パトライト List of Products and Services

We will introduce a case study of improvements in the FA (Factory Automation) field proposed by Patlite. The manufacturing site faced issues where handwritten equipment operation records led to omissions in maintenance records during short stops at night. This resulted in significant losses due to the time and effort required to identify lots during the outflow of defective products. In response, we proposed the wireless data communication system "AirGRID WD type." With automatic recording, omissions and gaps in information have been eliminated, leading to a reduction in losses. 【Case Study】 ■ Before Implementation - Handwritten equipment operation records led to omissions in maintenance records during short stops at night. - Identifying lots during the outflow of defective products required significant time and effort, resulting in substantial losses. ■ After Implementation - Automatic recording eliminated omissions and gaps in information, reducing losses. - Additionally, trends from more frequent short stops became visible, allowing for the prevention of major stops in advance. *For more details, please refer to the PDF materials or feel free to contact us.

• Safety and consumables
• Security Sensor Systems

We will introduce a case study of improvements in FA (Factory Automation) sites proposed by Patlite. With the automation of equipment leading to unmanned operations, manufacturing sites faced the problem of not being able to immediately notice equipment abnormalities, especially in isolated rooms (independent floors, etc.). To address this, we introduced the "WD Series," which collects operational information via wireless + LAN. This allowed simultaneous monitoring of each device from the office within the unmanned room, and with the email notification feature, we successfully established a comprehensive checking system. 【Case Study】 ■ Site Issues - Unable to immediately notice equipment abnormalities due to unmanned automation - Lack of understanding of operational information (current status + daily reflections) - Limited budget due to individual floors (outside the main floor) ■ Implementation Effects - Immediate access to desired information contributed to reducing losses - Even with an increase in unmanned individual floors, adding systems became easy, and based on the results already implemented, additional approvals became possible, successfully reducing investment risks. *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables
• Security Sensor Systems

We will introduce a case study of improvements in FA (Factory Automation) sites proposed by Patlite. In a manufacturing site where the status of the inspection station was not understood, it was not possible to call the manager, resulting in unnecessary labor costs. Therefore, the layered information display light "LA6-POE" was introduced. As a result, the status of the inspection station could now be determined solely by the equipment, leading to quicker responses to abnormalities at the inspection station and improved work efficiency. 【Case Study】 ■ Before Implementation - The status of the inspection station was not understood, making it impossible to call the manager and resulting in unnecessary labor costs. ■ After Implementation - The status of the inspection station could now be determined solely by the equipment. - Responses to abnormalities at the inspection station became quicker, improving work efficiency. *For more details, please refer to the PDF materials or feel free to contact us. https://www.patlite.co.jp/ ↓↓↓ Official Online Shop ↓↓↓

• Safety and consumables

We will introduce a case study of improvements in FA (Factory Automation) sites proposed by Patlite. Due to errors in the casting equipment, the machine stopped, causing a drop in internal temperature and leading to defective products. However, there was a problem in that the downtime could not be grasped on-site, making it impossible to confirm the number of defective products. Therefore, the layered information display light "LA6" was introduced. Upon receiving a signal of an abnormal occurrence, the "LA6" displays the downtime as a timer. By increasing the red timer lights in stages from 1 to 5 every minute, it became possible to confirm the downtime from a distance by the number of lit segments. [Case Study] ■ Current Situation - The equipment that experienced an abnormal stop was timed by the person in charge to identify the number of defective products. - Downtime could not be grasped on-site, making it impossible to confirm the number of defective products. ■ Proposal - With the timer display function, the number of displays increases every minute from the occurrence of an abnormality, allowing the downtime to be confirmed from a distance by the number of lit segments. - Wiring is easy with just one additional wire along with the conventional signal light. - Display time, display color (21 colors), and patterns (15) can be changed using editing software. *For more details, please refer to the PDF document or feel free to contact us. https://www.patlite.co.jp/

• Safety and consumables

We will introduce a case study of improvements in the FA field proposed by Patlite. Inspections were conducted on the parts manufacturing line before shipment. Due to the rush of the operators during the inspection process, the inspections were neglected, leading to the outflow of defective products. To address this, we introduced the layered information display light "LA6." By using the smart mode "Time Trigger Type" as a timer, we managed the time for the inspection process, establishing a system to start the inspection of the next product after a set period. [Case Study] ■ Improvement Issue - We want to eliminate the shipment of defective products. ■ Proposal - By using the smart mode "Time Trigger Type," we utilize the display light as a timer. - Conduct inspections of one product during the timer display. - When the blue light is fully lit, the inspection is complete, and we proceed to the next product inspection. *For more details, please refer to the PDF materials or feel free to contact us. https://www.patlite.co.jp/ ↓↓↓ Official Online Shop ↓↓↓

• Safety and consumables

We will introduce a case study of improvement in the FA (Factory Automation) field proposed by Patlite. A car parts supplier, Company A, faced the issue of taking too much time to check the machine's status (operating/stopped/materials running out, etc.). We proposed our wireless signal tower Andon. By transmitting machine information via the wireless control unit "PWS" and displaying it on the Andon, we resolved the issue. Additionally, there was a concern that it was difficult to get the attention of leaders or other personnel when needed, which caused work to stop and reduced productivity. By displaying information on the Andon when personnel needed to be called, we improved visibility and allowed for a quicker grasp of the situation on the shop floor. 【Case Study】 ■ Before Implementation - It took time to check the machine's status (operating/stopped/materials running out), so we wanted to understand the status of each machine at a glance. - It was difficult to get the attention of leaders or other personnel when needed on the work floor, leading to delays. ■ After Implementation - When personnel need to be called to the site, a switch is pressed to display that signal on the Andon. - Visibility has improved, allowing for a quicker understanding of the situation on the shop floor. *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

We will introduce a case study of improvements in FA (Factory Automation) sites proposed by Patlite. There was no guideline for opening and closing doors, which sometimes led to them being left open during the transportation of goods or when multiple people were passing through. Since foreign object contamination can be a fatal incident for food factories, we implemented the layered information display light "LA6" as a countermeasure. By enabling passersby and those around to unconsciously recognize the opening and closing of the door, we were able to respond quickly to issues such as forgetting to close the door or leaving a gap. 【Case Study】 ■ Improvement Issues - The time the door is open is left to the awareness of passersby. - Without guidelines, it is difficult to enforce any rules created. - Foreign object contamination poses a critical risk. ■ Proposal - Easily visualize the door opening and closing time with "LA6." - Management of the previously neglected time has become simple. - With LA6, it is easy to notice and respond immediately if the door is left ajar, forgotten to be closed, or if something is caught in it. *For more details, please refer to the PDF document or feel free to contact us. https://www.patlite.co.jp/

• Safety and consumables

We will introduce a case study of improvements in FA (Factory Automation) sites proposed by Patlite. In a manufacturing site where it was difficult to provide accurate work instructions, quality issues arose, and work efficiency became a problem. There were frequent accidents involving foreign workers. In response, we proposed an MP3 playback notification device that can record multiple languages, including English, Korean, and Chinese. After implementation, we were able to convey work instructions accurately, reducing mistakes and improving work efficiency. This also led to a reduction in accidents. 【Case Study】 ■ Issues - Inability to provide accurate work instructions, leading to quality issues and poor work efficiency. - Frequent accidents in workplaces with foreign workers. ■ Proposal - We will ship the MP3 playback notification device with recordings in various languages. - Supported languages (English, Korean, Chinese, German, Spanish, Portuguese, etc.) *For more details, please refer to the PDF materials or feel free to contact us. https://www.patlite.co.jp/ ↓↓↓ Official Online Shop ↓↓↓

• Safety and consumables

We will introduce a case study of improvements in the FA (Factory Automation) field proposed by Patlite. Even with log recording using torque management software, it was not possible to continuously monitor the PC screen, leading to situations where issues went unnoticed until product shipment, resulting in the outflow of defective products. We proposed PC recording via LAN and the network display light "NH Series." When an abnormal value occurs, the "NH Series" lights up in both the production area and the office, allowing operators to recognize the issue, which has eliminated the outflow of defective products. 【Case Study】 ■ Improvement Issues - Log recording with torque management software, but issues go unnoticed until product shipment - Occurrence of defective product outflow ■ Improvement Effects - Notification to both the production area and the office when an abnormal value occurs - Operators can now recognize issues, eliminating the outflow of defective products *For more details, please refer to the PDF materials or feel free to contact us. https://www.patlite.co.jp/ ↓↓↓ Official Online Shop ↓↓↓

• Safety and consumables

We will introduce a case study of improvements in FA (Factory Automation) sites proposed by Patlite. Even if an emergency occurs in a distant location, by implementing our wireless control unit "PWS," it becomes possible to respond quickly. In a case where a chemical leak occurred on the manufacturing line, when the cleaning shower is activated, the contact output linked to the shower turns ON. This wirelessly notifies the office located in a separate building about the chemical leak. In this way, it has become possible to monitor the situation at each site from the office, enabling smooth responses to troubles in distant locations. 【Case Study】 ■ Benefits of Implementation - Low construction costs with wireless technology - Establishment of a notification system to a separate building using multi-hop functionality - Location identification with 5 output contacts (receiver) *For more details, please refer to the PDF materials or feel free to contact us. https://www.patlite.co.jp/ ↓↓↓ Official Online Shop ↓↓↓

• Safety and consumables

We will introduce a case study of improvements in the FA field proposed by Patlite. There were many molding machines on-site, and it took time to identify the abnormal occurrence devices. We introduced the wireless control unit "PWS" and the battery-operated flash display light "PFH" to the manufacturing site. When a line anomaly is detected, the "PFH" is temporarily installed as a marker, and the on-site operator contacts the maintenance personnel in the office via wireless communication. The color of the display light indicates which line has the anomaly. 【Case Study】 ■ Improvement Proposal - Report line anomalies to the manufacturing office via wireless communication - Easily set up markers with a display light that can be attached with magnets *For more details, please refer to the PDF document or feel free to contact us. https://www.patlite.co.jp/ ↓↓↓ Official Online Shop ↓↓↓

• Safety and consumables

We will introduce a case study of improvements in FA (Factory Automation) sites proposed by Patlite. By implementing our wireless control unit "PWS" and the layered information display light "LA6," it is possible to wirelessly notify the office of abnormal outputs (contact signals) from the compressor. This allows for the notification of pressure drops in compressors, which are often difficult to notice, thereby reducing production losses. 【Case Study】 ■ Benefits of Implementation - The elapsed time since the occurrence of an abnormality is immediately visible. - The layered information display light can be easily configured with free editing software. - Notifications via voice using a voice synthesis rotating light. - Reduction of production losses. *For more details, please refer to the PDF document or feel free to contact us. https://www.patlite.co.jp/ ↓↓↓ Official Online Shop ↓↓↓

• Safety and consumables

We will introduce a case study of improvements in FA (Factory Automation) sites proposed by Patlite. In a factory where it was impossible to grasp the consumption status of parts from the warehouse, leading to equipment stoppages due to parts shortages, we introduced our wireless control unit "PWS" and the stackable information display light "LA6." The "LA6" displays the replenishment timing for each part. When we want to call someone to the site, we press a switch, and that signal is displayed on the Andon. This enhances visibility and allows us to quickly grasp the situation on the shop floor. [Case Study] ■ Benefits of Implementation - Wireless transmission of start-up signals - Display of replenishment timing for each part using "LA6" - "LA6" allows individual settings for lighting time and lighting patterns via software - Enables smooth replenishment starting from parts that deplete quickly *For more details, please refer to the PDF materials or feel free to contact us. https://www.patlite.co.jp/ ↓↓↓ Official Online Shop ↓↓↓

• Safety and consumables

We will introduce a case study of improvements in FA (Factory Automation) sites proposed by Patlite. By introducing our wireless control unit "PWS series" and the stacked information display light "LR6," it becomes easy to visualize information even in scenes where access is difficult, such as clean rooms. Operational information from devices within the factory can be transmitted and mirrored in the office. Furthermore, by incorporating the wireless data communication "WD series," operational information can also be collected. By processing CSV files, visualization can be achieved in various ways. 【Case Study】 ■ Benefits of Implementation - Ability to mirror equipment in the office - Collection of operational information by incorporating the "WD series" - Easy visualization even in scenes where access is difficult, such as clean rooms *For more details, please refer to the PDF materials or feel free to contact us.

• Safety and consumables

We will introduce a case study of improvements in FA (Factory Automation) sites proposed by Patlite. To improve operational efficiency, we implemented our layered information display light "LA6" in a manufacturing site that was working on reducing equipment maintenance time. With the time trigger function, the display increases every 10 minutes from the occurrence of an abnormality, showing the elapsed time until recovery. This has been utilized for the maintenance personnel's decision-making, leading to improved production efficiency. 【Case Study】 ■ Current Situation - Efforts to shorten equipment maintenance time to improve operational efficiency - The elapsed time until recovery was handwritten, leading to omissions and extra work, increasing the burden of recording ■ Implementation Effects - Visualization of the elapsed time since the occurrence of an abnormality - By maintaining equipment with prolonged recovery times - We were able to improve production efficiency *For more details, please refer to the PDF document or feel free to contact us. https://www.patlite.co.jp/ ↓↓↓ Official Online Shop ↓↓↓

• Safety and consumables

We will introduce a case study of improvements in FA (Factory Automation) sites proposed by Patlite. In manufacturing sites where multiple machines stopped simultaneously or when processing was completed, operators were conducting recovery work based on their judgment, leading to challenges such as not knowing the priority and resulting in longer downtime. To address this, we introduced our layered information display light "LA6." This allows for a quick visual confirmation of the elapsed time since the stoppage, enabling immediate priority assessment. 【Case Study】 ■ Improvement Issues - Longer stoppage times lead to production losses. - Initial actions are delayed as they require checking the operation panel, resulting in extended downtime. ■ Implementation Effects - Quick visual confirmation of elapsed time after stoppage. - Immediate priority assessment reduces non-operational losses. - Display of remaining processing time improves setup efficiency. - Improved pathways to check the operation panel. *For more details, please refer to the PDF document or feel free to contact us. https://www.patlite.co.jp/solutions/detail.php?AutoID=37 ↓↓↓ Official Online Shop ↓↓↓

• Safety and consumables

Here is an introduction to a case study of improvements in FA (Factory Automation) sites proposed by Patlite. In manufacturing sites where the color settings for important errors differ by factory, there was a challenge of not understanding the meaning of displays when visiting other factories. We introduced our layered information display lights. By standardizing the display colors of signal towers across the company, we contributed to improved productivity. 【Case Study】 ■ Improvement Issues - Color settings for important errors differ by factory - The meaning of displays is unclear when visiting other factories ■ Proposal Details - Various displays can be set according to errors using the dedicated data creation application "EDITOR for LA series" - Changes to signal colors after implementation can be quickly addressed with the app *For more details, please refer to the PDF materials or feel free to contact us. https://www.patlite.co.jp/ ↓↓↓ Official Online Shop ↓↓↓

• Safety and consumables

We will introduce a case study of improvements in FA (Factory Automation) sites proposed by Patlite. Due to instantaneous voltage drops, peripheral devices malfunctioned, and without noticing it, they were left unattended, resulting in significant losses in the manufacturing site. We proposed visualizing abnormal devices. By introducing our stacked information display light "LA6," we can identify and notify about abnormal devices caused by voltage drops, thereby preventing the expansion of damage. In addition to enabling prompt responses, if there were instances where issues could not be addressed, such as during nighttime shutdowns, it also allows for back-calculating when the issue occurred based on the elapsed time. 【Case Study】 ■ Improvement Issues - Due to instantaneous voltage drops, some devices frequently stop, and leaving them unattended leads to expanded damage. ■ Proposal Content - Identify and notify about abnormal devices caused by voltage drops using "LA6" to prevent the expansion of damage. - Display when device abnormalities occurred in tact time, making it easy to understand the elapsed time. *For more details, please refer to the PDF materials or feel free to contact us. https://www.patlite.co.jp/ ↓↓↓ Official Online Shop ↓↓↓

• Safety and consumables

We will introduce a case study of improvements in the FA field proposed by Patlite. In a production site that faced the challenge of "being unable to grasp the elapsed time since an abnormal occurrence" despite having established mirroring between the site and the office using PWS, we introduced our layered information display light. This enabled visualization of the elapsed time since an error occurred, contributing to increased productivity efficiency. 【Case Study】 ■ Improvement Theme - Unable to grasp the elapsed time since an abnormal occurrence ■ Proposal Details - Using the dedicated data creation application software "EDITOR for LA series," freely set display patterns according to the elapsed time - Freely set the abnormal level for each error in the display pattern *For more details, please refer to the PDF materials or feel free to contact us. https://www.patlite.co.jp/ ↓↓↓ Official Online Shop ↓↓↓

• Safety and consumables

We will introduce a case study of improvements in FA (Factory Automation) sites proposed by Patlite. In a production site where there were few people, daily report management and aggregation of equipment operating status were done manually. We introduced our "Signal Tower with Switch Box" to the production site. By semi-automating the aggregation, it became possible to collect more accurate data. Visualizing it over time clarified the improvement measures, leading to increased productivity. This device can be easily introduced without modifying existing equipment, making it recommended for improving older equipment and manual processes. 【Case Study】 ■ Purpose of Introduction - To simply collect the operating status of equipment where it is difficult to install IoT devices and signal lights. ■ Effects of Introduction - It became possible to collect more accurate data. - Visualization over time clarified improvement measures. - Increased productivity. *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

The network monitoring indicator "SignalTower NH Series" visualizes network failures and alert information through "light," "sound," and "email." The NH Series has undergone significant improvements, with its "design," "function," "application," and "support" being reborn in a new and innovative way! The sophisticated new design features a simple color scheme based on off-white and a design that emphasizes gentle curves, harmonizing with interiors and other devices. In April 2018, the NHP (φ40mm) and NHL (φ60mm) had their indicator parts changed to the LR series and were newly released as NHP-FB2 and NHL-FB2. The NHS-FB1 continues to be sold. Additionally, you can order the number of indicator lights to match your operational needs from a wide variety of options. We also provide brackets that make it easy to install on walls and partitions, allowing for a flexible layout that suits your operations. *For more details, please download the catalog.

• Other security systems

【Interface Converter NBM-D88】 Flexibly controls network status monitoring. *Evaluation equipment available for loan ■Monitoring Functions ・PING monitoring ・Trap reception function ・Application monitoring ■Command Transmission ・RSH command transmission ・SNMP trap transmission ・SOCKET transmission ・Up to 8 email transmissions ■Command Control ・Controllable via RSH ・SOCKET communication ■Input/Output ・8 digital inputs ・8 digital outputs Product Page https://www.patlite.co.jp/product/detail0000000554.html *For more details, please download the catalog or feel free to contact us. *If you wish to borrow evaluation equipment, please apply via the link below. https://www.patlite.co.jp/rental/ ↓↓↓ Official Online Shop ↓↓↓

• Special lighting
• Safety and consumables

The "LA6-POE" is a display light that visualizes time, remaining quantity, and abnormal conditions, enabling remote monitoring to reduce all losses during work. It is equipped with an operating program that allows for free customization of light colors and operating modes. It visualizes abnormal levels and progress status through various operations. Additionally, the operating modes can be easily edited with dedicated software. 【Features】 ■ Expresses abnormal levels with a variety of "light colors" ■ Visualizes progress status with diverse "operating modes" ■ Easily visualizes progress status with a simple "dedicated data creation application software" *For more details, please refer to the PDF materials or feel free to contact us. *If you wish to borrow evaluation equipment, please apply through the link below. https://www.patlite.co.jp/rental/ ↓↓↓ Official Online Shop ↓↓↓

• others
• Safety and consumables

High-quality audio synthesis notifier using MP3 Compact and loud. Messages can be changed using an SD card. 【Features】 ● Loud volume of up to 87dB at 1m ● Protection rating of IP54 ● Compliant with European RoHS directive, using lead-free solder ● Conforms to CE standards ● Front panel can be selected according to preference ● High-quality MP3 audio synthesis ● Easy operation with front switch, volume, and card slot ● Compatible with NPN transistor open collector ● Designed for embedded use only □■□ For more details, please request documentation or download the catalog □■□

• Other store equipment and supplies

High-quality audio synthesis notifier using MP3 Plays messages at a loud volume of 95dB (at 1m) 【Features】 ● Designed for embedded use only. ● Compact yet capable of a maximum volume of 95dB (at 1m). ● Volume can be adjusted using the knob on the front of the unit. ● Messages can be changed on-site using an SD card. ● Complies with the environmentally friendly European RoHS directive. ● Various playback modes allow for settings tailored to specific applications. ● Compatible with NPN transistor open collector. ● Complies with EC directives and displays CE marking (only for BKV-31JF). ● Available in two colors to suit embedded devices. ● Protection rating of IP54 (only the front when mounted in the correct orientation). ● Messages can be specified from over 3,000 standard messages at no charge. □■□ For more details, please request documentation or download the catalog □■□

• Other store equipment and supplies

This is an interface converter that supports a wide range of protocols. 【Features】 ● Equipped with 8 channels of digital input Supports voltage-free contact output and voltage output contacts. ● Equipped with 8 channels of digital output Relay output allows for driving loads of DC 24V and AC 100V. ● All terminal blocks are screw-less compatible Wiring to the terminal block can be done with a single touch (no crimping tools required). ● SNMP (Simple Network Management Protocol) compatible With SNMP support, monitoring and operation from a manager is possible. ● Remote shell command support Easily control external connected devices remotely with RSH commands that are OS-independent. ● PING function for line and device status monitoring PING is used for monitoring line failures and device status. ● Email sending function included Can send emails to pre-set email addresses for each input. □■□ For more details, please request documentation or download the catalog. □■□

• others

You can control devices via relay over the network. 【Features】 ● Control of electrical products and more can be performed over Ethernet. ● Independent 8-point non-voltage contact output. ● Uses screwless terminals for easy connection, with a contact capacity of 3A (AC125V/DC30V). ● Supports automatic switching between 10base-T and 100base-TX. ● Equipped with a high-speed 32-bit RISC CPU. ● Comes with configuration utility software (PHN Manager) that allows IP address settings via the network. □■□ For more details, please request materials or download the catalog □■□

• others

LED Stacked Signal Light with MP3 Voice Synthesis Alarm LED Large Stacked Signal Light with Built-in Loud Horn 【Features】 ■ Colors... Red, Yellow, Green, Blue, White ■ Lens... Made of polycarbonate with excellent impact resistance and heat resistance ● Sufficient brightness considering installation at high places for large equipment ● Glove unit designed to minimize dust accumulation on the product surface ● Protection rating IP53, suitable for use in factories with moisture and dust ● Compatible with NPN open collector for direct driving with PLCs, etc. ● Complies with European RoHS directive, 24V version is CE marked ● Rich features including sound reduction function and message rewriting via SD card □■□ For more details, please request materials or download the catalog □■□

• others

An LED rotating light with built-in electronic sound that eliminates the need for maintenance due to burnt-out bulbs. It integrates a long-lasting, energy-efficient, and maintenance-free LED rotating light. The volume reaches a maximum of 90dB (at 1m), and it features an adjustable volume knob. You can choose to operate the sound and rotating light simultaneously or use the rotating light alone. The test switch makes the setup process easier during installation. Product page: https://www.patlite.co.jp/product/detail0000000323.html ↓↓↓ Official online shop ↓↓↓

• LED light source/module

An MP3-based voice synthesis system that plays clear messages, combined with an LED light source for a long lifespan, energy efficiency, and maintenance-free operation. It features a maximum volume of 95dB (at 1m) and allows for volume adjustment using the built-in volume control knob. You can operate the sound and the rotating light simultaneously or use the rotating light alone. Changing messages is easy with an SD card. The test switch simplifies the setup process during installation.

• LED light source/module

The Airgrid WD-Z2 type is a system that wirelessly transmits equipment information simply by placing it on a Patlite signal light.

• Internet System

At vehicle entry and exit points of parking lots, there are many dangers such as accidents involving pedestrians and collisions between vehicles. Patlite proposes a "Parking Sensor System" that alerts the surroundings with sound and light.

• Car and bicycle parking facilities
• Car and bicycle parking facilities
• Parking lot facility construction

Slim body with 32 sounds! This embedded type electronic sound notifier incorporates 32 sounds in one unit. It achieves clear sound quality with a sound pressure of 95dB in a slim body. Easy operation with front switches, volume control, and card slot. Volume adjustment can be done from the front of the unit. By relocating the switch from the back to the front, operation from the installation surface has become possible, improving usability. Product page https://www.patlite.co.jp/product/detail0000000002.html ↓↓↓ Official online shop ↓↓↓

• Car and bicycle parking facilities
• Other store equipment and supplies
• Other security systems

Compact body with 32 sounds! This embedded type electronic sound notifier incorporates 32 tones in one unit. It achieves clear sound quality with a sound pressure of 90dB in a small body. Easy operation with front switch, volume control, and card slot. Volume adjustment can be done from the front of the unit. By relocating the switch, which was traditionally on the back, to the front, it has improved operability from the installation surface. Product page http://www.patlite.co.jp/product/detail0000000604.html ↓↓↓ Official online shop ↓↓↓

• Car and bicycle parking facilities
• Other store equipment and supplies
• Other security systems

The MP3 voice synthesis notifier and electronic sound notifier "LKEH" is a voice synthesis and electronic sound notifier with a built-in horn that emits a loud volume. It comes with an LED stacked signal light that is easily visible from a distance. For more details, please download the catalog or contact us. Product page https://www.patlite.co.jp/product/detail0000000215.html ↓↓↓ Official online shop ↓↓↓

• Other store equipment and supplies

The MP3 playback notifier "BSV" is an MP3 playback notifier with a space-saving design that corresponds to the miniaturization of devices, measuring the industry's thinnest at 19.9mm (as of January 2011, according to Patlite). Despite its slim profile, it features a loud volume of up to 87dB (at 1m), and installation and removal, as well as volume adjustment, can be done from the front, significantly reducing installation and maintenance labor. Additionally, it is equipped with a function to reduce sound through signal input switching, and messages can be rewritten using an SD card. You can specify from over 3,000 standard messages for free (other custom messages will incur additional costs). For more details, please download the catalog. Product page https://www.patlite.co.jp/product/detail0000000318.html ↓↓↓ Official online shop ↓↓↓

• Alarm panel

The LED lighting work light "CLA" is a popular type that has achieved a protection rating of 'IP69K', making it suitable for high-pressure hot water cleaning in food processing factories. It can also be used as lighting for electric vehicle charging station control panels and as a replacement for various other types of lighting. It realizes over 30% brightness compared to conventional products and keeps the product's heat generation temperature below 40 degrees (34% reduction compared to a 20W equivalent fluorescent lamp), thereby reducing the burden on the installation environment. It is available in seven sizes (100 to 1500mm), three colors (daylight, cool white, yellow), and four types of mounting options including magnetic installation, making it suitable for various scenes. For more details, please download the catalog.

• Fluorescent Light Type

The LED lighting "CLE" uses high-brightness LEDs as the light source, ensuring a brightness of 130cd (CLE-24N) while achieving energy-saving power consumption of approximately 3W. The illuminated area has a diameter of 300mm at a distance of 0.5m. Additionally, it is designed to minimize heat and noise generation. By using reinforced glass for the surface lens, it is strong against impacts and reduces the deterioration of transparency over time. It features a robust aluminum body and has a protective structure of IP65F, making it suitable for use in environments with water, oil, and dust. For more details, please download the catalog.

• Fluorescent Light Type

The network monitoring indicator "SignalTower NH Series" visualizes network failures and notification information through "light," "sound," and "email." The NH Series has undergone significant improvements, with its "design," "function," "application," and "support" being reborn in a new and innovative way! The sophisticated new design features a simple color scheme based on off-white and a design that emphasizes gentle curves, harmonizing with interiors and other devices. In April 2018, the NHP (φ40mm) and NHL (φ60mm) had their indicator sections changed to the LR series and were newly released as NHP-FB2 and NHL-FB2. The NHS-FB1 continues to be sold. Additionally, you can order a variety of indicator levels tailored to your operations. We also offer brackets that make it easy to mount on walls or partitions, allowing for a flexible layout that suits your needs. For more details, please download the catalog.

• Other security systems

The dedicated command "PRSH" for SignalTower is a command program that adds unique command options from Patlite to the standard rsh command built into Microsoft Windows, making it easy to support operations using the network monitoring display light "NH series." While the standard rsh command implemented in the OS can be used to control the "NH series," if you want to further extend functionality or if the standard rsh command fails to control the display light due to issues, we recommend using PRSH. By utilizing the command options of PRSH, you can avoid the freezing phenomenon of the rsh command caused by simultaneous alerts and communication errors, search for other "NH series" devices on the network, and easily retrieve and save log information of the display lights that could previously only be checked on the web interface. For more details, please contact us.

• Other security systems
• Other Software

The interface converter "PHN-S" is a device that allows equipment not compatible with Ethernet to be connected to Ethernet. It supports RS-232C ⇔ Ethernet connections and can operate in "server mode," which responds to connection requests from Ethernet, or "client mode," which operates based on connection requests from the PHN-S. In multi-server mode and extended multi-server mode, it can monitor and control up to 8 network devices. Additionally, it uses a 32-bit RISC CPU and supports automatic switching between 10base-T and 100base-TX. For more details, please download the catalog.

• others

The LED stack signal light, Signal Tower LS7, is a smart and smooth-bodied LED stack signal light that enhances harmony with equipment. By giving the surface of the signal light body a smooth shape, it reduces the adhesion of water and dust. Additionally, the structure prevents the exposure of metal parts such as screws and shafts, allowing for safe use even in food processing lines with high moisture or in lithium-ion battery manufacturing processes. The outer lens structure is designed to reduce the risk of environmental stress cracking due to oil mist. The lens cover is made of impact-resistant polycarbonate. By measuring the environmental sound frequency of cutting machines and alternating between the frequency bands of 2000Hz and 3000Hz, it reliably conveys the buzzer sound to the operator from the machine's startup to high-speed processing. For more details, please contact us or refer to the catalog.

• Safety and consumables

The LED Ultra Slim Layered Signal Light Super Slim ME-A features an ultra-slim design with a prism-cut globe made of aluminum, which vividly diffuses the light source and enhances visibility. The aluminum body is resistant to rust and maintains its beauty over time, making it ideal for small devices. For more details, please contact us or refer to the catalog.

• Safety and consumables

The LED Ultra Slim Layered Signal Light Super Slim MP is an ultra-slim signal light with a lightweight resin body. Its unique prism structure and lens-cut glove vividly diffuse the light source, enhancing visibility. The body is made of lightweight ABS resin, maintaining its beauty over a long period. It is ideal for small devices and more. For more details, please contact us or refer to the catalog.

• Safety and consumables

The LED Ultra Slim Layered Signal Light Super Slim MPS is an ultra-slim signal light with a lightweight resin body. Its unique prism structure and lens-cut glove vividly diffuse the light source, enhancing visibility. The body is made of lightweight ABS resin, maintaining its beauty over time. It is ideal for small devices and more. For more details, please contact us or refer to the catalog.

• Safety and consumables