Last Updated： Aggregation Period:Jan 28, 2026～Feb 24, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 28, 2026～Feb 24, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 28, 2026～Feb 24, 2026
This ranking is based on the number of page views on our site.
151～180 item / All 2904 items
![[In Development] Directional Wind Speed Sensor](https://image.www.ipros.com/public/product/image/e8f/2000891847/IPROS66619153151138947021.gif?w=280&h=280)
You can detect wind direction and wind speed in combination with the attachment!
The small wind speed sensor under development can achieve directionality by combining attachments. We will design attachments according to the sensor's application and installation conditions and provide suggestions. Please feel free to consult us if you have any requests.
Low mounting height with resin package products! Ideal for LEDs too!
The CRD S series is a resin-sealed SMD package product for surface mounting. It has a lower mounting height than standard packages, allowing for the installation of thin LEDs without obstructing light. Additionally, we have added the "S-223T (22mA)" for high-brightness LEDs. Previously, the series had an upper limit of "S-183T (18mA)," which required the use of multiple components for 20mA high-brightness LEDs. However, with the "S-223T (22mA)," it is now possible to supply a constant current with a single component.
Achieved miniaturization compared to conventional glass-sealed types!
NT thermistors are glass-encapsulated thermistors with high heat resistance and high sensitivity. They offer excellent responsiveness and, due to their stability from automated production, are highly reliable products that can be widely used in various applications.
Maximum thickness of 500 microns! A slim temperature sensor that can be installed in narrow spaces!
"JT Thermistor" is a compact and ultra-thin temperature sensor with a minimum length of 25mm and a maximum thickness of 500μm. It also excels in electrical insulation, making it safe to use in tight spaces or areas where it may come into contact with electrodes.
独自のセンシング技術で熱伝導率計測を実現！
八戸工業高等専門学校および弘前大学と共同で『保護熱源式温度センサ』を開発しました。センサを能動的に機能させることにより熱物性（熱伝導率）の測定が可能になった常識を変える新しいセンサです。 本センサは、SEMITEC独自の温度に俊敏に反応する薄膜サーミスタ（FTシリーズ）を複数個使用した専用デバイスと、独自の制御システムから構成されるセンサです。 ごく微小な温度変化を超高速かつ非常に精密に計測することで実現した被測定物の熱伝導率を計測することが出来ます。 この熱伝導率を計測できる特徴を生かし、皮膚がんなど、患部を切除することなく非侵襲でがんのステージ診断する機器への応用が期待できます。
We provide sensor processing for printers, copiers, and other equipment.
We supply thermistor sensors for OA equipment, including printers, copiers, scanners, projectors, fax machines, routers, and various other custom sensor processing. SEMITEC Corporation handles bulk sensors, thin-film sensors, and infrared sensors, which are widely used in various applications, including home appliances such as air conditioners and refrigerators, OA equipment like printers and copiers, as well as in automobiles and medical devices, with temperature sensors being the primary focus.
SEMITEC's unique thermistor "FT," heat-resistant up to 250℃, with a thickness of 150μm, can be installed in close proximity, maximizing the performance of power semiconductors!
SEMITEC's unique thin thermistor "FT" can be installed near power semiconductor devices due to its high heat resistance. By accurately and rapidly detecting temperature, it maximizes the capabilities of power semiconductors. Furthermore, it supports various mounting methods, making it suitable for power semiconductors and power modules. 【Features】 - High heat resistance: -40℃ to 250℃ ┗ Can be installed near power semiconductor devices - Thin: t=150μm ┗ Space-saving - Supports various connections 1) Wire bonding ┗ Aluminum wire, gold wire 2) Solder 3) Conductive adhesive - Backside metallization compatible ┗ Can be soldered
Easily manage temperature measurement data on your PC! Eliminate the effects of radiation for high-precision temperature measurement.
This system utilizes a "three-ball thermometer" to theoretically measure the effects of radiation from the output values of three thermocouples with different sensor sizes, achieving highly accurate measurements with low power consumption. It does not require forced ventilation or a power supply, making it energy-efficient. Measurements can be taken with a data logger that supports three or more thermocouple inputs. Additionally, the sensor can be compactly folded, making transportation and installation easy. 【Features】 ■ Eliminates the effects of radiation with a three-ball thermometer, enabling accurate temperature measurement ■ Suitable for measuring air temperature in areas exposed to direct sunlight outdoors ■ Does not require forced ventilation or a power supply, making it energy-efficient ■ The sensor can be compactly folded for easy transportation and installation ■ Measurements can be taken with a data logger that supports three or more thermocouple inputs *For more details, please refer to the PDF document or feel free to contact us.
Identifiable 256 code patterns! Complete non-contact type for AGV, 8-bit binary output address sensor SMR-2352.
This is an 8-bit output type address sensor (spot mark reader) that identifies the position of an unmanned transport vehicle. It detects address magnets with arbitrary information (0 to 255) written on them and performs vehicle control (branching, stopping, accelerating, decelerating, etc.) based on the current location information. Since it reads as an absolute value, it is less likely to skip addresses. 【Main Features】 - The address code can identify 256 codes in 8-bit binary. - Adopts a mobile reading method, allowing reading while the unmanned transport vehicle (AGV) is in motion. - Available with N-pole 'SMR-2352H2-N' and S-pole 'SMR-2352H2-S'. - The spot mark reader equipped with reading timing output reads information when positioned directly above the address magnet board while in motion. - The address magnet board can be selected from yellow and green laminates. - Easily used when a large capacity RFID IC chip is not required. - Suitable for environments where barcodes cannot be used due to dust and other influences. *For more details, please contact us.
1-axis type 360° (±180°) tilt angle detector. Linear analog output in the range of ±180°!
This is an inclination angle detector using MEMS. It detects a range of ±180° and outputs an analog signal corresponding to the angle. Additionally, the output zero point value can be set after installation. 【Main Features】 ■ A compact and easy-to-handle inclination (rotation) angle sensor with a range of ±180° ■ Allows for a 0° preset after installation, eliminating the need for troublesome initial value adjustments ■ Protection structure: IP-67 Outputs 4-20 mA or 1-5 V for ±180 degrees.
Non-contact linear displacement sensor that is less affected by vibrations and shock waves. Ideal for position detection of linear devices such as air cylinders!
"MP-620 Series" Linear Displacement Sensor Utilizing multiple uniquely developed detection elements called "saturable coils," it detects the relative position with respect to the detection body (magnet) non-contactly and provides linear output (voltage/current). Since each detection element captures the positional changes of the detection body (magnet), disturbances in output due to vibrations or shocks are almost nonexistent. The sensor part and the detection body are completely separated (8mm ± 2mm), preventing the generation of wear particles due to contact. It is also suitable for absolute position detection of magnets built into oil pneumatic cylinders, etc. (Absolute). Ideal for measuring displacement in robotic arms and similar applications. 【Main Features】 ■ Power supply voltage: DC +24V ■ Output: MP-620 (voltage output 1-5V), MP-621 (current output 4-20mA) ■ Effective length: 100mm to 800mm * Please consult for lengths over 800mm (maximum support up to 1600mm) ■ Repetition accuracy: less than 0.1mm ■ Capable of detecting various magnets compared to our conventional linear displacement sensors * Adjustments may be necessary. ■ Compared to our sleeve sensors, it has very little dead space and is compact. * There is also a compact type MP-4731 with a 15mm stroke.
I will explain the relationship between response frequency and response speed in analog sensors!
What a third installment! In the product catalog of magnetic sensors manufactured by Makome Research Institute, there is an item labeled "Response Frequency (Frequency Characteristics)." There are similar items in the product catalogs for "Linear Displacement Sensors" and "Rotary Angle Detection Sensors," and I believe many people find this unclear. Generally, it would be "response speed for linear displacement" and "response rotation speed for rotary angles," but at Makome Research Institute, the term "frequency" is used. This time, I would like to consider how the frequency, commonly used in the world of electricity, translates to "displacement." *For more details, please download the catalog or feel free to contact us.*
It is a waterproof magnetic sensor (switch). IP67 N pole and S pole individual output.
Since it uses magnetism, it is resistant to dirt and can be used outdoors without any issues. It also supports extension without cable connections. If you wish to use it in completely submerged conditions, please consult us. We will introduce products that are suitable for your environment. (There may be new developments due to custom specifications/IP-68, etc.) If you have any other questions, please feel free to contact us.
![[New Product] CAN Communication Compatible Guidance Sensor for Automated Guided Vehicles (AGV)](https://image.www.ipros.com/public/product/image/597/2000703771/IPROS56569767028388220638.png?w=280&h=280)
New "CAN communication" specifications added to the magnetic guide sensors for Automated Guided Vehicles (AGVs)! Contributes to reduced wiring!
GS-500 Series This is a guide sensor compliant with CAN2.0A (ISO-11898-1). ■ Straight guidance mode output ■ Left-right branching mode output ■ Parallel (15bit) output are continuously output, allowing for the appropriate signals to be captured as needed! Additionally, the detection surface and cable exit direction can now be selected! ▶ Flexible adaptation to compact or low-floor vehicle designs is expected. The blue anodized case is fully metal (IP67 structure) and has a robust construction. A standard digital-analog output type is also available. If you have a course equipped with our sensors, it can be used as is. *For more details, please refer to the PDF materials or feel free to contact us.
![[Case Study] Troubles Caused by Chocolate Stops on the Line](https://image.www.ipros.com/public/product/image/2f3/2000717110/IPROS98872546452368806353.png?w=280&h=280)
Frequent "choco stops" during line operation! Introducing the implementation of positioning sensors and showcasing examples of improvements!
At one point on the production line, frequent troubles (chocolate stops) were occurring, and during these troubles, the line could not be stopped, causing work from the previous process to enter the trouble area and become defective. We wanted to introduce AB control, so we summarized the current issues: "Troubles are not detected, and work is being fed in," "It is unsafe because work continues to flow in even while workers are performing recovery operations," and "The working environment is poor, and the photoelectric sensor is not detecting." These three points were identified as the causes. Therefore, we installed the positioning sensor "PS-4482" from Makome Research Institute on the line conveyor and the magnetic body "MG-102A" on the work pallet. As a result of the improvements, we achieved a work loss amount of 0 yen and realized a cost reduction of 26,568,000 yen per year. *For more details, please refer to the PDF document or feel free to contact us.
![[Case Study] Full Inspection of Steel Balls through Mass Production](https://image.www.ipros.com/public/product/image/cc3/2000717128/IPROS72362463818769609990.png?w=280&h=280)
We are manufacturing iron balls, but magnetization of the iron balls has occurred! Here is a case study of installing guide sensors on the line conveyor!
We manufacture about 40,000 iron balls with a diameter of 10φ every day, and among them, defective products (magnetized iron balls) are mixed in. Currently, only random sampling inspections are conducted, which allows defective products to escape. There was a request for "monitoring of magnetized iron balls on the automated line" and "to maintain a detection distance of 30mm between the detection object and the sensor due to the line structure." We installed the guide sensor "GS-116" manufactured by Makome Research Institute on the line conveyor, enabling the detection and expulsion of the magnetic field of the iron balls (though this depends on the strength of the magnetic field). As a result of our improvements, we achieved a loss amount of zero for full inspections during the occurrence of defective products. *For more details, please refer to the PDF document or feel free to contact us.
We are receiving positive feedback. The long-awaited current output type of the MP-620 will be added to the lineup. Since it is non-contact, there is no generation of debris due to friction.
"MP-621" Linear Displacement Sensor (Current Output Type) Using a uniquely developed technology with a saturable coil, it detects the position of a magnet linearly and non-contact. The sensor part and the detection magnet can be placed 8mm apart without contact. It is also suitable for detecting the absolute position of magnets built into hydraulic cylinders, air cylinders, etc. *Adjustments may be necessary when detecting existing magnets. Ideal for measuring displacement in robotic arms and other applications. Linear Potentiometer (Potentiometer) [Main Features] ■ Power supply voltage DC +24V (output 4-20mA) ■ Capable of detecting various magnets compared to conventional linear displacement sensors ■ Much smaller dead space and more compact compared to our sleeve sensors Please consult us regarding dimensions, detection range, distance, etc.! *For more details, please contact us.
Non-contact linear measurement over a range of 15mm. Absolute output voltage 1-5V. Also suitable for fine adjustment of positioning.
15mm stroke, non-contact detection from a position 8mm away Not affected by non-magnetic obstacles Achieves waterproof and dustproof performance with protection rating "IP67" Compact and small size design, offering high flexibility during installation and mounting Used magnets: MG-620, MG-620-1 (shape can be modified upon special request) There is also the MP-620 series with an effective length of 100mm or more. Linear potentiometer (potentiometer) Displacement measurement and measurement
Optimal for liquid level management.
**ZKT Series** ZKT-D-OL (for oil / for drums) ZKT-D-W (for water / for drums) ZKT-P-OL (for oil / for drums) ZKT-P-W (for water / for drums) **Advantages** ● Liquid level detection in just 1 second ● The contact pipe section is made of stainless steel, making it durable ● Lightweight and easy to carry **Liquid Level Gauge Series** E-C (for oil) **Advantages** ● Lightweight and affordable ● Enables liquid management inside drums ● No electricity or batteries required ● Usable liquids include kerosene, light oil, oil, and water *Solvents and chemicals are not allowed*
Unlike body surface temperature, it is possible to observe physical condition without being affected by the environment! Measurement similar to that of an ingestible sensor can be achieved without insertion or ingestion into the body!
The "CBT Sensor" is a measurement unit for measuring internal deep body temperature. It can precisely measure internal deep body temperature using a thin, highly sensitive heat flux sensor combined with an algorithm. This allows for easier and deeper analysis of physical condition. Unlike surface temperature, it enables observation of physical condition without being affected by the environment, and it allows for measurements similar to ingestible sensors without the need for insertion or ingestion. 【Features】 ■ Not affected by environmental conditions ■ No need for insertion or ingestion ■ Capable of measurements similar to ingestible sensors, etc. *For more details, please download the PDF or contact us.
For temperature monitoring of transformers, reliable temperature monitoring is possible without being affected by noise from EMI/RFI or high voltage environments.
OSENSA's fiber optic temperature sensor for transformers enables real-time temperature monitoring of transformers without being affected by noise in environments with EMI/RFI or high voltage. The basic configuration of this product consists of a temperature sensor probe, transmitter, and software. The PRB-230 probe is designed for temperature measurement in oil-filled transformers and accommodates immersion and removal processes for various types of transformer oil. The transmitter is available in a type that can connect multiple probes with a single unit, allowing for simultaneous measurement of temperatures at multiple points.
A compact digital nano spectrometer that covers a wide range from UV to near-infrared (340 to 1010 nm).
It is an ultra-compact spectral sensor based on innovative digital nano-convergence technology. ■ Capable of spectral measurement across a wide wavelength range of ultraviolet, visible, and near-infrared. (N1: 600–1,000 nm / V1: 390–760 nm / W1: 340–1,010 nm) ■ Ultra-compact size The spectral sensor module is only 6mm x 6mm x 5.3mm in size. ■ Mass production is possible Due to its excellent mass production capability and ultra-compact size, it is suitable for integration into devices and applications in the mass market that require large-scale production, such as mobile/wearable devices and IoT.
Reliable temperature monitoring is possible without being affected by noise from EMI/RFI or high voltage environments.
The OSENSA fiber optic temperature sensor is a product suitable for temperature measurement in power applications, capable of reliable temperature monitoring without being affected by electromagnetic interference or noise. The basic configuration of this product consists of a temperature sensor probe, a transmitter, and software. The probe is protected by a highly insulating material for installation against the windings of motors and generators, allowing use in environments up to 38kV (three-phase). Additionally, options for the probe's tip are available for easy installation. The transmitter designed for motors and generators (medium voltage) can connect three or six fiber optic temperature sensors with a single transmitter, making it convenient for three-phase monitoring of various equipment.
High-precision and highly reliable temperature measurement is possible in MRI and RF environments.
OSENSA's optical fiber temperature sensor enables reliable temperature monitoring unaffected by electromagnetic interference or noise. This product is specifically designed for use in MRI and RF environments, achieving accurate and reliable temperature sensing in life sciences, research, and industrial applications where resistance to high-intensity electromagnetic fields and microwaves is required. The basic configuration of the product consists of a temperature sensor probe, a transmitter, and software.
High-precision, high-resolution line sensor that withstands harsh environments! Line resolver.
● High-precision, high-resolution line sensor that withstands harsh environments ● Measurement range accommodates both short strokes and long strokes
Achieves high reproducibility and durability (passing a durability test of 10 million cycles) by incorporating a 20mm long stroke and linear bearings.
−
Industry's first mini size!
It is a pen-shaped micro spring displacement sensor that allows for easy operation.
High-precision, high-resolution linear sensor that withstands harsh environments - Inner Resolver
High-precision, high-resolution linear sensor that withstands harsh environments.
Wireless sensor system using 920MHz specific low power radio.
Each sensor node (child device) measures temperature and humidity at regular intervals and transmits the measurement data to the parent device via a specific low-power wireless frequency of 920MHz. The parent device aggregates the latest data from the child devices and responds to inquiries from the integrated monitoring device with temperature information and more. The integrated monitoring device can obtain temperature and humidity information by communicating with the parent device in accordance with SNMP or UDP communication protocols. *For more details, please refer to the PDF document or feel free to contact us.*
Prevention of contact with high-voltage lines and heavy machinery! Detects objects intruding into the barrier! Measurement can be done through glass.
The LMS511 is a high-precision laser barrier system that enables measurement through dust and glass using multi-echo technology. It detects intrusions by high-voltage lines and heavy machinery into the barrier and issues alarms accordingly. It can cover an angle of 190 degrees and can detect black matte objects at a distance of up to 40 meters. Additionally, it has an IP67 waterproof rating, making it suitable for outdoor environments without any issues. Currently, we are offering a catalog with usage examples! 【Features】 - Low false alarm rate in dusty environments and through glass - Real-time data output available through various interfaces - Simultaneous monitoring of any range up to 10 fields - Robust aluminum die-cast housing *We are currently offering free rental of demo units. Please contact us for more details. Additionally, we are giving away card-type USB memory sticks to five lucky winners in a lottery!
