Ultrasound system (sound pressure measurement analysis 100MHz, oscillation control 25MHz) No. 2

- Technology for controlling nonlinear ultrasonic phenomena, enabling nano-level stirring, emulsification, dispersion, and grinding techniques.

Ultrasonic Treatment 1: "Nanopowdering" Ultrasonic Treatment 2: "Liquid Homogenization and Flowability Improvement" The Ultrasonic System Research Institute has developed a "technology for liquid homogenization and flowability improvement using ultrasonic control of nonlinear phenomena (acoustic flow)." This technology utilizes (evaluates) the ultrasonic propagation characteristics (analysis results) of indirect containers, ultrasonic tanks, and other items through surface inspection to control ultrasonic (cavitation and acoustic flow). Furthermore, it achieves effective ultrasonic (cavitation and acoustic flow) propagation states tailored to the structure, material, and acoustic properties of specific target objects, by controlling the ultrasonic oscillation in accordance with the interactions between glass containers, ultrasonic waves, and target objects. In particular, the dynamic characteristics of harmonics through acoustic flow control enable responses at the nanoscale. It has been applied and developed from the example of dispersing metal powders to nanosize.

• pump
• Water supply facilities
• others

Application technology of <measurement, analysis, and control> using ultrasonic testers.

The Ultrasonic System Research Institute has developed "ultrasonic propagation control technology" using titanium straws based on the classification of cavitation and acoustic flow. This system technology controls changes in acoustic flow according to its intended use by analyzing the complex variations of flow, ultrasound, and fine bubbles through sound pressure measurement analysis that includes various interactions. Practically, it is a method to optimize ON/OFF control (or control of flow rate, flow velocity, etc.) for a degassing fine bubble generation liquid circulation device for showers against various interactions and vibration modes. In particular, by controlling the acoustic characteristics of titanium straws and the oscillation control of megahertz ultrasound, it achieves the effects of a new dynamic ultrasonic control technology by controlling the original nonlinear resonance phenomenon (Note 1). Note 1: Original Nonlinear Resonance Phenomenon This phenomenon occurs when the generation of harmonics caused by original oscillation control is realized at high amplitudes through resonance phenomena, resulting in ultrasonic vibration resonance. Ultrasonic propagation characteristics: 1) Vibration modes 2) Nonlinear phenomena 3) Response characteristics 4) Interactions

• Non-destructive testing
• Other measuring instruments
• others

Application of feedback analysis using multivariate autoregressive models.

Features (in the case of standard specifications) * Measurement (analysis) frequency range Specification: 0.1 Hz to 100 MHz * Surface vibration measurement is possible * Continuous measurement for 24 hours is possible * Simultaneous measurement of any two points * Measurement results displayed in graphs * Utilization of original analysis software for time series data This is a measurement system using ultrasonic probes. Measurements are conducted by attaching the ultrasonic probe to the target object. For the measured data, considering position and state along with elastic waves, various acoustic performances are detected. Consulting services are available for sound pressure measurement analysis technology: 1) Operation of measurement equipment 2) Operation of analysis software 3) Evaluation methods for analysis results <Concept of Analysis: Statistical Thinking> Statistical mathematics has both abstract and concrete aspects, and through contact with concrete elements, abstract thoughts or methods are developed, which is the characteristic of statistical mathematics. Ultrasonic propagation characteristics: 1) Detection of vibration modes 2) Detection of nonlinear phenomena 3) Detection of response characteristics 4) Detection of interactions

• others

Proposal for a cleaning method optimized with fine bubbles and megahertz ultrasonic waves.

The Ultrasonic System Research Institute conducts improvements to ultrasonic cleaning machines (consulting available) using original products: ultrasonic systems (sound pressure measurement analysis, oscillation control). For the current ultrasonic cleaning machines, we propose and implement improvement methods based on sound pressure measurement and analysis. Specifically, we will discuss the level of improvement through measurement and verification of ultrasonic cleaning machines using our original product: Ultrasonic Tester NA (recommended type), which allows for easy measurement and analysis of ultrasonic waves. Depending on the level of improvement, we will suggest the use of our original product: Ultrasonic Oscillation System (1 MHz, 20 MHz), which allows for easy control of ultrasonic oscillation. Based on the conditions of the water tank, cleaning solution, items to be cleaned, and cleaning level, we will propose a degassing fine bubble generation liquid circulation device. Ultrasonic propagation characteristics: 1) Detection of vibration modes (changes in self-correlation) 2) Detection of nonlinear phenomena (changes in bispectrum) 3) Detection of response characteristics (analysis of impulse response) 4) Detection of interactions (analysis of power contribution rates)

• Non-destructive testing
• Scientific Calculation and Simulation Software
• others

We will measure, analyze, and evaluate the propagation state of ultrasound using an ultrasonic tester.

Features (for standard specifications) * Measurement (analysis) frequency range Specification: 0.1 Hz to 10 MHz * Ultrasonic oscillation Specification: 1 Hz to 100 kHz * Capable of measuring surface vibrations * Continuous measurement for 24 hours * Simultaneous measurement of any two points * Display of measurement results in graph form * Attached software for time series data analysis This is a measurement system using an ultrasonic probe. The ultrasonic probe is attached to the target object for oscillation and measurement. The measured data is analyzed considering position, state, and elastic waves, detecting various acoustic performances. Ultrasonic Probe: Outline Specifications Measurement range: 0.01 Hz to 10 MHz Oscillation range: 1 kHz to 25 MHz Propagation range: 1 kHz to over 900 MHz Materials: Stainless steel, LCP resin, silicone, Teflon, glass... Ultrasonic Propagation Characteristics 1) Detection of vibration modes (changes in self-correlation) 2) Detection of nonlinear phenomena (changes in bispectrum) 3) Detection of response characteristics (analysis of impulse response) 4) Detection of interactions (analysis of power contribution rates)

• Non-destructive testing
• Other measuring instruments
• others

Optimization of cavitation and acoustic flow using a degassed fine bubble generation liquid circulation device.

The Ultrasonic System Research Institute has developed an ultrasonic cleaning machine utilizing microbubbles, based on measurement, analysis, and evaluation techniques related to ultrasonic propagation phenomena, which can also be used for ultrasonic processing, stirring, and chemical reactions. Recommended System Overview 1: Two types of ultrasonic transducers (standard types 38 kHz, 72 kHz) that perform surface modification treatment using ultrasonic waves and microbubbles. 2: An ultrasonic dedicated tank (standard type, inner dimensions: 500*310*340mm) that performs surface modification treatment using ultrasonic waves and microbubbles. 3: A degassing and microbubble generation liquid circulation system. 4: An optimization control system for ultrasonic output and liquid circulation via a control device. 5: An acoustic pressure management system using an ultrasonic tester. *Features This is an effective device utilizing an ultrasonic dedicated tank. Due to the efficient use of ultrasonic waves, the strength and durability of a standard tank are insufficient. Depending on the target and purpose of cleaning, stirring, and surface modification, two types of ultrasonic transducers are combined and controlled. The recommended combination is in the state of 38 kHz and 72 kHz. Technology for stably utilizing fine bubbles of 20 μm or less.

• pump
• Scientific Calculation and Simulation Software
• others

Ultrasonic oscillation control system using a commercial function generator and ultrasonic oscillation probe.

The Ultrasonic System Research Institute has published a method for applying the "Ultrasonic Oscillation System (1 MHz)," which allows for easy control of ultrasonic oscillation, through timer control. Specific examples: 1) Preventing the deterioration of machining oil by irradiating it with ultrasound at night. 2) Improving quality through ultrasonic irradiation on NC machines. 3) Irradiating shelves that store metal and resin parts with ultrasound (surface modification). 4) Improving fluidity and uniformity of concentration by irradiating plating solutions, cleaning solutions, solvents, etc., with ultrasound. 5) Enhancing welding quality by irradiating welding machines with ultrasound. 6) Relieving surface residual stress by irradiating brazing devices and bending processing devices with ultrasound. 7) Improving cleaning levels by irradiating ultrasonic cleaning machines with ultrasound. ... ... 19) Others: 1: Combined use with various vibrations (e.g., motors, etc.). 2: Maintenance through ultrasonic irradiation during holidays (2-3 hours). 3: Aging treatment through ultrasonic irradiation. ... ... Combined use with fine bubbles. Combined oscillation control of multiple ultrasonic sources. Use of ultrasonic propagation tools.

• Non-destructive testing
• Other measuring instruments
• others

Control technology for acoustic flow (the main cause of ultrasonic effects: nonlinear phenomena) using ultrasound and fine bubbles.

The Ultrasonic System Research Institute has developed a method (system) for the <analysis and evaluation> of ultrasound, applying "measurement, analysis, and control" technology related to the nonlinearity of ultrasound. We provide consulting for a degassing microbubble generation liquid circulation system utilizing this technology. To utilize (control) the complex and changing conditions of ultrasound in a stable state, we conduct consulting to add the degassing microbubble generation liquid circulation system to specific tanks present on-site. 1: Explanation of principles 2: Specific proposals tailored to the cleaning machine (device) 3: Explanation of know-how 4: Explanation of verification methods, adjustment methods, and maintenance methods Development of nonlinear vibration control technology using fine bubbles and megahertz ultrasound Regarding this technology, we provide consulting as "vibration measurement technology utilizing ultrasound." Ultrasound propagation characteristics: 1) Detection of vibration modes (changes in self-correlation) 2) Detection of nonlinear phenomena (changes in bispectrum) 3) Detection of response characteristics (analysis of impulse response characteristics) 4) Detection of interactions (analysis of power contribution rates)

• pump
• Other analytical equipment
• others

Ultrasonic cleaning system that achieves ultrasonic control tailored to the purpose.

This is an effective device using a dedicated ultrasonic tank (original manufacturing method). Due to the high efficiency of ultrasonic utilization, standard tanks lack sufficient strength and durability. Depending on the target and purpose, multiple ultrasonic waves and a degassing fine bubble generation liquid circulation device are controlled based on sound pressure measurement analysis for cleaning, stirring, and surface modification. We propose various combinations and usage (control) methods. The key point is to achieve an ultrasonic propagation state tailored to the target, focusing on the "dissolved oxygen concentration distribution" and "liquid circulation" within the dedicated tank. << Degassing Fine Bubble (Microbubble) Generation Liquid Circulation Device >> 1) By narrowing the suction side of the pump, cavitation is generated. 2) Cavitation causes bubbles of dissolved gases to form. The above describes the state of the degassing liquid circulation device. 3) As the concentration of dissolved gases decreases, the bubble size of dissolved gases due to cavitation becomes smaller. 4) Through appropriate liquid circulation, fine bubbles (microbubbles) smaller than 20μ are generated. The above describes the state of the degassing microbubble generation liquid circulation device.

• Other measuring instruments
• Scientific Calculation and Simulation Software
• others

A completely new vibration measurement technology using original products (ultrasonic testers).

The Ultrasonic System Research Institute has developed a completely new <vibration measurement technology> using its original product (ultrasonic tester). The ultrasonic sound pressure measurement analysis technology developed so far applies the "measurement, analysis, and control" technology related to the nonlinear phenomena of ultrasound. From the accumulation of data measuring, analyzing, and evaluating the dynamic characteristics of ultrasound propagating on surfaces, we have developed technology that can <measure, analyze, and evaluate> vibration states from low frequencies (0.001 Hz) to high frequencies (700 MHz). Regarding vibrations and noise from buildings and roads, equipment, devices, walls, piping, desks, handrails... as well as the vibrations at the moment of metal melting during welding and instantaneous vibrations during machining, we have made it possible to respond with vibration control and management based on the measurement and analysis of new vibration phenomena. This is a new method and technology, and various application cases have developed from the analysis results so far. In particular, continuous data collection for a standard measurement time of 72 hours is possible, allowing measurement of low-frequency vibrations and irregularly fluctuating vibrations (maximum measurement can be overwritten over a continuous period of 14 days).

• Non-destructive testing
• Other measuring instruments
• others

Optimization of Ultrasonic Propagation State Based on Acoustic Pressure Measurement Analysis - Optimal Control of Resonance Phenomena and Nonlinear Phenomena -

Methods to Improve the Current Ultrasonic Cleaning Machine (Development of Optimization Technology for Ultrasonic Tanks and Liquid Circulation) The Ultrasonic System Research Institute has developed technology to control the propagation state of ultrasonic waves by analyzing the effects of the structure, strength, and manufacturing conditions of the ultrasonic tank, as well as by setting the method of liquid circulation within the tank. This technology allows for the analysis and evaluation of the dynamic characteristics of complex ultrasonic vibrations in relation to various factors, enabling the setting of the circulation pump method to adjust the effects of cavitation and acceleration according to specific objectives. Note: The settings regarding the relationship between the tank, circulating liquid, and air are proprietary knowledge. This technology can also be applied to tanks that do not have an overflow structure. As a specific response, we can address the issues of ultrasonic attenuation caused by the current tank by adjusting the settings of the liquid circulation pump. In particular, for precise cleaning at the nano level, we propose additional measures for oscillation control using megahertz ultrasonic oscillation probes.

• pump
• Turbid water and muddy water treatment machines
• Water treatment technology and systems

Ultrasound measurement and analysis can be easily performed with the ultrasound tester NA (10MHz oscilloscope type).

The Ultrasonic System Research Institute (located in Hachioji City, Tokyo) has developed the Ultrasonic Tester NA (100MHz oscilloscope type), which makes ultrasonic measurement and analysis easy. Features (Standard Specifications) - Measurement (Analysis) Frequency Range: 0.1Hz to 10MHz - Ultrasonic Oscillation: 1Hz to 1MHz - Capable of measuring surface vibrations - Continuous measurement for 24 hours - Simultaneous measurement of any two points - Display of measurement results in graph form - Attached software for time-series data analysis This is a measurement system using ultrasonic probes. The ultrasonic probe is attached to the target object for oscillation and measurement. The measured data is analyzed considering position, state, and elastic waves, detecting various acoustic performances.

• Other analytical equipment

"Ultrasonic system" technology that enables control of ultrasonic propagation conditions in the 1-900 MHz range.

The Ultrasonic System Research Institute has developed ultrasonic system technology that enables control of ultrasonic propagation states from 1 to 900 MHz by utilizing a megahertz ultrasonic oscillation control probe for ultrasonic equipment. This is a new application technology for precision cleaning, processing, stirring, welding, and plating, based on the measurement, analysis, evaluation, and technology of ultrasonic propagation states. By utilizing the acoustic properties (surface elastic waves) of various materials, ultrasonic stimulation can be controlled for several tons of objects even in a 1000-liter water tank with an ultrasonic output of less than 20W. It was developed as an application method for nonlinear phenomena through an engineering (experimental and technical) perspective on elastic wave phenomena and an abstract algebraic ultrasonic model. The key point is the use of tools (elastic bodies: metal, glass, resin). By confirming the ultrasonic propagation characteristics based on the conditions of the target object, it is important to address it as an original nonlinear resonance phenomenon (Note 1). Note 1: Original Nonlinear Resonance Phenomenon This occurs when the generation of harmonics caused by original oscillation control is realized at high amplitudes through resonance phenomena, resulting in ultrasonic vibration resonance phenomena.

• Other measuring instruments
• Scientific Calculation and Simulation Software
• others

#Intersolar South America - We invite you to attend the most influential solar energy event in Latin America. You will be able to see innovative solar mounting solutions designed for the Latin American market. At booth R2.82, Grace Solar will showcase how it is evolving regional solar projects: - Ground-mounted solar mounting systems suitable for Brazil's tropical storms and humid environments - Flexible roof installation systems that can accommodate diverse architectural needs Let's build the future of solar power together! Venue: Expo Center Norte, São Paulo, Brazil, Booth R2.82 Date: August 26-28, 2025

We have introduced the commercial aroma diffuser "Majesta Fragrance" to a cabaret club in Tokyo. The selected scent is "Royale," which offers a sense of calm and elegance. It spreads naturally throughout the floor, creating a high-quality space that satisfies the five senses. Majesta Fragrance is available for a free trial installation exclusively in the Kanto area. If you are interested in enhancing your store's scent experience, please feel free to contact us.

We have released a catalog for a trial version of a conceptual skills course designed to efficiently develop logical thinking and problem-solving skills in a short period. The course is structured in three levels, from basic to practical and applied, supporting skill enhancement directly related to work through video viewing, exercises, and detailed feedback. There is also a free trial version available, lasting about 10 to 20 minutes, allowing you to easily check the course content and approach. It is ideal for promotion and advancement exam preparation, as well as for developing the next generation of leaders, with a proven track record in many companies. For detailed materials or to apply for the trial version, please use the link below. Feel free to take advantage of it!

The RTC series rugged tablets are designed to withstand harsh industrial environments, enhancing productivity, improving safety, and reducing operational costs. The RTC-I116-JP is equipped with a 12th generation Intel Core i7/i5 processor and Windows 10/11, and its 11.6-inch touchscreen allows for precise operation even in rainy conditions or while wearing gloves. Additionally, the display with a brightness of 1,000 nits ensures clear visibility even under direct sunlight, and with IP66 compliance, a 1.2m drop resistance, and hot-swappable capabilities, it strongly supports continuous operation in the field. Factory options: ★ 2D barcode scanner RTC-2D-Z ★ NFC module RTC-NFC116 A wide range of selectable options: ■ Vehicle RAM bracket RTC-RAM ■ Vehicle charger (for vehicle batteries) RTC-VC-19D ■ Vehicle charger (for cigarette sockets) RTC-VC-100W ■ Shoulder strap RTC-SS ■ Stylus pen RTC-SP ■ Lithium-ion battery (3800mAh) RTC-LB-3800

Based on practical experience in support companies and business companies, SBS Marketing Co., Ltd. provides consulting services related to marketing, sales promotion, and customer acquisition mainly in the BtoB (business-to-business) sector. On August 12, 2025 (Tuesday), they published the page "Read in One Go During Obon! Top 10 Accesses from April to June." This page introduces the top 10 blog articles by access count from April to June 2025 that you want to read in one go during Obon. (Page Overview: Excerpts) ■10th: "Filter Bubble" ■09th: Should 'Phone Numbers' Be Public on Websites!? ■08th: "In-group Bias" ■07th: "Peter Pan Syndrome" ■06th: "Butterfly Effect" ■05th: Useful for Business! Downloadable Content ■04th: "Reaction Formation" ■03rd: Is "Quality Over Quantity" Important? Or is "Quantity Over Quality" Important? ■02nd: "The Emperor's New Clothes" Phenomenon ■01st: "Janet's Law" ▼ For more details, please visit this page. https://sbsmarketing.co.jp/blog/top-10-accesses-in-2025-2q-2025-08/