Sensors Product List and Ranking from 632 Manufacturers, Suppliers and Companies | IPROS

Last Updated： Aggregation Period:Mar 18, 2026～Apr 14, 2026
This ranking is based on the number of page views on our site.

Sensors Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Mar 18, 2026～Apr 14, 2026
This ranking is based on the number of page views on our site.

  1. ビーイーエージャパン Kanagawa//Building materials, supplies and fixtures manufacturers
  2. セキュリティハウス Okayama//Electrical equipment construction business
  3. 緑測器 東京営業所 Tokyo//others
  4. 4 ホトロン Tokyo//Building materials, supplies and fixtures manufacturers
  5. 5 null/null
Go to Company Ranking

Sensors Product ranking

Last Updated： Aggregation Period:Mar 18, 2026～Apr 14, 2026
This ranking is based on the number of page views on our site.

  1. Ondroid Temperature and Humidity Measurement System [NETIS Registered] GRIFFY
  2. Rear Confirmation Sensor "Truck Sonar"
  3. 3D Laser Sensor for Sheet Shutter "Wide Scan" ビーイーエージャパン
  4. Monitoring sensor that visualizes blood pressure, heart rate, and respiratory rate.
  5. 4 Millimeter-wave radar monitoring sensor "Care Sherpa" テルウェル西日本 　営業部　

Sensors Product List

2221～2250 item / All 2961 items

Displayed results
[Case Study] Demonstration Experiment of Earthquake Monitoring for Nagoya Bridge

[Case Study] Demonstration Experiment of Earthquake Monitoring for Nagoya Bridge

It was trial-introduced for the understanding of complex behavior during large-scale earthquakes and the refinement of response analysis techniques.

This is an introduction to a case where 'sonas x01' was adopted for a demonstration experiment aimed at clarifying the damage mechanisms of infrastructure structures, such as bridges, by measuring their vibrations during earthquakes and translating that knowledge into reinforcement and design methods. In constructing this monitoring system, there were no locations available for a fixed power supply, so it was required that all nodes, including the master unit and nodes for internet connection, be battery-operated, and that they have a data upload function to confirm acceleration data during an earthquake without needing to go on-site. Such requirements, which are considered difficult with general sensor network technology, were achieved with this product without the need for additional special implementations or settings. 【Case Study】 ■ Installation Site: Yokohama National University ■ Challenges Before Installation - Earthquake monitoring was necessary to clarify the damage mechanisms of structures. ■ Reason for Selection - The power-saving capability that enables continuous monitoring outdoors without a power supply was a key point. *For more details, please refer to the PDF document or feel free to contact us.

  • Other measuring instruments
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
"Stable × Synchronization for Wireless Factory" Wireless Technology 'UNISONet'

"Stable × Synchronization for Wireless Factory" Wireless Technology 'UNISONet'

No need for detailed wireless tuning! Just install it in the location you want to measure.

"UNISONet" is Sonas's unique wireless technology that meets the demands of IoT wireless communication in manufacturing environments, such as bidirectional low latency, low power consumption, and stable connectivity. It achieves high-quality sensing comparable to wired solutions wirelessly. There is no need for fine-tuning of the wireless settings; simply install it in the desired measurement location. Additionally, it excels in power efficiency, allowing for long-term measurements over years with dry batteries. 【Features】 ■ Achieves high-quality sensing comparable to wired solutions wirelessly ■ Supports bidirectional communication and can transmit command signals ■ Reduces wiring for signal and power connections ■ Covers large factory premises ■ Enables centralized management of existing equipment and devices scattered over a wide area *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wireless Analog Meter Automatic Reading System Remote Inspection (NETIS Registered)

Wireless Analog Meter Automatic Reading System Remote Inspection (NETIS Registered)

No power supply needed, no installation required, easy setup to reduce inspection work and enable remote inspections!

This service is a system that automatically reads the dials of meters scattered throughout a factory by retrofitting magnetic sensors to existing analog meters, allowing for centralized management and reducing the manual inspection tasks that were previously performed. ■ Compared to camera-based systems… - Not affected by dirt, weather, sunlight, etc., which can impair meter visibility - Easy installation without the need for distance or angle adjustments or mounting fixtures - Long battery life and high measurement frequency - Works at night - Usable even outside LTE coverage ■ Features include: - Operable on cloud or on-premises - Explosion-proof sensor types available - Sensors can operate on battery for over a year - Measurement range of up to 20 km and can connect over 100 sensors through our unique mesh wireless UNISONet ■ Here’s what’s impressive: - Prevents reading and recording errors - Immediate alerts in case of abnormalities - Existing meters can be used as they are - No need for network or power installation ■ How it can be useful: - Labor-saving and automation - Minimizes damage through early detection - Reduces accident risks during high-altitude inspections This system is available for sale, rental, and W rental.

  • Measurement and analysis equipment leasing and rental
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wireless temperature and humidity measurement system for concrete curing management (NETIS)

Wireless temperature and humidity measurement system for concrete curing management (NETIS)

The measurement range is up to 20 km (underground, in tunnels, and high-rise buildings wirelessly) and the maximum number of sensor connections is 100 units. Thermocouples are also supported.

This product is a wireless temperature and humidity measurement system equipped with the unique mesh wireless UNISONet and the standard data logger "Ondotori" from T&D Corporation. It is effective in various locations such as construction sites during concrete curing and painting work, food factories, logistics warehouses, and data centers. ■ Features - Measurement range up to 20 km - Maximum number of sensor connections: 100 units ■ Amazing aspects - Wireless connectivity reaches far and connects easily - No power supply needed at the measurement site; wireless means no complicated wiring work - Just install and turn on the switch, and it automatically starts measuring, recording, and monitoring - Real-time monitoring and various setting changes are possible from a distance ■ Benefits - Reduction in wiring costs - Less manual effort for measurement, recording, and monitoring - Cost savings on power supply installation - Reduction in inspection tasks ■ Possible uses - Automation of measurement tasks - Real-time monitoring from a distance - Automatic measurement, recording, and monitoring This system is available for sale or rental. *For more details, please refer to the PDF document or feel free to contact us.

  • Measurement and analysis equipment leasing and rental
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wireless temperature and humidity measurement system for multi-point measurement in logistics warehouses!

Wireless temperature and humidity measurement system for multi-point measurement in logistics warehouses!

Wireless multi-point measurement in underground and high-rise areas, with over 100 sensor connections.

■Here are the advantages - Wireless connection eliminates the need for complicated wiring work - Simply install and turn on the power to automatically start measuring, recording, and monitoring - Remote monitoring and setting changes are possible ■It is useful in the following situations - Reduces wiring costs - Alleviates the workload of manual measuring, recording, and monitoring - No electrical work required, reducing installation costs - Decreases the frequency of inspection tasks and promotes efficiency ■It is suitable for the following applications Promotes labor-saving in measurement tasks Achieves real-time monitoring from a distance Improves efficiency of automatic data measurement, recording, and monitoring This system is available for sale or rental. *For more details, please refer to the PDF document or feel free to contact us.

  • Other measuring instruments
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
For IoT implementation and visualization! Wireless remote monitoring system (NETIS)

For IoT implementation and visualization! Wireless remote monitoring system (NETIS)

You can remotely manage high-rise buildings with 40 floors or more, as well as underground and in tunnels, wirelessly!

A wireless network that operates with low power consumption enables multi-point synchronized measurements throughout large structures such as high-rise buildings, as well as remote monitoring in underground areas and tunnels. Wiring work and power preparation at measurement locations are unnecessary. Thanks to smartly designed devices and simple installation procedures, total costs can be reduced to less than half compared to wired systems. We provide a remotely operable management system via the cloud, achieving efficient operation. Our wireless network, responsible for communication and time synchronization, utilizes our proprietary LPWA technology "UNISONet." *For more details, please refer to the PDF document or feel free to contact us.*

  • Other measuring instruments
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Dedicated flame sensor with automatic extinguishing function for distribution boards and control panels.

Dedicated flame sensor with automatic extinguishing function for distribution boards and control panels.

This single unit addresses electrical fires in distribution boards and control panels with "early detection" and even "automatic extinguishing"!

The locations where electrical fires occur are said to be in distribution boards and control panels, where wiring is concentrated. Since distribution boards and control panels are responsible for the power and control of buildings and equipment, damage from a fire can require significant time and cost for recovery. Our flame sensor instantly detects flames (ultraviolet light) generated by a fire, and with the use of CO2 extinguishing agents, it enables not only rapid initial extinguishing but also allows for quick recovery due to the complete absence of contamination risk. Safety measures for distribution boards and control panels are often overlooked, so please consider this opportunity. 【Features】 ■ Early detection of flames generated inside the panel through ultraviolet detection ■ Rapid extinguishing possible with CO2 extinguishing agents ■ No risk of contamination from extinguishing agents ■ Can be retrofitted to DIN rails ■ Selection of the number of connected cylinders according to the panel's capacity

  • Security Sensor Systems
  • Fire alarm device
  • Power distribution and control panels
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Organic film sensor for predictive maintenance

Organic film sensor for predictive maintenance

Higher sensitivity! Reduced noise interference enables highly sensitive detection.

We would like to introduce our "Organic Film Sensor" for predictive maintenance. This is a resonant-type sensor using organic semiconductors, with over six times the sensitivity of general-purpose sensors. It features customized designs tailored to failure modes such as unbalance and misalignment. No wiring is required, and it has a built-in battery. Data can be obtained via wireless communication. 【Features】 ■ Enables easy predictive maintenance ■ Early detection of targeted failure modes ■ Simply stick it to existing equipment *For more details, please refer to the PDF document or feel free to contact us.

  • Analysis and prediction system
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Sensor "e-Den no Suke-kun"

Sensor "e-Den no Suke-kun"

A bed exit sensor and wake-up sensor that surpasses sensor mats, designed for the caregiving and medical field.

This is a bed exit sensor that reliably recognizes "waking up and getting out of bed" by analyzing images captured through a "vehicle-mounted regular external camera + LED light" using "advanced image processing technology," minimizing false alarms, missed reports, and bypasses. 【Features】 ■ Simply plug it into a power outlet, and it will automatically start within about a minute, beginning monitoring. No need for a PC or other software or apps. As a stand-alone type, it can be easily moved and installed in any room. ■ Notifications can be sent to nurse call systems (wireless/wired, existing/new) and can also be handled wirelessly (no installation required) in small facilities without nurse call systems. ■ Automatically detects the bed. It continues to track automatically even after the bed is moved. ■ Camera tracking at 10 frames per second allows for the detection of relatively quick movements by users. ■ It does not react to rolling over in bed and does not recognize third parties. ■ The infrared camera + LED light enables detection even in complete darkness. ■ Being non-contact, it is hygienic and has a long lifespan. There are no tripping hazards, disconnections, dirt, or removal by users as seen with sensor mats. *For more details, please download the PDF or feel free to contact us.

  • Security Sensor Systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
New non-contact vital sensing sensor

New non-contact vital sensing sensor

NHA noise reduction technology and fluctuation analysis technology that visualize the state of the mind!

Our company is developing a "New Non-Contact Vital Sensing Sensor" that can detect pulse and visualize mental information without contact. We have adopted new technologies such as "NHA Noise Reduction Technology" and "Fluctuation Analysis Technology." It is expected to be utilized in work style reform systems (mental care) and training healthcare. 【Features】 ■ Non-contact: Measures pulse and body movement breathing without touching the body ■ Penetrates obstacles: Can detect through walls, glass, clothing, and bedding ■ Visualization of mind and body: Visualizes mental information as an added function *For more details, please download the PDF or feel free to contact us.

  • others
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Non-contact hover sensor

Non-contact hover sensor

Achieve non-contact touch panel retrofitting! Ideal for places where infection control and hygiene management are required.

The "Non-contact Hover Sensor" is a transparent glass sensor that easily enables touch-free (air touch) operation by simply plugging in a USB cable to an existing system. In places where many people touch, as well as in medical facilities and food factories with strict hygiene management, it eliminates anxiety by allowing operation without direct contact, providing a safe, secure, and clean environment. It also contributes to infection control, dirt prevention, and reduced cleaning frequency. 【Features】 ■ Detects fingers at a distance of about 5 cm from the sensor surface ■ Operation is possible even while wearing gloves ■ Intuitive operation similar to a touch panel with a uniquely developed algorithm ■ Detection height can be adjusted according to application and usage environment ■ Easy connection by simply plugging in a USB cable without the need for dedicated driver installation *For more details, please refer to the PDF document or feel free to contact us.

  • Payments, cards, and electronic money
  • Vending machines
  • Cash registers and vending machines
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[NETIS Registration] Ultra-thin sensor for concrete filling and compaction management

[NETIS Registration] Ultra-thin sensor for concrete filling and compaction management

Don't overlook insufficient concrete filling and compaction! A sheet-type sensor (Juuten Mieruka) that visualizes the concrete filling condition and compaction level.

【NETIS Registration Number TH-180010-VE】 Juuten MierukaⓇ can accurately determine the filling conditions in areas that are not visually accessible during concrete placement, as well as in areas prone to air pockets. Additionally, by adding a management function for compaction levels, it contributes to improving the quality of concrete construction! 【Features】 ■ Achieves an ultra-thin thickness of 0.6mm, with almost no concrete cross-section loss ■ Capable of detecting filling over a wide area and estimating compaction levels, improving monitoring accuracy ■ Significantly reduces labor for installation work ■ Usable for underwater concrete placement in seawater and freshwater, in addition to grout and mortar! - Sensors can be customized for measurement channels and sensor lengths. - Sheet-type sensors can manage multiple (up to 3) sensors installed in different directions and locations with one recorder using a hub. (The maximum number of detections is up to 11.) - Miniaturized pinpoint sensors can also be managed collectively with up to 11 units using one data recorder. - By using the optional Mieruka Online, the recorder can be connected to Wi-Fi, allowing for real-time online ICT management of filling conditions and compaction levels.

  • システム構成.JPG
  • IPROS01774528239091585514.jpeg
  • Tunnel construction
  • Foundation construction
  • Bridge Construction
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Improvement of safety and efficiency: Pressure measurement methods for maintenance and repair work, such as bridge bearing replacement.

Improvement of safety and efficiency: Pressure measurement methods for maintenance and repair work, such as bridge bearing replacement.

NETIS registration number TH-220004-A Efficient management of jack pressure and hydraulic/hydraulic pressure measurement values in bridge bearing replacement without manual labor × centralized management!

The "Ekiatsumieruka LPMS100" is a monitoring system that stores data on water pressure and oil pressure measured by pressure gauges in the cloud, allowing for management and viewing via a browser. It can manage measurement data from up to 50 pressure gauges collectively, and the management screen displays pressure values color-coded for easy identification of abnormalities at a glance. Since the pressure gauge is battery-operated, it can be used in locations without a power supply. It contributes to reducing the burden of safety management, such as measuring jack pressure during bridge bearing replacements. 【Case Study】 Previously, measurements were confirmed visually in an analog manner, which was time-consuming. There were also incidents involving workers due to environmental conditions and bad weather. However, by using this device, data can now be quickly and safely obtained without having to enter the installation site. It is available for rental starting from one week, allowing for use according to the required duration. *For more details, please refer to the materials available for download in PDF format. Feel free to contact us with any inquiries.

  • s1.jpg
  • Other measuring instruments
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Liquid Level Gauge "Metritape"

Liquid Level Gauge "Metritape"

Achieving high durability and flexibility! A proven system backed by 50 years of experience.

"Metritape" is a liquid level gauge for fuel tanks, ballast tanks, draft measurements, and service tanks. The Metritape sensor employs innovative resistive tape technology, achieving high durability and flexibility. It has high reliability, demonstrating stable performance even in hazardous locations such as inside fuel tanks. Additionally, we offer a "silver ion drinking water sterilization device" that features easy electrode replacement and a lightweight, compact design. 【Features】 ■ No work required inside the tank ■ No movable parts that can stick, break, or corrode ■ High reproducibility and reliability of output signals ■ Highly flexible sensor that can be installed in J-type tanks ■ Sensor lengths available from 1m to 36m *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Snowfall sensor with ondulation feature

Snowfall sensor with ondulation feature

The heater operates by detecting snowfall based on the outside temperature and moisture levels! It demonstrates snow melting effects in various locations.

The "snowfall sensor with ondire function" is a product that automatically turns on the heater and performs snow melting operations when it detects snowfall by installing a snowfall sensor on an infrared heater. By attaching a ground temperature sensor (sold separately), it is also possible to perform freeze prevention operations and preheating operations, demonstrating snow melting effects in various locations. It also serves as an outdoor heating heater. The heater operates only when continuous moisture is detected within a certain time frame. If there is a small amount of snow that does not require snow melting, the heater will not be activated. 【Features】 ■ Determines snowfall by detecting outdoor temperature and moisture, and activates the heater ■ The heater operates only when continuous moisture is detected within a certain time frame ■ The heater will not operate for a small amount of snow that does not require snow melting ■ Avoids malfunction caused by snow blown from trees or power lines ■ The time from snowfall detection to heater activation can be set *For more details, please refer to the PDF document or feel free to contact us.

  • Snow melting equipment
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Lead pin terminal "PRP-1714・PRP-1722"

Lead pin terminal "PRP-1714・PRP-1722"

Introduction of cadmium brass connection terminals used in the pipe earth method!

"PRP-1714 and PRP-1722" are cadmium-free brass connection terminals used in pipe grounding methods. Once the guard pipe grounding rod has been driven in, fill the interior of the guard pipe and the gap between the guard pipe and the soil with a reducing material, and then drive in this product. Connect the lead terminal to the grounding wire of the lightning protection object to complete the work. 【Features】 <Size> ■PRP-1714: 14sq × 250mm ■PRP-1722: 22sq × 500mm *For more details, please refer to the PDF document or feel free to contact us.

  • Ground foundation construction method
  • Pile and foundation work
  • Joints between components
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Customizable for sensors and more! Piezo film sensor.

Customizable for sensors and more! Piezo film sensor.

It is a flexible structure with a soft film piezoelectric material! We provide flexible support for finished products such as accelerometers, pressure sensors, and hydrophones!

We handle "piezo film sensors" that can be used for monitoring biological signals such as body movement, as well as monitoring vibrations, shocks, dynamic strain, and dynamic loads. Our company has successfully developed piezo film sensors into products such as "hydrophones," "ultrasonic probes," "accelerometers," "acoustic pickups," and "pressure sensors." Our expertise, gained from years of working with piezo film, allows us to excel in sensorization of complex shapes and circuit design tailored to the sensors. Our piezo film sensors have a proven track record! They are used in a wide variety of applications, including medical device manufacturers, construction machinery, and automotive manufacturers. They are suitable for monitoring biological signals such as body movement, as well as monitoring vibrations, shocks, dynamic strain, and dynamic loads. 【Features】 - The electrode part without lamination is coated with a thin coating material, except for the terminal part. - PET film with adhesive, 125μm, is laminated on one side or both sides. - Piezo film (PVDF) is used for the piezoelectric element. *For more details, please download the PDF or feel free to contact us.

  • Other measuring instruments
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Piezo film sensor "MP series"

Piezo film sensor "MP series"

A type of piezo film sensor designed for simple use in research applications and similar purposes.

The "MP series" is a very small product among piezo film sensors. It is suitable for monitoring biological signals such as body movements, as well as monitoring vibrations, impacts, dynamic strain, and dynamic loads. 【Features】 ■ Shielded structure ■ Designed for easy use in research applications ■ Extremely small size ■ Uses piezo film (PVDF) as the piezoelectric element *For more details, please refer to the PDF materials or feel free to contact us.

  • Other measuring instruments
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Piezo film sensor "SP series"

Piezo film sensor "SP series"

High sensitivity with low noise! Flexible structure with shielded design and flexible film piezoelectric material.

The "SP series" is a low-noise, high-sensitivity piezo film sensor. It generates voltage in response to minute changes such as compression and elongation (strain). It is suitable for monitoring biological signals such as body movements, as well as vibrations, impacts, dynamic strain, and dynamic load monitoring. 【Features】 ■ Shielded structure ■ Flexible with a soft film piezoelectric material ■ Low noise and high sensitivity ■ Uses piezo film (PVDF) as the piezoelectric element ■ Laminated with adhesive PET film of 125μm on one side ■ The electrode part without lamination is coated with a thin coating material, except for the terminal part *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
※Technical information update! Piezo film sensor ALL series

※Technical information update! Piezo film sensor ALL series

Ideal for monitoring dynamic loads! Piezo film sensors that generate voltage in response to minute changes.

We would like to introduce our "Piezo Film Sensor." This sensor uses piezo film in its piezoelectric element to generate voltage in response to small changes such as compression and elongation. It is suitable for monitoring biological signals such as body movements and dynamic loads. Additionally, we offer a variety of models including the general-purpose "TP series" with lead wires, the shielded "SP series," the wide detection area "LP series," and the ultra-small "MP series." 【Features】 ■ Compliant with RoHS Directive ■ Generates voltage in response to small changes such as compression and elongation (strain) ■ Uses piezo film (PVDF) in the piezoelectric element *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Understanding the case! We are offering "What can be done with piezo film? Acceleration Edition"!

Understanding the case! We are offering "What can be done with piezo film? Acceleration Edition"!

Can be molded into free shapes! What can piezoelectric materials like piezo films be used for? Dr. Piezo will introduce some examples.

Regarding the "Piezo Film" handled by Elmech Electronic Industry Co., Ltd., we introduced the characteristic of "piezoelectricity" in the basic edition. In this sequel, we will clearly present examples of "what it can actually be used for." Please feel free to download and take a look. [Contents] ■ What can be done with piezo film? ■ What can be achieved by detecting acceleration? ■ Prototype examples of piezo film sensors (with photos)

  • Bridge Materials
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Heat expansion absorption flex for station use

Heat expansion absorption flex for station use

Can be used under high temperature and high pressure conditions.

This is a flexible component designed for thermal expansion absorption and vibration damping in exhaust systems such as those found in engine compartments. - Achieves both flexibility and airtightness through bellows - Compatible with a wide range of connection shapes and diameters - Wire mesh ring (optional) to enhance vibration damping function - Can be used under high temperature and high pressure conditions *Please feel free to contact us for more details.

  • Piping materials (copper pipes, cast iron pipes)
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Features of the NSC7055S type construction management device.

Features of the NSC7055S type construction management device.

Automatically calculate the amount of mortar for one unit! Introducing the features of the data recording device NSC7055S model.

Our company handles the data recording device for construction associated with columnar improvement and steel pipe pile driving, the 'NSC7055S model'. The construction data of the 'NSC7055S model' is stored in the built-in memory for 30 days, and data older than 30 days is automatically deleted. In the case of columnar improvement work, by setting the rotation speed and mortar flow per meter, you can visually check whether the target values are being achieved. Additionally, due to its compact size, it does not take up much space, and its waterproof structure allows for outdoor use. 【Features】 ■ Construction data is stored in the built-in memory for 30 days ■ Receipt printing of construction data can be reprinted ■ Visually check whether target values are being achieved ■ Automatically calculates the amount of mortar for one pipe ■ Easy-to-read analog meter with vertical level (optional) ■ Suitable for outdoor use ■ Multifunctional yet easy to operate *For more details, please refer to the PDF document or feel free to contact us.

  • Construction and process management software
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultrasonic Sensor "WE-008"

Ultrasonic Sensor "WE-008"

By measuring the accumulation rate of the contents in the tank with an ultrasonic sensor, we optimize the frequency of delivery and collection.

By utilizing the WE-008 ultrasonic sensor, it is possible to visualize the accumulation rate in multiple tanks. This allows for deliveries and pickups to occur only at necessary times, leading to reductions in both time and economic costs compared to regularly scheduled deliveries and pickups along fixed routes. The sensor is compact, with a diameter of just over 10 centimeters and a weight of about 600 grams, making it easy for anyone to install. Additionally, the accumulation rate detected by the sensor can be viewed anytime using a dedicated web service. 【Features】 - Built-in battery, no power supply needed (estimated lifespan of 5 years, no need for recharging during use) - Information detected by the sensor is transmitted using a widely available mobile phone network, specifically the 3G network (W-CDMA Rel.7 HSPA), eliminating the need for separate access points like Wi-Fi - In addition to the accumulation rate, it detects temperature, vibration, and location information, and alerts users in case of sudden changes, helping to prevent fires or detect acts of vandalism - Operates normally in harsh environments, from -40 degrees to high temperatures of 85 degrees *For more details, please download the PDF or feel free to contact us.

  • Other security systems
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultrasonic Sensor "WE-009"

Ultrasonic Sensor "WE-009"

By measuring the accumulation rate of the contents in the tank with an ultrasonic sensor, we optimize the frequency of delivery and collection.

By using this service, you can visualize the sedimentation rates in multiple tanks. This allows for deliveries and pickups to occur only when necessary, leading to a reduction in time and economic costs compared to regularly scheduled deliveries and pickups along fixed routes. The sensor is compact, measuring just over 10 centimeters in diameter and weighing about 600 grams, making it easy for anyone to install. Additionally, the sedimentation rates detected by the sensor can be viewed anytime using a dedicated web service. 【Features】 - Built-in battery, no power supply required (estimated lifespan of 5 years, no need for recharging during that time) - Information detected by the sensor is transmitted using a widely available 4G mobile network, eliminating the need for separate access points like Wi-Fi - In addition to sedimentation rates, it detects temperature, vibration, and location information, and will alert you in case of sudden changes. This can help prevent fires and detect acts of vandalism - Operates normally in harsh environments, from minus 40 degrees to high temperatures of 85 degrees

  • Other resource recycling
  • Other security systems
  • Other measuring instruments
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultrasonic Sensor "WE-008L" (for liquids)

Ultrasonic Sensor "WE-008L" (for liquids)

By measuring the accumulation rate of the contents in the tank with an ultrasonic sensor, we optimize the frequency of delivery and collection.

By using this service, you can visualize the sedimentation rates in multiple tanks. This allows for deliveries and pickups to occur only when necessary, leading to reductions in both time and economic costs compared to regular deliveries and pickups on fixed routes. The sensor is compact, measuring just over 10 centimeters in diameter and weighing about 600 grams, making it easy for anyone to install. Additionally, the sedimentation rates detected by the sensor can be viewed anytime using a dedicated web service. 【Features】 - Built-in battery, no power supply needed (estimated lifespan of 5 years, no need for recharging during use) - Information detected by the sensor is transmitted using a widely available mobile phone network, the 3G network (W-CDMA Rel.7 HSPA), eliminating the need for separate access points like Wi-Fi - In addition to sedimentation rates, it detects temperature, vibration, and location information, and alerts you in case of sudden changes. This can help prevent fires and detect acts of vandalism - Operates normally in harsh environments, from minus 40 degrees to high temperatures of 85 degrees

  • Other security systems
  • Other measuring instruments
  • Information and communication equipment and infrastructure
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] Reducing costs, carbon dioxide emissions, and complaints from residents in the UK.

[Case Study] Reducing costs, carbon dioxide emissions, and complaints from residents in the UK.

The transformation into a peaceful and orderly area has resulted in a 51% reduction in complaints from residents.

In the city of Newcastle, UK, traditional waste collection has been carried out for a long time, and no one questioned the practice of stopping by every bin throughout the town. In response, our company partnered with the Newcastle City Council to install 1,200 patented sensors. These sensors monitor the accumulation and collection status, and with the help of advanced analytical software, assess and predict conditions, generating a customized collection schedule tailored to the needs of Newcastle. By aligning waste collection with real-time conditions, Newcastle was able to reduce necessary resources by 50%, and with fewer truck trips, carbon emissions were reduced by 49%. *For more details, please refer to the PDF document or feel free to contact us.*

  • IoT
  • Other Software
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultrasonic sensor

Ultrasonic sensor

Just attach it to the feed tank! Remote monitoring with sensors optimizes both feed production and delivery frequency.

This product is an ultrasonic sensor that realizes "the necessary amount, only when needed," capable of withstanding harsh environments. It can measure not only the remaining amount in the feed tank but also temperature, vibration, and location information (GPS). In the event of trouble or theft, you can be alerted quickly. As long as there is mobile phone reception, it can be used immediately. 【Features】 ■ No power supply or communication equipment required ■ Only installation of the main unit is needed ■ Capable of measuring various data ■ 12 years of proven performance and a comprehensive lineup ■ Information read by the sensor can be checked on a PC or smartphone *For more details, please refer to the PDF document or feel free to contact us.

  • Other measuring instruments
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] Application of Ultrasonic Sensors in Poultry Farming in Chiba Prefecture

[Case Study] Application of Ultrasonic Sensors in Poultry Farming in Chiba Prefecture

A case introduced with the aim of streamlining feed production, improving delivery efficiency, and reducing the effort and labor involved in checking tank levels.

We will introduce a case study of a poultry farmer in Chiba Prefecture using ultrasonic sensors. The sensors were introduced with the aim of streamlining feed production and improving delivery efficiency, and the data collected by the sensors is shared among feed manufacturers, delivery companies, and livestock farmers. Since it is now possible to check the remaining feed in the feed tank at any desired time, arrangements and preparations can be made in advance. 【Case Study】 ■ Purpose of Introduction - Streamlining feed production - Improving feed delivery efficiency - Reducing the effort and labor required to check feed tank levels ■ Usage - Sharing the collected data among feed manufacturers, delivery companies, and livestock farmers - Distributing the costs of the sensors among the three parties *For more details, please refer to the PDF document or feel free to contact us.

  • Other measuring instruments
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Smartphone IoT current meter and power breakdown cloud "Energy Coloring"

Smartphone IoT current meter and power breakdown cloud "Energy Coloring"

Convert current into sound and measure it with a smartphone microphone. The measurement data is categorized in the cloud for real-time visualization.

1. Energy-saving diagnosis work involves a lot of effort in measurement, data analysis, subsidy application paperwork, and replacement work, which is very labor-intensive. 2. Not only can we grasp the customer's electricity consumption status in real-time, but we can also understand the customer's interest in electricity. 3. Equipment updates that require initial costs are often difficult to implement. Energy savings can be achieved even through operational improvements that do not require initial costs.

  • IoT
  • Power and Energy Equipment
  • Power distribution and control panels
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Sensors

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.