Ultrasonic Oscillation System Using Commercial Function Generator (US-2024XXXX Specification)

Dynamic control technology of ultrasound through sweeping oscillation of multiple ultrasonic probes.

The Ultrasonic System Research Institute has developed a classification method for the phenomenon of ultrasonic vibrations propagation through the measurement and analysis of ultrasonic propagation states. Based on this classification, we have developed a nonlinear sweep oscillation control technology for ultrasound using a nonlinear resonant ultrasonic oscillation probe. This ultrasonic sweep oscillation control technology dynamically controls the linear and nonlinear resonance effects according to the main frequency (power spectrum) related to the propagation state of the ultrasound, based on the dynamic characteristics (changes in nonlinear phenomena). From previous experiments and data measurement analyses, we have been able to classify effective utilization methods into the following four recommended controls: 1. Two types of sweep oscillation control (linear type) 2. Three types of sweep oscillation control (nonlinear type) 3. Four types of sweep oscillation control (mixed type) 4. Dynamic control (variable type) based on the combinations above. Furthermore, the variable type can be classified into the following three control types based on the sweep oscillation conditions: 1. Linear variable control type 2. Nonlinear variable control type 3. Mixed variable control type (dynamic variable type)

• Non-destructive testing
• Other measuring instruments
• others

Application of processing technologies utilizing nonlinear phenomena of ultrasound (acoustic flow, generation of harmonics, etc.) for nano-level emulsification, dispersion, and grinding.

- Technology for controlling nonlinear phenomena of ultrasound: Nano-level stirring, emulsification, dispersion, and grinding technology - The Ultrasonic System Research Institute has developed effective stirring (emulsification, dispersion, grinding) technology utilizing "technology for controlling nonlinear phenomena of ultrasound (acoustic flow)." This technology controls ultrasound (cavitation, acoustic flow) by utilizing (evaluating) the ultrasonic propagation characteristics (analysis results) of indirect containers, ultrasonic tanks, and other equipment through surface inspection. Ultrasonic propagation characteristics: 1) Detection of vibration modes (changes in autocorrelation) 2) Detection of nonlinear phenomena (changes in bispectrum) 3) Detection of response characteristics (analysis of impulse response) 4) Detection of interactions (analysis of power contribution rate) Note: "R" is a free statistical processing language and environment. autcor: autocorrelation analysis function bispec: bispectrum analysis function mulmar: impulse response analysis function mulnos: power contribution rate analysis function

• Secondary steel products
• Non-destructive testing
• Other Hydrogen/Fuel Cells

Development technology for ultrasonic probes and ultrasonic oscillation control systems - Aging treatment of piezoelectric elements.

The Ultrasonic System Research Institute has developed a technology to adjust the ultrasonic propagation characteristics of ultrasonic elements (piezoelectric elements) based on measurement, analysis, and evaluation results regarding the propagation state of ultrasound, utilizing ultrasonic systems (sound pressure measurement, oscillation control). To utilize the surface acoustic waves of ultrasonic elements (piezoelectric elements) according to specific purposes, special surface treatments are performed on the element surface. It allows for adjustments to the sound pressure level and frequency range of the propagating ultrasound. By realizing dynamic ultrasonic propagation control through the combination of ultrasound (oscillation control) and surface acoustic waves, it has evolved into an adjustment technology based on the characteristics derived from the analysis of sound pressure data. The key point is the optimization of oscillation conditions (waveform, output, frequency, variations, etc.) that enables efficient control of nonlinear phenomena caused by surface acoustic waves. As specific technologies mentioned above, we provide consulting services for system technologies that control nonlinear phenomena (bi-spectral) resulting from the interaction of ultrasound with tanks and tools, tailored to specific purposes (cleaning, stirring, processing, welding, surface treatment, stress relief treatment, inspection, etc.).

• Analysis and prediction system
• Scientific Calculation and Simulation Software
• others

Feedback analysis using multivariate autoregressive models for time series data: autocorrelation, power spectrum, bispectrum...

The Ultrasonic System Research Institute has developed a completely new technology for controlling the propagation state of surface elastic waves using its original product (ultrasonic tester). The ultrasonic sound pressure measurement and analysis technology developed so far will apply measurement, analysis, and evaluation techniques related to nonlinear phenomena in ultrasonics. It has become possible to implement new countermeasures based on vibration phenomena concerning vibrations and noise from buildings and roads, equipment, devices, walls, pipes, desks, handrails... as well as the vibrations at the moment of metal melting during welding and instantaneous vibrations during machining. Consulting services are available for this technology. Note: The following tools will be used for analysis Note: OML (Open Market License) Note: TIMSAC (TIMe Series Analysis and Control program) Note: "R," a free statistical processing language and environment autcor: autocorrelation analysis function bispec: bispectrum analysis function mulmar: impulse response analysis function mulnos: power contribution rate analysis function

• Vibration and Sound Level Meter
• Scientific Calculation and Simulation Software
• others

Control technology for acoustic flow (the main cause of ultrasonic effects: nonlinear phenomena) using ultrasound and fine bubbles.

The Ultrasonic System Research Institute has developed a method (system) for the <analysis and evaluation> of ultrasound, applying "measurement, analysis, and control" technology related to the nonlinearity of ultrasound. We provide consulting for a degassing microbubble generation liquid circulation system utilizing this technology. To utilize (control) the complex and changing conditions of ultrasound in a stable state, we conduct consulting to add the degassing microbubble generation liquid circulation system to specific tanks present on-site. 1: Explanation of principles 2: Specific proposals tailored to the cleaning machine (device) 3: Explanation of know-how 4: Explanation of verification methods, adjustment methods, and maintenance methods Development of nonlinear vibration control technology using fine bubbles and megahertz ultrasound Regarding this technology, we provide consulting as "vibration measurement technology utilizing ultrasound." Ultrasound propagation characteristics: 1) Detection of vibration modes (changes in self-correlation) 2) Detection of nonlinear phenomena (changes in bispectrum) 3) Detection of response characteristics (analysis of impulse response characteristics) 4) Detection of interactions (analysis of power contribution rates)

• pump
• Other analytical equipment
• others

Dynamic control technology for ultrasonic cleaning machines.

The Ultrasonic System Research Institute has developed ultrasonic cleaning technology utilizing the "Constructal Law" related to flow and shape. <References> 1) On Vibration From the Royal Institution's 133rd lecture "Vibration" I intend to describe almost all of the important fields of mechanical engineering here. [Author] Richard B. Bishop [Translator] Hidetaro Nakayama, Kodansha (1981, B-471) 2) Flow and Shape The evolution of all shapes is governed by the "Constructal Law," which aims to improve flow! [Authors] Adrian Bejan, J. Peder Zane [Translator] Hiroyuki Shibata, [Commentator] Shigeo Kimura, Kinokuniya (2013) 3) How Cybernetics Was Born [Author] Norbert Wiener [Translator] Yasuo Shizume, Misuzu Shobo (1956) Using the above as references and hints, we have organized the technology for measuring and utilizing "nonlinear effects" in ultrasonic propagation phenomena according to the "Constructal Law," which aims to improve flow, culminating in ultrasonic cleaning technology.

• pump
• Drainage and ventilation equipment
• others

Analysis of sound pressure measurement data (autocorrelation, power spectrum, bispectrum, power contribution rate, impulse response, etc.) evaluation and technology.

The Ultrasonic System Research Institute has developed a technology to optimize ultrasonic propagation systems that enable control of resonance and nonlinear phenomena based on various analysis results of ultrasonic propagation states using an original ultrasonic system (sound pressure measurement analysis and oscillation control). In contrast to existing control technologies, this technology utilizes new measurement and evaluation parameters (note) related to the entire propagation path of ultrasonic vibrations, including various propagation tools, to achieve dynamic propagation states of ultrasound tailored to specific applications (cleaning, stirring, processing, etc.). This is a method and technology that can be applied immediately, and we offer it as consulting services (with increasing achievements in ultrasonic processing, precision cleaning at the nano level, stirring, etc.). Note: The original technology product (ultrasonic sound pressure measurement analysis system) measures, analyzes, and evaluates dynamic changes in the propagation state of water tanks, transducers, target objects, and tools. (Parameters: power spectrum, autocorrelation, bispectrum, power contribution rate, impulse response characteristics, etc.)

• Non-destructive testing
• Scientific Calculation and Simulation Software
• others

Development technology of original ultrasonic systems - technology to control nonlinear phenomena of ultrasound -

The Ultrasonic System Research Institute has developed a technology for controlling the propagation of ultrasound through sweep oscillation using ultrasonic probes. Based on the propagation characteristics of the ultrasonic oscillation control probes, we set the conditions for sweep oscillation for each ultrasonic probe according to the intended use and interaction. By considering the vibration modes of the target objects, devices, tanks, and tools, it becomes possible to control low-frequency resonance phenomena through sweep oscillation conditions tailored to the system's vibration system. Even with an output of around 30W, it is possible to control the propagation of high sound pressure and frequency ultrasonic vibrations in tanks of 3000-5000 liters. <<Specific Example>> As a dynamic change, simultaneously with low-frequency resonance phenomena, the sweep oscillation conditions of the ultrasonic probe at 1-10 MHz enable the generation of 10th, 30th, 100th... harmonics, which can be applied to precision cleaning and nano-level dispersion. The key point is to analyze and evaluate the dynamic vibration characteristics of the system based on the measurement and analysis of sound pressure data. Propagation characteristics of ultrasound: 1) Vibration modes 2) Nonlinear phenomena 3) Response characteristics 4) Interactions

• Non-destructive testing
• Vibration and Sound Level Meter
• others

To stabilize the effects of cavitation, a statistical perspective is essential — a technology to optimize nonlinear ultrasonic phenomena according to specific purposes.

<Regarding the Creation of Logical Models> (Using Information Quantity Criteria) 1) Based on various fundamental technologies, clearly recognize the "information data group," DS = (D1, D2, D3), related to the subject, consisting of: D1 = Objective knowledge (theory supported by academic logic) D2 = Empirical knowledge (results obtained so far) D3 = Observational data (current state) and create multiple model proposals from its organizational use. 2) Understand statistical thinking as a method of realizing information acquisition through the composition of the information data group (DS) and the repeated proposal and verification of models based on it. 3) Determine the optimal model by comparing various models using evaluation methods such as AIC. 4) Construct ultrasonic devices and systems based on the created models. 5) Considering time and efficiency, the following responses are proposed: 5-1) Taking into account the "logical model creation matters," create "intuitive models" for multiple people to examine. 5-2) Modify and review the models based on actual data and new information. 5-3) Enter into specific discussions about devices and systems based on models that the review members can agree upon.

• Other analytical equipment
• Scientific Calculation and Simulation Software
• others

Application technology for ultrasonic sound pressure measurement, analysis, control, and evaluation systems.

The Ultrasonic System Research Institute has developed technology to control resonance and nonlinear phenomena in the propagation state of surface acoustic waves through the control of ultrasonic oscillation, using a combination of low and high frequencies. By utilizing new ultrasonic propagation materials (such as stainless steel wire and titanium straws), efficient ultrasonic applications tailored to specific purposes become possible. Through the measurement and analysis of sound pressure data from ultrasonic testers, this system technology controls the complex changes in surface acoustic waves according to the intended use. Practically, by using multiple (two types of) ultrasonic probes to generate multiple (two types of) oscillations (sweep oscillation and pulse oscillation), complex vibration phenomena (original nonlinear resonance phenomena) are created, achieving high-frequency propagation states at high sound pressure or low-frequency propagation states tailored to the desired natural frequency. In particular, by optimizing the vibration characteristics of tanks and pumps with megahertz ultrasound, efficient ultrasonic control is realized (propagating through 3000 liters of cleaning solution at a 30W output).

• pump
• Septic tank equipment
• others

Application of measurement, analysis, and evaluation techniques related to ultrasonic propagation conditions — Providing know-how for optimal control of ultrasound.

The Ultrasonic System Research Institute has developed design and manufacturing technology for ultrasonic dedicated tanks by applying measurement and analysis techniques related to ultrasonic propagation conditions. With the technology developed this time, we can achieve efficient utilization of ultrasound suitable for ultrasonic cleaning and surface modification, as well as dynamic control of cavitation and acoustic flow, and propagation conditions for target objects, for ultrasonic dedicated tanks ranging from a maximum length of 3 cm (liquid volume 5 cc) to 600 cm (liquid volume 8000 liters), tailored to specific purposes. In conventional tank (or transducer) design and manufacturing, insufficient consideration of acoustic characteristics often leads to uneven and unstable phenomena due to interference and attenuation of vibrations, making ultrasonic lifespan and tank troubles more likely to occur. This technology can detect issues (various distributions of cleaning solutions, installation methods of tanks and transducers) even in existing tanks and transducers, allowing for improvements and enhancements. --- Provided Know-How --- 0) Design and manufacturing methods for devices 1) ON/OFF control of ultrasound 2) ON/OFF control of liquid circulation 3) Provision of optimization know-how 4) Methods for utilizing megahertz ultrasound

• pump
• Water Treatment Plant
• others

Development of an original ultrasonic system utilizing surface elastic wave control technology based on sound pressure measurement analysis.

The Ultrasonic System Research Institute has developed applied technologies that utilize surface acoustic waves through ultrasonic control. By combining ultrasound and surface acoustic waves, we achieve dynamic control of ultrasonic propagation. The key point is the ability to efficiently control nonlinear phenomena caused by surface acoustic waves. As specific technologies, we have developed system technologies that control nonlinear phenomena (bi-spectral) resulting from the interaction of ultrasound with water tanks and tools, tailored to specific purposes (cleaning, stirring, stress relief, inspection, etc.). As a result of utilizing measurement and analysis techniques for ultrasonic propagation states, we have confirmed the realization of harmonic control and the ability to adjust nonlinear phenomena. Our know-how lies in confirming and responding to the acoustic characteristics of the system (measurement, analysis, evaluation).

• Secondary steel products
• Other analytical equipment
• others

Optimization of cavitation and acoustic flow using a degassed fine bubble generation liquid circulation device.

The Ultrasonic System Research Institute has developed an ultrasonic cleaning machine utilizing microbubbles, based on measurement, analysis, and evaluation techniques related to ultrasonic propagation phenomena, which can also be used for ultrasonic processing, stirring, and chemical reactions. Recommended System Overview 1: Two types of ultrasonic transducers (standard types 38 kHz, 72 kHz) that perform surface modification treatment using ultrasonic waves and microbubbles. 2: An ultrasonic dedicated tank (standard type, inner dimensions: 500*310*340mm) that performs surface modification treatment using ultrasonic waves and microbubbles. 3: A degassing and microbubble generation liquid circulation system. 4: An optimization control system for ultrasonic output and liquid circulation via a control device. 5: An acoustic pressure management system using an ultrasonic tester. *Features This is an effective device utilizing an ultrasonic dedicated tank. Due to the efficient use of ultrasonic waves, the strength and durability of a standard tank are insufficient. Depending on the target and purpose of cleaning, stirring, and surface modification, two types of ultrasonic transducers are combined and controlled. The recommended combination is in the state of 38 kHz and 72 kHz. Technology for stably utilizing fine bubbles of 20 μm or less.

• pump
• Scientific Calculation and Simulation Software
• others

On October 1, 2025, we will release a cloud-managed turbidity meter and pH meter as a new option for the Disaster Prevention System ZEROSAI and Compass PLUS. Features: - Centralized management of turbidity and pH in the cloud along with weather information - Automatic notifications via electronic bulletin boards and business chat* when standard values are exceeded - Observation data can be output in PDF or CSV format *ZEROSAI can automatically notify through the following business chats: LINE WORKS, direct, WowTalk, Microsoft Teams *For more details, please visit our website or feel free to contact us.

Thank you very much for visiting our company website and catalog, and for your interest in our diesel engine generators. From customer surveys, the most common feedback we received was: - I want to see the actual generators that have been installed. - I want to see them operating under real load. - I want to hear the opinions of companies that have installed them. - I want to see the generators in operation before making a purchase. After all, it’s understandable to feel worried about purchasing a generator without seeing the actual unit first, right? As the saying goes, "Seeing is believing," so we will be holding this tour. It will take place in that area of the Kanto region, where summer temperatures exceed 40°C. We successfully operated our generators this summer as well, so we are confident in handling the heat (sweat). Additionally, it has been confirmed that our generators equipped with the world-leading "Scania engine" are "fuel-efficient." This will surely help reduce daily operating costs. Please note that while we will provide kind and courteous assistance, the meeting and dispersal will be at the site (transportation costs and other expenses will be borne by the customer), so please understand this in advance. Contact: Kaneko

In the northern part of the Kanto Plain, in Utsunomiya City, Tochigi Prefecture, a solar power plant utilizing Grace Solar's CT foundation single-pole ground installation system is operating steadily. Utsunomiya City, one of Japan's important industrial hubs, has extremely high demands for quality and reliability in infrastructure, and this project fully demonstrates the exceptional capabilities of Grace Solar products in addressing complex geological conditions and high standards. The innovative design of the CT single-pole system effectively adapts to the local soil characteristics, ensuring the robustness of the foundation. During construction, the team strictly adhered to Japan's solar installation standards, establishing a solid foundation for the smooth delivery of the project by ensuring the precision of each construction task. This mounting system optimizes structural mechanical design, guaranteeing support strength while significantly reducing the amount of materials used and on-site work, thereby improving construction efficiency. It ensures particularly excellent pressure resistance against common environmental factors in Japan, such as seasonal rainfall, guaranteeing the long-term stability of the solar power plant under various conditions.

Event Period: October 8 (Wed) to October 10 (Fri) 10:00 AM to 5:00 PM (until 4:00 PM on the last day) Venue: Tokyo International Exhibition Center "Tokyo Big Sight" West and South Exhibition Halls, Booth Number: South 3 Hall S-5054 From October 8 (Wed) to October 10 (Fri), Matsuroku will be exhibiting at the "H.C.R. 2025 52nd International Welfare Equipment Exhibition & Forum" held at Tokyo Big Sight's West and South Exhibition Halls. At our booth, you can see a variety of items, including our residential renovation handrails "Free R Rail" and "Straight EZ Rail," as well as welfare equipment "Tayo Rail UPDATE" and "Tayo Rail SOTOE," featuring many new products set to launch this autumn. Additionally, we will have exclusive novelties featuring our official character "Asunyan" that you can only get here! You will have the opportunity to see and touch popular products as well as new items, so please take this chance to visit us. We sincerely look forward to your attendance. ▽ Official website of the International Welfare Equipment Exhibition 2025 https://hcr.or.jp/

We have started selling an electric automatic coin counter that sorts and calculates a large amount of coins at once. Counting coins manually can be time-consuming and prone to errors. By using the electric automatic coin counter, you can simply insert the coins, and it will sort different types of coins automatically. It also calculates the quantity and total amount automatically.