Sensors Product List and Ranking from 627 Manufacturers, Suppliers and Companies | IPROS

Last Updated: Aggregation Period:Jan 28, 2026~Feb 24, 2026
This ranking is based on the number of page views on our site.

Sensors Manufacturer, Suppliers and Company Rankings

Last Updated: Aggregation Period:Jan 28, 2026~Feb 24, 2026
This ranking is based on the number of page views on our site.

  1. WorldLink&Company SkyLink Japan Kyoto//Other construction industries
  2. ビーイーエージャパン Kanagawa//Building materials, supplies and fixtures manufacturers
  3. セキュリティハウス Okayama//Electrical equipment construction business
  4. 4 GRIFFY Tokyo//others
  5. 5 ホトロン Tokyo//Building materials, supplies and fixtures manufacturers

Sensors Product ranking

Last Updated: Aggregation Period:Jan 28, 2026~Feb 24, 2026
This ranking is based on the number of page views on our site.

  1. Drone/UAV Surveying LiDAR [Case studies available & demonstrations possible] WorldLink&Company SkyLink Japan
  2. Ondroid Temperature and Humidity Measurement System [NETIS Registered] GRIFFY
  3. Rear Confirmation Sensor "Truck Sonar"
  4. 4 3D Laser Sensor for Sheet Shutter "Wide Scan" ビーイーエージャパン
  5. 5 Passive Sensor Surface Surveillance Type for 30m PA-8030 セキュリティハウス

Sensors Product List

2341~2370 item / All 2877 items

Displayed results

Outdoor/Indoor Passive Sensor MS-12T-N

Reduced false alarms with dual-direction AND detection in horizontal and downward areas! More stable security is now possible outdoors.

■ Adoption of 2-direction AND detection for horizontal area and downward area The detection method outputs a detection signal only when both the horizontal area and downward area detect something, which reduces false triggers caused by small animals like dogs and cats, as well as false triggers due to excessive detection area extension, enabling more stable security outdoors. ■ Outdoor installation possible It has a rainproof structure, allowing for outdoor installation. It can be mounted on walls and poles, so it does not limit the installation location. (Additional mounting brackets are required for pole installation.) ■ Day/night discrimination function Equipped with a day/night discrimination function that controls output based on surrounding brightness. It can operate only at night. (Adjustable from approximately 10lx to infinity) ■ Sensitivity adjustment volume It has a built-in sensitivity adjustment volume that allows fine-tuning of sensitivity according to the installation environment, application, and operating conditions. The sensitivity for detecting human bodies can be adjusted in the range of approximately 30% to 170%. ■ Convenient features and user-friendly design ● The power supply voltage ranges from 10.5 to 30V (no polarity). ● It has a count switching function that allows for changing the number of sensor counts (1 time/3 times). ● There is a tamper output on the main unit. ● It includes an operation indicator light for convenient operation confirmation (red LED).

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Outdoor/Indoor Passive Sensor 3D Detection Type PA-15W

Outdoor passive sensor with adjustable angles for free positioning.

■Can be installed outdoors and semi-outdoors Due to its rainproof structure, it can be installed not only indoors but also outdoors and semi-outdoors. Moreover, it can be mounted on ceilings, walls, and poles, allowing for flexible installation locations. Additionally, the pitch of the mounting base is compatible with commercially available embedded boxes, enabling a neat installation. ■Fits well with exteriors With a novel design that has never been seen before, it perfectly fits into exterior coordination. Its smart design matches well in various locations, whether indoors or outdoors. ■Supports simple outdoor security This passive sensor can meet the simple security needs in places where near-infrared beam sensors cannot be installed or where the design of the exterior is prioritized. (However, please avoid using it for serious security or surveillance systems.) ■One-touch angle adjustment With a new type of angle adjustment mechanism, the sensor's angle can be adjusted up and down, left and right with just one touch. ■User-friendly design ● Equipped with an operation indicator light for convenient operation confirmation. (Lights up when detecting) ● Flexible installation with three types of options. ● Wide detection area (3D detection type 15m x 15m, linear detection type 30m)

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ultra-compact infrared sensor, near-infrared type, PB-10NS

Ultra-compact infrared sensor of 1-beam type that can be installed in minimal space.

■Ideal for security around CD/ATM corners and windows/corridors This device can be used for various purposes, such as detecting residual individuals near financial institution CD/ATM machines, securing areas around electric shutters, and detecting passing objects near windows, corridors, toilets, and doors, as well as for integration with HA equipment. ■Ultra-compact control box The control box measures W:45mm H:120mm D:29mm, making it ultra-compact. It can be installed in various locations with minimal space. ■Two types in a series: opposing type and reflective type To accommodate various applications, two types have been developed in a series: opposing type (for 10m) and reflective type (for 4m). You can choose the model according to your needs. ■User-friendly design ● Built-in sensitivity adjustment volume allows for optimal sensitivity adjustment based on installation distance. ● Switchable a contact/b contact. ● The sensor head uses a one-touch installation type that can be mounted simply by drilling a hole and pushing it in. ● Both the projector and receiver can have their connecting cables cut to the necessary length, allowing for tidy wiring without the need to bundle them near the amplifier section.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ultra-compact infrared sensor Near-infrared type PB-4RNS

Ultra-compact infrared sensor of 1-beam type that can be installed in minimal space.

■Ideal for security around CD/ATM corners and windows/corridors It can be used for detecting residual individuals near financial institution CD/ATM machines, securing areas around electric shutters, as well as for detecting passing objects near windows, corridors, toilets, and doors, making it suitable for a wide range of applications. ■Ultra-compact control box The control box measures W:45mm H:120mm D:29mm, making it ultra-compact. It can be installed in various locations with minimal space. ■Two types in a series: opposing type and reflective type To accommodate various applications, two types are available in a series: opposing type (for 10m) and reflective type (for 4m). You can choose the model according to your needs. ■User-friendly design ● Built-in sensitivity adjustment volume allows for optimal sensitivity adjustment based on installation distance. ● Switchable a contact/b contact. ● The sensor head uses a one-touch installation type that can be easily attached by drilling a pilot hole and pushing it in. ● Both the projector and receiver can have their connection cables cut to the necessary length, allowing for tidy wiring without the need to bundle them near the amplifier section.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ultra-compact infrared sensor Near-infrared type PB-10TNS

A two-beam type ultra-compact infrared sensor that adopts a scanning method to prevent mutual interference.

■Realization of miniaturization of the control box section Achieved miniaturization of the control box section with dimensions of W: 45mm H: 120mm D: 29mm. It can be installed in various locations with minimal space. ■Series of two models: opposing type and reflective type To accommodate various applications, two models have been developed: the opposing type (for 10m) and the reflective type (for 4m). You can choose the model according to your needs. ■Prevention of mutual interference with scanning two beams The infrared light is scanned, preventing mutual interference of the infrared signals. ■AND/OR detection switching function Equipped with an AND/OR detection switching function, it can also be used as a single beam. Initially, it can be used as a single beam, and if needed, additional sensor heads can be added to use it as a double beam. ■Slim sensor head section with one-touch installation type The sensor head section adopts a one-touch installation type that can be installed simply by drilling a hole and pushing it in. ■User-friendly design ● Comes with a sensitivity adjustment volume that allows the sensor's sensitivity to be adjusted according to the installation distance. ● The connection cables for both the emitting and receiving sections can be freely cut.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ultra-compact infrared sensor Near-infrared type (opposing type) PB-6Sa

A super compact infrared sensor with a miniaturized amplifier section and freely detachable connection cable.

■Ideal for security at CD and ATM corners, windows, and corridors The PB-6Sa/6Sb is an ultra-compact opposing infrared sensor with a separated amplifier section, and since the exposed part is only the sensor head (diameter 15mm), security for CD and ATM machines can be conducted discreetly. It can also be used for a wide range of applications such as detecting passing objects at windows, corridors, doors, and for integration into HA devices. ■Realization of compact amplifier section The amplifier section has been miniaturized to W:45mm H:94mm D:29mm. Additionally, the volume has been reduced by 40% (compared to our conventional products), allowing for flexible installation locations. ■Cuttable connection cables Depending on the installation location, the connection cables for both the transmitter and receiver can be cut to the necessary length, eliminating the need to bundle them near the amplifier section and allowing for neat wiring. ■User-friendly design ● The sensor head can be easily installed using a one-touch mounting method by simply drilling a 12mm hole and pushing it in. ● It features a built-in sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared sensor near-infrared beam interruption type PR-11BE

Outdoor/indoor mountable one-sided wiring reflective infrared sensor.

■ Convenient one-sided wiring It can be used with one-sided wiring, making it suitable for locations where dual-sided wiring is difficult. Since the lighting and receiving parts are integrated into a reflective sensor, the wiring work only involves the sensor body. Additionally, maintenance is hassle-free. ■ Installable both outdoors and indoors The installation location is not limited to outdoors or indoors. It comes with two types of attenuation sheets for adjusting the light axis, one for outdoor use and one for indoor use. Mounting brackets for poles are also included as standard. (Compatible poles: φ38 to φ45mm) ■ Easy light axis adjustment Light axis adjustment can be done at just one location on the sensor. The adjustment is performed using a sighting device, the included attenuation sheet, and the light sensitivity indicator. ■ Excellent disturbance light characteristics By adopting a special filter that efficiently cuts visible light and enhancing the disturbance light compensation circuit, it is unaffected by changes in illumination of up to 50,000 lux. Influences from sunlight, mercury lamps, fluorescent lights, and car headlights do not pose a problem under normal usage conditions. ■ Freely adjustable monitoring direction The lens can be moved horizontally (±90°) and vertically (±10°), allowing for flexible setting of the monitoring direction, which does not limit the installation location and expands its applications.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared Sensor Near-Infrared Beam Blocking Type (Reflective Type) PR-5B

Ideal reflective infrared sensor for close-range surveillance.

■ Ideal for close-range monitoring It outputs an alarm signal when an intruder obstructs the path between the reflective sensor and the mirror. It is perfect for monitoring indoor entrances, hallways, stairs, and for notifying visitors at the front door. ■ Compact slim design The thickness of the sensor body is 23.5mm, making it as compact as a pocket calculator. The color and design have been carefully considered to allow for inconspicuous installation on walls, ensuring it does not create any sense of discomfort. ■ Easy installation This is a reflective sensor with an integrated light emission and reception unit, so wiring work is only needed for the main unit. Additionally, maintenance is simplified. ■ Excellent disturbance light characteristics Thanks to a special filter that efficiently cuts visible light and unique measures against disturbance light, it is hardly affected by external light sources such as sunlight. ■ Reflective mirror can be installed within a 30° range Using a retroreflective mirror allows for a comfortable incidence angle of infrared rays up to 30° (±15°). This means installation locations are not limited, and applications are broadened. ■ User-friendly design ● Can be used with a wide range of voltages. (DC10.5V to 26V)

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared Sensor Near Infrared Type (Reflective) Indoor 5m Use PR-5BU

Indoor embedded infrared sensor available in two types: reflector type (for 5m) and direct reflection type (for 1m).

■Adopts two types of reflection methods It employs an infrared beam interruption method that detects blockage by the human body between the main unit and the reflector, outputting an alarm. ■Can be installed discreetly and neatly It is compatible with a single switch box, allowing for a neat installation. Additionally, the ultra-thin design with a protrusion of only 7mm during installation enables unobtrusive security monitoring. ■Easy to install Thanks to the integrated reflection method that combines the light-emitting and light-receiving parts, it can be used with wiring only to the main unit. This makes it possible to use the infrared sensor even in locations where wiring cannot be routed due to the building's structure. Furthermore, despite being a recessed type, it includes an optical axis adjustment function (±15° horizontally), making post-installation adjustments easy. ■Can detect stationary objects It can detect not only moving objects but also stationary ones, making it suitable for various applications, including security. ■Uses a retroreflective reflector It uses a highly retroreflective reflector, so as long as the incident angle is within 30° (±15°), it reflects in the direction of the sensor's optical axis, allowing for flexible installation locations and expanding its range of applications.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared Sensor Near-Infrared Beam Blocking Type (Reflective Type) PR-10BA

A reflective infrared sensor with one-sided wiring that can vary the detection direction.

■Freely adjustable monitoring direction The sensor body can be adjusted within a range of 180° left and right, allowing you to freely set the monitoring direction. ■Easy operation confirmation and light axis adjustment It is equipped with an operation indicator light (red LED), making it easy to confirm operation. Additionally, the light axis adjustment can be made solely on the sensor side. ■Easy installation As it is a reflective sensor with an integrated light-emitting and light-receiving unit, wiring work is only required for the main unit. This also reduces effort during maintenance. ■Installation angle of the reflector can be up to 30° Using a retroreflective reflector allows for an incident angle of infrared light up to 30° (±15°), providing flexibility. This means installation locations are not limited, and applications can be expanded. ■User-friendly design ● Built-in ambient light compensation circuit. ● Capable of detecting stationary objects. ● Using L-brackets (BL-10 sold separately) further expands its applications. ● For new construction projects, we recommend the embedded type that does not stand out and does not compromise aesthetics. ● The embedded PR-10BAU comes with an embedded box (for 3-gang switch boxes).

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared sensor, near-infrared beam interruption method, PR-10BAU

A reflective infrared sensor with one-sided wiring that can vary the detection direction.

■Easy operation confirmation and optical axis adjustment It is equipped with an operation indicator light (red LED), making it easy to confirm operation. Additionally, the optical axis adjustment can be made solely on the sensor side. ■Easy installation As it is a reflective sensor with an integrated light-emitting and light-receiving part, wiring work is only required for the main unit. This also reduces effort during maintenance. ■Installation angle of the reflector can be up to 30° Using a retroreflective reflector, the incident angle of infrared light can accommodate up to 30° (±15°). This allows for flexible installation locations and expands its applications. ■User-friendly design ● Built-in ambient light compensation circuit. ● Capable of detecting stationary objects. ● Using L-bracket (BL-10 sold separately) further expands its applications. ● For new constructions, we recommend the recessed type, which does not stand out and does not compromise aesthetics. ● The recessed PR-10BAU comes with a mounting box (for 3-gang switch box).

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared sensor near-infrared beam interruption type (opposite type) PB-30SU

Indoor embedded infrared sensor compatible with a single switch box.

■Compatible with single switch boxes It is compatible with commercially available single switch boxes (deep type), allowing for a neat installation with only a 7mm protrusion from the wall due to its slim design, enabling unobtrusive security. Additionally, the molded resin exterior (frame: white / cover: wine red) matches interior decor without compromising aesthetics. ■Light sensitivity adjustment function By attaching the cover to the main unit, it incorporates a light sensitivity adjustment function that automatically increases sensitivity. During installation or inspection, after adjusting the light axis with the cover removed, simply reattaching the cover will automatically enhance sensitivity, providing a more reliable security line. ■AGC circuit It includes an automatic gain control (AGC circuit) that maintains appropriate sensitivity based on the surrounding environment. ■Light power switch The light power can be switched, ensuring optimal sensitivity based on the installation distance. ■Alarm contact switch The alarm output contacts can be switched, making it compatible with any system. 〈a contact (closed during alarm) / b contact (open during alarm)〉

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared Sensor PB-100T

Indoor two-beam infrared sensor with standard white cover.

■Strong against external light interference (Dual modulation method) Our unique dual modulation method and photoelectric conversion circuit [patented technology] enhance the ability to distinguish incoming light from external sources (such as sunlight and car headlights), achieving highly reliable surveillance. ■Beam setting possible in any direction Both the projector and receiver can rotate the internal optical system ±90° horizontally, allowing for arbitrary setting of the surveillance direction. ■User-friendly design Wide adjustment range (horizontal angle ±90°, vertical angle ±10°) ■Detection response time adjustment function The detection response speed can be continuously varied from 0.05 to 0.7 seconds using a volume control. This allows for countermeasures against false alarms based on the specific site conditions. ■Modulation frequency switching function This feature is effective when conducting linear surveillance with multiple infrared sensors or during multi-stage surveillance. By switching the modulation frequency of the pulse beams from the projector and receiver, mutual interference can be avoided. (Switching between modulation frequencies from 1CH to 4CH is possible) ■Two-stage beam simultaneous interruption method By adopting an AND method that does not trigger an alarm unless both upper and lower infrared beams are interrupted simultaneously, the risk of false activation due to momentary interruptions with time delays is reduced.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared sensor near-infrared beam interruption type PXB-50HFA

The highest quality infrared sensor connecting stability and trust, compatible with environments and eco-friendliness. The pole cover that came with the PXB-HF has been removed.

■Dual Modulation Method By adopting our unique dual modulation method for the infrared beam, we enhance the ability to distinguish between ambient light (such as sunlight and car headlights) and achieve highly reliable outdoor surveillance. (It is not affected by changes in illumination of up to 50,000 lux.) ■Four-Stage High-Power Beam By employing a four-stage high-power beam with 100 times sensitivity margin and 10 times distance margin, we reduce the risk of malfunction in adverse weather conditions such as fog, snow, and heavy rain. ■Wide Pitch By expanding the vertical and horizontal dimensions of the beam compared to conventional models, and in conjunction with the four-stage beam simultaneous blocking method, we significantly reduce false alarms caused by birds and fallen leaves. ■Energy-Efficient Design We have significantly reduced the current consumption (to less than 50% compared to our previous models). This allows for the use of a smaller power supply than before, eliminating the need for thick wiring even in long-distance installations, thereby greatly reducing wiring material costs. ■Green Design We comply with the environmentally conscious RoHS directive. (We eliminate lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, and polybrominated diphenyl ethers.) *RoHS: A directive established by EU member states that restricts the use of specific hazardous substances in electrical and electronic equipment.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared sensor, independent detection method for upper and lower sections, PB-IN-100AT

An infrared sensor with an independent detection method for upper and lower sections that demonstrates effectiveness in preventing bypassing.

Adoption of a dual response time system To prevent malfunctions caused by small animals and birds while ensuring reliable detection of intruders, it is possible to individually adjust the response speed for simultaneous four-beam light interruption and individual upper and lower beam light interruption. Simultaneous four-beam light interruption: 35ms to 500ms Individual upper and lower beam light interruption: 100, 200, 300, 500ms Prevent mutual interference and bypassing! Modulation frequency switching function When conducting linear surveillance with multiple infrared sensors or multi-stage surveillance, it is possible to easily avoid mutual interference and bypassing by switching the modulation frequency of the infrared pulse beam. (Switchable from 1CH to 4CH) Automatically set to optimal sensitivity! Auto gain lock function As long as it is within the maximum surveillance distance, the optimal sensitivity margin is automatically set according to the surveillance distance. Confirmation of gain lock is also easily performed with an electronic sound. Notify of environmental deterioration! External environment diagnosis function If the infrared light reception level drops below a certain threshold due to dense fog, heavy rain, snowfall, etc., an environmental deterioration signal will be output separately from the alarm signal.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared Sensor Near Infrared Beam Blocking Method PH-200SE

Outdoor long-range infrared sensor ideal for perimeter security of vast areas.

■External Environment Diagnosis Function By connecting the optional S.E.C circuit board (sold separately) to the receiver, environmental conditions can be checked separately from intrusion detection. If the infrared light reception drops below a certain level due to bad weather, it will notify the receiving unit of the environmental deterioration. ■Malfunction Prevention Circuit A full safety system that mitigates the effects of heat haze, atmospheric fluctuations, temperature changes, and lighting ensures safe operation at all times. ■Powerful Beam Essential for Outdoor Security To accommodate attenuation from external light and adverse weather conditions such as rain, snow, and fog, the distance margin is set to more than ten times the warning distance. ■Easy and Reliable Light Axis Adjustment With the built-in aiming device and the included sensitivity checker, light axis adjustment can be performed easily and reliably. Additionally, there is a monitor jack for checking sensitivity levels with the optional (sold separately) level checker "EL-01." ■Outstanding Durability and Environmental Resistance The double drip-proof structure and stainless steel plate provide exceptional durability and environmental resistance. ■Flexible Security Network Configuration By synchronizing infrared signals, mutual interference is eliminated, allowing for the configuration of a flexible security network.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared sensor Near-infrared beam interruption type PH-600SE

Outdoor long-range infrared sensor ideal for perimeter security of vast areas.

■External Environment Diagnosis Function By connecting the optional S.E.C circuit board (sold separately) to the receiver, environmental conditions can be checked separately from intrusion detection. If the infrared light reception drops below a certain level due to bad weather, it will notify the receiving unit of the environmental deterioration. ■Malfunction Prevention Circuit A full safety system that mitigates the effects of heat haze, atmospheric fluctuations, temperature changes, and lighting ensures safe operation at all times. ■Powerful Beam Essential for Outdoor Security To accommodate attenuation caused by stray light and adverse weather such as rain, snow, and fog, the distance margin is set to more than ten times the warning distance. ■Easy and Reliable Optical Axis Adjustment With the built-in aiming device and the included sensitivity checker, optical axis adjustment can be performed easily and reliably. (The PH-600SE is equipped with a rifle scope to enhance adjustment accuracy.) Additionally, it features a monitor jack that allows sensitivity levels to be checked with the optional (sold separately) level checker "EL-01." ■Outstanding Durability and Environmental Resistance The double drip-proof structure and stainless steel plate provide exceptional durability and environmental resistance. ■Flexible Security Network Configuration By synchronizing the infrared signals, mutual interference is eliminated, allowing for the configuration of a flexible security network.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Housing storage type infrared sensor PXB-50HF-KH

Evolved high-function PXB series housing storage type

■Housing Storage Type This is a dedicated product for housing cases, allowing for direct installation into the case. *Installing it directly outdoors may cause malfunctions. ■Significantly Reduced Malfunctions (Dual Modulation Method, Wide Pitch) By adopting our unique dual modulation method for the infrared beam, we enhance the ability to distinguish between ambient light (such as sunlight and car headlights), achieving reliable outdoor surveillance. (It is not affected by changes in illumination up to 50,000 lux.) Additionally, by widening the beam pitch compared to the conventional PB-F/HF series, we significantly reduce malfunctions caused by small animals like birds, resulting in even more stable operation. ■Easy-to-See Aiming Mechanism (Double Ring Aiming Mechanism) [Patent] The aiming device employs a double ring, improving visibility during optical axis adjustments. It provides appropriate visibility when the eye is brought close or moved away. ■Strong Against Lightning (Enhanced Lightning Protection) To reduce damage from induced lightning, we have strengthened the surge resistance. It has approximately ten times the surge resistance compared to the conventional PB-IN-HF series, allowing for safe use. (Compared to our previous models)

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Combination Sensor COM-50XTL

A composite sensor that integrates infrared (dual beam opposing type) and microwave (opposing type).

■Strong against harsh environments (Composite sensor) The composite type integrates a dual-beam infrared sensor and a 24GHz microwave sensor, reducing malfunctions during adverse weather conditions such as fog, snow, and heavy rain. *The 24GHz microwave sensor complies with the domestic radio law as a "specific low-power radio station, wireless equipment for mobile detection sensors," so no application for a radio station license or any other procedures are required on the customer's side. ■Strong against lightning (Enhanced lightning protection) Surge resistance has been strengthened to reduce damage caused by induced lightning. *This does not guarantee protection against failures or malfunctions due to lightning strikes. ■Two models: "L" type and "H" type The microwave section has two frequency types: "L" type and "H" type. This prevents mutual interference when multiple units are installed directly on the line. *The infrared section can switch between four modulation frequencies using the function setting switch. ■Strong against stray light (Dual modulation method) By adopting our unique dual modulation method in the infrared sensor, we enhance the ability to distinguish between stray light (such as sunlight and car headlights).

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Glass Break Sensor GS-2000

Sharp detection performance! Slim-shaped ultrasonic glass break sensor.

■Features This is an ultrasonic sensor that detects the unique ultrasonic waves generated when plate glass, such as windows, is broken, and outputs an alarm signal. It is designed specifically for unmanned surveillance. ■Reliable Glass Break Detection It sharply picks up the unique ultrasonic waves generated during glass breakage and accurately processes the signals according to frequency and sound pressure, shutting out external noise. ■Environmental Check Function It is equipped with a mode switch and indicator light that make it easy to check the installation environment and confirm operation. ■Easy Installation and Versatile Placement ● The surveillance area can be adjusted with a maximum vertical range of 8m and a maximum horizontal range of 7m, with a wide variable range of 30°, allowing for easy installation on the ceiling. Additionally, it can monitor multiple pieces of plate glass with a single unit, making installation and maintenance easy without compromising aesthetics. ● Being passive, multiple units can be installed in the same space. ● Its slim design allows it to be installed in narrow spaces between windows and curtains or blinds.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Shutter Sensor Magnetic Modulation Type SH-M5

Equipped with an alarm memory function, a magnetic shutter sensor that is not affected by external environmental factors.

■Alarm Memory Function When the sensor is triggered, the memory indicator will blink for 3 minutes and then stay lit for 47 minutes due to the built-in timer, allowing you to easily identify which sensor has been activated even if multiple sensors are connected to the same line. ■Cancellation of External Magnetic Field Influence Equipped with an adjustment function to cancel various external magnetic influences. It reliably detects forced entry and destruction of shutters. ■Completely Unaffected by External Environmental Influences Since it uses magnetic modulation, it is not affected at all by small animals like spiders and moths, dust and dirt, condensation, freezing, or stray light. It can be used safely in cold or hot and humid environments. ■Cuts Out Radio and Electrical Noise Influence Thanks to unique circuit and mechanical design, it has a high level of noise resistance. ■Adoption of Special Magnetic Sheet There is no need to worry about changes in magnetic force over time or detachment from the shutter slat. It uses a special sheet with high magnetic retention, excellent weather resistance, and flexibility to adhere to curved surfaces. ■Installation Adaptable to the Site With the built-in arm, the distance and height between the sensor and the magnetic sheet can be easily adjusted.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Microwave Sensor for Outdoor Use, 50m, MW-50AL

Microwave sensors that demonstrate high reliability even in harsh environments.

■ Performance in Adverse Conditions Using 24GHz microwaves, it remains stable even in adverse conditions such as rain, snow, and fog, and is not affected by flying objects like birds or pieces of paper. ■ Two Models: "L" Type and "H" Type There are two models available, "L" type and "H" type, which help prevent mutual interference when multiple units are installed along a straight line. ■ No Application Process for Radio Station License Required This product falls under the category of "Specified Low Power Radio Station, Wireless Equipment for Mobile Object Detection Sensors" as permitted by domestic radio laws, so no application process for a radio station license is required on the customer's side. *The first domestic security-oriented opposing microwave sensor. ■ Built-in Monitor Output Function To facilitate angle adjustments during installation and regular inspections, a monitor output is built-in. By using commercially available testers, angle adjustments can be made easily and reliably. ■ Built-in AGC Circuit It includes a built-in AGC circuit that automatically maintains appropriate sensitivity according to the surrounding environment. ■ Built-in Adjustment Mode Function After installation, switching to adjustment mode allows for quick operation checks and monitoring of output voltage.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Laser sensor with automatic tracking function ZD-LS111H

High responsiveness, reliable detection. Extensive laser sensing in horizontal and vertical directions!!

■Wide Sensing Range (Wide Angle 190° Radius 60m) The sensing range is a fan shape with a wide angle of 190° and a radius of 60m. It can sense a wide area with single-sided wiring. (However, the detection range for objects with a reflectivity of 10% is a maximum radius of 30m.) ■Horizontal Detection (Moving Objects, Objects, Crossing, Automatic Tracking) You can set the detection area in the two-dimensional horizontal direction. It allows for flexible responses according to the site conditions, such as avoiding partially planted areas or designating the roadway as a non-detection area. ■Vertical Detection (Passage) You can establish a passage detection area in the two-dimensional vertical direction, similar to lowering a curtain. You can narrow the detection height or differentiate the output according to the position of building openings. ■Supports Diverse Monitoring Systems Equipped with 5 contact outputs (8 points for CGI output), it allows for easy event settings for each using the included dedicated software. It supports a variety of monitoring systems with a single unit. ■New Image Monitoring with Automatic Tracking Function A PTZ camera compatible with laser sensors automatically tracks individuals entering the automatic tracking area. Unlike presets, it monitors the behavior of intruders with a single camera without switching screens or cameras.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Flame Sensor White FS-1000(W)

A flame sensor that instantly catches a 7cm flame at a distance of 10m!

■Instant Flame Detection The flame sensor "FS-1000" detects ultraviolet light contained in flames, allowing it to activate the moment a small flame appears and output an alarm before a fire occurs. ■Adoption of Dual Power Supply System The power supply adopts a dual power supply system with an external power source (DC 9V to 30V) and batteries (2 AA alkaline batteries), allowing selection based on application and installation location. ● When using batteries, it has a built-in notification function that alerts you to low battery through a buzzer sound and indicator light to prevent operation from stopping due to battery depletion. ■System Upgrade Capability When a flame is detected, the built-in buzzer sounds, and an external output (NPN open collector output) can be accessed, allowing connection to remote disaster prevention controllers. Additionally, when using an external power supply, it can also be used as a voltage output corresponding to the power input (DC 30V, 50mA or less). <Usage Precautions> ● The batteries included with this product are test batteries, so they may expire before reaching the specified usage time. Please replace the test batteries with new ones as soon as possible.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Flame Sensor Brown FS-1000(B)

A flame sensor that instantly catches a 7cm flame at a distance of 10m!

■Instant Flame Detection The flame sensor "FS-1000" detects ultraviolet light contained in flames, allowing it to activate the moment a small flame appears and output an alarm before a fire occurs. ■Adoption of Dual Power Supply System The power supply adopts a dual power supply system with an external power source (DC 9V to 30V) and batteries (two AA alkaline batteries), allowing selection based on application and installation location. ●When using batteries, it has a built-in notification function that alerts you to low battery through a buzzer sound and indicator light to prevent operation from stopping due to battery depletion. ■System Upgrade Capability When a flame is detected, the built-in buzzer sounds, and an external output (NPN open collector output) can be accessed, allowing connection to remote disaster prevention controllers. Additionally, when using an external power supply, it can also be used as a powered output corresponding to the power input. (DC 30V, 50mA or less) <Usage Precautions> ●The batteries included with this product are test batteries, so they may expire before the specified usage time is reached. Please replace the test batteries with new ones as soon as possible.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Flame Sensor White UV Detection Method FS-3100(W)

A highly sensitive sensor that catches even small flames. It can provide warnings not only for fire detection but also for no smoking and fire hazard areas.

■Instantly catch flames of 7cm from 10m away It sensitively detects the ultraviolet rays contained in the flame, ensuring that even small flames are caught without fail, and issues an alarm before a fire occurs. ■Simultaneous output with alarm sound In addition to voice and alarm sounds, external alarms can be output from the alarm output terminal simultaneously. ■Messages tailored to the application You can choose from three types: two kinds of voice messages and one alarm sound. ● No Smoking Notification: “(Beep) This is a no smoking area. Please refrain from smoking.” ● No Open Flames Notification: “(Beep) Open flames are prohibited here. The use of open flames outside designated areas is strictly prohibited.” ● Alarm Sound: “(Beep beep beep...)” ■Detection sensitivity and detection timer Ultraviolet rays may be emitted from lighting and some electronic devices even indoors or in hallways. The flame sensor detects ultraviolet rays sensitively, allowing for adjustments to the detection operation settings according to the environment and target to ensure stable operation. - Detection sensitivity: The strength of ultraviolet rays required for detection operation can be switched. (2 levels: H and L)

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Flame Sensor FS-5010A(B)

Instantly catch flames 30 meters ahead! A revolutionary UV detection flame sensor that can be installed outdoors.

■Two power types available in the lineup We offer two types of power supplies: DC 10-30V and AC 100V. You can select the model according to your application and installation location. ■Eight levels of sensitivity adjustment to cancel sources of false activation To account for all potential sources of false activation, we have established two levels of sensitivity settings (High and Low) and four levels of detection timer settings (1 second, 3 seconds, 6 seconds, and 15 seconds) to achieve optimal detection sensitivity for outdoor use. A total of eight detection conditions allow for settings tailored to the environment. Additionally, you can use the included area mask seal to eliminate unnecessary detection areas. ■Body design that matches any installation location The smart-looking housing-integrated body fits various installation locations. Thanks to our unique ball-lock mechanism, you can easily adjust the detection area after installation. ■Equipped with ultraviolet environment check function The ultraviolet environment at the installation site is monitored by a display light. This allows you to check surrounding ultraviolet sources (causes of false activation) and makes it easy to verify during sensitivity settings or when experiencing unstable operation.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Flame Sensor (Multilingual Message Type) FS-7000

It is a flame sensor with built-in messages in five languages. It is battery-operated and has a rainproof structure, making it possible to implement arson prevention even in outdoor locations without a power source!

■Can be installed outdoors and is battery-operated ●It can be installed outdoors with a rainproof structure (equivalent to IP33), and can deliver messages and alarm sounds with clearer sound quality than integrated speakers. ●Since it is battery-operated, it can be used in various locations, including places without power. ■Equipped with messages in five languages for no smoking and fire prohibition ●Equipped with messages in five languages: Japanese, English, Chinese, Korean, and Spanish. ●Messages can be selected from "No Smoking Notification" and "Fire Prohibition Notification," and alarm sounds can also be set. ●Adopts a large speaker that delivers messages and alarm sounds with clear sound quality even outdoors. ●Volume can be adjusted for messages (0–95 dB) and alarm sounds (0–90 dB). ●Messages can be rewritten to custom messages (optional). ■Selection of necessary languages and the number of message activations is possible ●It is possible to select only the necessary language from Japanese, English, Chinese, Korean, and Spanish for activation. ●The number of message activations can be selected as either 1 time or 2 times.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Flame and Motion Sensor for Outdoor Use FP-5500

Integrating flame sensors and motion sensors! With AND detection of flames and people, reliable arson monitoring is possible even outdoors!

■ Detection of flames and human bodies is possible with this one device! This outdoor flame sensor integrates a flame sensor that detects ultraviolet rays contained in flames and a passive infrared human presence sensor that detects far-infrared rays (body temperature) emitted from the human body. By using AND detection of "ultraviolet rays (flame)" and "far-infrared rays (human body)," reliable arson monitoring is possible in outdoor environments where various sources of ultraviolet rays exist. ■ Two operating modes can be selected according to the application The operating modes can be set to [AND operation] and [individual operation]. Additionally, it is equipped with two detection outputs (Detection Output 1, Detection Output 2). 【AND Operation】 This mode outputs when both flames and human bodies are detected. After detecting either flames or a human body, it will output if the other is detected within the set AND confirmation time (10 seconds/60 seconds/10 minutes). It will also output if flames are continuously detected for the set time (30 seconds/60 seconds). ● Operating Specifications AND Detection = Output from Detection Output 2 Continuous Flame Detection = Output from Detection Output 1 If flames are detected again within the AND confirmation time after AND detection, Detection Output 1 will also operate.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Twin mirror type passive sensor, three-dimensional surveillance type, PA-6612W

It is a new type of passive sensor that significantly reduces the impact of small animals through a twin mirror system that forms a unique surveillance area.

■Wide Base Design By widening the base (Φ150mm), the issue of noticeable dirt marks on the ceiling surface during sensor replacement is resolved. ■Twin Mirrors that Form a Unique Area This is a new type of passive sensor that incorporates two sets of optical units, each equipped with twin elements. The area formed by the two sets of optical units maintains an optimal positional relationship according to the detection distance, regardless of the set distance, significantly reducing false alarms caused by small animals. ■Micro-Motion Detection Function Equipped with a function that can sensitively detect even slight movements of a person. ■Auto Reset Memory Function When multiple sensors are connected, it is possible to confirm which sensor triggered the alarm through the memory indicator light (yellow) blinking or lighting up during the alarm. ● The memory indicator light blinks for 3 minutes after the alarm, then continues to light up for 47 minutes before automatically turning off. ● This function can be disabled via the mode selector. ■Switchable Count Function Depending on the installation environment, the mode selector allows for optional settings of 1, 2, 3, or 4 counts.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration