Sensors - メーカー・企業630社の製品一覧とランキング | イプロス

更新日： 集計期間:Jan 28, 2026～Feb 24, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。

Sensorsのメーカー・企業ランキング

更新日： 集計期間:Jan 28, 2026～Feb 24, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。

  1. WorldLink&Company SkyLink Japan Kyoto//Other construction industries
  2. ビーイーエージャパン Kanagawa//Building materials, supplies and fixtures manufacturers
  3. セキュリティハウス Okayama//Electrical equipment construction business
  4. 4 GRIFFY Tokyo//others
  5. 5 ホトロン Tokyo//Building materials, supplies and fixtures manufacturers
企業ランキングへ

Sensorsの製品ランキング

更新日： 集計期間:Jan 28, 2026～Feb 24, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。

  1. Drone/UAV Surveying LiDAR [Case studies available & demonstrations possible] WorldLink&Company SkyLink Japan
  2. Ondroid Temperature and Humidity Measurement System [NETIS Registered] GRIFFY
  3. Rear Confirmation Sensor "Truck Sonar"
  4. 4 3D Laser Sensor for Sheet Shutter "Wide Scan" ビーイーエージャパン
  5. 5 Passive Sensor Surface Surveillance Type for 30m PA-8030 セキュリティハウス

Sensorsの製品一覧

2851～2880 件を表示 ／ 全 2904 件

表示件数
Explosion-proof infrared sensor PXH-200EXH

Explosion-proof infrared sensor PXH-200EXH

Infrared sensors that can be used in hazardous locations such as oil refineries, oil storage facilities, gas holders, and chemical factories.

This is a high-performance outdoor long-range infrared sensor that combines intrinsic safety explosion-proof structure and pressure-resistant explosion-proof structure. ■ High-performance explosion-proof sensor with a wide range of applications This product is an explosion-proof infrared sensor that complies with the "Explosion Protection Guidelines for Factory Electrical Equipment (Gas and Vapor Explosion 2006)" by the Japan Industrial Safety and Health Association. It features an explosion-proof structure of 'iad2G4' that combines "intrinsic safety explosion-proof (ia)" and "pressure-resistant explosion-proof (d)", making it suitable for use in Class I and Class II hazardous locations. It has a wide application range for target gases, covering explosion grades 1 to 2 and ignition grades G1 to G4, and is compatible with most explosive gases. ■ Dual modulation method By adopting our unique dual modulation method for the infrared beam, we enhance the ability to distinguish between ambient light (such as sunlight and car headlights), achieving highly reliable outdoor surveillance. ■ Two types: "L" type and "H" type To prevent mutual interference, we offer two types with different frequencies: "L" type and "H" type, allowing for multi-stage surveillance and long-distance linear span monitoring. ■ Equipped with a light reception sensitivity indicator The light reception sensitivity indicator allows for easy adjustment of the optical axis.

  • Security Sensor Systems
  • Security devices
  • Sensors

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Explosion-proof infrared sensor PXH-400EXL

Explosion-proof infrared sensor PXH-400EXL

Infrared sensors that can be used in hazardous locations such as oil refineries, oil storage bases, gas holders, and chemical factories.

This is a high-performance outdoor long-range infrared sensor that combines intrinsic safety explosion-proof construction and pressure-resistant explosion-proof construction. ■ High-performance explosion-proof sensor with a wide application range This product is an explosion-proof infrared sensor that complies with the "Guidelines for Explosion Protection of Electrical Equipment in Factories (Gas Vapor Explosion 2006)" by the Japan Industrial Safety and Health Association. It features an explosion-proof structure of 'iad2G4' that combines "intrinsic safety explosion-proof (ia)" and "pressure-resistant explosion-proof (d)", making it suitable for use in Class I and Class II hazardous locations. It has a wide application range for target gases, covering explosion grades 1 to 2 and ignition grades G1 to G4, making it compatible with most explosive gases. ■ Dual modulation method By adopting our unique dual modulation method for the infrared beam, we enhance the ability to distinguish between external light (such as sunlight and car headlights), achieving reliable outdoor surveillance. ■ Two types: "L" type and "H" type To prevent mutual interference, we offer two types with different frequencies: "L" type and "H" type, allowing for multi-stage surveillance and long-distance linear span monitoring. ■ Equipped with a light reception sensitivity indicator The light reception sensitivity indicator allows for easy adjustment of the optical axis.

  • Security Sensor Systems
  • Security devices
  • Sensors

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Light-type active sensor DA-3902

Light-type active sensor DA-3902

New design that reduces protrusion during installation without a target.

■Realization of a maximum installation height of 4m without a target Even with high doors of 4.0m, it is possible to achieve an open entrance while maintaining safety with the doorway monitoring function. It can also accommodate entrances of industrial facilities. ■Industry-leading 60 spots Maintaining a high-density area of 60 spots at installation heights from 2.0m to 4.0m reduces the risk of contact with doors due to rushing into the entrance or diagonal approaches. ■Equipped with ECO mode function! It can reduce unnecessary opening time of automatic doors. ■Easy operation confirmation with colored LEDs In detection range confirmation mode, the color of the displayed LEDs changes for each detection row, allowing for area measurement and identification of rows experiencing false activations. During monitoring, the presence or absence of snow and insect mode settings can be distinguished by color. ■Improved area fine-tuning function Adjustment of width and depth by one row each is now possible, allowing for precise detection areas tailored to the site while maintaining high density. ■Strengthened measures against false activations due to snow Snow mode is divided into three levels, enhancing measures against false activations compared to conventional products and reducing sensitivity decline.

  • Security Sensor Systems
  • Security devices
  • Sensors

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Infrared Beam Switch Opposing Type Standard Specification for 10m DS-10N

Infrared Beam Switch Opposing Type Standard Specification for 10m DS-10N

It can be easily installed with a super compact controller and a detachable connection cable.

■Realization of compact controller This is a small controller with dimensions of W: 45mm H: 94mm D: 29mm, making it easy to install inside the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut. ●Cable length: 5m (for 6m DS-6N series, for 4m DS-4RN series) ●Cable length: 10m (for 10m DS-10N series) ■Slim sensor head can be installed with one touch The sensor head adopts a one-touch installation type that can be installed simply by pushing it into a pre-drilled hole (Φ12mm). Moreover, the diameter of the ring cover has been increased from the conventional 12mm to 15mm, improving workability. ■Built-in sensitivity volume It has a built-in sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■User-friendly design ●High-reliability design that is hardly affected by external light disturbances such as sunlight ●Convenient operation indicator light for operation confirmation (Green LED: always on, turns off when detecting)

  • Security Sensor Systems
  • Security devices
  • Sensors

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Infrared Beam Switch for 6m Cold Climate Specification DS-6TNY

Infrared Beam Switch for 6m Cold Climate Specification DS-6TNY

The controller unit has been miniaturized, and the wires can be freely cut. By adopting a scanning method, mutual interference between the upper and lower sections is prevented.

■Realization of compact controller Achieved a compact controller with dimensions W: 45mm H: 120mm D: 29mm. It can be installed in various locations within the door engine. ■Connection cables can be freely cut Depending on installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut, eliminating the need to bundle them inside the door engine as was done traditionally. ■Can be used as a single beam It can also be used as a single beam, allowing for initial installation as a single beam and later expansion to a double beam by adding a sensor head if needed. ■Adoption of scanning method The adoption of a scanning method ensures there is no mutual interference between the upper and lower sections. Therefore, there is no need to interchange the light emitters and receivers of the upper and lower sections during installation. ■Built-in sensitivity volume It has a built-in sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance.

  • Security Sensor Systems
  • Security devices
  • Sensors

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Infrared Beam Switch for 10m Cold Climate Specification DS-10TNY

Infrared Beam Switch for 10m Cold Climate Specification DS-10TNY

The controller section is miniaturized, and the wires can be freely cut. By adopting a scanning method, mutual interference between the upper and lower layers is prevented.

■Realization of compact controller Achieved a compact controller with dimensions W: 45mm H: 120mm D: 29mm. It can be installed in various locations within the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut, eliminating the need to bundle them inside the door engine as before. ■Can be used as a single beam It can also be used as a single beam, allowing for initial installation as a single beam, with the option to add sensor heads later to use it as a double beam if needed. ■Adoption of scanning method The adoption of a scanning method ensures there is no mutual interference between the upper and lower sections. Therefore, there is no need to interchange the upper and lower light emitters and receivers during installation. ■Equipped with sensitivity volume It is equipped with a sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■Slim sensor head can be installed with one touch The sensor head uses a one-touch installation type that can be installed simply by drilling a hole (Φ12mm) and pushing it in. Additionally, the diameter of the ring cover has been increased from the conventional 12mm to 15mm, improving workability.

  • Security Sensor Systems
  • Security devices
  • Sensors

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Life Safety Sensor - Light Beam Type, Exposure Type - SAS-7R

Life Safety Sensor - Light Beam Type, Exposure Type - SAS-7R

We adopted a light beam method that is not affected by temperature changes. It detects distances using a new method, capable of sensing heights above 60 cm from the floor.

■Overview ● Used in the Life Safety Notification System. ● Connects to life safety notification devices, and will notify if the sensor does not detect for a set period of time. ■Features ● Since it uses a light beam to measure distance, it does not react to temperature changes such as heating, cooling, sunlight, or drafts. ● If the area changes continuously for more than 30 minutes, such as when items are placed, it automatically adjusts the detection height independently for each beam. ● With a standard ceiling height of 2.5m, it can detect up to a height of 1.9m, so it will not detect pets, small animals, or robotic vacuum cleaners. ■Main Specifications ● A total of 7 beams can be adjusted in three stages: 0°, 3°, and 6°. ● The areas at both ends can be set in three patterns: +0.2m/active/inactive. ● The green LED display can be set to either always off or off during detection. Installation ● Suitable for the rooms of elderly residents living alone in senior housing. ● Available in two types: "exposed type" for easy installation and "embedded type" that matches the installation location.

  • Security Sensor Systems
  • Security devices
  • Sensors

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Passive Sensor Round Surveillance Type PA-6810WA

Passive Sensor Round Surveillance Type PA-6810WA

Wide-base passive sensor with built-in anti-blind function.

■Anti-Blind Function This function detects interference applied to the front of the sensor. If an obstruction is attached to the front, it will issue a warning through the output of a trouble alarm and the illumination of a trouble indicator light. Once the obstruction or prank is removed, the output will stop, but if a trouble alarm has been triggered, please immediately check the operation of the sensor. ● As a warm-up, the trouble alarm will not be output for about 2 seconds after power is turned on. ● Transparent sprays or items with low reflectivity in the near-infrared range may not be detected. ■Wide Base Design ● By widening the base (Φ150mm) compared to conventional designs, the issue of noticeable dirt marks on the ceiling surface during sensor replacement has been resolved. ■Auto Reset Memory Function When multiple sensors are connected, it is possible to confirm which sensor triggered the alarm through the flashing and illumination of the memory indicator light (yellow) during the alert. ● The memory indicator light will flash for 3 minutes after the alarm is triggered, then continue to stay lit for 47 minutes before automatically turning off. ● This function can be disabled using the mode selector.

  • Security Sensor Systems
  • Sensors

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Passive Sensor Surface Surveillance Type PA-6820W

Passive Sensor Surface Surveillance Type PA-6820W

A passive sensor with a wider base than before, taking into account the dirt marks at the installation location.

■New Design ●By widening the base part (Φ150mm), the issue of visible dirt marks on the ceiling surface during sensor replacement is resolved. ■Auto Reset Memory Function When multiple sensors are connected, it is possible to confirm which sensor triggered the alarm during the alert state by the blinking and lighting of the memory indicator light (yellow). ●The memory indicator light blinks for 3 minutes after the alarm, then continues to light for 47 minutes before automatically turning off. ●The function can be disabled using the mode selector. ■Improved Installation and Maintenance The snap-in method for attaching and detaching the sensor unit and base unit allows for safe and smooth operation at height with a one-touch action. ■Alarm Output Switching Function The alarm output can be switched between contact a or contact b using the mode selector, making system configuration easier. ■User-Friendly Features ●Includes an alarm indicator light that is convenient for operation confirmation. (During alarm: red LED lights up, during memory: yellow LED lights up) ●Attachment: Wall mounting is also possible with BL-5000, BCW-401 (sold separately).

  • Security Sensor Systems
  • Sensors

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Passive Sensor Spot Surveillance Type PA-6805W

Passive Sensor Spot Surveillance Type PA-6805W

A passive sensor with a wider base than before, taking into account the dirt marks at the installation location.

■New Design ● By widening the base part (Φ150mm), the issue of noticeable dirt marks on the ceiling surface during sensor replacement is resolved. ■Auto Reset Memory Function When multiple sensors are connected, it is possible to confirm which sensor triggered the alarm during the alert state by the flashing and lighting of the memory indicator light (yellow). ● The memory indicator light flashes for 3 minutes after the alarm, then continues to stay lit for 47 minutes before automatically turning off. ● This function can be disabled using the mode selector. ■Switchable Count Function Depending on the installation location, the mode selector allows for optional settings of 1, 2, 3, or 4 counts. ■Improved Installation and Maintenance The snap-in method is adopted for attaching and detaching the sensor unit and base unit, allowing for safe and smooth operation even at high locations with a one-touch action. ■Alarm Output Switching Function The alarm output can be switched between contact a or contact b using the mode selector, making system configuration easier. ■User-Friendly Features ● Equipped with an alarm indicator light for convenient operation confirmation. (During alarm: red LED lights up, during memory: yellow LED lights up)

  • Security Sensor Systems
  • Sensors

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Passive Sensor Round Surveillance Type PA-6810B

Passive Sensor Round Surveillance Type PA-6810B

Basic sensors with energy-saving and compact design!! The black (BL) version is now available for all models.

■Energy-saving Design 1 (Low Current Consumption) Reduces current consumption to about one-third (8mA) compared to our conventional products. Allows the use of smaller power supplies than before, enabling cost reduction. ■Energy-saving Design 2 (Low Voltage) Operating voltage is DC7 to 30V. Wiring material selection and long-distance wiring can be done without worrying much about voltage drop due to wiring resistance. Suitable for renewals as well. ■Black Color Available for All Caution-type Models We have introduced a black version that considers harmony with ceilings in temples, shrines, museums, art galleries, and stores. This allows the sensor to blend into the background and remain inconspicuous (does not compromise aesthetics). Furthermore, the visibility and sensitivity of the LED are equivalent to those of the white version. ■Unique Caution Area Configuration Thanks to our unique optical technology that creates a sharp caution area, effective detection performance is achieved regardless of area settings using a movable mirror. ■Improved Installation and Maintenance The snap-in method for attaching and detaching the sensor unit and base unit allows for one-touch operation, making the work smooth and easy.

  • Security Sensor Systems
  • Sensors

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Passive Sensor Spot Surveillance Type PA-6805B

Passive Sensor Spot Surveillance Type PA-6805B

Basic sensors with energy-saving and compact design!! The black (BL) version is now available for all models.

■Energy-saving Design 1 (Low Current Consumption) Reduces current consumption to about one-third (8mA) compared to our conventional products. Allows for the use of smaller power supplies than before, enabling cost reduction. ■Energy-saving Design 2 (Low Voltage) Operating voltage is DC 7 to 30V. Allows for wire selection and long-distance wiring without much concern for voltage drop due to wiring resistance. Suitable for renovations as well. ■Black Color Available for All Alert Models We have introduced black versions that consider harmony with ceilings in temples, shrines, museums/art galleries, and stores. This allows the sensors to blend into the background and remain inconspicuous (without compromising aesthetics). Furthermore, the visibility and sensitivity of the LEDs are equivalent to those of white models. ■Unique Alert Area Configuration Our unique optical technology creates a sharp alert area, providing effective detection performance regardless of area settings with a movable mirror. ■Improved Installation and Maintenance We have adopted a snap-in method for attaching and detaching the sensor unit and base unit, allowing for one-touch operation and smooth work.

  • Security Sensor Systems
  • Sensors

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Passive Sensor PA-6806B(BL)

Passive Sensor PA-6806B(BL)

Basic sensors with energy-saving and compact design!! Black (BL) version is now available for all models.

■Energy-saving Design 1 (Low Current Consumption) Reduces current consumption to about one-third (8mA) compared to our conventional products. Allows the use of smaller power supplies, leading to cost reductions. ■Energy-saving Design 2 (Low Voltage) Operating voltage is DC 7–30V. Enables selection of wiring materials and long-distance wiring without much concern for voltage drop due to wiring resistance. Also suitable for renovations. ■Black Color Available for All Warning Type Models We have introduced a black version that considers harmony with ceilings in temples, museums, art galleries, and stores. This allows the sensor to blend into the background and remain inconspicuous (does not compromise aesthetics). Furthermore, the visibility and sensitivity of the LED are equivalent to the white models. ■Unique Warning Area Configuration Thanks to our unique optical technology that creates a sharp warning area, effective detection performance is achieved regardless of area settings using a movable mirror. ■Improved Installation and Maintenance We have adopted a snap-in method for attaching and detaching the sensor unit and base unit, allowing for one-touch operation and smooth work.

  • Security Sensor Systems
  • Sensors

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Passive Sensor Surface Surveillance Type - 20m Use PA-6720

Passive Sensor Surface Surveillance Type - 20m Use PA-6720

Standard passive sensor equipped with an auto-reset memory function.

■Auto Reset Memory Function When multiple sensors are connected, you can confirm which sensor triggered the alarm during the alert state by the flashing or lighting of the memory indicator (yellow). ● The memory indicator will flash for 3 minutes after the alarm is triggered, then continue to light continuously for 47 minutes before automatically turning off. ● The function can be disabled using the mode selector. ■Easy Sensitivity Adjustment Function Sensitivity settings can be adjusted in four levels by switching the mode selector. Security can be performed at the optimal sensitivity according to the installation location. ● Adjustment range: 60%・80%・100%・120% ■Device Abnormality Alarm Function In the unlikely event that there is damage or disconnection in the internal circuit or connection part of the sensor, the system will notify you of the abnormality with continuous alarm output and continuous lighting of the alarm indicator. ■Reliable Design Resistant to Radio Wave Interference Effective measures have been taken in the circuit and mechanical design against electrical noise coming from the line and noise transmitted through the air. ■Alarm Output Switching Function The alarm output can be switched between contact a or contact b using the mode selector, making system configuration easier.

  • Security Sensor Systems
  • Sensors

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
High-altitude installation passive sensor, surface surveillance type, PA-8420

High-altitude installation passive sensor, surface surveillance type, PA-8420

Due to its unique high-density alert area, it can be installed in high places such as atriums and lobbies.

■Unique security area that can be installed at high locations This sensor can provide security from high places, which was difficult with conventional sensors. Its unique high-density security area allows for installation at heights of 4m to 8m. The high-density security area, composed of four reflective mirrors, can be used in spaces with high ceilings such as atriums and event spaces, as well as under the eaves of truck yards. ■Can be installed indoors and semi-outdoors With a rainproof structure, it can be installed not only indoors but also in semi-outdoor areas. It enables security in places where near-infrared beam sensors cannot be installed. ■Robust housing case It uses an AES resin housing case, improving impact resistance and weather resistance. The risk of damage is relatively low even in places like gymnasiums where ball games are played. ■Rainproof structure In locations where wind and rain can be severe, such as under building eaves, the excellent weather-resistant packing structure prevents water intrusion. (If exposed wiring is used, please use the included waterproof bushing or conduit for wiring.)

  • Security Sensor Systems
  • Sensors

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Passive Sensor Spot Surveillance Type: Exposed Type PA-750

Passive Sensor Spot Surveillance Type: Exposed Type PA-750

Passive sensors ideal for spot surveillance at entrances, exits, and passageways.

■ Two types: Ceiling-mounted and Ceiling-recessed These sensors are installed on the ceiling surfaces of entrances, corridors, and other areas to detect intruders. We offer two models: ceiling-mounted and ceiling-recessed, featuring an elegant design reminiscent of downlights, ensuring that architectural beauty is not compromised. ■ Intrusion Area Adjustment Function The width of the monitored area can be adjusted with a single touch according to the location being secured. Wide: At a height of 3.5m, the width is 2.8m Narrow: At a height of 3.5m, the width is 1.4m. Additionally, the area angle can be adjusted from 3° to 30° in 10 steps (vertical angle from -10° to +20°). ■ Sensitivity Adjustment Volume The device is factory-set to the appropriate sensitivity, but it includes a built-in "sensitivity adjustment volume" for fine-tuning based on installation conditions.

  • Security Sensor Systems
  • Sensors

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Passive Sensor Spot Surveillance Type: Embedded Type PA-750U

Passive Sensor Spot Surveillance Type: Embedded Type PA-750U

Passive sensors ideal for spot surveillance at entrances, exits, and corridors.

■ Two types: ceiling exposed type and ceiling embedded type These are sensors installed on the ceiling surfaces of entrances and corridors to detect intruders. We have commercialized two models: ceiling exposed type and ceiling embedded type, featuring an elegant design reminiscent of downlights, ensuring that architectural beauty is not compromised. ■ Intrusion area adjustment function The width of the monitored area can be adjusted with a single touch according to the location being monitored. Wide: Width 2.8m at a height of 3.5m Narrow: Width 1.4m at a height of 3.5m Additionally, the area angle can be adjusted up to 30° in 10 steps (vertical angle from -10° to +20°). ■ Sensitivity adjustment volume The device is factory-set to the appropriate sensitivity, but it also includes a "sensitivity adjustment volume" that allows for fine-tuning of sensitivity based on installation conditions.

  • Security Sensor Systems
  • Sensors

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Passive Sensor PA-4820A

Passive Sensor PA-4820A

Passive sensor for wall and corner installation adopting fuzzy theory.

■Adoption of Fuzzy Theory The two outputs from the newly developed dual twin element are separated by the CPU into two pieces of information: the temperature difference and shape difference between the detection object and the background. Using fuzzy theory, it accurately determines whether the detection object is a human or a small animal and outputs an alarm. Even if phenomena that are likely to cause malfunctions, such as small animals (like mice), stray light, drafts, or external noise occur, the dual twin effect ensures that there is almost no impact. ■Abnormal Alarm Function While the sensor is in a standby state, the built-in program allows the sensor itself to monitor the following functions. If an anomaly is detected, it notifies of the abnormality through continuous alarm output and continuous illumination of the alarm indicator light. ●Low Power Voltage Abnormality… The newly developed CPU constantly monitors the power voltage supplied to the sensor. If the power voltage drops below a certain level, an abnormal alarm is triggered. ●Device Abnormality… In the unlikely event that damage or disconnection occurs in the circuit or connection parts inside the sensor, an abnormal alarm will also be triggered. ●Aiming Position Abnormality… After confirming the surveillance area, if the aiming device is forgotten to be returned, an abnormal alarm will be triggered.

  • Security Sensor Systems
  • Sensors

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Outdoor and indoor passive sensor, surface surveillance type, PIR-50N

Outdoor and indoor passive sensor, surface surveillance type, PIR-50N

Wide area, long-distance regions can be monitored with a surveillance type.

Wide-range, long-distance surveillance area The unique surveillance area can monitor a wide range and long distance, with a surface surveillance type capable of a 50m range. ■ Installable outdoors and indoors It can be installed not only outdoors but also indoors. Since it is installed on one side only, it can easily provide surveillance in places where opposing infrared sensors cannot be installed. ■ Sturdy housing case It uses an AES resin housing case, improving impact resistance and weather resistance. There is less concern about deterioration from direct sunlight and wind and rain outdoors, and the standard steel plate long hood reduces the impact of bird droppings. ■ Rainproof structure Even in places exposed to wind and rain, such as under eaves of buildings or on freestanding poles, the excellent weather-resistant packing structure prevents water intrusion. (If installing with exposed wiring, please use the included waterproof bushing or conduit.) ■ Features that assist in operation and inspection after installation ● Equipped with a sighting device A sighting device is included to easily set and adjust the surveillance area. ● C contact output The alarm contacts use long-lasting, silent, non-voltage semiconductor contacts to form the C contacts.

  • Security Sensor Systems
  • Sensors

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Infrared Sensor Near Infrared Type (Reflective) Indoor 1m Use PR-1BU

Infrared Sensor Near Infrared Type (Reflective) Indoor 1m Use PR-1BU

Indoor embedded infrared sensor available in two types: reflector reflection type (for 5m) and direct reflection type (for 1m).

■Adopts two types of reflection methods The infrared beam is reflected by the human body passing through the area, and the infrared beam light entry method detects the light entering the main unit and outputs an alarm. ■Can be installed discreetly and neatly It is compatible with a single switch box, allowing for a neat installation. Additionally, the ultra-thin design with a protrusion of only 7mm during installation enables unobtrusive security. ■Easy to install Thanks to the integrated reflection method of the light-emitting and light-receiving parts, it can be used with wiring only to the main unit. This makes it possible to use the infrared sensor even in locations where wiring cannot be routed due to the building's structure. Furthermore, despite being a recessed type, it has a built-in optical axis adjustment function (±15° horizontally), making post-installation adjustments easy. ■Can detect stationary objects It can detect not only moving objects but also stationary ones, making it suitable for various applications, including security. ■User-friendly design ● Contact switching function that can be set according to the operating system (a contact/b contact) ● Tamper function to prevent vandalism ● Alarm indicator light for operation confirmation (red LED: lights up during alarm) ● Sensitivity adjustment according to the installation location is possible.

  • Security Sensor Systems
  • Sensors

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Infrared Sensor PXB-40TE

Infrared Sensor PXB-40TE

The dual-beam opposing infrared sensor has evolved into a new era! An infrared sensor filled with patented technology creates safety and trust!

■Strong against stray light (Dual modulation method) Our unique dual modulation method and photoelectric conversion circuit [patented technology] enhance the ability to distinguish between stray light (such as sunlight and car headlights), achieving highly reliable outdoor surveillance. ■Strong against harsh environments (Two-stage high-power beam) By adopting a high-power beam with 100 times sensitivity margin and 10 times distance margin, we reduce malfunctions during adverse weather conditions such as fog, snow, and heavy rain. ■Energy-saving design (Low power consumption) Compared to conventional products (PB-TE series), power consumption is reduced by over 40%. It can be supported by a smaller power supply than before. ■Green design (Compliance with RoHS directive) It complies with the environmentally conscious RoHS directive. (Eliminating lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, bisphthalates, butyl benzyl phthalate, dibutyl phthalate, diisobutyl phthalate) ■Structure resistant to insect entry (Insect-proof and drip-proof design) With insect-proof bushings and waterproof structures enveloping the wiring, we achieve dustproof, drip-proof, and insect-proof measures equivalent to IP55. The structure is designed to be less susceptible to insects and water (compared to our conventional products).

  • Security Sensor Systems
  • Sensors

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Infrared sensor, near-infrared beam interruption type, PXB-100F

Infrared sensor, near-infrared beam interruption type, PXB-100F

With evolved performance and workability, connecting safety and trust: 4-stage high-power beam infrared sensor.

■Strong against lightning (Enhanced lightning protection) We have strengthened the surge resistance performance to reduce damage caused by induced lightning. *This does not guarantee protection against failures or malfunctions due to lightning strikes. ■Structure that prevents entry of ants and other pests (Insect and drip-proof design) By using insect-proof bushings and dedicated gaskets that envelop the wires, we achieve high dust, drip, and insect prevention measures (equivalent to IP65). The insect-proof bushing can be cut to match the size of the wire, preventing the entry of insects and water from the wire entry point and protecting the circuit board from corrosion. ■Energy-saving design (Reduced power consumption) We have significantly reduced power consumption (to less than 50% compared to our previous models). This allows for the use of smaller power supplies than before, eliminating the need for thick wiring even over long distances, thereby greatly reducing wiring material costs. ■Strong against ambient light (Dual modulation method) By adopting our unique dual modulation method for infrared beams, we enhance the ability to distinguish between ambient light (such as sunlight and car headlights) and achieve reliable outdoor surveillance. ■Improved pole mounting (Back-to-back mounting) The adoption of a new pole mounting bracket has improved the workability when mounting back-to-back on poles.

  • Security Sensor Systems
  • Sensors

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Infrared sensor, near-infrared beam interruption method, PXB-200F.

Infrared sensor, near-infrared beam interruption method, PXB-200F.

With evolved performance and workability, connecting safety and trust: 4-stage high-power beam infrared sensor.

■Strong against lightning (Enhanced lightning protection) We have strengthened the surge resistance performance to reduce damage from induced lightning. *This does not guarantee protection against failures or malfunctions caused by lightning strikes. ■Structure that prevents entry of ants and other pests (Insect and drip-proof design) By using insect-proof bushings and dedicated gaskets that envelop the electric wires, we achieve high dust, drip, and insect prevention measures (equivalent to IP65). The insect-proof bushing can be cut to match the size of the electric wire, preventing the entry of insects and water from the wire entry point and protecting the circuit board from corrosion. ■Energy-saving design (Reduced power consumption) We have significantly reduced the power consumption (to less than 50% of our conventional models). This allows for the use of smaller power supplies compared to previous models, eliminating the need for thick wiring even for long-distance connections, thus greatly reducing wiring material costs. ■Strong against ambient light (Dual modulation method) By adopting our unique dual modulation method for infrared beams, we enhance the ability to distinguish between ambient light (such as sunlight and car headlights) and achieve reliable outdoor monitoring. ■Improved pole mounting (Back-to-back mounting) The adoption of a new pole mounting bracket has improved the workability when mounting back-to-back on poles. As a result, back-to-back mounting has become easier even at high altitudes.

  • Security Sensor Systems
  • Sensors

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Infrared Sensor [Salt Damage Countermeasure Product] PXB-200HFC

Infrared Sensor [Salt Damage Countermeasure Product] PXB-200HFC

Achieving excellent airtightness with IP65 performance! This infrared sensor is resistant to salt damage and can be used with confidence in harsh environments.

■Strong against ambient light (Dual modulation method) By adopting our unique dual modulation method for infrared beams, we enhance the ability to distinguish between ambient light (such as sunlight and car headlights) and achieve reliable outdoor surveillance. ■Strong against harsh environments (4-stage high-power beam) By employing a 4-stage high-power beam with 100 times sensitivity margin and 10 times distance margin, we reduce false triggers during adverse environmental conditions such as fog, snow, and heavy rain. ■Energy-efficient design We have significantly reduced power consumption (to less than 50% of our previous models). This allows for the use of a smaller power supply compared to conventional models, eliminating the need for thick wiring even over long distances, thereby greatly reducing wiring material costs. ■Green design We comply with the RoHS directive, which considers environmental impact. (We eliminate lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, and polybrominated diphenyl ethers.) (RoHS: A directive established by EU member states that restricts the use of specific hazardous substances in electrical and electronic equipment.) ■Dustproof and splash-proof structure (IP65) Through improvements in insect-proof bushings that envelop the electrical wires and dedicated gaskets, we have achieved an IP65 rating (equivalent to IP67).

  • Security Sensor Systems
  • Sensors

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Low power consumption infrared sensor [Salt damage resistant product] PXB-200SWC

Low power consumption infrared sensor [Salt damage resistant product] PXB-200SWC

Outdoor 200m 4-stage high-power beam infrared sensor with low power consumption and wireless capability.

■Solar Power Compatible By supplying power from a separately sold solar power unit, it can be installed and operated in locations without a power supply. This allows for the introduction of infrared sensors at gates in public parking lots without the need for wiring work. ■Strong Against Ambient Light (Dual Modulation Method) By adopting our unique dual modulation method for the infrared beam, we enhance the ability to distinguish between ambient light (such as sunlight and car headlights), achieving highly reliable outdoor security. ■Strong Against Harsh Environments (4-Stage High Power Beam) By employing a 4-stage high power beam with 100 times sensitivity margin and 10 times distance margin, we reduce false activations during adverse weather conditions such as fog, snow, and heavy rain. Expanded Optical Axis Angle Adjustment In addition to ±90° in the horizontal direction, it achieves ±20° in the vertical direction, allowing for flexible installation on slopes. <Reference> Within a height difference of 18m at 50m Within a height difference of 36m at 100m Within a height difference of 72m at 200m Dustproof and Splash-Proof Structure (IP65) By improving the insect-proof bushing that envelops the electric wires and the dedicated packing, we have obtained IP65 (equivalent to IP67).

  • Security Sensor Systems
  • Sensors

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Combination Sensor COM-IN-100AL

Combination Sensor COM-IN-100AL

Intelligent sensor that integrates infrared (4-beam opposing type) and microwave (opposing type).

■High-reliability composite sensor This is a composite sensor that integrates a four-beam infrared sensor and a 24GHz microwave sensor, achieving high reliability even in bad weather conditions. ■Two models: "L" type and "H" type There are two models for the microwave section: "L" type and "H" type. The infrared section can switch between four modulation frequencies via a switch, preventing mutual interference when multiple units are installed in a straight line. ■No need for radio station license application This product falls under the category of "specific low-power radio stations, wireless equipment for mobile detection sensors" permitted by domestic radio law, so no application or procedures for a radio station license are required from the customer. *The first domestic security-oriented opposing microwave sensor. ■Intelligent features ●Four-stage modulation frequency switching This feature is effective when conducting linear surveillance with multiple sensors or during multi-stage alerts. By switching the frequency of the infrared pulse beam, mutual interference can be easily avoided. ●External environment diagnosis function If the infrared light reception amount falls below a certain level due to bad weather (dense fog, heavy snowfall), it will output an environmental deterioration signal.

  • Security Sensor Systems
  • Sensors

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Fence Sensor (for 150m) D7K-150 for 150m

Fence Sensor (for 150m) D7K-150 for 150m

It is a fence sensor that detects intruders from the perimeter fence and conducts security measures.

■Surface surveillance method monitoring the entire fence (net part) By adopting the surface surveillance method, more stringent security is possible. It is also an optimal sensor for dual surveillance when used in conjunction with infrared sensors at critical facilities (such as power plants). ■Not affected by snow, dense fog, frost, etc. This sensor is ideal for installation locations where infrared surveillance is difficult. ■Simple hardware configuration The simple configuration allows for system construction tailored to customer requirements. ■Reduction of construction costs and shortening of construction period By simply securing the sensor cable directly to the fence with zip ties (accessories included), costs are kept down, and the construction period can be shortened.

  • Security Sensor Systems
  • Sensors

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Microwave sensor for outdoor use, 50m, MW-50AH

Microwave sensor for outdoor use, 50m, MW-50AH

Microwave sensors that demonstrate high reliability even in harsh environments.

■ Performance in Adverse Conditions Using 24GHz microwaves, it remains stable even in adverse conditions such as rain, snow, and fog, and is not affected by flying objects like birds or paper scraps. ■ Two Models: "L" Type and "H" Type There are two models with microwave frequencies: "L" type and "H" type, which prevents mutual interference when multiple units are installed in a straight line. ■ No Need for Wireless Station License Application This product falls under the category of "specific low-power radio stations, wireless equipment for mobile detection sensors" permitted by domestic radio law, so no application or procedures for a wireless station license are required from the customer. * The first domestic security-oriented opposing microwave sensor. ■ Built-in Monitor Output Function To facilitate angle adjustments during installation and regular inspections, a monitor output is built-in. By using commercially available testers, angle adjustments can be made easily and reliably. ■ Built-in AGC Circuit It has a built-in AGC circuit that automatically maintains appropriate sensitivity according to the surrounding environment. ■ Built-in Adjustment Mode Function After installation, by switching to adjustment mode during tuning, you can quickly perform operation checks and monitor output voltage verification.

  • Security Sensor Systems
  • Sensors

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Flame Sensor White UV Detection Method FS-3000(W)

Flame Sensor White UV Detection Method FS-3000(W)

It can be widely used not only for fire alarm purposes but also as a warning in non-smoking and no open flames areas.

■ Three power supply options for flexible selection based on usage The power supply can use two AA alkaline batteries, or depending on the application and installation location, a separately sold dedicated AC adapter or lithium battery can also be used. ■ Equipped with external output for system upgrades With an external output terminal, it can emit warning sounds and alarms while simultaneously outputting an alarm signal (open collector output). It can be used for remote monitoring and driving multiple notification devices as part of a disaster prevention system in combination with receivers, etc. (up to DC30V, 50mA) ■ Selectable from two types of voice notifications and one type of alarm sound You can select from two types of voice notifications (no smoking alert, fire hazard alert) and one type of alarm sound using the mode selector. Additionally, the volume of the voice output can be adjusted using the volume control on the back of the unit. ■ Timer-based operation setting function included The alarm operation will only occur if the flame (ultraviolet) continues for longer than the set timer duration. The detection timer can be selected from four levels based on usage conditions: 1 second, 3 seconds, 6 seconds, or 15 seconds. It can be easily set using the mode selector on the back of the unit.

  • Security Sensor Systems
  • Sensors

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Flame Sensor FS-5010A(W)

Flame Sensor FS-5010A(W)

Instantly catch flames 30 meters ahead! A revolutionary UV detection flame sensor that can be installed outdoors.

■Two types of power supply available in the lineup We offer two types of power supplies: DC 10-30V and AC 100V. You can select the model according to your application and installation location. ■Cancel false triggers with 8 levels of sensitivity adjustment To account for all potential sources of false triggers, we have established sensitivity settings with 2 levels (High and Low) and detection timer settings with 4 levels (1 second, 3 seconds, 6 seconds, and 15 seconds) to achieve optimal detection sensitivity for outdoor use. A total of 8 detection conditions allow for settings tailored to the environment. Additionally, you can use the included area mask seal to eliminate unnecessary detection areas. ■Body design that matches any installation location The smart-looking housing-integrated body fits various installation locations. Thanks to our unique ball-lock mechanism, you can easily adjust the detection area after installation. ■Equipped with ultraviolet environment check function The ultraviolet environment at the installation location is monitored by a display light. This allows you to check surrounding ultraviolet sources (causes of false triggers), making it easy to verify during sensitivity settings or when experiencing unstable operation.

  • Security Sensor Systems
  • Sensors

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Sensorsに関連する検索キーワード

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.