ジョブル List of Products and Services

The VE10DAL is a transmitter that outputs high-resolution VGA (analog RGB) at a maximum of 1920✕1200 60Hz and audio to 10 channels, capable of transmitting up to 300 meters for each channel using a single LAN cable. A separate number of receivers is required for transmission (the high-performance receiver VE02DALS is recommended).

• Other PCs and OA equipment

The VE01H transmits VGA (analog RGB) up to 70 meters using a LAN cable (CAT5e/6). It is a set that includes the VE01H-T (transmitter) and VE01H-R (receiver), along with a power adapter (for the transmitter). (The receiver does not require power.)

• Other PCs and OA equipment
• Other security systems
• others

The SP006PH is a surge protector that protects various transmission devices using PoE++ compatible 10/100/1000M network equipment and LAN cables from sudden voltage spikes caused by induced lightning and other sources. - Protects equipment from sudden voltage spikes caused by induced lightning and other sources - Compliant with IEEE 802.3af (PoE) / IEEE 802.3at (PoE Plus) / IEEE 802.3bt (PoE++) - Supports both Alternative A and Alternative B

• Lightning protection
• Other security systems
• others

Protects video equipment from surges transmitted through HDMI cables. - Protects devices from sudden voltage spikes caused by induced lightning, ESD, and EFT (impulse noise). - Compatible with HDMI 1.4. - Response time is less than 1 ns. *Be sure to attach a ground cable to the main unit for grounding (Type D grounding).

• Lightning protection
• Other security systems
• others

FO221xC.5BLxX transmits SD/HD/3G-SDI and RS485 signals over a single-mode optical fiber up to 20 km and over a multi-mode optical fiber up to 2 km. It transmits using a transmitter (FO2211C.5BLTX) and a receiver (FO2212C.5BLRX). The FO2212C.5BLRX (receiver) can output the SDI signal to two distribution outputs.

• Security cameras and surveillance systems
• Other security systems
• others

JVCF-005PH is a video converter that converts and outputs SDI signals to HDMI signals and composite signals. HDMI signals and composite signals can be output simultaneously.

• Security cameras and surveillance systems
• Other security systems
• others

The HLG-240H-54 is a DC54V 4.45A power adapter that supports IP67 and can be used outdoors. - It converts AC90-350V to DC54V. - It is a high-capacity power adapter with a rated power of 240.3W. - It supports IP67 and can be used outdoors. - It has various built-in protection circuits for safe use.

• DC Power Supply
• others

The H30-044-90 is an industrial unmanaged PoE switch. It supports PoE++ (IEEE802.3bt) and can provide power of up to 60W per port for 4 ports or up to 95W for 2 ports. Each port is compatible with gigabit speeds, making it ideal for PoE-enabled IP camera transmission systems that require high-speed communication and large power supply capacity.

• Other security systems
• others

The XT10-041-250 is a twisted pair cable transmission switch (4-port receiver) equipped with 4 RJ45 ports and 1 GbE port, supplying a total of 240W of power over twisted pair cables (such as LAN cables). Each RJ45 port transmits Ethernet and power to EPoT (Ethernet & Power over UTP/STP cable) transmitters (TX) located up to 1,200 meters away using CAT5e or higher UTP/STP cables (such as LAN cables).

• Security cameras and surveillance systems
• Other PCs and OA equipment
• others

The XC10-041-250 is a coaxial transmission switch (4-port receiver) for the EPoC series, equipped with 4 BNC ports and 1 GbE port, supplying a total of 240W of power over coaxial cables. Each BNC port transmits Ethernet and power to EPoC (Ethernet & Power over Coaxial) transmitters (TX) located up to 1,200 meters away via coaxial cables.

• Security cameras and surveillance systems
• Other commercial buildings and service facilities
• others

VAD-SD002A.L1.xxx.55 transmits two-channel control (serial) signals bidirectionally over single-mode optical fiber up to 20 km and over multi-mode optical fiber up to 3 km. The serial signals can use two channels of RS485 or one channel of RS422.

• Other security systems
• Security cameras and surveillance systems
• others

We would like to introduce the "HDMI-related devices" that we handle. We offer products such as the HDMI 4K compatible CAT5e long-distance transmitter "HE03-4K," the HDMI, infrared, and RS232C HDBaseT transmitter "HE02EIX," and the HDMI 1 input 4 output CAT5e transmitter "HE04SEK." 【Product Lineup】 ■ HDMI IP Transmitters ・HE03-4K ・HE03LR-4K ■ 4K 60Hz 4:4:4 compatible HDBaseT Transmitter: HE02EIX ■ Splitter: HE04SEK *For more details, please refer to the PDF document or feel free to contact us.

• Other security systems

The VAD-i120C.xx transmits one channel of composite video and two channels of analog audio signals over single-mode fiber optic cable up to 20 km and over multi-mode fiber optic cable up to 3 km. The signals are transmitted after digital conversion, ensuring there is no degradation in video/audio quality during transmission.

• Security cameras and surveillance systems

The JVCF-HS01 is a video converter that converts SDI signals and HDMI signals bidirectionally. - Bidirectional conversion between SDI signals and HDMI signals - Supports SD/HD/3G-SDI for SDI signals - Capable of 2-channel output for SDI signals - Automatically recognizes HDMI EDID information

• Security cameras and surveillance systems
• Other security systems
• others

VAD-PA022A.xxx.35 transmits two sets of serial signals and two sets of audio signals bidirectionally over single-mode optical fiber up to 20 km and over multi-mode optical fiber up to 3 km.

• Other PCs and OA equipment
• Other security systems

The VAD-i402A.xx.56 transmits 4 channels of composite video signals and 2 channels of control (serial) signals over single-mode optical fiber up to 20 km and over multi-mode optical fiber up to 3 km. The video is transmitted in a digital format, ensuring no degradation in image quality.

• Security cameras and surveillance systems
• Other security systems
• others

The VAD-i804A.xx.355R transmits 8 channels of composite video, 3 channels of serial signals, and 1 channel of contact signals over single-mode fiber optic up to 20 km and multi-mode fiber optic up to 2 km. The video is transmitted in a digital format, ensuring no degradation in image quality.

• Security cameras and surveillance systems
• Video Monitoring System
• others

The VAD-i800.xx transmits 8 channels of composite video signals over single-mode optical fiber up to 20 km and over multi-mode optical fiber up to 1 km. The video is transmitted after digital conversion, ensuring no degradation in image quality.

• Security cameras and surveillance systems
• Other security systems
• others

The VAD-i400.xx transmits four channels of composite video signals over single-mode fiber up to 20 km and multi-mode fiber up to 3 km. Since the video is digitally converted for transmission, there is no degradation in image quality.

• Security cameras and surveillance systems
• others
• Other security systems

The VAD-H404A.xx.355R transmits four channels of AHD/HD-TVI/HDCVI/composite video signals, RS232C + RS485 x 2 control (serial) signals, and one channel of contact signals over a single optical fiber for long-distance transmission up to 20 km. The video is transmitted in a digital format, ensuring no degradation in image quality.

• Security cameras and surveillance systems
• Other security systems
• others

The VAD-H102A.xx.35 transmits AHD/HD-TVI/HDCVI/composite video signals and RS232C + RS485 signals over a single fiber optic cable for distances of up to 20 km. The video is transmitted in digital format, ensuring no degradation in image quality. Additionally, it has a compact housing, making installation easy.

• Security cameras and surveillance systems
• Other security systems
• others

The VAD-H400.xx transmits four channels of AHD/HD-TVI/HDCVI/composite video signals over a single optical fiber for long distances of up to 20 km. The video is transmitted in a digital format, ensuring there is no degradation in image quality.

• Security cameras and surveillance systems
• Other security systems
• others

The VAD-NH100.xx transmits one channel of AHD/HD-TVI/HDCVI/composite video over a single optical fiber up to 20 km away. The video is transmitted in a digital format, ensuring no degradation in image quality. Additionally, its compact design makes installation easy.

• Security cameras and surveillance systems
• Other security systems
• others

The TTA111HDT is an active transmitter that transmits AHD/HD-TVI/HDCVI/composite video over twisted pair cables for long distances. - When combined with passive types such as TTP111HD, it can transmit AHD (1080p) up to 450m. - When combined with active types such as TTA111HDR, it can transmit AHD (1080p) up to 500m. *When using it in combination with active receivers like TTA111HDR, do not use UTP cables longer than 200m. Excessively amplified signals may cause video distortion.

• Security cameras and surveillance systems
• Other security systems
• others

Transmits 16 channels of AHD/HD-TVI/HDCVI/composite video over 4 LAN cables. The LAN cable connection supports both RJ45 and terminal blocks. It is ideal for transmitting a large number of videos at once, as it can convert 16 videos with a single device (4 videos can be transmitted per LAN cable). - Usable on both the transmitting and receiving sides - Can transmit up to 200m at AHD (1080p 30Hz) - 19-inch rack mount, 1U size - No power supply required

• Security cameras and surveillance systems

- Transmits 4 types of AHD/HD-TVI/HDCVI/composite video signals over a single LAN cable. - When using the "TTP414HD" transmitter/receiver, 1080p AHD can be transmitted up to 200m, and composite video (NTSC/PAL) can be transmitted up to 500m. - No power supply is required as it is a passive type. - It has built-in ESD/EFT and lightning surge protection features.

• Security cameras and surveillance systems
• Other security systems
• others

- Supports high-resolution analog HD video (AHD/HD-TVI) in 1080p/720p and composite video. - Automatically detects and displays composite video in NTSC and PAL formats. - Clear images with a high resolution of 800x480 on a 5-inch LCD. - Displays beautiful images with a 3D comb filter and 3D deinterlacing. - Built-in 2200mAh lithium-ion battery. - Uses long-lasting, low-power consumption LED backlight. - Bright and easy-to-read screen with a wide viewing angle and 350cd brightness. - DC12V power output available for camera supply (maximum 0.5A). - Equipped with audio input terminal and speaker. - Durable housing resistant to shock (standard rubber cover included).

• Security cameras and surveillance systems
• others

The AE01-T is an audio transmitter that transmits analog monaural audio signals over a single pair of UTP cables (CAT5e/6) for up to 600 meters. The connection with the UTP cable can be securely made at the terminal block. No external power supply is required for either the transmitting or receiving side. It comes as a set of two units, one for the transmitting side and one for the receiving side.

• Other PCs and OA equipment

AE02 is an audio transmitter that transmits analog stereo audio signals up to 600 meters using LAN cables (CAT5e/6). The LAN cable can be easily connected with an RJ45 connector. It can be used as both a transmitter and receiver, allowing each channel of stereo audio to be used separately, as well as for bidirectional transmission of mono audio. No external power supply is required. It comes as a set of two units, one for transmission and one for reception.

• Other PCs and OA equipment
• Other commercial buildings and service facilities
• others

The VAD-PA020C transmits two channels of audio signals over single-mode fiber optic cable up to 20 km and over multi-mode fiber optic cable up to 3 km. Audio can be transmitted in high quality due to digital conversion.

• Other security systems
• Other commercial buildings and service facilities
• others

- Transmits a single VGA (analog RGB) signal up to 10 km using one single-mode fiber. - For multi-mode fiber, transmission is possible up to 1 km. - Transmission is done with a transmitter (FV5220C.LTX) and a receiver (FV2502C.LRX). - Long-distance transmission of high-resolution VGA video up to 1920x1080 at 60Hz. - Supports transmission of analog stereo audio. - The FV5220C.LTX has a built-in scaler function that allows conversion to 720p/1080p. - Power adapter included (DC12V 1A).

• Security cameras and surveillance systems
• Other commercial buildings and service facilities
• others

The CD408HD is a video distributor that outputs 2 distributed outputs (a total of 8 outputs) for 4 channels of AHD/HD-TVI/HDCVI/composite video signals. It is ideal for distribution to video servers, DVRs, switchers, and more. - There is no attenuation due to distribution, and the output signal is at the same level as the input video signal. The transmission distance varies depending on the specifications of the video input/output devices used. (For example: within the distance that allows direct connection between the camera and recorder for normal transmission.) Please check the specifications of the connected devices for details. *If the transmission distance is insufficient, please use a cable compensator CA101HD (sold separately). - A DC12V power adapter is included. *When using in UTC mode, composite video cannot be distributed. *Control via UTC can only pass through the BNC terminal on one side (top).

• Security cameras and surveillance systems
• Other commercial buildings and service facilities
• others

The CD1632HD is a distributor that outputs 16 systems of AHD/HD-TVI/HDCVI/composite video, each with 2 distribution outputs (a total of 32 outputs). Various video signals can be used in combination. It is ideal for distribution to video servers, DVRs, switchers, and more. - There is no attenuation due to distribution, and the output signal is at the same level as the input video signal. The transmission distance varies depending on the specifications of the video input/output devices used. (For example: within the distance where a camera and recorder can be directly connected and transmit normally.) Please check the specifications of the connected devices for details. *If the transmission distance is insufficient, please use a cable compensator such as the CA101HD (sold separately).

• Security cameras and surveillance systems
• others
• Other commercial buildings and service facilities

The CD102HD is a 2-way splitter that distributes one channel of AHD/HD-TVI/HDCVI/composite video signal into two channels. Additionally, the power connection part is a terminal block that can be securely fixed. Due to its compact size, it is also ideal for integration into camera housings or control panels. - There is no attenuation due to splitting, and the output signal is at the same level as the input video signal. The transmission distance varies depending on the specifications of the video input/output devices used. (For example: within the distance that allows direct connection between the camera and recorder for normal transmission) Please check the specifications of the connected devices for more details. *If the transmission distance is insufficient, please use a cable compensator CA101HD (sold separately) or similar.

• Security cameras and surveillance systems
• Other commercial buildings and service facilities
• others

The 2E11-110 kit A is a set that includes one 1-port transmitter "2E10-110-TX" from the EPo2 (Ethernet & Power over 2 wires) series and one PoE-powered receiver "2E11-110-RX".

• Security cameras and surveillance systems
• Other security systems
• others

TE11-110-RX is an EPoT (Ethernet & Power over UTP/STP cable) receiver (RX). It is powered by PoE and transmits Ethernet and power to an EPoT transmitter (TX) up to 1,200 meters away using CAT5e or higher UTP/STP cables (LAN cables).

• Security cameras and surveillance systems
• Other PCs and OA equipment
• others

The TE10-110-RX is an EPoT (Ethernet & Power over UTP/STP cable) receiver (RX). It is powered by the included power adapter and transmits Ethernet and power to an EPoT transmitter (TX) up to 1,200 meters away using CAT5e or higher UTP/STP cables (LAN cables).

• Security cameras and surveillance systems
• Other PCs and OA equipment
• others

The TE22-120-TX is an EPoT (Ethernet & Power over UTP/STP cable) transmitter (TX) with two PoE Plus compatible LAN ports. It is designed for outdoor use and is waterproof. It operates using PoT power from an EPoT receiver located up to 500 meters away via a CAT5e or higher UTP/STP cable (LAN cable), transmitting Ethernet and power to two connected IP cameras or similar devices.

• Security cameras and surveillance systems
• Other PCs and OA equipment
• others

The TE22-110-TX is an EPoT (Ethernet & Power over UTP/STP cable) transmitter (TX) with one PoE Plus compatible LAN port. It is designed for outdoor use and is waterproof. It operates on PoT power from an EPoT receiver located up to 1,200 meters away using CAT5e or higher UTP/STP cables, transmitting Ethernet and power to connected devices such as cameras.

• Security cameras and surveillance systems
• Other PCs and OA equipment
• others

The XE11-110-RX is an indoor receiver (RX) for EPoC (Ethernet & Power over Coaxial) that has one PoE Plus compatible LAN port. It supplies power via PoE and transmits Ethernet and power to an EPoC transmitter (TX) up to 1,200 meters away using a single coaxial cable.

• Security cameras and surveillance systems
• Other security systems
• others

The XE10-110-RX is an indoor receiver (RX) with one LAN port that uses EPoC (Ethernet & Power over Coaxial). It is powered by the included power adapter and transmits Ethernet and power to an EPoC transmitter (TX) up to 1,200 meters away using a single coaxial cable.

• Security cameras and surveillance systems
• Other commercial buildings and service facilities
• others

The XE22-120-TX is an EPoC (Ethernet & Power over Coaxial) transmitter (TX) with two PoE Plus compatible LAN ports. It is an outdoor model with a waterproof design and built-in surge protector. It operates using PoC power from an EPoC receiver located up to 500 meters away via a single coaxial cable, transmitting Ethernet and power to two connected cameras or similar devices.

• Security cameras and surveillance systems
• Video Monitoring System
• others

The XE22-110-TX is an EPoC (Ethernet & Power over Coaxial) transmitter (TX) with one PoE Plus compatible LAN port. It is an outdoor model with a waterproof design and built-in surge protector. It operates using PoE power from an EPoC receiver located up to 1,200 meters away via a single coaxial cable, transmitting Ethernet and power to connected devices such as cameras.

• Security cameras and surveillance systems
• Other security systems
• others

The 2E10-110 kit A is a set that includes one indoor 1-port transmitter "2E10-110-TX" from the EPo2 (Ethernet & Power over 2 wires) series and one indoor 1-port receiver "2E10-110-RX" with power adapter supply type. (Power adapter included)

• Other elevators and transport systems
• Other security systems
• others

The TE10-110 kit A is a set that includes one indoor 1-port transmitter "TE10-110-TX" from the EPoT (Ethernet & UTP/STP cable) series and one indoor 1-port receiver with power adapter supply type "TE10-110-RX."

• Security cameras and surveillance systems
• Other PCs and OA equipment