Solve your problems with wired bed exit sensors by connecting a wireless set linked to the nurse call system!

This is a comprehensive catalog of products for preventing falls and slips in nursing and caregiving settings. We will introduce Hotron's bed-exit sensors and how to use them.

【STOP! Falls and Slips】 In our comprehensive catalog of fall and slip prevention products, we introduce various bed exit sensor products developed to pursue safety in nursing and caregiving environments and to become a reliable partner for nursing and caregiving staff. With the aging population, incidents of "near misses" in nursing and caregiving settings are increasing. Hotron's nursing and caregiving sensors help prevent accidents caused by frequent falls, slips, and wandering. These products are designed to detect wandering patients as early as possible and prevent it. For more details, please contact us or download the catalog.

• Safety and consumables
• others

This is a simple nurse call system that notifies when a patient gets out of bed, linked to the nurse call system.

The "Nurse Call Linked Wireless Set" for the Hotron Bed Exit Sensor is a simple and convenient notification system that can be linked to a nurse call. - By simply connecting existing products such as "Just Place It Pole-kun," "Foldable Slim Matt-kun," "Ugo-kun," and "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless and detect exits in conjunction with the nurse call. - Being wireless prevents tripping and disconnection caused by cords! *This product is a "low-power radio station" recognized by the Radio Law, operating in the 315MHz band. ◎ For more details, please contact us or download the catalog.

• Safety and consumables
• others

When the plate is removed, we will notify you with a nurse call. By combining the transmitter and receiver, we have made it possible to be wireless!

Bed Exit Sensor / Body Movement Call "Ugo-kun" notifies the nurse when the patient's upper body rises from the bed, causing the plate to detach from the main unit. It is a cost-effective body movement call product that does not trigger a call when the switch is turned OFF, even if the plate is removed. It is compact and easy to install. For more details, please contact us or download the catalog.

• Safety and consumables
• others

Easy to store by folding it in half! Lay it next to the bed and notify with the nurse call when getting out of bed!

The "Foldable Thin Matt-kun" is a wireless mat sensor that notifies via nurse call or similar systems when weight (body weight) is applied to the mat sensor. It can also be used with a wired connection. It is placed beside the bed to detect when a person gets out of bed. Thanks to the wireless design, the cable is shorter, preventing tripping hazards. It can be folded in half, making it easy to store. 【Features】 ■ The fold is flat and not noticeable when stepped on ■ Wireless design reduces the cable length from 1m to 10cm ■ Can be temporarily paused with a switch when not in use, so stepping on it does not trigger a call ■ Logo included for easy identification of the front and back ■ The surface is made of slip-resistant vinyl material, making it easy to wipe clean *For more details, please download the catalog or contact us.

• others

Even without a nurse call, it notifies you with a melody! A bed exit sensor capable of detecting standing up from a wheelchair.

The bed exit sensor for wheelchairs, "Ayumi-chan," notifies when someone stands up from the wheelchair by detaching a plate from the main unit and playing a melody. The main unit has a cute design in an egg shape and pastel pink color. The clothing attachment strap is the same "HB-TH3" used with "Ugo-kun." It can be connected to a nurse call system using a separate cable. The power source consists of four AA alkaline batteries. This item is suitable as a simple nurse call system for rooms without a nurse call, as well as for preventing "surprise" situations for patients waiting for examinations and for detecting movements in the restroom. For more details, please contact us or download the catalog.

• Safety and consumables
• others

The "HM-S6" is an embedded park sensor that detects vehicles through changes in magnetic flux and responds to various situations from passing to stationary vehicles. It can be used for the opening and closing of input doors at waste treatment plants, as well as for gates that vehicles pass through and outdoor parking applications. It can also be installed on rebar and steel plates. 【Features】 ■ Resistant to the effects of natural environments such as rain, snow, temperature changes, and geomagnetism ■ Protection rating IP68 reduces the risk of water ingress ■ Ten times the load capacity compared to conventional embedded park sensors (based on our comparison) ■ Can distinguish between vehicles even when they pass continuously ■ Can be installed on rebar and steel plates *For more details, please refer to the PDF document or feel free to contact us.

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, or management: Are you facing any challenges with current issues or selecting the right sensors for parking management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Vehicle Detection Sensor Basic Guide This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document presents the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

SBS Marketing Co., Ltd., which provides consulting services related to marketing, sales promotion, and customer acquisition primarily in the BtoB (business-to-business) sector based on practical experience in support companies and business companies, has published a page titled "Project Budget Overruns, Delays, and Increased Resource Burden!? 'Scope Creep'" on November 11, 2025 (Tuesday). 'Scope creep' refers to the gradual expansion of a project's initial scope without following formal processes, leading to delays, budget overruns, and increased resource burdens. The page explains examples of occurrence, the negative impacts that can arise, as well as the causes and countermeasures. (Page Overview: Excerpts) ■ What is 'Scope Creep'? ■ Examples of 'Scope Creep' occurrence ■ Negative impacts caused by 'Scope Creep' ■ Causes of 'Scope Creep' ■ Countermeasures to prevent 'Scope Creep' (DL content only) ▼ For more details, please visit this page. https://sbsmarketing.co.jp/blog/scope-creep-2025-11/

Starting from October 2025, Panasonic's indoor units for office and store air conditioners will be renewed! In this renewal, all models will come standard with "100 times nanoe X." This not only enhances comfort with commercial air conditioning but also contributes to improving air quality. Additionally, improvements in installation efficiency to enhance on-site work productivity and a strengthened lineup to accommodate diverse spaces have been implemented. The new indoor units are equipped with high concentrations of nanoe X as standard! They demonstrate a high effectiveness in purifying indoor air during air conditioner operation, providing a safer and more comfortable environment for office and store users and employees. Furthermore, the center of the suction inlet and the center of the hanging bolt have been unified. This allows for the combined use of canvas ducts and panels, improving installation efficiency. If you have any questions or would like a quote, please feel free to contact us. We will fully support you in replacing your commercial air conditioning!

We will be exhibiting at the "Advanced Construction, Disaster Prevention, and Mitigation Technology Fair in Kumamoto 2025," which will be held for two days starting from November 19 at Gran Messe Kumamoto (Masaki Town, Kamimashiki District, Kumamoto Prefecture). This exhibition is organized by the organizing committee of the Advanced Construction, Disaster Prevention, and Mitigation Technology Fair in Kumamoto 2025, aiming to enhance disaster prevention awareness through the introduction of advanced technologies and products related to disaster prevention, as well as to promote economic and technological exchanges. On the day of the event, we will showcase our "High Water Content Soil Improvement Agent MT Series" and "Soil Recycling Technology Bontelan Method," and we will introduce our technologies through practical demonstrations using actual soil. We invite those nearby to stop by our booth. Venue: Gran Messe Kumamoto (1010 Fukutomi, Masaki Town, Kamimashiki District, Kumamoto Prefecture, 861-2235) Date and Time: November 19 (Wednesday) 10:00 AM - 5:00 PM November 20 (Thursday) 9:30 AM - 3:30 PM Our Booth Location: B10 Presentation: November 20 (Thursday) 10:45 AM - 11:15 AM, Seminar Room 4 Advanced Construction, Disaster Prevention, and Mitigation Technology Fair in Kumamoto 2025 HP https://www.s-kumamoto.jp/