact us or download the catalog.

  • others
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Static electricity removal ionized air duster

Static electricity removal ionized air duster

Upgrade the dust-blowing function of commercially available air dusters!

The static electricity removal ionized air duster upgrades the dust-blowing function of commercially available air dusters. The ionized air effectively removes dust, allowing for quicker processing compared to regular air duster cans, which also prolongs the life of the can's air. For more details, please contact us or download the catalog.

  • others
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Static Electricity Removal Necklace "Guardian Power Neck"

Static Electricity Removal Necklace "Guardian Power Neck"

Static electricity prevention, pollen adhesion prevention, and heat generation effect! This is a static electricity reduction necklace.

The Guardian Power Neck is a necklace made using the acrylic conductive fiber "Corebrid B," developed by Mitsubishi Rayon Co., Ltd., which excels in static electricity removal and photothermal effects. It prevents the unpleasant shocks of static electricity and reduces the adherence of dust and pollen attracted by static electricity. The necklace warms up under light. If it gets dirty, washing it will not change its effectiveness. 【Features】 ○ Prevention of unpleasant shocks from static electricity ○ Reduction of adherence of dust and pollen attracted by static electricity ○ Size: Approximately 72 cm (total length) ○ Material: 50% PP, 50% acrylic For more details, please contact us or download the catalog.

  • Safety and consumables
  • others
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Sensors

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.