Development of optimization technology for ultrasonic water tanks and liquid circulation.

Ultrasound measurement and analysis can be easily performed with the ultrasound tester NA (10MHz oscilloscope type).

The Ultrasonic System Research Institute (located in Hachioji City, Tokyo) has developed the Ultrasonic Tester NA (100MHz oscilloscope type), which makes ultrasonic measurement and analysis easy. Features (Standard Specifications) - Measurement (Analysis) Frequency Range: 0.1Hz to 10MHz - Ultrasonic Oscillation: 1Hz to 1MHz - Capable of measuring surface vibrations - Continuous measurement for 24 hours - Simultaneous measurement of any two points - Display of measurement results in graph form - Attached software for time-series data analysis This is a measurement system using ultrasonic probes. The ultrasonic probe is attached to the target object for oscillation and measurement. The measured data is analyzed considering position, state, and elastic waves, detecting various acoustic performances.

• Other analytical equipment

Application technologies of <control, measurement, analysis, evaluation> using ultrasonic testers.

The Ultrasonic System Research Institute has developed a new ultrasonic characteristic evaluation technology using megahertz ultrasonic oscillation, based on the analysis results of ultrasonic data propagating on the surface of target objects. This method applies measurement and analysis technology for "sound pressure and vibration" controlled by ultrasonic probe oscillation. We provide consulting and evaluation technology explanations tailored to the development of ultrasonic probes suited to the target object's surface propagation vibration modes. This is an application of new ultrasonic oscillation control technology. By utilizing nonlinear phenomena related to megahertz ultrasonic propagation states that match the acoustic characteristics of the target object, it is possible to detect new features regarding the surface condition of the target object. In particular, it serves as a fundamental technology for surface inspection of substrate components and preliminary evaluation of precision cleaning parts, utilizing response characteristics derived from combinations of oscillation and reception, establishing new evaluation parameters for ultrasonic vibrations. By constructing and modifying a logical model based on the measurement, analysis, and evaluation of the dynamic characteristics of ultrasonic surface elastic wave propagation phenomena, we have enabled effective utilization tailored to the objectives (evaluation).

• Non-destructive testing
• Other measuring instruments
• others

---Optimization Technology for Ultrasonic Utilization---

The Ultrasonic System Research Institute provides the following services through its original products: ultrasonic systems (sound pressure measurement analysis, oscillation control). 1) Manufacturing and sales of ultrasonic systems (sound pressure measurement analysis, oscillation control) 2) Consulting services related to ultrasonic utilization technology << Manufacturing and Sales >> 1) Original product: Ultrasonic system (sound pressure measurement analysis, oscillation control) System overview (standard system): - Ultrasonic tester NA 10MHz type - Oscillation system 20MHz type Price: 281,050 yen (including tax: 10% consumption tax) 2) Degassing fine bubble generation liquid circulation device Device overview: - Magnetic pump (Iwaki Magnetic Pump MD series MD-70RZ) - Timer - Hose and others Price: 99,000 yen (including tax: 10% consumption tax) 3) Other (onsite support: delivery, installation, operation explanation, etc.) Consulting fees (Estimates will be proposed based on the conditions for onsite visits...)

• Other measuring instruments

Control technology for acoustic flow (nonlinear phenomena) based on sound pressure measurement analysis.

The Ultrasonic System Research Institute has developed a system that applies technology to measure and analyze the state of ultrasonic waves propagating in the liquid within an ultrasonic tank, setting and controlling the propagation state of ultrasonic waves according to the effects of the tank's structure, strength, manufacturing conditions, and the state of liquid circulation. The liquid circulation within the ultrasonic tank is captured as a system, and the primary purpose of many ultrasonic (tank) applications is to predict or control the sound pressure changes of the liquid inside the tank. However, numerous issues have been pointed out in many implementations due to discrepancies between theory and practice. In response to such cases: 1) The removal of obstacles involves the use of statistical data analysis methods, which is the technology for measuring and analyzing ultrasonic propagation states. 2) Based on the results of data analysis related to the subject, the characteristics of the subject are confirmed, which is the technology for detecting the acoustic properties related to the surface elastic waves of the object. 3) Progressing to control realization through characteristic confirmation involves technology for controlling nonlinear phenomena. By employing the above methods, the utilization state of ultrasonic waves has been improved for efficient use, and there are numerous examples of original systems that have realized the intended use of ultrasonic waves.

• Vibration and Sound Level Meter
• Scientific Calculation and Simulation Software
• others

Acoustic property test using ultrasound

The Ultrasonic System Research Institute offers custom-made ultrasonic probes that can control ultrasonic propagation states from 500 Hz to 900 MHz. We manufacture and develop original ultrasonic oscillation control probes tailored to specific purposes. The key point is the operational confirmation of the original probes. The responsiveness to dynamic changes in ultrasonic transmission and reception is the most important factor. This characteristic determines the range of applications for harmonics. Currently, we can accommodate the following ranges: Ultrasonic Probe: Outline Specifications Measurement Range: 0.01 Hz to 100 MHz Oscillation Range: 1 kHz to 25 MHz Propagation Range: 1 kHz to over 900 MHz Materials: Stainless steel, LCP resin, silicone, Teflon, glass, etc. Oscillation Equipment: Example - Function Generator By understanding the acoustic properties of metals, resins, glass, etc., we achieve propagation states tailored to specific purposes regarding sound pressure levels, frequencies, and dynamic characteristics through oscillation control. This is a new foundational technology for precision cleaning, processing, stirring, inspection, etc., based on measurement, analysis, and evaluation techniques for ultrasonic propagation states.

• Non-destructive testing
• Other measuring instruments
• others

Consulting support from the Ultrasonic System Research Institute.

The Ultrasonic System Research Institute will conduct online individual consulting as follows: Participants: 1 company (available range for Microsoft Teams meeting) Cost: 30,000 yen (including tax 33,000 yen) Duration: 150 minutes (e.g., 9:30 AM - 12:00 PM, 1:00 PM - 3:30 PM) Schedule: To be arranged Others: 1) Please use a PC 2) Use of Zoom and Microsoft Teams meeting <Purpose of the Event> ■ Introduction We will conduct online consulting for one participating company (or within the available range for Microsoft Teams meeting). Regarding the use of ultrasound, we will provide specific know-how explanations and discussions based on experience and achievements. If you are interested, please contact us via email. We will propose consulting on your desired theme.

• Water Treatment
• Non-destructive testing
• others

- Feedback Analysis Using Autoregressive Models: Analysis of Power Contribution Rates - Effects of Tanks and Ultrasound, Cleaning Materials and Ultrasound, Adjacent Tanks, ...

Development of technology to measure, analyze, and evaluate the interaction of ultrasonic vibrations -- Feedback analysis of sound pressure data: Analysis of power contribution rate -- The Ultrasonic System Research Institute has developed technology to measure, analyze, and evaluate various interactions by analyzing time-series data obtained from ultrasonic sound pressure measurements. As a result, this has evolved into technology that optimizes ultrasonic utilization conditions based on the evaluation of interactions. Specifically, there are the following examples: 1) Optimization of selection criteria for ultrasonic oscillation frequency and output level 2) Optimization of ultrasonic oscillation control conditions 3) Optimization regarding the installation of tanks and ultrasonic (transducers) 4) Optimization of liquid circulation devices and control conditions 5) Optimization of design conditions for tanks and ultrasonic systems 6) Optimization of cleaning solutions, detergents, solvents, etc. 7) Optimization with adjacent tanks, jigs, etc. It is possible to develop original ultrasonic systems tailored to specific purposes.

• Vibration and Sound Level Meter
• Scientific Calculation and Simulation Software
• others

Design, development, manufacturing, and technology of ultrasonic equipment tailored to specific purposes based on the measurement and analysis of ultrasonic vibrations—aging treatment of ultrasonic equipment.

Development of a Dedicated Ultrasonic Tank The Ultrasonic System Research Institute has developed a dedicated ultrasonic tank by applying measurement technology related to the propagation state of ultrasound. As a result of using the newly developed dedicated ultrasonic tank for ultrasonic cleaning and surface modification, it has become easier to control not only the utilization efficiency of ultrasound but also the propagation states of cavitation and acceleration. This represents a completely new manufacturing technology (Note) for tanks and surface treatment technology, and it has been confirmed to be a significant achievement through measurement and analysis of the states. Note: Original design, manufacturing, and adjustment methods. This method and technical know-how are offered as part of our consulting services. Ultrasonic Propagation Characteristics 1) Detection of vibration modes (changes in autocorrelation) 2) Detection of nonlinear phenomena (changes in bispectrum) 3) Detection of response characteristics (analysis of impulse response) 4) Detection of interactions (analysis of power contribution rates) Note: "R" is a free statistical processing language and environment. autcor: autocorrelation analysis function bispec: bispectrum analysis function mulmar: impulse response mulnos: power contribution rate

• pump
• Other measuring instruments
• others

Leading to new applications of ultrasound from sound pressure and vibration data of ultrasound.

Application of ultrasonic sound pressure measurement, analysis, and evaluation technology The Ultrasonic System Research Institute has developed a method for the analysis and evaluation of ultrasound (system technology) that applies measurement, analysis, and control technology related to the nonlinearity of ultrasound. Using this technology, we will provide measurement, analysis, and evaluation support for ultrasonic devices. For specific support and costs, please contact us via email. *Comment* Currently, regarding the use of ultrasound, I believe it is very difficult to detect and confirm the optimal ultrasonic state for the intended purpose. Therefore, by incorporating "sound pressure data" into the daily management of ultrasound, we aim to resolve the relationship with the final evaluation state (defect rate, yield, etc.) through the accumulation and analysis of statistical data. By analyzing using time-series data analysis technology, effective improvements have been realized. As a result of continuing such improvements, the number of successful cases using low-output ultrasonic oscillation control has increased. We have been manufacturing and selling our original product: ultrasonic systems (sound pressure measurement analysis, oscillation control) since March 2021.

• Non-destructive testing
• Other measuring instruments
• others

Optimization technology based on measurement and analysis of ultrasonic propagation of the target.

<Dynamic Control System for Ultrasound> The propagation state of ultrasound is captured as a system, and analysis and control are performed. Many purposes for utilizing ultrasound involve predicting or controlling the nonlinear phenomena of ultrasound propagating through target objects or liquids. However, in many implementations, numerous issues have been pointed out due to the differences between the theory of cavitation and actual results. In response to such cases: 1) To eliminate obstacles, for ultrasound that changes over time, statistical data processing of sound pressure data is conducted, known as <Measurement and Analysis Technology for Ultrasound Propagation State>. 2) Based on the results of data analysis related to the target, the acoustic characteristics of the target are confirmed through <Technology for Detecting Acoustic Characteristics Related to Surface Elastic Waves of Target Objects and Acoustic Flow of Target Liquids>. 3) By confirming the characteristics, progress is made towards achieving dynamic control of ultrasound through <Technology for Controlling Nonlinear Phenomena with Sweep Oscillation Control for Multiple Ultrasounds>. Through these methods, the utilization state of ultrasound has been improved for efficient use, and there are numerous examples of original ultrasound control systems that achieve the intended use of ultrasound.

• pump
• Analysis and prediction system
• others

Dynamic control technology for ultrasonic cleaning machines.

The Ultrasonic System Research Institute has developed ultrasonic cleaning technology utilizing the "Constructal Law" related to flow and shape. <References> 1) On Vibration From the Royal Institution's 133rd lecture "Vibration" I intend to describe almost all of the important fields of mechanical engineering here. [Author] Richard B. Bishop [Translator] Hidetaro Nakayama, Kodansha (1981, B-471) 2) Flow and Shape The evolution of all shapes is governed by the "Constructal Law," which aims to improve flow! [Authors] Adrian Bejan, J. Peder Zane [Translator] Hiroyuki Shibata, [Commentator] Shigeo Kimura, Kinokuniya (2013) 3) How Cybernetics Was Born [Author] Norbert Wiener [Translator] Yasuo Shizume, Misuzu Shobo (1956) Using the above as references and hints, we have organized the technology for measuring and utilizing "nonlinear effects" in ultrasonic propagation phenomena according to the "Constructal Law," which aims to improve flow, culminating in ultrasonic cleaning technology.

• pump
• Drainage and ventilation equipment
• others

Ultrasonic cleaning system that achieves ultrasonic control tailored to the purpose.

This is an effective device using a dedicated ultrasonic tank (original manufacturing method). Due to the high efficiency of ultrasonic utilization, standard tanks lack sufficient strength and durability. Depending on the target and purpose, multiple ultrasonic waves and a degassing fine bubble generation liquid circulation device are controlled based on sound pressure measurement analysis for cleaning, stirring, and surface modification. We propose various combinations and usage (control) methods. The key point is to achieve an ultrasonic propagation state tailored to the target, focusing on the "dissolved oxygen concentration distribution" and "liquid circulation" within the dedicated tank. << Degassing Fine Bubble (Microbubble) Generation Liquid Circulation Device >> 1) By narrowing the suction side of the pump, cavitation is generated. 2) Cavitation causes bubbles of dissolved gases to form. The above describes the state of the degassing liquid circulation device. 3) As the concentration of dissolved gases decreases, the bubble size of dissolved gases due to cavitation becomes smaller. 4) Through appropriate liquid circulation, fine bubbles (microbubbles) smaller than 20μ are generated. The above describes the state of the degassing microbubble generation liquid circulation device.

• Other measuring instruments
• Scientific Calculation and Simulation Software
• others

Optimization technology for ultrasonic cleaning machines

(Development of a control system based on measurement and analysis of ultrasonic cleaning machines) The Ultrasonic System Research Institute has developed a technology that applies techniques for measuring and analyzing the state of ultrasonic cleaning machines, which propagate through the liquid, to set and control the state of ultrasonic cleaning machines according to specific purposes, taking into account the effects of tank structure, strength, manufacturing conditions, and liquid circulation state. This technology analyzes and evaluates the dynamic characteristics of complex ultrasonic vibrations (Note 1) in relation to various factors, allowing for the setting of cavitation and acceleration effects according to specific objectives through the configuration of circulation pump settings (Note 2). Note 1: This utilizes the original technology of the Ultrasonic System Research Institute, which employs "ultrasonic oscillation control" technology that considers "timbre." Note 2: The know-how involves settings related to the relationships between the cleaning machine, cleaning solution, and air at their respective boundaries. It can also be applied to cleaning tanks that do not have an overflow structure. Regarding the self-organization of micro-flows, control of acoustic flow has been made possible through degassing, aeration, ultrasound, and elastic wave dynamics on the tank surface.

• pump
• Other analytical equipment
• others

Dynamic Liquid Circulation System of Ultrasonic Cleaners - Acoustic Flow Control

(Development of a control system based on measurement and analysis of ultrasonic cleaning machines) The Ultrasonic System Research Institute has developed a technology that applies techniques for measuring and analyzing the state of ultrasonic cleaning machines propagating in liquid, to set and control the state of ultrasonic cleaning machines according to the effects of tank structure, strength, manufacturing conditions, and liquid circulation state. This technology analyzes and evaluates the dynamic characteristics of complex ultrasonic vibrations (Note 1) in relation to various factors, allowing for the setting of cavitation and acceleration effects according to specific purposes through the configuration of circulation pump settings (Note 2). Note 1: This utilizes the original technology of the Ultrasonic System Research Institute, which employs "ultrasonic oscillation control" technology considering "timbre." Note 2: The know-how involves settings related to the relationships at the boundaries of the cleaning machine, cleaning liquid, and air. It can also be applied to cleaning tanks that do not have an overflow structure. Regarding the self-organization of micro-flows, control of acoustic flow has become possible through degassing, aeration, ultrasound, and elastic waves on the tank surface.

• pump
• Other analytical equipment
• others

Evaluation technology for ultrasonic propagation conditions based on the measurement and analysis of sound pressure data.

The Ultrasonic System Research Institute has developed a completely new dynamic control technology for ultrasound by utilizing two function generators. This technology enables the control of nonlinear ultrasonic phenomena through oscillation (sweep) with two different waveforms. Note: Nonlinear (resonance) phenomena By generating higher harmonics (above the 10th order) through original oscillation control and resonating with low-frequency vibration phenomena, the generation of high-amplitude harmonics has been achieved, resulting in nonlinear (resonance) phenomena of ultrasonic vibrations. By optimizing the ultrasonic propagation characteristics of various components according to their intended purpose, efficient ultrasonic oscillation control becomes possible. Through the measurement and analysis of sound pressure data from ultrasonic testers, this system technology allows for the dynamic control of surface elastic wave changes according to the intended use. Ultrasonic propagation characteristics: 1) Detection of vibration modes (changes in autocorrelation) 2) Detection of nonlinear phenomena (changes in bispectrum) 3) Detection of response characteristics (analysis of impulse response) 4) Detection of interactions (analysis of power contribution rates)

• Vibration and Sound Level Meter
• Scientific Calculation and Simulation Software
• others

Proposal for a cleaning method optimized with fine bubbles and megahertz ultrasonic waves.

The Ultrasonic System Research Institute conducts improvements to ultrasonic cleaning machines (consulting available) using original products: ultrasonic systems (sound pressure measurement analysis, oscillation control). For the current ultrasonic cleaning machines, we propose and implement improvement methods based on sound pressure measurement and analysis. Specifically, we will discuss the level of improvement through measurement and verification of ultrasonic cleaning machines using our original product: Ultrasonic Tester NA (recommended type), which allows for easy measurement and analysis of ultrasonic waves. Depending on the level of improvement, we will suggest the use of our original product: Ultrasonic Oscillation System (1 MHz, 20 MHz), which allows for easy control of ultrasonic oscillation. Based on the conditions of the water tank, cleaning solution, items to be cleaned, and cleaning level, we will propose a degassing fine bubble generation liquid circulation device. Ultrasonic propagation characteristics: 1) Detection of vibration modes (changes in self-correlation) 2) Detection of nonlinear phenomena (changes in bispectrum) 3) Detection of response characteristics (analysis of impulse response) 4) Detection of interactions (analysis of power contribution rates)

• Non-destructive testing
• Scientific Calculation and Simulation Software
• others

Are you making progress on measures for the "2024 Problem"? The management of drivers' working hours is becoming stricter, and in the logistics field, reducing "waiting time for loading" has become an urgent issue. To address this challenge, our company, Hotron, proposes the "Vehicle Detection Ultrasonic Sensor 'HM-UX2'," which instantly grasps the availability of loading bays. The 'HM-UX2' contributes to the resolution of waiting times by accurately understanding the availability status, reducing unnecessary waiting and queuing, and shortening waiting times, thereby alleviating the burden on drivers! By replacing the "eyes" of your loading bay management with this high-precision sensor, why not start taking measures against the "2024 Problem"? Take a look at the product features: "Can it accurately detect availability?" "Can we really use it in our company?" "I just want to know the cost, even if it's an estimate." If you have any questions or requests, please feel free to consult us first.

We sincerely apologize for the inconvenience, but we will be closed for summer vacation during the following period. Closure period: August 9 (Saturday) to August 17 (Sunday), 2025 Inquiries received during this period will be addressed sequentially starting from August 18 (Monday). We appreciate your understanding and cooperation.

Thank you very much for visiting our booth at the "High-Performance Materials Week [Osaka] 13th High-Performance Plastics Exhibition." Thanks to you, we had many visitors and were able to conclude the event successfully. In addition to the "PPLB-445" displayed on the day, we have a variety of products available. For those who were unable to measure samples at the venue, we offer a trial measurement service. Furthermore, for those who would like to know more about our products and services, we also accept online meetings. We welcome inquiries from those who attended as well as those who could not make it this time due to scheduling conflicts. Please feel free to contact us.

Aioi System is pleased to announce the release of the low-power wireless display "NW2991-JP," which achieves long battery life. This product supports 920MHz band wireless communication and can be operated in conjunction with wired displays. It can be easily integrated into existing systems by simply adding a master unit. With a high-speed response time of under one second and a variety of display functions for text and barcodes, it supports a wide range of applications. ▼ For more details, please see the press release linked below ▼ ■ Main Features - Maintenance-free design with a battery life of one year (low power consumption) - Compatible with mixed operation with wired displays - High-speed response (under one second) and diverse display formats - Stable communication in the 920MHz band ■ You can see the actual product at the exhibition This product will be displayed at the TOPPAN booth during the International Logistics Comprehensive Exhibition 2025, 4th INNOVATION EXPO. We invite you to visit the venue, see the actual product, and experience its performance. Dates: September 10 (Wed) - 12 (Fri), 2025 Venue: Tokyo Big Sight (Halls 4-8) Booth No: 5-907 (TOPPAN booth) Exhibition official website ▶ linked below We sincerely look forward to your visit.

Thank you very much for visiting our booth at the "Monozukuri World (Measurement, Inspection, and Sensor Exhibition) 2025." Thanks to you, we had many visitors, and the event concluded successfully. In addition to the "PPLB-445" showcased on the day, we have a variety of products available. For those who were unable to conduct sample measurements at the venue, we offer a trial measurement service. Furthermore, for those who would like to learn more about our products and services, we also accept online meetings. We welcome inquiries from those who attended, as well as those who were unable to come this time due to scheduling conflicts. Please feel free to reach out to us.