Sensors Product List and Ranking from 630 Manufacturers, Suppliers and Companies | IPROS

Last Updated： Aggregation Period:Jan 28, 2026～Feb 24, 2026
This ranking is based on the number of page views on our site.

Sensors Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Jan 28, 2026～Feb 24, 2026
This ranking is based on the number of page views on our site.

  1. WorldLink&Company SkyLink Japan Kyoto//Other construction industries
  2. ビーイーエージャパン Kanagawa//Building materials, supplies and fixtures manufacturers
  3. セキュリティハウス Okayama//Electrical equipment construction business
  4. 4 GRIFFY Tokyo//others
  5. 5 ホトロン Tokyo//Building materials, supplies and fixtures manufacturers
Go to Company Ranking

Sensors Product ranking

Last Updated： Aggregation Period:Jan 28, 2026～Feb 24, 2026
This ranking is based on the number of page views on our site.

  1. Drone/UAV Surveying LiDAR [Case studies available & demonstrations possible] WorldLink&Company SkyLink Japan
  2. Ondroid Temperature and Humidity Measurement System [NETIS Registered] GRIFFY
  3. Rear Confirmation Sensor "Truck Sonar"
  4. 4 3D Laser Sensor for Sheet Shutter "Wide Scan" ビーイーエージャパン
  5. 5 Passive Sensor Surface Surveillance Type for 30m PA-8030 セキュリティハウス

Sensors Product List

2641～2670 item / All 2918 items

Displayed results
Life Safety Sensor - Light Beam Type, Embedded Model SAS-7U

Life Safety Sensor - Light Beam Type, Embedded Model SAS-7U

We adopted a light beam method that is not affected by temperature changes. It detects distances using a new method, capable of sensing heights above 60 cm from the floor.

■Overview ● Used in the Life Safety Notification System. ● Connects to life safety notification devices, and will notify if the sensor does not detect for a set period of time. ■Features ● Since it uses a light beam to measure distance, it does not react to temperature changes such as heating, cooling, sunlight, or drafts. ● If the area changes continuously for more than 30 minutes, such as when items are placed, it automatically adjusts the detection height independently for each beam. ● With a standard ceiling height of 2.5m, it detects up to a height of 1.9m, so it will not detect pets, small animals, or robotic vacuum cleaners. ■Main Specifications ● A total of 7 beams can be adjusted in three levels: 0°, 3°, and 6°. ● The areas at both ends can be set in three patterns: +0.2m/active/inactive. ● The green LED display can be set to either always off or off during detection. ■Installation ● Suitable for individual living spaces in senior housing. ● Available in two types: "exposed type" for easy installation and "embedded type" that matches the installation location.

  • Security Sensor Systems
  • Security devices
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor Surface Surveillance Type PA-6820WA

Passive Sensor Surface Surveillance Type PA-6820WA

Wide-base passive sensor with built-in anti-blind function.

■Anti-Blind Function This function detects interference applied to the front of the sensor. If an obstruction is attached to the front, it will issue a warning through the output of a trouble alarm and the illumination of a trouble indicator light. Once the obstruction or prank is removed, the output will stop, but if a trouble alarm has been triggered, please immediately check the operation of the sensor. ● As a warm-up, the trouble alarm will not be output for approximately 2 seconds after power is turned on. * Transparent sprays or items with low near-infrared reflectivity may not be detected. ■Wide Base Design ● By widening the base (Φ150mm), the issue of noticeable dirt marks on the ceiling surface during sensor replacement is resolved. ■Auto Reset Memory Function When multiple sensors are connected, it is possible to confirm which sensor has triggered an alarm during the alert state by the blinking and illumination of the memory indicator light (yellow). ● The memory indicator light will blink for 3 minutes after the alarm is triggered, then continue to illuminate for 47 minutes before automatically turning off. ● This function can be disabled using the mode selector.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor Spot Surveillance Type PA-6805WA

Passive Sensor Spot Surveillance Type PA-6805WA

Wide-base passive sensor with built-in anti-blind function.

■Anti-Blind Function This function detects interference applied to the front of the sensor. If an obstruction is attached to the front, it will issue a trouble alarm output and illuminate the trouble indicator light as a warning. The output will stop once the obstruction or prank is no longer present, but if a trouble alarm has been triggered, please immediately check the operation of the sensor. ● As a warm-up, the trouble alarm will not be output for about 2 seconds after power is turned on. ● Transparent sprays or materials with low near-infrared reflectivity may not be detectable. ■Wide Base Design ● By widening the base (Φ150mm) compared to conventional designs, the issue of visible dirt marks on the ceiling when replacing the sensor has been resolved. ■Auto Reset Memory Function When multiple sensors are connected, it is possible to confirm which sensor triggered the alarm during monitoring by the flashing and illumination of the memory indicator light (yellow). ● The memory indicator light will flash for 3 minutes after the alarm is triggered, then continue to illuminate for 47 minutes before automatically turning off. ● This function can be disabled via the mode selector.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor Round Surveillance Type PA-6810W

Passive Sensor Round Surveillance Type PA-6810W

A passive sensor with a wider base than before, taking into account the dirt marks at the installation location.

■New Design ● By widening the base (Φ150mm), the issue of visible dirt marks on the ceiling surface during sensor replacement is resolved. ■Auto Reset Memory Function When multiple sensors are connected, it is possible to confirm which sensor triggered the alarm through the memory indicator light (yellow) flashing or lighting up during the alert state. ● The memory indicator light will flash for 3 minutes after the alarm and then remain continuously lit for 47 minutes before automatically turning off. ● This function can be disabled using the mode selector. ■Switchable Count Function Depending on the installation location, the mode selector allows for optional settings of 1, 2, 3, or 4 counts. ■Improved Installation and Maintenance The snap-in method for attaching and detaching the sensor unit and base unit allows for safe and smooth operation even at high locations with a one-touch action. ■Alarm Output Switching Function The alarm output can be switched between contact a or contact b using the mode selector, making system configuration easier. ■User-Friendly Features ● Equipped with an alarm indicator light for convenient operation confirmation. (During alarm: red LED lights up, during memory: yellow LED lights up)

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor PA-6810B(BL)

Passive Sensor PA-6810B(BL)

Basic sensors with energy-saving and compact design!! Black (BL) version is now available for all models.

■Energy-saving Design 1 (Low Current Consumption) Reduces current consumption to about one-third (8mA) compared to our conventional products. Allows the use of smaller power supplies than before, enabling cost reduction. ■Energy-saving Design 2 (Low Voltage) Operating voltage is DC 7-30V. Allows for wire selection and long-distance wiring without much concern for voltage drop due to wiring resistance. Suitable for renovations as well. ■Black Color Available for All Alert Models We have introduced a black version that considers harmony with ceilings in temples, museums/art galleries, stores, etc. This allows the sensor to blend into the background and not stand out (does not compromise aesthetics). Furthermore, the visibility and sensitivity of the LED are equivalent to that of the white version. ■Unique Alert Area Configuration Thanks to our unique optical technology that creates a sharp alert area, effective detection performance is achieved regardless of area settings, using a movable mirror. ■Improved Installation and Maintenance The snap-in method for attaching and detaching the sensor unit and base unit allows for one-touch operation, making the work smooth and easy.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor PA-6805B(BL)

Passive Sensor PA-6805B(BL)

Basic sensors with energy-saving and compact design!! Black (BL) specifications are now available for all models.

Energy-saving Design 1 (Low Current Consumption) Reduces current consumption to about one-third (8mA) compared to our conventional products. Allows the use of smaller power supplies than before, enabling cost reduction. Energy-saving Design 2 (Low Voltage) Operating voltage is DC 7-30V. Allows for wire selection and long-distance wiring without much concern for voltage drop due to wiring resistance. Suitable for renovations as well. Black Color Available for All Alert Models We have introduced a black version that considers harmony with ceilings in temples, museums, art galleries, and stores. This allows the sensor to blend into the background and remain inconspicuous (without compromising aesthetics). Additionally, the visibility and sensitivity of the LED are equivalent to the white models. Unique Alert Area Configuration Thanks to our unique optical technology that creates a sharp alert area, effective detection performance is achieved regardless of area settings, using a movable mirror. Improved Installation and Maintenance The snap-in method for attaching and detaching the sensor unit and base unit allows for one-touch operation, making the work smooth and easy.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor Surface Surveillance Type PA-6820B

Passive Sensor Surface Surveillance Type PA-6820B

Basic sensors with energy-saving and compact design!! The black (BL) version is now available for all models.

■Energy-saving Design 1 (Low Current Consumption) Reduces current consumption to about one-third (8mA) compared to our conventional products. Allows the use of smaller power supplies, leading to cost reductions. ■Energy-saving Design 2 (Low Voltage) Operating voltage is DC 7 to 30V. Enables selection of wiring materials and long-distance wiring without much concern for voltage drop due to wiring resistance. Suitable for renovations as well. ■Black Color Available for All Alert Models We have introduced a black version that considers harmony with the ceilings of temples, museums/art galleries, stores, etc. This allows the sensor to blend into the background and remain inconspicuous (does not compromise aesthetics). Additionally, the visibility and sensitivity of the LED are equivalent to the white version. ■Unique Alert Area Configuration Our unique optical technology creates a sharp alert area, providing effective detection performance with a movable mirror, regardless of area settings. ■Improved Installation and Maintenance We have adopted a snap-in method for attaching and detaching the sensor unit and base unit, allowing for one-touch operation and smooth work.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor PA-6820B(BL)

Passive Sensor PA-6820B(BL)

Basic sensors with energy-saving and compact design!! Black (BL) specifications are now available for all models.

■Energy-saving Design 1 (Low Current Consumption) Reduces current consumption to about one-third (8mA) compared to our conventional products. Allows the use of smaller power supplies, leading to cost reductions. ■Energy-saving Design 2 (Low Voltage) Operating voltage is DC 7-30V. Enables the selection of wiring materials and long-distance wiring without much concern for voltage drop due to wiring resistance. Also suitable for renovations. ■Black Color Available for All Alert Models We have introduced a black version that considers harmony with ceilings in temples, shrines, museums/art galleries, and stores. This allows the sensor to blend into the background and remain inconspicuous (does not compromise aesthetics). Furthermore, the visibility and sensitivity of the LED are equivalent to the white models. ■Unique Alert Area Configuration Thanks to our unique optical technology that creates a sharp alert area, effective detection performance is achieved regardless of area settings, using a movable mirror. ■Improved Installation and Maintenance We have adopted a snap-in method for attaching and detaching the sensor unit and base unit, allowing for one-touch operation and smooth workflow.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor Spot Surveillance Type PA-6806B

Passive Sensor Spot Surveillance Type PA-6806B

Energy-saving and compact design. The three-dimensional alert type also comes in black! A basic passive sensor with a single mirror type.

■Energy-saving Design 1 (Low Current Consumption) Reduces current consumption to about one-third (8mA) compared to our conventional products. Allows the use of smaller power supplies than before, enabling cost reduction. ■Energy-saving Design 2 (Low Voltage) Operating voltage is DC 7 to 30V. Allows for wire selection and long-distance wiring without much concern for voltage drop due to wiring resistance. Suitable for renewals as well. ■Black Color Available for All Alert Models We have introduced a black version that considers harmony with ceilings in temples, museums, art galleries, and stores. This allows the sensor to blend into the background and remain inconspicuous (does not compromise aesthetics). The visibility and sensitivity of the LED are equivalent to the white version. ■Unique Alert Area Configuration Thanks to our unique optical technology that creates a sharp alert area, effective detection performance is achieved regardless of area settings using a movable mirror. ■Improved Installation and Maintenance We have adopted a snap-in method for attaching and detaching the sensor unit and base unit, allowing for one-touch operation and smooth work.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor Surface Surveillance Type for 45m PA-5045F

Passive Sensor Surface Surveillance Type for 45m PA-5045F

Wide-area surveillance passive sensor that controls various functions with a CPU.

■Dual Twin Element + CPU The CPU intelligently controls detection functions, alarm memory functions, and more. ■Ideal for Use in Harsh Installation Conditions Even in the presence of phenomena that are likely to cause malfunctions, such as small animals (mice, dogs, cats, etc.), stray light, drafts, and external noise, the dual twin effect minimizes the impact. ■ASC (Automatic Sensitivity Adjustment) Circuit Equipped with an ASC circuit that automatically sets the appropriate sensitivity based on the balance between room temperature and the body temperature of intruders. No sensitivity adjustments are needed for each season. ■Reliable Design Resistant to Radio Interference By adopting a unique N.E. method (Noise Eliminator) in circuit and mechanical design, effective measures against electrical noise entering from the line and noise propagating through the air are implemented. ■Easy Area Setting The sensor unit is equipped with an area selector and area setting chart on the back, making it easy to set the surveillance area. ■Trustworthy and User-Friendly Design ● Convenient walk test switch for operation confirmation. ● Aiming area adjustment mechanism that allows visual confirmation of the area. ● Auto-return function that automatically switches from aiming adjustment mode to surveillance mode.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor Surface Surveillance Type for 30m PA-8030

Passive Sensor Surface Surveillance Type for 30m PA-8030

Passive sensors that intelligently control various functions.

■Optimal for use under specific installation conditions Even when phenomena that are likely to cause malfunctions occur, such as small animals (mice, dogs, cats), stray light, drafts, and external noise, the dual twin effect ensures minimal impact. ■SC (Automatic Sensitivity Adjustment) Circuit Equipped with an ASC circuit that automatically sets the appropriate sensitivity based on the balance between room temperature and the intruder's body temperature. ■Reliable design resistant to radio interference By adopting a unique N.E. (Noise Eliminator) in circuit and mechanical design, effective measures against electrical noise entering from the line and noise propagating through the air are implemented. ■Alarm Memory Function By adding control contacts externally to the sensor, the activated sensor can be confirmed by the illumination of the indicator light. ■Alarm Indicator Light Control By adding control contacts externally to the sensor, the ON/OFF of the indicator light can be operated remotely. *It can also be controlled by a switch inside the sensor. ■Trustworthy and user-friendly design ● Low power consumption of 15mA when using DC12V. ● Equipped with an aiming area adjustment function that allows visual confirmation of the area.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor Long Area PA-9340

Passive Sensor Long Area PA-9340

Slim and compact wall-mounted passive sensor

■Slim and Compact This sensor is slim and compact, making it unobtrusive even when mounted on walls or pillars. ■Wide Variation The alert area comes in two types: wide area and long area, allowing for flexible use as needed. ■Adoption of Twin Elements The thermal element, which is essential to the sensor's functionality, is equipped with a twin type, and its stable performance has already been proven. ■Operation Indicator Light (Red LED) You can check the operating status with the indicator light (red LED). There is also a convenient feature that allows it to be turned off during alert mode. ■Easy Maintenance It is set to the appropriate sensitivity, so no complicated sensitivity adjustments are necessary. Additionally, you can monitor the sensitivity level with a check pin for easy maintenance. ■Tamper Switch It is set to the appropriate sensitivity, so no complicated sensitivity adjustments are necessary. Additionally, you can monitor the sensitivity level with a check pin for easy maintenance.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Outdoor/Indoor Passive Sensor MS-12F-N

Outdoor/Indoor Passive Sensor MS-12F-N

Reduced false alarms through AND detection in two directions: horizontal area and downward area! This enables more stable security outdoors.

■Features This is a passive sensor that detects thermal radiation emitted from the human body and outputs relay contact signals, suitable for both indoor and outdoor use. ■Adoption of 2-direction AND detection for horizontal and downward areas The detection method outputs a detection signal only when both the horizontal area and downward area are detected, reducing false triggers caused by small animals such as dogs and cats, as well as false triggers due to excessive detection areas, enabling more stable security outdoors. ■180° horizontal surveillance area with two sensors in upper and lower positions With two sensors located in the upper and lower positions, it allows for 180° horizontal surveillance. Additionally, the detection method can be selected between AND detection and OR detection for the upper and lower positions. ■Window surveillance possible through area adjustment By adjusting the area with the included area mask sheet, window surveillance is possible. The MS-12F-N can monitor windows on both sides by installing one unit centrally with its two sensors in the upper and lower positions. ■Outdoor installation possible It has a rainproof structure, making it suitable for outdoor installation. It can be mounted on walls and poles, allowing for flexible installation locations. (Separate mounting brackets are required for pole installation.)

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Outdoor/indoor passive sensor, wire detection type, for 30m, PA-30N

Outdoor/indoor passive sensor, wire detection type, for 30m, PA-30N

Outdoor passive sensor with adjustable angles for easy positioning.

■Can be installed outdoors and semi-outdoors It has a rainproof structure, allowing installation not only indoors but also outdoors and semi-outdoors. Moreover, it can be mounted on ceilings, walls, and poles, so it does not limit the installation location. Additionally, the pitch of the mounting base is compatible with commercially available embedded boxes, allowing for a neat installation. ■Fits into exteriors It has a rainproof structure, allowing installation not only indoors but also outdoors and semi-outdoors. Moreover, it can be mounted on ceilings, walls, and poles, so it does not limit the installation location. Additionally, the pitch of the mounting base is compatible with commercially available embedded boxes, allowing for a neat installation. ■Supports simple outdoor security This passive sensor can meet the needs for simple security in locations where near-infrared beam sensors cannot be installed or where the design of the exterior is prioritized. (However, please avoid using it for serious security or surveillance systems.) ■One-touch angle adjustment With a new type of angle adjustment mechanism, the sensor's angle can now be adjusted up and down, left and right with just one touch.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultra-compact infrared sensor Near-infrared type (opposite type) PB-6Sb

Ultra-compact infrared sensor Near-infrared type (opposite type) PB-6Sb

A super small infrared sensor with a miniaturized amplifier section and a freely detachable connection cable.

■Ideal for security at CD and ATM corners, windows, and corridors The PB-6Sa/6Sb is an ultra-compact opposing infrared sensor with a separated amplifier section, and since the exposed part is only the sensor head (diameter 15mm), security for CD and ATM machines can be conducted discreetly. It can also be used for a wide range of applications such as detecting passing objects at windows, corridors, doors, and for integration into HA devices. ■Realization of compact amplifier section The amplifier section has been miniaturized to W:45mm H:94mm D:29mm. Additionally, the volume has been reduced by 40% compared to our conventional products, allowing for flexible installation locations. ■Cuttable connection cables Depending on the installation location, the connection cables for both the transmitter and receiver can be cut to the necessary length, eliminating the need to bundle them near the amplifier section and allowing for tidy wiring. ■User-friendly design ● The sensor head can be easily installed using a one-touch mounting method by simply drilling a 12mm hole and pushing it in. ● It features a built-in sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Infrared Sensor Near-Infrared Type (Direct Reflection Type) Indoor 1m Use PR-1B

Infrared Sensor Near-Infrared Type (Direct Reflection Type) Indoor 1m Use PR-1B

Direct reflection type infrared sensor capable of motion detection.

■Direct Reflection Type Without Reflector Since it adopts a direct reflection method, a reflector is not required. ■Convenient Sensitivity Adjustment Volume It comes with a sensitivity adjustment volume that allows you to adjust the sensitivity according to the installation location. (It is set at the factory to detect a human body at 1 meter.) ■Wide Range of Applications It can accommodate a wide range of applications that require stationary detection. ■Easy Installation As it is a reflection type sensor with integrated light emission and reception parts, installation and wiring can be completed with just the main unit. ■User-Friendly Design ● It has a thin and compact size of 23.5mm in thickness. ● It has terminal connections, making wiring connections easy. ● It can be used as an embedded type by using an embedded plate (BP-5B, BP-5D: sold separately). ● Using L brackets (BL-5: sold separately) further expands its applications. ■Cautions for Using This Sensor Due to its operating principle, this sensor may not detect the following types of objects, so please be cautious: ● Objects with a surface that is glossy and close to a mirror finish. ● Objects with extremely low light reflectivity. 【Examples】 Clothing made of black wool, black glossy suits or scarves, leather products, items with laser coating.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Infrared Sensor PXB-60TE

Infrared Sensor PXB-60TE

The 2-segment beam opposing infrared sensor has evolved into a new era! An infrared sensor packed with patented technology creates safety and trust!

■Strong against stray light (Dual modulation method) Our unique dual modulation method and photoelectric conversion circuit [patented technology] enhance the ability to distinguish between stray light (such as sunlight and car headlights), achieving highly reliable outdoor surveillance. ■Strong against harsh environments (Two-stage high-power beam) By adopting a high-power beam with 100 times sensitivity margin and 10 times distance margin, we reduce malfunctions during adverse weather conditions such as fog, snow, and heavy rain. ■Energy-efficient design (Low current consumption) Compared to conventional products (PB-TE series), current consumption is reduced by over 40%. It can be supported by a smaller power supply than before. ■Green design (Compliance with RoHS directive) It complies with the environmentally conscious RoHS directive. (Eliminates lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, bisphthalates, butyl benzyl phthalate, dibutyl phthalate, and diisobutyl phthalate.) ■Structure resistant to insect intrusion (Insect-proof and drip-proof design) With insect-proof bushings that encase the wires and a waterproof structure, we achieve dustproof, drip-proof, and insect-proof measures equivalent to IP55. The structure is designed to be less susceptible to insects and water (compared to our conventional products).

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Infrared sensor Near-infrared beam interruption type PXB-100HFA

Infrared sensor Near-infrared beam interruption type PXB-100HFA

The highest quality infrared sensor that connects stability and trust, compatible with environments and eco-friendliness. The pole cover that came with the PXB-HF has been removed.

■Dual Modulation Method By adopting our unique dual modulation method for infrared beams, we enhance the distinguishability from ambient light (such as sunlight and car headlights), achieving highly reliable outdoor surveillance. (It is not affected by changes in illumination of up to 50,000 lux.) ■Four-Stage High-Power Beam By employing a four-stage high-power beam with a sensitivity margin of 100 times and a distance margin of 10 times, we reduce false activations during adverse weather conditions such as fog, snow, and heavy rain. ■Wide Pitch By expanding the vertical and horizontal dimensions of the beam compared to conventional models, and in conjunction with the four-stage beam simultaneous blocking method, we significantly reduce false activations caused by birds and fallen leaves. ■Energy-Efficient Design We have significantly reduced power consumption (to less than 50% of our previous models). This allows for the use of a smaller power supply than before, eliminating the need for thick wiring even during long-distance installations, thereby greatly reducing wiring material costs. ■Green Design We comply with the RoHS directive, which considers environmental impact. (We eliminate lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, and polybrominated diphenyl ethers.) *RoHS: A directive established by EU member states that restricts the use of specific hazardous substances in electrical and electronic equipment.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Infrared sensor Near-infrared beam interruption method PXB-200HFA

Infrared sensor Near-infrared beam interruption method PXB-200HFA

The highest quality infrared sensor that connects stability and trust, compatible with environments and eco-friendliness. The pole cover included with the PXB-HF has been removed.

■Dual Modulation Method By adopting our unique dual modulation method for infrared beams, we enhance the distinguishability from stray light (such as sunlight and car headlights), achieving highly reliable outdoor surveillance. (It is not affected by changes in illumination of up to 50,000 lux.) ■Four-Stage High-Power Beam By employing a four-stage high-power beam with 100 times the sensitivity margin and 10 times the distance margin, we reduce malfunctions during adverse environmental conditions such as fog, snow, and heavy rain. ■Wide Pitch By expanding the vertical and horizontal dimensions of the beam compared to conventional models, and in conjunction with the four-stage beam simultaneous blocking method, we significantly reduce malfunctions caused by birds and fallen leaves. ■Energy-Efficient Design We have significantly reduced power consumption. (Less than 50% compared to our conventional models) This allows for the use of smaller power supplies than before, eliminating the need for thick wiring even for long-distance wiring, thereby greatly reducing wiring material costs. ■Green Design We comply with the environmentally conscious RoHS directive. (We eliminate lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, and polybrominated diphenyl ethers.) *RoHS: A directive established by EU member states that restricts the use of specific hazardous substances in electrical and electronic equipment.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Infrared sensor, near-infrared beam interruption type, PXB-50F

Infrared sensor, near-infrared beam interruption type, PXB-50F

With evolved performance and workability, connecting safety and trust: 4-stage high-power beam infrared sensor.

■Strong against lightning (Enhanced lightning protection) To reduce damage from induced lightning, we have strengthened the surge resistance performance. *This does not guarantee protection against failures or malfunctions caused by lightning strikes. ■Structure that prevents entry of ants and other pests (Insect and drip-proof design) By using insect-proof bushings and dedicated gaskets that envelop the wires, we achieve high dust, drip, and insect protection (equivalent to IP65). The insect-proof bushing can be cut to fit the size of the wire, preventing the entry of insects and water from the wire entry point and protecting the circuit board from corrosion. ■Energy-saving design (Reduced power consumption) We have significantly reduced power consumption (to less than 50% compared to our previous models). This allows for the use of smaller power supplies than before, eliminating the need for thick wiring even over long distances, which greatly reduces wiring material costs. ■Strong against ambient light (Dual modulation method) By adopting our unique dual modulation method for the infrared beam, we enhance the ability to distinguish between ambient light (such as sunlight and car headlights) and achieve reliable outdoor monitoring. ■Improved pole mounting (Back-to-back mounting) The adoption of a new pole mounting bracket has improved the workability when mounting back-to-back on poles.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Housing storage type infrared sensor PXB-100HF-KH

Housing storage type infrared sensor PXB-100HF-KH

Evolved high-function PXB series housing storage type

■Housing Storage Type This is a dedicated housing case product, so it can be directly mounted onto the case. *Installing it directly outdoors may cause malfunctions. ■Significantly Reduced Malfunctions (Dual Modulation Method, Wide Pitch) By adopting our unique dual modulation method for the infrared beam, we enhance the distinguishability from stray light (such as sunlight and car headlights), achieving highly reliable outdoor surveillance. (It is not affected by changes in illumination of up to 50,000 lux.) Additionally, by widening the beam pitch compared to the conventional PB-F/HF series, we significantly reduce malfunctions caused by small animals like birds, resulting in even more stable operation. ■Easy-to-See Aiming Mechanism (Double Ring Aiming Mechanism) [Patent] The aiming device employs a double ring to improve visibility during optical axis adjustment. It provides an appropriate view when the eye is close or far from it. ■Strong Against Lightning (Enhanced Lightning Protection) To reduce damage from induced lightning, we have strengthened the surge resistance performance. Compared to the conventional PB-IN-HF series, it has approximately 10 times the surge resistance performance, allowing for safe use. (Compared to our previous models)

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Low power consumption infrared sensor PXB-100SW

Low power consumption infrared sensor PXB-100SW

Low power consumption and capable of wireless operation, 4-stage high-power beam infrared sensor.

■Solar Power Compatible By combining the floodlight with a separately sold solar power unit, it can be used in locations where wiring from both sides is difficult, allowing for single-sided wiring only on the receiver side. Additionally, by adding a solar power unit and a contact input unit on the receiver side, it can support full wireless operation. Therefore, it is possible to maintain surveillance up to 100 meters even in locations where wiring work is challenging. ■Strong Against Lightning (Enhanced Lightning Protection) To reduce damage from induced lightning, surge resistance performance has been strengthened. *This does not guarantee against failures or malfunctions caused by lightning strikes. ■Structure Preventing Insects (Insect and Drip Proof Design) Using insect-proof bushings that envelop the electric wires and dedicated gaskets, it achieves dustproof, drip-proof, and insect-proof measures equivalent to IP65. The insect-proof bushing can be cut to fit the size of the wire, preventing the entry of insects and water from the wire entry point and protecting the circuit board from corrosion. ■Strong Against Ambient Light (Dual Modulation Method) By adopting our unique dual modulation method for the infrared beam, it enhances the ability to distinguish between ambient light (such as sunlight and car headlights), achieving reliable outdoor surveillance.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Combination Sensor COM-50XTH

Combination Sensor COM-50XTH

A composite sensor that integrates infrared (dual beam opposing type) and microwave (opposing type).

Strong against harsh environments (Composite sensor) This composite type integrates a two-stage beam infrared sensor and a 24GHz microwave sensor, reducing malfunctions during adverse weather conditions such as fog, snow, and heavy rain. *The 24GHz microwave sensor complies with the domestic radio law as a "specific low-power radio station, wireless equipment for mobile detection sensors," so no application for a radio station license or any other procedures are required on the customer's side. Strong against lightning (Enhanced lightning protection) Surge resistance has been strengthened to reduce damage caused by induced lightning. *This does not guarantee protection against failures or malfunctions due to lightning strikes. Two models: "L" type and "H" type The microwave section has two frequency types: "L" type and "H" type. Therefore, mutual interference can be prevented when multiple units are installed directly on the line. *The infrared section can switch between four modulation frequencies using the function setting switch.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Combination Sensor for Outdoor Use, 50m - COM-IN-50HFH

Combination Sensor for Outdoor Use, 50m - COM-IN-50HFH

Intelligent sensor that integrates infrared (4-beam opposing type) and microwave (opposing type).

■High-reliability composite sensor This is a composite sensor that integrates a four-beam infrared sensor and a 24GHz microwave sensor, achieving high reliability even in bad weather conditions. ■Two models: "L" type and "H" type The microwave section has two models, "L" type and "H" type, and the infrared section can switch between four modulation frequencies via a switch, preventing mutual interference when multiple units are installed along a straight line. ■No need for wireless station license application This product falls under the category of "specific low-power radio stations, wireless equipment for moving object detection sensors" permitted by domestic radio law, so no application or procedures for a wireless station license are required from the customer. *The first domestic security-oriented opposing microwave sensor ■Intelligent features ●Four-stage modulation frequency switching This feature is effective when conducting linear surveillance with multiple sensors or during multi-stage surveillance. By switching the frequency of the infrared pulse beam, mutual interference can be easily avoided. ●External environment diagnostic function If the infrared light reception amount falls below a certain level due to bad weather (dense fog, heavy snowfall), an environmental deterioration signal will be output.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fence Sensor (for 50m) D7K-50

Fence Sensor (for 50m) D7K-50

It is a fence sensor that detects intruders from the perimeter fence and performs security monitoring.

■Surface surveillance method monitoring the entire fence (net part) By adopting the surface surveillance method, more stringent security is possible. It is also an optimal sensor for dual surveillance when used in conjunction with infrared sensors at important facilities (such as power plants). ■Not affected by snow, dense fog, frost, etc. This sensor is ideal for installation locations where infrared surveillance is difficult. ■Simple hardware configuration The simple configuration allows for system construction tailored to customer requirements. ■Reduction of construction costs and shortening of construction period Since the sensor cables are simply secured to the fence with cable ties (included), it helps to reduce costs and shorten the construction period.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Microwave Sensor MW-100BH

Microwave Sensor MW-100BH

Microwave sensors that demonstrate high reliability even in harsh environments.

■ Performance in Adverse Conditions Using 24GHz microwaves, it remains stable even in adverse conditions such as rain, snow, and fog, and is not affected by flying objects like birds or pieces of paper. ■ Two Models: "L" Type and "H" Type There are two frequency models, "L" type and "H" type, which prevent mutual interference when multiple units are installed along a straight line. ■ No Need for Wireless Station License Application This product falls under the category of "specific low-power radio stations, wireless equipment for mobile detection sensors" permitted by domestic radio laws, so no application or procedures for a wireless station license are required on the customer's side. *The first domestic security-oriented opposing microwave sensor. ■ Built-in Monitor Output Function To facilitate angle adjustment during installation and regular inspections, a monitor output is built-in. By using commercially available testers, angle adjustments can be made easily and reliably. ■ Built-in AGC Circuit It includes a built-in AGC circuit that automatically maintains appropriate sensitivity according to the surrounding environment. ■ Built-in Adjustment Mode Function After installation, switching to adjustment mode allows for quick operation checks and monitoring of output voltage.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Laser Sensor ZD-LS111M

Laser Sensor ZD-LS111M

High responsiveness, reliable detection. Wide-range laser sensing in both horizontal and vertical directions!!

■Wide Sensing Range (Wide Angle 190° Radius 60m) The sensing range is a fan shape with a wide angle of 190° and a radius of 60m. It can sense a wide area with single-sided wiring. (However, the detection range for objects with a reflectivity of 10% is a maximum radius of 30m.) ■Horizontal Detection (Moving Objects, Objects, Crossing) You can set the detection area in the two-dimensional horizontal direction. It allows for flexible responses according to the site conditions, such as avoiding partial planting or designating the roadway as a non-detection area. ■Vertical Detection (Passage) You can establish a passage detection area in the two-dimensional vertical direction, like lowering a curtain. You can also narrow the detection height or differentiate the output based on the position of building openings. ■Compatible with Diverse Monitoring Systems Equipped with 5 contact outputs (8 points for CGI output), it allows for easy event setting for each output using the included dedicated software. It supports various monitoring systems with a single unit. ■For Preset Camera Activation and Event Recording It is possible to extract individual outputs for each detection area. A single sensor can monitor cameras in multiple locations.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Flame Sensor Brown UV Detection Method FS-3100(B)

Flame Sensor Brown UV Detection Method FS-3100(B)

A highly sensitive sensor that catches even small flames. It can not only detect fires but also provide warnings for no smoking and fire hazard areas.

■Instantly catches flames of 7 cm from 10 m away It sensitively detects the ultraviolet rays contained in flames, ensuring that even small flames are caught without fail, and outputs an alarm before a fire occurs. ■Simultaneous output with alarm sound In addition to voice and alarm sounds, external alarms can be output from the alarm output terminal simultaneously. ■Messages tailored to the application You can choose from three types: two types of voice messages and one alarm sound. ●No Smoking Notification: “(Beep) This is a no smoking area. Please refrain from smoking.” ●No Open Flames Notification: “(Beep) Open flames are prohibited here. The use of open flames outside designated areas is strictly prohibited.” ●Alarm Sound: “(Beep beep beep...)” ■Detection sensitivity and detection timer Ultraviolet rays may be emitted from lighting and some electronic devices even indoors or in hallways. The flame sensor detects ultraviolet rays sensitively, allowing for adjustments to the detection operation settings according to the environment and target to ensure stable operation. - Detection sensitivity: The strength of ultraviolet rays required for detection operation can be switched. (2 levels: H and L)

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Intelligent Passive Sensor PA-IN-5625

Intelligent Passive Sensor PA-IN-5625

Improved small animal identification performance with a twin mirror method and double fuzzy processing.

■Twin Mirror Method and Fuzzy Processing Method The sensor is equipped with two sets of optical units and dual twin elements + twin elements (PA-IN-5605 has twin elements ×2). The area composed of this optical unit maintains an optimal positional relationship according to the alert distance, regardless of the set distance, thanks to its unique mechanical design, significantly reducing false alarms caused by small animals. Additionally, our proprietary fuzzy processing calculates detection signals with the CPU to appropriately determine whether the intruder is a person or a small animal. ■Compatible with Ceiling and Wall Installation ● You can choose a model suitable for the installation location. ● It can be installed on either the ceiling or wall (the spot alert type is exclusively for ceiling mounting). There is also a built-in attachment (BU-5600). The alert methods include three types: three-dimensional, surface, and spot types. You can select a model suitable for the installation location. ■Rich Features ● Equipped with an external force alarm function that can quickly detect malicious masking or other interference aimed at the cover. ● Self-diagnosis function to monitor elements and surrounding circuits, as well as equipment anomaly monitoring. ● Tamper function to monitor improper attachment or opening and closing of the cover.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Outdoor/Indoor Passive Sensor PIR-T35N(BL)

Outdoor/Indoor Passive Sensor PIR-T35N(BL)

A passive sensor for outdoor and indoor use that significantly reduces missed reports and malfunctions with its own triple mirror method and signal processing method.

■Triple mirror that forms a unique area Equipped with three sets of optical units in the sensor. This is a new type of passive sensor that features twin-type elements (newly developed) in each unit. The area formed by the three sets of optical units significantly reduces false alarms and malfunctions due to its unique layout design. Additionally, the design resembles an outdoor light and incorporates internal area adjustments (movable mirrors), making it difficult to infer the direction of the area from the exterior, thus enhancing security. ■Reduction of malfunctions caused by small animals By adopting independent detection units for each mirror, signal processing reduces malfunctions caused by small animals such as cats. Furthermore, by using the pet mode (only for three-dimensional detection type), it can also cancel out medium-sized dogs (approximately 50 cm in height), allowing for operation in homes with pets. Moreover, by attaching a bird stopper to the top, it becomes difficult for birds to perch, significantly reducing unexpected malfunctions. ■Compatible with installation heights of 2.0 to 6.0 meters! It can be installed at heights that are difficult for people to reach, preventing acts of vandalism against the sensor.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Sensors

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.