[Free Materials Available] Introducing Useful Information on Vehicle Detection Sensors!

Contributing to smooth and efficient parking management, from coin parking to large-scale parking lots.

To guide customers to parking spaces without stress. Hotron's "Vehicle Detection Sensor" adapts to on-site needs, including occupancy management in parking lots, detection of trucks at loading docks, merging alerts, exit warnings, and drive-thru applications, allowing for the construction of various systems according to scale. ■ Hotron's Vehicle Detection Sensor introduction video https://youtu.be/wij31XlZz00?si=RhhhLeBNYrJPonBD ◎ For more detailed information or inquiries about our products, please feel free to download the catalog or contact us.

• Accessories around the opening
• Other measuring instruments

Achieving cost reduction through occupancy management of parking lots tailored to specific scenarios such as floor management, block management, and space management.

Parking space management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spots, enabling efficient parking lot operations. In large parking lots, there are two main management methods: the "floor management method/block management method," which emphasizes cost reduction, and the "parking space management method," which prioritizes high accuracy. The floor management method/block management method involves installing sensors at specific points to count and manage the number of vehicles passing through. This method is easy to install and cost-effective. The parking space management method involves installing sensors in every parking space, allowing for individual management of each vehicle, thus achieving highly accurate parking management. ■ Target Products - Vehicle Count Sensor CCS2 (Ceiling-mounted, Infrared type) - Occupancy Detection Sensor HM-UX2/UW2 (Ceiling-mounted, Ultrasonic type) ■ Introduction video for the Occupancy Detection Sensor HM-UX2 https://youtu.be/5tzrBAykAqU?si=EwSLqE9WYoolaNCy

• Accessories around the opening
• Other measuring instruments

In a narrow parking lot, the occupancy status of each parking space is detected to prevent unnecessary entry of new vehicles and ensure safe parking lot operations.

For managing occupancy in small parking lots, the "space management system," which installs sensors in each parking space to display availability with higher accuracy, is recommended. In small parking lots, maneuvering vehicles can be difficult, and if a driver mistakenly enters, they may have to back out, leading to customer stress and potential accidents. Therefore, by installing sensors in each parking space to ensure accurate occupancy displays, we can reduce unnecessary entries of new vehicles and achieve safe parking lot operations. ■ Target Products - Vehicle Detection Sensor HM-UX2/UW2 (Ceiling-mounted, Ultrasonic type) - Vehicle/Pass Detection Sensor HM-LC6 (Relay type, Loop coil type) - Vehicle Detection Sensor HM-LC7/LC7-FLS (Communication type, Loop coil type) - Vehicle/Pass Detection Sensor HM-S6 (Buried type, Magnetic type) - Vehicle Detection Sensor HM-S8 (Exposed type, Magnetic type) ■ Introduction video for Vehicle Detection Sensor HM-UX2 https://youtu.be/5tzrBAykAqU?si=EwSLqE9WYoolaNCy

• Accessories around the opening
• Other measuring instruments

Install vehicle detection sensors suitable for the scale and method of coin parking, providing real-time occupancy information.

We install vehicle detection sensors suitable for the scale and method of coin parking, such as gate type, flap type (lock type), gate-less, and flap-less (lock-less), providing real-time occupancy information. This ensures accurate occupancy displays for safe coin parking operations.

• Accessories around the opening
• Other measuring instruments

Accurately detects traffic jams and oncoming vehicles! A vehicle count sensor that can be used for managing occupancy as well as for exit warnings.

The "CCS2" is a ceiling-mounted vehicle counting sensor that employs an infrared reflection method. It can be installed at fixed locations such as entrances and ramps, and it detects vehicles in both directions with a single unit. It can accurately detect and count vehicles even during traffic jams or when vehicles are passing each other. It contributes to cost reduction in managing occupancy in large parking lots. It can also be used as a sensor for exit warnings, not just for vehicle counting. 【Features】 ■ Can be installed in high ceiling locations with a mounting height of 4m ■ Detection area covers 40 spots, allowing for wide-range detection ■ Angle adjustment is possible up to ±5° ■ The display LEDs are color-coded by direction, making operation confirmation easy ■ Easy installation; simply set the mounting height and surface type for straightforward use *For more details, please download the catalog or contact us.

• Security guards and entrance/exit management
• Other security systems
• Secondary paving products

SSR-3 is ideal for sites where there is a risk of contact with pedestrians! A vehicle detection sensor that ensures safety at the exits of parking lots in apartments and office buildings.

This is a suitable passing detection sensor for locations where there is a risk of pedestrian contact, such as parking lot exits of condominiums and office buildings. The "SSR-3" is a radar-reflection combination sensor that can determine direction with a single unit. It is also compatible with ceiling mounting. Additionally, it can warn of vehicles exiting the parking space when used in conjunction with our rotating light controller. For more details, please contact us or download the catalog.

• Safety Supplies
• Other measuring instruments

Industrial sensor for installation at heights from 3.5m to 6.5m. IP65.

"KABUTO" is an industrial sensor designed for installation at heights ranging from 3.5m to 6.5m. It features a long-range radar and a wide infrared area as a combination sensor. It detects only the desired direction through its directional detection function. 【Features】 ■ IP65 industrial sensor ■ Detects the entry and presence of packer trucks at waste disposal sites ■ Monitors trouble spots at merging locations from a high vantage point ■ Alerts to potential contact accidents involving forklifts within factories ■ Capable of monitoring from a height of 6.5m, with settings adjustable via remote control ■ Ensures stationary detection in a wide infrared area; directional management is possible when used across the entire area ■ Manages lateral directionality with cross-traffic functionality ■ Simple installation and initial setup ◎ For more details, please contact us or download the catalog.

• Safety Supplies
• Other measuring instruments

Ceiling-mounted ultrasonic sensor for vehicle detection to reliably detect the entry and exit of each parking space.

The "HM-UX2-HM-UW2" is a vehicle detection sensor for parking systems that utilizes ultrasonic technology. It offers excellent cost performance for large-scale parking management. Since it can be set up directly on the sensor itself, a controller is not necessary. Together with our rotating light controller, it can provide warnings for vehicles exiting parking spaces. ★ Introduction video for HM-UX2 can be found here: https://youtu.be/5tzrBAykAqU 【Features】 ● Ceiling-mounted sensor that detects vehicles in each parking space Detection distance can be adjusted according to the ceiling height of the parking lot. ● Detection possible without being affected by the floor surface! By changing the detection distance as needed, it is unaffected by the floor surface. ● Simple installation with reduced wiring No synchronization lines are needed when installing sensors in each parking space, resulting in less construction effort. ● Option to choose between vehicle detection and passage detection types With dip switch settings, it can be used as either a vehicle detection type or a passage detection type. ● Choose between relay type (UX2) and communication type (UW2) The relay type is recommended for small parking lots, while the communication type with reduced wiring is ideal for larger parking facilities. ● Convenient for truck loading bays and drive-thrus.

• Other measuring instruments

Less affected by the natural environment! A circular-shaped vehicle detection sensor evolved with a load capacity 10 times greater (compared to our company).

The "HM-S6" is an embedded park sensor that detects vehicles through changes in magnetic flux, accommodating various situations from passage to occupancy. It is recommended for use at the opening and closing of waste treatment facility doors, as well as for gates and outdoor parking applications where vehicles pass through. It can also be installed on rebar or steel plates. 【Features】 ■ Less susceptible to the effects of natural environments such as rain, snow, temperature changes, and geomagnetism ■ Protection rating IP68 to reduce water ingress ■ Ten times the load capacity compared to conventional embedded park sensors (based on our comparison) ■ Can distinguish between vehicles even when they pass continuously, one by one ■ Can be installed on rebar or steel plates *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables
• Safety Supplies
• Parking lot facility construction

Communication-type loop coil vehicle detection sensor capable of setting up to 100 vehicle spaces.

The "HM-LC7/LC7-FLS" is a vehicle detection sensor using a communication-type loop coil system. The loop coil sensor is a simple vehicle detection system formed by a coil and a controller. It detects general vehicles in parking lots and traffic management systems. Since each detector is connected via communication lines, it places less burden on installation compared to relay types. It can be configured for up to 100 parking spaces. 【Features】 ■ Loop coil type detector aimed at general vehicles ■ Vehicle detection results are reported to the payment machine via communication (RS-485) ■ Configurable for up to 100 parking spaces ■ Less installation burden compared to relay types due to communication line connections ■ Flap plate can be raised or lowered based on communication instructions from the payment machine (only for HM-LC7) ■ HM-LC7-FLS is designed for flapless (no locking plate) use ◎ For more details, please contact us or download the catalog.

• Other measuring instruments

Compact-sized loop coil vehicle detection sensor

The "HM-LC6" is a relay-type loop coil vehicle presence and passage detection sensor. The loop coil sensor is a simple vehicle detection system formed by a coil and a controller. It detects general vehicles in parking lots and traffic management systems. Additionally, it can warn when a vehicle exits the parking space when used in conjunction with our rotating light controller. 【Features】 ■ Loop coil type detector aimed at general vehicles ■ Achieves high accuracy in full/empty management in small parking lots ■ Recommended for the opening and closing of input doors at waste disposal sites and outdoor parking lots ■ Adopts an automatic tuning method. Just powering it on adjusts the device to its optimal operating point ■ Can be used as a sensor for exit warning when combined with an exit warning light For more details on the exit warning system, click here: http://www.hotron.co.jp/recommend/car_alert.html ◎ For more information, please contact us or download the catalog.

• Other measuring instruments

Vehicle detection sensor that does not detect people or animals, unaffected by natural environments such as rain or snow and geomagnetic influences.

The "HM-S8" is an exposed type park sensor that does not require installation and is less affected by natural environments such as rain and snow, as well as geomagnetic influences. It is installed next to the flap plate, so no installation is required during construction. The vehicle detection results are reported to the payment machine via communication (RS-485). 【Features】 ■ Less affected by natural environments such as rain, snow, temperature changes, and geomagnetism ■ Protection rating IPX7 ■ Does not detect humans or animals ■ Installed next to the flap plate (no installation required) ■ Usable without a flap (passage is not allowed) ■ Cables available in 1.5M and 2M ■ Achieves high-accuracy occupancy management in small parking lots *For more details, please refer to the PDF materials or feel free to contact us.

• Safety and consumables
• Safety Supplies
• Parking lot facility construction

From June 2025, measures against heat stroke in the workplace have become mandatory. Additionally, in December 2026, a "Support Package for Heat Wave Measures in Construction Work" was formulated, making heat stroke prevention during the summer a pressing issue, especially for those engaged in the construction industry. This time, we provide a collection of heat stroke prevention materials that can be utilized through Sysmet Co., Ltd.'s comprehensive weather platform, ZEROSAI X-AI. Examples of heat stroke prevention measures possible with ZEROSAI X-AI: - Cloud management of heat stroke information - Forecasting of the heat index (WBGT) tailored to the site with a mesh of 500m for up to 17 days ahead - Observation of the heat index (WBGT) in compliance with JIS standards using a black globe thermometer - Alerts for exceeding work standard values for the heat index (WBGT) via electronic bulletin boards, emails, and business chat tools like direct LINE WORKS We hope this will be useful at your sites as well.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who want to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. Depending on the application and installation location, you can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520." 【Recommended for such places!】 ☑ Entrance facing a busy passageway ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passageways ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing to minimize power consumption, contributing to energy-saving effects ● Equipped with a light touch function, allowing the door to open and close simply by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

In facilities operating nurse call systems, we have made bed exit sensors wireless, allowing them to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. This helps prevent accidents caused by falls, slips, or wandering, contributing to the efficiency of medical operations. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ Bed exit sensors notify wirelessly in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

We have introduced Majesta Fragrance at a cabaret club located in Shizuoka Prefecture. We have selected scents tailored to each space, including the floor, VIP rooms, and restrooms, to provide a total fragrance experience within the establishment. 【Key Points of Introduction】 - Space-specific presentation: By changing the scent for each area, we create a luxurious atmosphere that remains fresh and engaging. - Branding that resonates with the five senses: We support the creation of a venue that is chosen not only for its visual appeal but also for its fragrance. - Offering an extraordinary experience: The moment customers open the door, they are invited into a special time. Majesta Fragrance is also available for free trial installation. If your company or establishment is interested in scent presentation, please feel free to contact us.

A popular garage with power supply, "EV Garage," will open in Tachikawa City. It can be conveniently used with interior lighting and power supply. The full-opening shutter and some models come with shelves for added convenience. Security is also fully equipped, allowing you to use your valuable vehicles, such as motorcycles and cars, with peace of mind. 【Notes on the Premium Type with Power Supply】 - If the electricity usage exceeds 50 kWh/month, an additional charge will be applied. - The maximum output is 20A. Restoration after a breaker trip will be handled at a later date.