Last Updated： Aggregation Period:Jan 07, 2026～Feb 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 07, 2026～Feb 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 07, 2026～Feb 03, 2026
This ranking is based on the number of page views on our site.
1～30 item / All 171 items
Gold plating
It has excellent electrical conductivity, corrosion resistance, and wear resistance. Additionally, due to its excellent light reflectivity, it is widely used as a decorative surface treatment. Neodymium magnets are often coated with nickel plating as a base. Note that gold plating is different from gold-colored plating.
Fluorine composite electroless nickel plating | Surface treatment (release properties, water repellency, slip properties, wear resistance, chemical resistance)
■Outstanding Features Because the fluororesin is uniformly dispersed throughout the entire plated film, not just the plated surface, properties such as water repellency are stably exhibited over a long period. Since it primarily consists of metal plating, it has higher wear resistance compared to fluororesin coatings. Utilizing its high slip properties, it can also be used in areas where lubricating oil cannot be applied. Leveraging its characteristic of being difficult to reduce thermal conductivity, it is also effective for improving the release properties of molds used in cooling molding.
![Inline Process Analyzer [Colorimeter]](https://image.www.ipros.com/public/product/image/1ba/2000278615/IPROS06413102766729637740.jpeg?w=280&h=280)
Measuring light absorption! A process analyzer that measures the presence and concentration of substances.
Dissolved and undissolved substances, as well as gases in a solution, may absorb light at specific wavelengths. Optek's colorimeter is a sensor that measures the presence or concentration of substances by measuring light absorption. There are visible light type and ultraviolet light type absorbance meters available. 【Features】 [Visible Light Type] ■ Supported units: APHA/Hazen, EBC, Lovibond, etc. ■ Wavelengths available: Select from 385 to 1000 nm ■ Capable of detecting one wavelength or two wavelengths in one optical path [Ultraviolet Light Type] ■ Wavelengths available: Select from 254, 280, 290, 300, 313 nm ■ Capable of detecting one wavelength or two wavelengths in one optical path For more details, please refer to the catalog or feel free to contact us.
![Inline Process Analyzer [Biotechnology Applications]](https://image.www.ipros.com/public/product/image/484/2000278677/IPROS02095090083558361410.jpeg?w=280&h=280)
Real-time measurement of pharmaceutical and bioprocesses, proposing quality stabilization and process optimization!
Optek is a world-leading manufacturer of inline process analyzers. As a global partner in the biotechnology industry, Optek provides advanced technologies such as excellent signal amplification technology, support for inline calibration, zero-point calibration, stray light suppression, and a multilingual user interface that facilitates on-site operations. [Biotechnology Applications] - Fermentation - Control of centrifuges - Ultrafiltration - Chromatography - Formulation and filling - Single-use For more details, please refer to the catalog or feel free to contact us.
![Inline Process Analyzer [Food and Beverage Applications]](https://image.www.ipros.com/public/product/image/cd9/2000278721/IPROS47280589625307686446.png?w=280&h=280)
Real-time measurement of food and beverage manufacturing processes, proposing quality stabilization and process optimization!
Optek is a world-leading manufacturer of inline process analyzers. As a global partner in the food and beverage industry, Optek provides advanced technologies such as excellent signal amplification technology, support for inline calibration, zero point calibration, stray light suppression, and a multilingual user interface that facilitates on-site operations. [Food and Beverage Applications] ■ Filters and centrifuges ■ Detection of concentration and hue ■ Phase separation (boundary detection / CIP) ■ Bleaching and mixing ■ Condensate and cooling water For more details, please refer to the catalog or feel free to contact us.
Processing technology using "electroplating"!
"3D Photo Riso" is a processing technology that can uniformly form a resist film on any conductive surface. It was developed using "electroplating," which involves immersing the entire substrate in a liquid phase to deposit a metal film. This technology enables photolithography processing to be applied to the entire three-dimensional shape, including edges and corners. 【Features】 ■ Uniform formation of resist film on conductive surfaces ■ Utilizes "electroplating" ■ Photolithography processing possible on the entire three-dimensional shape, including edges and corners *For more details, please refer to the catalog or feel free to contact us.
Usable from thin sizes! RoHS compliant product with corrosion resistance equivalent to hot-dip galvanizing.
KSG plating is a zinc-tin alloy plating. We have been developing it independently for over 20 years, repeatedly improving it to complete the current method. In the field of electroplating, there are alloy platings that include tin, but the technology for molten tin alloys is exclusively handled by Kowa Industrial Co., Ltd. Additionally, by adopting a centrifugal method, we eliminate the occurrence of pooling, enabling a reduction in subsequent processes, thus achieving high quality at low cost. 【Features】 - Corrosion resistance is almost equivalent to that of molten zinc plating and is relatively strong in acidic environments. - Salt damage resistance is superior to that of molten zinc plating. For more details, please contact us or download the catalog.
In the salt spray test, it has ten times the corrosion resistance of standard hot-dip galvanized coating.
SG plating is a molten zinc alloy plating system consisting of 5% aluminum and 1% magnesium. It is an alloy based on zinc, developed with technical support from Mitsui Mining & Smelting under the name "Super Galva," and has been enhanced with unique technology from Kowa Industrial for over 20 years. While zinc-based plating with about 5% aluminum has been commercialized in the steel sheet sector by blast furnace manufacturers and has established JIS standards, it is often technically challenging in the field of general molten zinc plating, and such plating is rarely performed. Furthermore, there are no other facilities boasting a production capacity of 3,000 tons per month with an 8-meter large kettle for alloy plating. SG plating has a proven track record in harsh environments prone to corrosion due to salt damage, such as coastal areas and heavy snowfall regions. Recently, in collaboration with Nippon Steel, SG plating has successfully developed high corrosion-resistant steel pipes. By combining Nippon Steel's "Strong Seam," known for its excellent workability, with SG plating, steel pipes with outstanding corrosion resistance and workability have been realized. **Features** - Exceptional corrosion resistance - Excellent as a base for painting - Powerful enough to handle large and bulk production - Environmentally friendly surface treatment For more details, please contact us or download the catalog.
Just by applying it, it exhibits a powerful rust prevention effect equivalent to that of galvanization.
【Features】 ■Drop type ○Easy to handle. ○No time limit for use, no mixing required. ■Color change ○Similar to galvanized zinc, the color changes as it is exposed. ■Coating hardness ○The coating becomes harder when exposed. ■Electrical properties ○Releases static electricity when in contact with the coating.
It is a painted zinc coating. The rust prevention effect of the zinc coating has been achieved through painting.
Cold zinc plating "ROVAL" enhances the zinc content in the dry coating to 96%, demonstrating rust prevention capabilities equivalent to hot-dip galvanizing. Additionally, it can be applied at room temperature regardless of location, which is why it is referred to as "cold galvanizing" in contrast to hot-dip galvanizing. It is not only effective for rust prevention and repair of zinc plating on iron but also extends the lifespan of aging zinc coatings. ROVAL has been used in various fields for over 50 years. For more details, please download the catalog.
It is a plating cosmetic spray that changes gloss in the same way as zinc plating.
The plating cosmetic spray "Plating Cover" addresses the issue of dull gray or dark gray "burn" (gray coating) that occurs on the surface during plating processes. Even if there are no problems with corrosion resistance, this can significantly detract from the aesthetic appeal. When repaired with a regular silver pen, the area treated will retain its initial luster while the surrounding plated surfaces oxidize and lose their shine over a few months, making the repaired area stand out even more. Plating Cover is designed to gradually lose its luster along with the surrounding plating, making repairs less noticeable. For more details, please download the catalog.
Achieve the rust prevention effect of zinc plating through painting! It can be applied at room temperature and in any location, making it ideal for rust prevention on iron and for repairing plating!
The room temperature zinc coating "Robal" is an anti-rust paint that can be applied at room temperature, regardless of location. It not only repairs rust prevention and plating on iron but also extends the lifespan of old zinc coatings. Robal has been used in various fields for over 50 years. 【Features】 ■ It is a one-component type, eliminating time restrictions and the need for complicated mixing work. ■ Similar to zinc plating, its color changes as it is exposed. ■ The coating hardens upon exposure. ■ It dissipates static electricity when touched. ■ There are no abnormalities at 170°C (for 24 continuous hours). ■ There are no issues at -60°C (for 1008 continuous hours). *For more details, please request documentation or view the PDF data available for download.
Introducing the "Robal Eco Type" cold zinc plating with a zinc content of 96% that is not subject to three types of regulations!
The "Robal Eco Type" is a room temperature zinc coating model that is not subject to the three-category regulation, designed with environmental and safety considerations. It has high rust prevention performance equivalent to zinc coating and has reduced drying time compared to conventional environmentally friendly products. It can be used for applications such as rust prevention of steel materials, as well as for repairing coatings on cut surfaces and welded areas. 【Features】 ■ High rust prevention performance equivalent to zinc coating ■ Reduced drying time compared to conventional environmentally friendly products ■ Suitable for safety considerations and improvement of working environments ■ Four capacities available to choose from without waste ■ Formaldehyde emission grade F☆☆☆☆ *For more details, please refer to the PDF document or feel free to contact us.
Seeking the truth! If the communication worsens, it might be worth considering a malfunction in the connector terminal.
We would like to introduce a case study on cross-sectional observation of connector plating. We observed the cross-section to see how the plating condition of the connector terminals has changed due to usage. This time, we prepared cross-sectional samples from two locations with different degrees of streaks, one without streaks and one with streaks, to confirm the plating condition. As a result, it was found that compared to the area without streaks, Streak A and Streak B had uneven plating thickness. This is believed to be due to the plating being dragged during the insertion and removal of the connector, causing variations in thickness. 【Overview of Connector Plating Cross-Section】 ■ Cross-section preparation was done using a triple ion milling polisher (commonly known as CP) ■ The plating condition at the streaked locations was observed using SEM ■ Results - No streaks: Surface Au plating thickness is uniform (approximately 350nm) - Streak A: Surface Au plating thickness is uneven (approximately 490nm / approximately 350nm) - Streak B: Surface Au plating thickness is uneven (approximately 130nm / approximately 650nm) *For more details, please refer to the PDF document or feel free to contact us.
Direct plating on glass and Teflon materials with etching-less technology!
"MARBS" is a next-generation plating and three-dimensional wiring technology that combines "nano-level bonding technology" and "innovative plating technology," which are gaining significant attention in Japan. Plating on special materials that are difficult to work with and do not achieve strength with existing technologies is made possible with the "MARBS plating new technology." For example, it can be applied to large surfaces (three-dimensional shapes), simultaneously on both sides, and even inside through-holes. Additionally, electroplating is also possible, allowing for thicker plating. If you are looking for new functional materials or are concerned about material properties and adhesion strength, please feel free to consult with us. 【Features】 ■ Plating on special materials that are difficult to work with and do not achieve strength with existing technologies is possible. ■ Plating can be applied to large surfaces (three-dimensional shapes), simultaneously on both sides, and inside through-holes. ■ Electroplating is also possible, allowing for thicker plating. *For more details, please refer to the related link page or feel free to contact us.
We can accommodate even very small lots! Orders placed by 2 PM will be shipped the same day! Introduction of washers.
This is an introduction to the "washers" available on the online store "Niji Super Dot Com" of Yamamoto Tech Co., Ltd. Our products can be selected from materials such as iron, brass, stainless steel, bronze, aluminum, copper, S45C, titanium, SUS316, SUS316L, and SUS310S. For iron, you can choose from various surface treatments including the raw material (uncoated), chromate, nickel, and more. Additionally, surface treatments tailored to various materials are available. For information on materials and prices, please refer to "Niji Super Dot Com." 【Available Materials】 ■ Iron ■ Brass ■ Stainless Steel ■ Bronze ■ Aluminum ■ Copper, etc. *For more details, please feel free to contact us.
We handle pachinko parts, sandal heels, and decorative items.
We provide a consistent service from the arrival of the fabric, inspection, vapor deposition, top coating, drying, packaging, to shipping.
![[Data] Aluminum alloy mold for injection molding treated with hard iron plating.](https://image.www.ipros.com/public/product/image/5fd/2000542686/IPROS77151786259826599337.png?w=280&h=280)
It's possible to shorten the product development schedule! Why not challenge yourself to reduce lead times and costs with molds?
This document introduces the "hard iron plating treatment for aluminum alloy molds for injection molding" by Japan Platech Co., Ltd. By applying a thin film of hard iron plating to aluminum alloy molds, it is possible to shorten product development schedules and reduce injection molding cycle times. This allows for shorter delivery times for molds and lower costs. If you already have aluminum alloy molds, it is also possible to apply plating treatment to them. Please feel free to consult us. 【Contents】 ■ Would you like to challenge shortening delivery times and reducing costs with molds? ■ Surface treatment using hard iron plating on aluminum alloys ■ Features of aluminum alloy molds for injection molding with hard iron plating ■ Molding tests using aluminum alloy molds with hard iron plating ■ Comparison of aluminum alloy molds and steel molds through cooling analysis *For more details, please refer to the PDF document or feel free to contact us.
![[4-Panel Comic Explanation] 'What is plating?'](https://image.www.ipros.com/public/product/image/da6/2000458248/IPROS33709304478047038166.png?w=280&h=280)
A simple explanation of nickel plating, zinc plating, and plastic plating in manga!
Even though it's called plating, there are various types of plating processes. Depending on the required application, environment, and the material being processed, it can be confusing to determine which plating process is best. In this document, we provide a simple explanation of plating processes through a four-panel comic. [Contents] - What is nickel plating? - What is zinc plating? - What is plastic plating? *For more details, please refer to the PDF document or feel free to contact us.
Super hard anodizing with a surface hardness equivalent to hardened steel (Hv600).
E-Mite UH is an ultra-hard anodizing treatment that further improves the coating hardness of E-Mite SH (Hv500). It achieves a surface hardness of Vickers hardness (Hv) 600 (approximately equivalent to HRC 55). It is suitable for applications where a hard surface treatment that is resistant to scratches is desired, as well as for those requiring wear resistance and excellent corrosion resistance. It is also suitable for applications where reducing the weight of iron components is desired. For more details, please contact us or download the catalog.
![[Document] Column Coupler Construction Guidelines (for Hot-Dip Galvanizing Treatment)](https://image.www.ipros.com/public/product/image/f77/2000444825/IPROS63180322983587525307.jpeg?w=280&h=280)
Column coupler construction method factory welding edition (for hot-dip galvanized treatment)! Features and assembly details included.
This document is the construction manual for the on-site non-welded joint method "Column Coupler" (Factory Welding Edition - for Hot-Dip Galvanizing Treatment). The "Column Coupler" is a joint method that eliminates the need for on-site welding work. It improves the efficiency of the assembly work and helps shorten the construction period. The Factory Welding Edition (for Hot-Dip Galvanizing Treatment) includes the features of the "Column Coupler," as well as information on factory welding and the galvanizing process. [Contents] ■ Introduction (Features of the Column Coupler) ■ Factory Welding and Galvanizing Process ■ Preparation ■ Shaft Production ■ Middle Plate Installation ■ Assembly *For more details, please refer to the PDF document or feel free to contact us.
![Mitsuya Development Plating [High Lubricity, Low Contact Resistance, Non-Magnetic]](https://image.www.ipros.com/public/product/image/8d4/2000227638/IPROS4263421505109833793.JPG?w=280&h=280)
For those who need non-magnetic and lubricating properties, please give it a try!
With the advancement of high technology in devices that are sensitive to magnetism, the density and performance of measuring and analytical instruments are improving. As a result, there is a growing demand for non-magnetic properties not only in the main functional components but also in connectors and contact parts that were previously overlooked. Additionally, with the economic growth of emerging countries, the introduction of the aforementioned measuring and analytical instruments is progressing. However, due to the high cost of the equipment itself, the frequency of updates is much slower than in developed countries, and a longer lifespan is desired. Therefore, we have developed a non-magnetic coating that enhances the longevity of insertion and removal cycles and reduces contact resistance, improving the specifications as outlined below: - Maintains low contact resistance even after 60,000 sliding tests - Solder wetting properties and contact resistance are equivalent to conventional products! - Non-magnetic just like conventional products! *For more details, please download the catalog or contact us.
Excellent wear resistance and sliding properties! High hardness of about Hv155 and capable of being made into a thin film!
Hard silver plating is a product developed for the charging terminal applications of electric vehicles (EVs) and plug-in hybrid electric vehicles (PHEVs). Compared to conventional silver plating hardness of Hv80-110, it has a high hardness of about Hv155 (+15 -5), and excels in sliding properties and wear resistance. In particular, it is possible to reduce the thickness of the coating with hard silver plating in areas where conventional silver plating was previously applied as a thick film. Compared to silver plating, it tends to have lower friction, and the contact resistance value remains stable even with a high number of insertions and removals. 【Features】 ■ Excellent sliding properties and wear resistance ■ High hardness of about Hv155 ■ Ability to reduce thickness in areas previously addressed with thick conventional silver plating ■ Expected to be applied to connectors for industrial equipment requiring insertion and removal *For more details, please refer to the PDF document or feel free to contact us.
Improving contact resistance and high-temperature durability of fuel cells (SOFC)!
Cobalt-nickel alloy plating has good mechanical properties, durability, and heat resistance. [Composition ratio] Co 70wt%: Ni 30wt% each ±5wt% [Film thickness] ~3μm In examples where plating was applied to components of solid oxide fuel cells (SOFC), when used at high temperatures around 800°C, the resistance of typical metal components tends to increase. However, by applying cobalt-nickel alloy plating compared to untreated or nickel-plated components, a lower resistance value can be maintained.
It is environmentally friendly gold plating!
By converting environmentally concerning substances such as cobalt and nickel into iron, which is a non-environmentally harmful iron group element, it can be expected to serve as an environmentally friendly alternative plating.
![[Surface Treatment Service] Plating with excellent solder wettability and a matte appearance.](https://image.www.ipros.com/public/product/image/1c0/2000068241/IPROS8093987984812013138.jpg?w=280&h=280)
Incredibly short delivery times! We can achieve same-night delivery for morning orders depending on the conditions.
The plating with excellent solder wettability and a matte appearance is a replacement type Sn plating solution, which results in fewer pinholes and a uniform matte Sn coating simply by immersing copper. It has better solder wettability than electroless Ni-P/replacement Au plating. 【Features】 ○ As it is a replacement type Sn plating solution, fewer pinholes and a uniform matte Sn coating are deposited just by immersing copper. ○ Better solder wettability than electroless Ni-P/replacement Au plating. ○ Ideal for printed circuit boards (plated areas are copper). ○ Wide support from research and development to prototyping and mass production. For more details, please download the catalog or contact us.
![[Free Evaluation Sample Provided] Electrodeposited Gold Plating and Tin-Copper Plating Services](https://image.www.ipros.com/public/product/image/f57/2000096656/IPROS4093958513162233653.jpg?w=280&h=280)
Incredibly short delivery time! Depending on the conditions, we can achieve order in the morning and delivery by the evening.
At Sankyo Co., Ltd., we focus on three plating services: electrolytic hard gold plating, electrolytic soft gold plating, and electrolytic tin-copper plating. These services are primarily used for flexible printed circuit boards and printed circuit boards. 【Types and Features of Plating】 ● Electrolytic Hard Gold Plating - Excellent solderability - Superior corrosion resistance - High contact performance ● Electrolytic Soft Gold Plating - Excellent bonding and solderability High purity (99.99% or higher) and low hardness (90 Hv or lower) - Excellent uniform electrodeposition - Superior corrosion resistance ● Electrolytic Tin-Copper Plating - Environmentally friendly as it does not contain lead or fluorides (low pollution) - Excellent solderability due to stable coating characteristics (tin-copper ratio of 99:1) - Superior heat resistance and discoloration resistance 【Limited to first-time customers, we offer free evaluation samples up to 10 sheets!】 ◎ By downloading the catalog, you can view the company profile of Sankyo Co., Ltd. ◎ Please download the catalog to confirm the details of our technical analysis.
Recycled plating that is cheaper than buying new products, has a longer product lifespan, and is also environmentally friendly.
At Hanaka Industry, we also accept inquiries about our regeneration plating service, which restores rusty used mesh pallets to like-new condition. This regeneration plating is more affordable than purchasing new products, has a longer product lifespan, and is environmentally friendly. We encourage you to consider it. We can regenerate everything from electroplated items to Dacromet-coated products, and even items that have developed red rust. The treatment uses KSG (melted zinc-tin alloy) plating, which results in a burr-free finish that is resistant to rust and lasts longer after regeneration. Its corrosion resistance is almost equivalent to that of hot-dip galvanized plating. Due to its sacrificial corrosion protection, it is less likely for red rust to occur even if the plating film is damaged by scratches. The KSG plating we use is hexavalent chromium-free, lead-free, and cadmium-free, complying with RoHS directives. For more details, please contact us or refer to our catalog.
