★☆★☆【MiniLab-026/090】Glove Box Thin Film Experiment Device★☆★☆

High-performance multi-sputtering device 6-element multi-sputter (for Φ4 inch) 4-element multi-sputter (for Φ6, 8 inch)

Continuous multilayer film, simultaneous film formation (2-6 elements simultaneous film formation: RF, DC can be freely switched from HMI) High-power RF, DC power supplies, and pulse DC power supplies can be flexibly configured for multi-cathode using our unique 'Plasma Switching Relay' module, allowing for versatile applications. High-temperature substrate heating stage (double jacket water-cooled) options: -1) Max 600℃ (lamp heating) -2) Max 1000℃ (C/C composite) -3) Max 1000℃ (SiC coating) Reverse sputtering stage inside the load lock: -1) 300W, or -2) Soft-Etching (<30W) System main control: 'IntelliDep' control system Windows PC (or TP HMI) interface All operations are centrally managed from a single HMI screen.

• Air conditioning equipment
• Duct related equipment

Compact measurement, robust body, high precision ±1%, 240msec high response. It can be applied for various purposes such as industrial machine control and temperature monitoring in production sites.

**Overview** The "PyroCouple" from UK-based Calex Electronics is a compact, lightweight, low-cost, and high-performance infrared temperature sensor unlike any other. It can non-contact measure the surface of objects that are "moving," "rotating," or "cannot be touched," allowing for fast and highly reproducible temperature control. **Features** ◎ Integrated amplifier and sensor ◎ 4-20mA output (standard), 0-50mV, thermocouple K, J, T output (optional) ◎ Accuracy: ±1% or ±1℃ (whichever is larger) ◎ Reproducibility: ±0.5% or ±0.5℃ (whichever is larger) ◎ Response time: 240msec ◎ Protection rating: IP65

• Other security systems

TIIS (Technical Institution of Industrial Safety) certification obtained for intrinsically safe explosion-proof radiation temperature sensor, suitable for use in hazardous locations (Zone 0, 1, & 2).

ExTemp is an intrinsically safe explosion-proof radiation temperature sensor that can be used in hazardous material handling equipment and factories such as petrochemical plants, pharmaceutical factories, and chemical plants. (TIIS Type Certification Number: 21097)

• Other measuring instruments

USB-connected compact infrared temperature sensor, no power supply needed, powered by USB bus power from a PC, parameter settings and data management with the included dedicated software.

【Overview】 Install the standard accessory "Calexsoft," and then simply connect it to a Windows PC via a USB cable. You can easily set measurement parameters, conduct measurements, and analyze/export results in CSV format on your PC with a plug-and-play feel. USB output operates solely on USB bus power when connected to a PC, requiring no additional power supply. This expands its application range in various industrial fields and research laboratory experiments. 【Features】 ◎ USB data logging ◎ Wide range: -20°C to +1000°C ◎ Excellent basic performance: accuracy ±1%, reproducibility ±0.5%, 125 msec fast response ◎ Emissivity adjustment range: 0.2 to 1.0 ◎ Measurement wavelength range: 8 to 14 μm ◎ Compact size Φ18mm x 45mm

• Facility Management System

Easy setup with a high-performance touch panel converter, data logging, and data storage on a microSD card. PM2.2 measurements can also be taken on glossy metal surfaces.

**Overview** With a highly visible high-brightness touch panel display, parameters such as temperature range, emissivity, and sampling rate can be intuitively operated and set. Long-term data storage and management are possible with a microSD card. (*There is also an option for a converter without a display.) The compact sensor head measures φ18mm x 45mm, allowing for temperature measurements in tight spaces. It employs sensors and cables with excellent noise resistance, making it suitable for integration into moving devices such as robotic arms. The PM2.2 model uses a short wavelength of 2.2um, capable of measuring high temperatures (Max 2000℃) and glossy metallic surfaces. **Features** ◎ Wide range: -20 to 1000℃ (PM), 100 to 2000℃ (PM2.2) ◎ Excellent basic performance: Accuracy ±1%, Repeatability ±0.5%, 240msec fast response ◎ Measurement wavelength range: 8 to 14μm (PM), 2.0 to 2.2μm (PM2.2) ◎ Compact Φ18mm x 45mm

• Facility Management System

Parameters such as temperature range, emissivity, and alarms can be set using a smartphone or tablet, allowing for easy configuration without the need for a display instrument or power supply for the instrument.

● You can use a smartphone or tablet to perform the settings. ● Download the dedicated app for free from Google Play (Android 4.1 to 5.1). ● Using Android's NFC communication, simply touch the sensor part to read and write data. ● Ultra-compact sensor (Φ31mm x t29mm) allows temperature measurement in narrow spaces. ● Fast response time of 125 msec, high accuracy of ±1.5%. ● Voltage output (0-5V or 0-10V), or K thermocouple output.

• Other measuring instruments

USB connection type, parameter setting and data management with the included dedicated software. A wide range of wavelength options is available. Three models can be selected based on your purpose.

【Overview】 Connect to a Windows PC using the standard accessory "CalexConfig" and the included USB cable (1.8m), allowing for the configuration of sensor measurement parameters, analysis of measurement results, and CSV output on the PC. 1) 4-20mA output 2) USB output (operates on USB bus power) 3) Simultaneous use of 4-20mA/USB output These three usage methods are available. 【Features】 ◎ Simultaneous use of USB data logging and 4-20mA analog output ◎ Excellent basic performance: accuracy ±1%, reproducibility ±0.5%, 200msec fast response ◉ PUA2: Covers short wavelengths from 2.0 to 2.4μm, capable of measuring metal surfaces ◉ PUA5: Suitable for measuring glass surfaces at a wavelength of 5μm ◉ PUA8: General-purpose, applicable to a wide range of materials such as paper, wood, plastic, and textiles at a wavelength of 8-14μm

• Other security systems

The "Hotron Non-Contact Switch" allows you to open and close doors without directly touching door knobs or switches, making it hygienic! You can choose from two types: the "Hand Wave Sensor," which only requires you to wave your hand, and the "Foot Switch," which only requires you to place your foot at the entrance. It reduces the risk of virus and bacterial infections in places where hygiene is a concern, such as food factories, restaurants, hospitals, and nursing facilities. 【Features】 ○ Reduces the risk of virus infection by allowing door operation without contact ○ A wide variety of options to choose from based on application and location ○ Ideal for places where hygiene is a priority, such as food factories and medical facilities ○ Prevents unnecessary detection due to the switch mechanism 【Product Lineup】 ■ Hand Wave Sensor Series ○ Exposed waterproof type, front, down, and side-facing types "PF-R5" ○ Exposed type, front-facing type "PF-R1" ○ Embedded type, front-facing type "PF-U2" ○ Exposed type, downward wide type "PF-R4" ■ Foot Switch Series ○ Slim type with wide opening, vertical beam type "PF-01S" ○ Slim type with wide opening, horizontal beam type "PF-03S" ○ Standard type, horizontal beam type "PF-05" ◎ For more details, please download the catalog or contact us.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

Hotron's vehicle detection sensors allow you to search for products that meet your needs from three categories: "Purpose of Use," "Location of Use," and "Product List." The sensors detect the passage of vehicles and notify you with a rotating light, or switch the display of parking availability. They manage vehicle presence, full parking, and exit warnings in parking lots, contributing to safe driving and smooth operational management within the parking area. They are used in various settings, from coin-operated parking to large-scale parking lots.

Management College Co., Ltd. will be exhibiting at the "24th [Tokyo] General Affairs, Human Resources, and Accounting Week [Autumn]" held at Makuhari Messe from September 10 (Wednesday) to 12 (Friday) within the "HR EXPO." This time, we will introduce the newly released "Quick Learning Program" from last October at our booth. This is a new training program aimed at new employees from Generation Z, designed to efficiently develop the six essential skills required for business professionals, allowing participants to engage in training actively and enjoyably. We will also present our popular "Management Game MG Training Series," and we sincerely look forward to your visit. [Free Seminar Announcement] Theme: Case Studies of Management Simulation Training in Listed Companies Our Takada will introduce trends in experiential learning and corporate case studies. There will also be special benefits for seminar participants (such as information on special free trial seminars), so we hope you will register for this as well. *The seminar will be held on September 10 (Wednesday) at 15:30 in Seminar Room G within the venue.

Developed for the purpose of improving the safety of sales areas, the SP Bracket-specific anti-fall part (NX-BSP). Simply inserting the bracket activates the internal spring, securing it firmly. It prevents unexpected dislodging, thereby averting product drops and accidents. Moreover, the release is easy and does not compromise workability, making it efficient for layout changes and sales area construction. It achieves a balance between "safety measures" and "work efficiency." An essential part for enhancing the safety of sales areas. Please make use of it for risk management at construction sites.