Developed an ultrasonic probe using components with iron plating on polyimide film (Nihon Barrel Industry Co., Ltd.).

Relaxation and homogenization treatment of surface residual stress using ultrasound and microbubbles!!

The Ultrasonic System Research Institute has developed (and published) a method to adapt technology for relaxing residual stress near surfaces using ultrasound and microbubbles to ultrasonic transducers. The technology for relaxing residual stress through ultrasound and microbubbles has led to improvements in fatigue strength against metal fatigue, which in turn contributes to the uniformity of the surface of ultrasonic transducers and the efficiency of ultrasonic oscillation, significantly changing the usage of ultrasound. In particular, in ultrasonic cleaning using detergents and solvents, ultrasound has been effectively controlled to achieve reflection, refraction, and transmission according to the acoustic characteristics of the target object by setting conditions tailored to the purpose. This technology will be offered as a consulting service. Ultrasonic propagation characteristics: 1) Detection of vibration modes (changes in autocorrelation) 2) Detection of nonlinear phenomena (changes in bispectrum) 3) Detection of response characteristics (analysis of impulse response) 4) Detection of interactions (analysis of power contribution rates) Note: "R" is a free statistical processing language and environment. autcor: autocorrelation analysis function bispec: bispectrum analysis function

• pump
• Other measuring instruments
• others

Combination technology of function generator and ultrasonic probe

The Ultrasonic System Research Institute has developed ultrasonic oscillation control technology that enables the utilization of ultrasonic propagation states above 100 MHz by applying a function generator and ultrasonic probe to ultrasonic cleaners. This is a new application technology for precision cleaning, processing, and stirring, based on the measurement, analysis, evaluation, and technology of ultrasonic propagation states. By utilizing the acoustic properties (surface elastic waves) of various materials, it is possible to control ultrasonic stimulation above 100 MHz to the target object with an ultrasonic output of less than 20 W, even in a 1000-liter water tank. This was developed as an application method for nonlinear phenomena through an engineering (experimental and technical) perspective on elastic waves and an abstract algebraic ultrasonic model. The key point is to confirm the ultrasonic propagation characteristics of the target object, and it is important to set the oscillation conditions of the function generator as a control method for the original nonlinear resonance phenomenon (Note 1). Note 1: Original Nonlinear Resonance Phenomenon This refers to the resonance phenomenon of ultrasonic vibrations that occurs when the generation of harmonics caused by original oscillation control is realized at a high amplitude due to resonance phenomena.

• Analysis and prediction system
• Other measuring instruments
• others

Design, development, manufacturing, and technology of ultrasonic equipment tailored to specific purposes based on the measurement and analysis of ultrasonic vibrations—aging treatment of ultrasonic equipment.

Development of a Dedicated Ultrasonic Tank The Ultrasonic System Research Institute has developed a dedicated ultrasonic tank by applying measurement technology related to the propagation state of ultrasound. As a result of using the newly developed dedicated ultrasonic tank for ultrasonic cleaning and surface modification, it has become easier to control not only the utilization efficiency of ultrasound but also the propagation states of cavitation and acceleration. This represents a completely new manufacturing technology (Note) for tanks and surface treatment technology, and it has been confirmed to be a significant achievement through measurement and analysis of the states. Note: Original design, manufacturing, and adjustment methods. This method and technical know-how are offered as part of our consulting services. Ultrasonic Propagation Characteristics 1) Detection of vibration modes (changes in autocorrelation) 2) Detection of nonlinear phenomena (changes in bispectrum) 3) Detection of response characteristics (analysis of impulse response) 4) Detection of interactions (analysis of power contribution rates) Note: "R" is a free statistical processing language and environment. autcor: autocorrelation analysis function bispec: bispectrum analysis function mulmar: impulse response mulnos: power contribution rate

• pump
• Other measuring instruments
• others

Technology for controlling nonlinear phenomena of ultrasound.

The Ultrasonic System Research Institute has developed a technology to control nonlinear ultrasonic phenomena by utilizing the interactions generated from simultaneously oscillating two types of ultrasonic probes from one oscillation channel of a function generator. (Note: Nonlinear (resonance) phenomena refer to the resonance phenomenon of ultrasonic vibrations that occurs due to the generation of harmonics resulting from original oscillation control, achieving high amplitudes through resonance.) By optimizing the ultrasonic propagation characteristics of various materials to suit specific purposes, efficient ultrasonic oscillation control becomes possible. Through the measurement and analysis of sound pressure data from ultrasonic testers, this system technology allows for the dynamic changes of surface elastic waves to be controlled according to their intended use. In practical terms, the use of multiple (two types of) ultrasonic probes for multiple (two types of) oscillations (sweep oscillation, pulse oscillation) generates complex vibration phenomena (original nonlinear resonance phenomena), achieving high sound pressure propagation states at high frequencies, or low frequency propagation states with high sound pressure levels tailored to the desired natural frequency.

• Non-destructive testing
• Vibration and Sound Level Meter
• others

Leading to new applications of ultrasound from sound pressure and vibration data of ultrasound.

Application of ultrasonic sound pressure measurement, analysis, and evaluation technology The Ultrasonic System Research Institute has developed a method for the analysis and evaluation of ultrasound (system technology) that applies measurement, analysis, and control technology related to the nonlinearity of ultrasound. Using this technology, we will provide measurement, analysis, and evaluation support for ultrasonic devices. For specific support and costs, please contact us via email. *Comment* Currently, regarding the use of ultrasound, I believe it is very difficult to detect and confirm the optimal ultrasonic state for the intended purpose. Therefore, by incorporating "sound pressure data" into the daily management of ultrasound, we aim to resolve the relationship with the final evaluation state (defect rate, yield, etc.) through the accumulation and analysis of statistical data. By analyzing using time-series data analysis technology, effective improvements have been realized. As a result of continuing such improvements, the number of successful cases using low-output ultrasonic oscillation control has increased. We have been manufacturing and selling our original product: ultrasonic systems (sound pressure measurement analysis, oscillation control) since March 2021.

• Non-destructive testing
• Other measuring instruments
• others

Consulting support for the development of ultrasonic devices based on technology that controls surface acoustic waves through surface treatment of ultrasonic probe piezoelectric elements.

The Ultrasonic System Research Institute manufactures and sells ultrasonic systems utilizing the following original products: 1) Sound Pressure Measurement and Analysis System (Ultrasonic Tester) 2) Megahertz Ultrasonic Oscillation Control Probe 3) Ultrasonic Oscillation System (20 MHz type) Features of the Sound Pressure Measurement and Analysis System: Ultrasonic Tester 200 MHz type * Measurement (analysis) frequency range Specification: 0.01 Hz to 200 MHz * Capable of measuring surface vibrations * Continuous measurement for 24 hours * Simultaneous measurement of any two points * Display of measurement results in graph form * Includes software for time-series data analysis Overview Specifications of the Ultrasonic Probe Measurement range: 0.01 Hz to 200 MHz Oscillation range: 0.5 kHz to 25 MHz Propagation range: 0.5 kHz to over 900 MHz (confirmed and evaluated through analysis) Materials: Stainless steel, LCP resin, silicone, Teflon, glass, etc. Oscillation equipment example: Function generator Propagation Characteristics of the Ultrasonic Probe 1) Detection of vibration modes 2) Detection of nonlinear phenomena 3) Detection of response characteristics 4) Detection of interactions

• Non-destructive testing
• Other measuring instruments
• Other analytical equipment

Feedback analysis using multivariate autoregressive models for time series data: autocorrelation, power spectrum, bispectrum...

The Ultrasonic System Research Institute has developed a completely new technology for controlling the propagation state of surface elastic waves using its original product (ultrasonic tester). The ultrasonic sound pressure measurement and analysis technology developed so far will apply measurement, analysis, and evaluation techniques related to nonlinear phenomena in ultrasonics. It has become possible to implement new countermeasures based on vibration phenomena concerning vibrations and noise from buildings and roads, equipment, devices, walls, pipes, desks, handrails... as well as the vibrations at the moment of metal melting during welding and instantaneous vibrations during machining. Consulting services are available for this technology. Note: The following tools will be used for analysis Note: OML (Open Market License) Note: TIMSAC (TIMe Series Analysis and Control program) Note: "R," a free statistical processing language and environment autcor: autocorrelation analysis function bispec: bispectrum analysis function mulmar: impulse response analysis function mulnos: power contribution rate analysis function

• Vibration and Sound Level Meter
• Scientific Calculation and Simulation Software
• others

We manufacture and sell an "oscillation system at 20 MHz" that allows for easy control of megahertz ultrasonic oscillation.

The Ultrasonic System Research Institute has developed a megahertz ultrasonic oscillation control system that applies acoustic characteristic analysis and evaluation technology related to the manufacturing of original products: ultrasonic oscillation probes. This is a new application system for cleaning, modification, inspection, and more using ultrasonic waves. It is also possible to apply control through the combination of low-frequency vibrations and sounds. Developed from an engineering (experimental and technical) perspective on elastic waves and an abstract algebraic ultrasonic model, this application system technology has been created. The key point is the utilization of surface acoustic waves. By confirming the propagation characteristics of ultrasonic waves depending on the conditions of the target object (Note 1), it is important to address it as an original nonlinear resonance phenomenon (Notes 2, 3). Note 1: Propagation characteristics of ultrasonic waves - Nonlinear characteristics - Response characteristics - Fluctuation characteristics - Effects due to interactions Note 2: Original nonlinear resonance phenomenon The occurrence of harmonics generated by original oscillation control, realized at high amplitudes through resonance phenomena, leads to the resonance phenomenon of ultrasonic vibrations. Note 3: Transient ultrasonic stress wave

• Vibration and Sound Level Meter
• Scientific Calculation and Simulation Software
• others

-- Ultrasonic System (Sound Pressure Measurement Analysis, Oscillation Control) --

The Ultrasonic System Research Institute manufactures and sells a system that combines the "Ultrasonic Tester NA (recommended type)," which allows for easy measurement and analysis of ultrasound, and the "Ultrasonic Oscillation System (20 MHz)," which enables easy control of ultrasonic oscillation. We propose system configurations (custom-made ultrasonic probes) tailored to the intended use (price and performance: cleaning, processing, stirring, inspection, etc.). Original Products: System Overview (Standard System) - Ultrasonic System (Sound Pressure Measurement and Analysis, Oscillation Control 10 MHz Type) - Ultrasonic Tester NA 10 MHz Type - Oscillation System 20 MHz Type Price: 281,050 yen (including tax: 10% consumption tax)

• Non-destructive testing
• Vibration and Sound Level Meter
• others

Ultrasonic probe capable of controlling ultrasonic propagation conditions above 900 MHz.

The Ultrasonic System Research Institute offers custom-made ultrasonic probes capable of controlling ultrasonic propagation states above 900 MHz. We manufacture and develop original ultrasonic oscillation control probes tailored to your objectives. Ultrasonic Probe: General Specifications - Measurement Range: 0.01 Hz to 200 MHz - Oscillation Range: 0.5 kHz to 25 MHz - Propagation Range: 0.5 kHz to over 900 MHz (confirmed and evaluated through analysis) - Materials: Stainless steel, LCP resin, silicone, Teflon, glass, etc. - Oscillation Equipment: Example - Function Generator By understanding the acoustic properties of metals, resins, glass, etc., we achieve propagation states tailored to your needs regarding sound pressure level, frequency, and dynamic characteristics through oscillation control. This is a new foundational technology for precision cleaning, processing, stirring, inspection, etc., based on measurement, analysis, and evaluation techniques for ultrasonic propagation states. By utilizing the acoustic properties (surface elastic waves) of various materials (such as glass containers), ultrasonic stimulation to structures and machine tools weighing several tons can be controlled with ultrasonic output below 20 W, even in a 5000-liter water tank.

• Non-destructive testing
• Other analytical equipment
• others

Technology to control low-frequency resonance phenomena and high-frequency nonlinear phenomena.

The Ultrasonic System Research Institute has developed technology to manufacture ultrasonic probes that can control ultrasonic propagation states from 500 Hz to over 500 MHz, tailored to specific applications. Ultrasonic Probe: Overview Specifications Measurement Range: 0.01 Hz to 200 MHz Oscillation Range: 1.0 kHz to 25 MHz Propagation Range: 0.5 kHz to over 900 MHz (confirmed through acoustic pressure data analysis) Materials: Stainless steel, LCP resin, silicon, Teflon, glass, etc. Oscillation Equipment: Example - Function Generator By understanding the acoustic properties of metals, resins, glass, etc., and through oscillation control, we achieve propagation states tailored to specific purposes regarding acoustic pressure levels, frequencies, and dynamic characteristics. This is a new foundational technology for precision cleaning, processing, stirring, and inspection based on measurement, analysis, and evaluation techniques for ultrasonic propagation states. By utilizing the acoustic properties of various materials, ultrasonic stimulation can be controlled for structures and machine tools weighing several tons, even in a 3000-liter water tank, with ultrasonic output below 20 W. It was developed as an application method for nonlinear phenomena through an engineering (experimental and technical) perspective on elastic waves and an abstract algebraic ultrasonic model.

• Water Treatment
• Other measuring instruments
• others

Ultrasonic system combining "Ultrasonic Tester NA (10 MHz)" and "Ultrasonic Oscillator (20 MHz)"

An ultrasonic system that allows for easy measurement analysis and oscillation control. The Ultrasonic System Research Institute is publicly conducting experiments using a system that combines the "Ultrasonic Tester NA (recommended type)," which allows for easy measurement analysis of ultrasonic waves, and the "Ultrasonic Oscillation System (20 MHz)," which enables easy oscillation control of ultrasonic waves. Ultrasonic Probe: Overview Specifications - Measurement Range: 0.01 Hz to 200 MHz - Oscillation Range: 0.5 kHz to 25 MHz - Propagation Range: 0.5 kHz to over 900 MHz (confirmed and evaluated through analysis) - Materials: Stainless steel, LCP resin, silicone, Teflon, glass, etc. - Oscillation Equipment Example: Function Generator Note: Ultrasonic Propagation Characteristics 1) Detection of Vibration Modes (Changes in Autocorrelation) 2) Detection of Nonlinear Phenomena (Changes in Bispectrum) 3) Detection of Response Characteristics (Analysis of Impulse Response Characteristics) 4) Detection of Interactions (Analysis of Power Contribution Rates) Note: "R" Free Statistical Processing Language and Environment - autocor: Autocorrelation Analysis Function - bispec: Bispectrum Analysis Function - mulmar: Impulse Response Analysis Function - mulnos: Power Contribution Rate Analysis Function

• Water Treatment
• Other analytical equipment
• others

- Technology for controlling low-frequency resonance phenomena and high-frequency nonlinear phenomena based on sound pressure measurement analysis and evaluation.

The Ultrasonic System Research Institute manufactures and sells an "Oscillation System (20MHz)" that allows for easy control of megahertz ultrasonic oscillation. System Overview (Ultrasonic Oscillation System (20MHz)) Contents (20MHz Type) - Two ultrasonic oscillation probes - One set of function generator - One set of operation manual (USB memory) Features (20MHz Type) - Ultrasonic oscillation frequency Specification: 20kHz to 25MHz (or 24MHz) - Output range: 5mVp-p to 20Vp-p - Sampling rate: 200MSa/s (or 250MSa/s) This system utilizes commercially available function generators. We will propose a quoted price with a function generator set according to your needs. Standard Reference Example Oscillation System 20MHz starting from 80,000 yen November 2024: Development of megahertz flow-type ultrasonic technology November 2024: Development of ultrasonic sound pressure data analysis and evaluation technology December 2024: Development of nonlinear oscillation control technology for ultrasonic probes January 2025: Development of megahertz flow-type ultrasonic system

• Non-destructive testing
• Vibration and Sound Level Meter
• others

An experimental system for controlling chemical reactions using megahertz ultrasound.

The Ultrasonic System Research Institute has developed a technology for controlling chemical reactions using ultrasound by utilizing the technology for controlling nonlinear phenomena of ultrasound (acoustic flow). This technology controls ultrasound (cavitation and acoustic flow) tailored to specific purposes through ultrasonic control using a megahertz ultrasonic oscillation probe by measuring and confirming the interactions within the container. Note: Ultrasonic Control By setting the oscillation conditions for sweep oscillation and pulse oscillation using two types of nonlinear resonant ultrasonic oscillation probes, it dynamically controls high-frequency propagation states above 30 MHz through high sound pressure resonance phenomena and harmonic generation phenomena (nonlinear phenomena). Note: Ultrasonic Control "Precision Cleaning Example" Sweep Oscillation: 70 kHz – 15 MHz, 15 W Pulse Oscillation: 13 MHz, 8 W Note: Ultrasonic Control "Nano-Level Stirring Example" Sweep Oscillation: 880 kHz – 22 MHz, 12 W Pulse Oscillation: 14 MHz, 10 W In particular, the dynamic characteristics of harmonics through acoustic flow control enable reactions and responses at the nano level.

• Other measuring instruments
• Scientific Calculation and Simulation Software
• others

Original ultrasonic probe for megahertz ultrasonic sweep oscillation and pulse oscillation system.

The Ultrasonic System Research Institute (Location: Hachioji City, Tokyo) has developed ultrasonic oscillation control technology that enables the use of ultrasonic propagation states above 900 MHz with oscillation below 20 MHz by utilizing a function generator and an original ultrasonic oscillation probe in relation to ultrasonic cleaners. This is a new application technology for precision cleaning, processing, and stirring based on the measurement, analysis, evaluation, and technology of ultrasonic propagation states. By utilizing the acoustic properties (surface elastic waves) of various materials, ultrasonic stimulation to the target object can be controlled with an ultrasonic output of less than 20W, even in a 5000-liter water tank. It was developed as an application method for nonlinear phenomena through an engineering (experimental and technical) perspective on elastic waves and an abstract algebraic ultrasonic model. Ultrasonic Probe: Outline Specifications - Measurement Range: 0.01 Hz to 200 MHz - Oscillation Range: 1.0 kHz to 25 MHz - Propagation Range: 0.5 kHz to over 900 MHz (confirmation of acoustic pressure data analysis) - Material: Stainless steel, LCP resin, silicon, Teflon, glass, etc. - Oscillation Equipment: Example - Function Generator - Measurement Equipment: Example - Oscilloscope

• Non-destructive testing
• Scientific Calculation and Simulation Software
• others

We will disclose the manufacturing know-how of ultrasonic probes - applying feedback analysis technology, ultrasonic sound pressure data analysis technology.

The Ultrasonic System Research Institute manufactures and sells the "Ultrasonic Tester NA (Recommended Type)," which makes ultrasonic measurement and analysis easy. We provide manufacturing technology and data analysis evaluation technology, including know-how for this system. System Overview (Recommended System: Ultrasonic Tester NA) Contents: - One dedicated probe for measuring sound pressure of ultrasonic cleaners - One general-purpose ultrasonic measurement probe - One oscilloscope set - One set of analysis software, manuals, and various installation sets Features: - Measurement (analysis) frequency range: Specification from 0.1 Hz to 10 MHz - Ultrasonic oscillation: Specification from 1 Hz to 100 kHz - Capable of measuring surface vibrations - Continuous measurement for 24 hours - Simultaneous measurement of any two points - Measurement results displayed in graphs - Analysis software for time-series data included This is a measurement system using ultrasonic probes. The ultrasonic probe is attached to the target object for oscillation and measurement. The measured data is analyzed considering position, state, and elastic waves, detecting various acoustic performances.

• Water Treatment
• Measurement and analysis equipment leasing and rental
• others

An article about the resin-based lightweight formwork system "PERI DUO" has been published in the "Construction News" (November 7, 2025)! "PERI DUO" is a new system formwork made of resin that can be used for walls. It is made from a newly developed material called "Politec," which is high-strength and lightweight. With fewer components, it is easy to handle. It allows for increased reuse and is an environmentally friendly lightweight formwork that is flexible on the construction site! 【DUO Product Features】 ■ New system formwork made of resin ■ High strength and lightweight ■ Fewer components and easy to handle ■ 100% recyclable *For more details about this product, please feel free to contact us. PERI Japan Co., Ltd.

[To the owners of parking lots and parking lot construction companies] "I'm worried about not colliding with pedestrians when leaving the parking lot in my car..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Departure Warning Sensor] that detects vehicle departures using various sensors and alerts the surroundings with LED lights and buzzers. The device consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *Please note that a separate control panel including the controller and switching power supply (24V) is required when using the departure warning system. *We kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breakers, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. We hope this will contribute to safer vehicle passage for everyone. ◎ For more details, please contact us or download the catalog.

【New Product Announcement】 UV - Ultra-Compact Irradiator LSP26FUV Series Released High intensity yet compact, a palm-sized cube-type ultra-compact UV irradiator. It offers a variety of UV wavelengths and can be used for a wide range of applications. Due to its compact size that fits in the palm of your hand, it is very convenient for simple inspections and research experiments, as well as other small tasks. *Details about the product features and specifications are currently being prepared. They will be published soon, so please wait a little longer. For more information, please feel free to contact us.

Japan Aluminum Co., Ltd. will exhibit at the High-Performance Materials Week "Adhesive and Joining EXPO" ~Proposing solutions for joining aluminum and resin~ This exhibition is one of the events that make up the "High-Performance Materials Week," which features cutting-edge material technologies, and is one of the largest comprehensive exhibitions in Japan for adhesives, joining machines, and fastening technologies. The Japan Aluminum Group will showcase various functional surface treatments currently under development, focusing on the joining solution PAL-fit for aluminum and resin. We sincerely look forward to your visit and hope you take this opportunity to see our offerings. https://www.nikkeikinholdings.co.jp/news/news/p2025110501hd.html Event Dates: November 12 (Wed) to 14 (Fri), 2025 10:00 AM to 6:00 PM (Ends at 5:00 PM on the final day) Venue: Makuhari Messe Hall 7 (Chiba City, Chiba Prefecture) Our Booth: Hall 7, 42-26

In recent years, with the increasing push for DX (digital transformation) and valuable feedback from all users in the field, we will be fully renewing "Compass PLUS." The new Compass PLUS will leverage its traditional strengths while completely revamping its design, functionality, and usability, thereby further enhancing its value in practical use. The official release is as follows, so please wait a little longer until then. 1) Improved visibility and operability 2) Enhanced intuitiveness 3) Streamlined information sharing These are the main points of improvement, and it will be available starting December 16, 2025. For an overview of the renewal, please download the materials. We are also planning an online briefing session, so please download the materials for more details as well. Renewal date: Tuesday, December 16, 2025 Temporary suspension period: Monday, December 15, 2025, 17:00 – 19:00 *Due to the renewal, data updates for observation devices (wave height, weather, water level, noise and vibration) will be suspended during the temporary suspension period. However, viewing of forecast information and other various information will still be possible as usual.