ジョブル List of Products and Services

The TE10-110-TX is an indoor transmitter (TX) with one PoE Plus compatible LAN port, designed for EPoT (Ethernet & Power over UTP/STP cable). It operates using PoT power from an EPoT receiver located up to 1,200 meters away via CAT5e or higher UTP/STP cables, transmitting Ethernet and power to connected devices such as cameras.

• Security cameras and surveillance systems
• Other PCs and OA equipment
• others

The XE12-120-TX is an indoor transmitter (TX) with two PoE-compatible LAN ports, designed for EPoC (Ethernet & Power over Coaxial). It operates using PoC power from an EPoC receiver located up to 500 meters away via a single coaxial cable, transmitting Ethernet and power to two connected cameras, among other devices.

• Security cameras and surveillance systems
• Other security systems
• others

The XE10-110-TX is an indoor transmitter (TX) that features one PoE Plus compatible LAN port and utilizes EPoC (Ethernet & Power over Coaxial). It operates using PoC power from an EPoC receiver located up to 1,200 meters away via a single coaxial cable, transmitting Ethernet and power to connected devices such as cameras.

• Security cameras and surveillance systems
• Other security systems

The XE11-110 kit A is a set that includes one indoor 1-port transmitter "XE10-110-TX" from the EPoC (Ethernet & Power over Coaxial) series and one indoor 1-port receiver with PoE power supply type "XE11-110-RX".

• Security cameras and surveillance systems
• Other commercial buildings and service facilities
• others

The SP006H is a surge protector that can be used with Ethernet wiring up to 10Gbps. - It protects equipment from sudden voltage spikes caused by induced lightning and other sources. - It can be used with various transmission devices that utilize 10/100/1000M and 10G network equipment and LAN cables. - It is also ideal for protecting HDMI transmission devices that require large amounts of data transmission via HDBaseT. - It does not require a power supply. - It complies with IEC61000-4-5. *Please use CAT6 or higher LAN cables when displaying video at 1080p 60Hz or above. *To achieve the transmission performance of HDMI 1.4 (10.2Gbps), please use CAT6A or CAT7 LAN cables.

• Lightning protection
• Other security systems
• others

- This is a high-sensitivity microphone with a built-in amplifier that operates at DC12V. - The microphone itself is integrated with a voice/power cable (450mm). - Since the microphone and circuit board are not housed in a case, it is compact and suitable for embedding.

• Other security systems

HKM01-4K transmits up to 4K HDMI and USB, analog audio, infrared remote control (IR) signals, and RS232C over a single LAN cable. - Supports HDMI signals up to 4K 30Hz 4:4:4 - The receiver is equipped with a 4-port USB hub compatible with USB 2.0 - Supports simultaneous bidirectional analog audio transmission - Maximum transmission distance is 140m with CAT6 cable - Compatible with HDCP 1.4

• Other PCs and OA equipment
• Other security systems
• others

The HKM01E transmits HDMI signals and USB 2.0 over a single LAN cable. - Supports a maximum resolution of 1920x1200 - Can transmit up to 120m using CAT5e/6 UTP/STP 4-pair cables *The USB devices that can be used are limited to keyboards and mice only.

• Other PCs and OA equipment
• Other security systems
• others

The FO2202C.LRX is an optical transmission receiver that transmits SD/HD/3G-SDI signals over long distances using a single optical fiber. It can transmit 1 channel of SD/HD/3G-SDI up to 20 km with single-mode optical fiber, and up to 2 km with multi-mode optical fiber. You can select the transmitter according to the input signal. The output from the receiver is a 2-way split of the SDI signal, but you can choose the transmitter based on the input signal. (For SD/HD/3G-SDI input, select FO2210C.LTX; for HDMI input, select FV3210C.LTX *sold separately)

• Security cameras and surveillance systems
• Other security systems
• others

The FO2210C.LTX is an optical transmission transmitter that transmits SD/HD/3G-SDI signals over long distances using a single optical fiber. It can transmit 1 channel of SD/HD/3G-SDI up to 20 km using single-mode optical fiber, and up to 2 km using multi-mode optical fiber. The receiver can be either the FO2202C.LRX, which can output the SD/HD/3G-SDI signal to two outputs, or the FV2303C.LRX, which can convert the SD/HD/3G-SDI signal to HDMI for output. (Sold separately)

• Security cameras and surveillance systems
• Other security systems
• others

VKM02 transmits VGA (analog RGB) video and keyboard/mouse signals (PC side: USB keyboard/mouse connection: PS/2) using two LAN cables! It can transmit up to 100 meters with two CAT5e/6 UTP/STP 4-pair (LAN) cables.

• Other PCs and OA equipment

VE05ALT is a transmitter that can distribute VGA (analog RGB) and stereo audio to four outputs, capable of transmitting each line up to 300 meters via LAN cables. A corresponding number of receivers are required for transmission (high-performance receiver VE02DALS is recommended).

• Other PCs and OA equipment

The HE02P transmits HDMI and infrared remote control signals, RS232C, Ethernet, and power over a LAN cable (HDBaseT). - It supports HDMI signals up to 3840×2160p 60Hz 4:2:0. - The maximum transmission distance is 100m for 1080p 60Hz and 80m for 4K 60Hz. *When using CAT6 cable.

• Other PCs and OA equipment

The HE01SI transmits HDMI signals and infrared remote control signals over a single CAT5e/6 LAN cable. - It is also capable of transmitting signals from infrared remote controls that operate monitors and video equipment (one-way selection). - Maximum transmission distance: 720p/1080i: 60m, 1080p: 45m (CAT6)/40m (CAT5e). - It includes a transmitter (HE01SIT), a receiver (HE01SIR), an infrared receiving cable, an infrared emitting cable, and a power adapter.

• Other PCs and OA equipment

The HE01SE transmits HDMI signals over LAN cables up to 40 meters (1080p). - LAN cables (straight-through wiring, RJ45 on both ends) can be used. - Set includes transmitter (HE01ST) and receiver (HE01SER). - HE01SER is a compact receiver that does not require an external power supply and can be directly connected to HDMI ports on monitors and other devices. - Includes one power adapter (for transmitter/HE01ST).

• Other PCs and OA equipment
• Other security systems
• others

The 00FCf/STm-SM-ADAPTOR is an adapter that converts a single-mode fiber optic FC connector (male) to an ST connector (male). (The conversion adapter itself has an FC female to ST male configuration.)

• Other security systems

The 00STF-SCM-SM-ADAPTOR is an adapter that converts a single-mode optical fiber ST connector (male) to an SC connector (male). (The conversion adapter itself is ST female ⇔ SC male.)

• Other security systems

The VAD-PS-RACK is a power adapter compatible with the power distribution unit "VAD-PDU-D" for the VAD-RACK series of 19-inch rack mount chassis designed for optical transmission equipment. - Input: AC 100-260V 50/60Hz Output: DC 12V 60W (maximum) - AC cable included.

• Other security systems

The VAD-PDU-D is a power distribution unit for 19-inch rack mount chassis that distributes power to multiple optical transmission devices and more. - Used in conjunction with the power adapter "VAD-PS-RACK" - Capable of distributing power to 16 modules - Can connect devices with a maximum of 120W (when connecting 2 units of the power adapter "VAD-PS-RACK") - Usable with case-type optical transmission device rack mount chassis such as "VAD-RACK-SD-ET"

• Other security systems

The VAD-RACK-SD-ET is a 19-inch rack mount chassis of the 3U type for optical transmission equipment in a case type. - It can accommodate multiple units of optical fiber transmission equipment in a case type. - It can house one power distribution unit "VAD-PDU-D" and up to two power adapters "VAD-PS-RACK."

• Security cameras and surveillance systems
• Other security systems
• others

The VAD-RACK-14-4U is a 19-inch rack mount chassis for optical transmission equipment, 4U type. - It can accommodate one power distribution unit "VAD-PDU-D" and up to two power adapters "VAD-PS-RACK." - Stable operation is ensured by cooling from a large fan at the rear.

• Security cameras and surveillance systems
• Other security systems
• others

The HD04-4K6G is a 4-way splitter that outputs an input HDMI signal to four outputs. - Supports up to 4K 60Hz 8bit 4:4:4 video - EDID supports built-in/signal pass-through/recording - HDMI signal bandwidth supports up to 18Gbps - Audio supports LPCM 7.1ch 192kHz, Dolby TrueHD, and DTS-HD MA - Supports HDCP 1.4/2.2 - Power adapter included

• Other commercial buildings and service facilities
• Security cameras and surveillance systems
• others

The GL001HP-1A is a ground loop isolator that interrupts ground loops generated through the power supply of devices operating on DC12V, such as various surveillance cameras, sensors, and control equipment installed in remote locations. - It suppresses the causes of noise that affect video and communication through the power supply. - The connection terminal is a DC jack to DC plug, allowing for easy connection between devices like cameras and the power adapter. - It is compatible with devices operating on DC12V with a maximum of 1A. - It is effective against video noise caused by ground loops and disruptions in communication of control signals such as UTC.

• Other security systems
• others

The TTA111HDR is an active receiver that transmits AHD/HD-TVI/HDCVI/composite video over twisted pair cables for long distances. - When combined with passive types such as the TTP111HD, it can transmit AHD (720p/1080p) up to 600m/500m. - When combined with active types such as the TTA111HDT, it can transmit AHD (720p/1080p) up to 600m/500m. - It also supports composite video. - Up to 5 TTA111HDR units can be connected using the included power linking cable to be powered by a single power adapter. - Using the optional 19-inch rack mount panel "TPN008," up to 8 units can be installed in a 19-inch rack 2U. - Power adapter included. *When used in combination with active transmitters such as the TTA111HDT, do not use UTP cables longer than 200m. Excessively amplified signals may cause video distortion.

• Security cameras and surveillance systems
• Other security systems
• others

The AD001HDE is a video converter that converts AHD/HD-TVI/HDCVI and composite video (CVBS) to HDMI, VGA, and composite video (CVBS). (Simultaneous output is not possible.) - HDMI and VGA output resolutions can be set (up to 1080p). - It has a loop output that can re-output the input video signal.

• Security cameras and surveillance systems
• Other commercial buildings and service facilities
• others

AD001HD1 is a video converter that converts AHD/HD-TVI/HDCVI video signals to composite. - Loop output of AHD/HD-TVI/HDCVI video is possible. - The loop output can pass the UTC camera control signal to the camera side.

• Security cameras and surveillance systems
• others
• Other security systems

The HKM02BPx-4K transmits up to 4K HDMI, bidirectional RS232C, USB, infrared remote control signals, and analog audio over IP (Ethernet). (Supports PoE power receiving) - The transmitter and receiver operate with PoE power receiving. When connected using a PoE switch, no power adapter is required. - It supports input up to 2160p 60Hz (3840×2160). (The output can be converted to any resolution with a maximum of 2160p 30Hz.) - The maximum transmission distance is 150m with a CAT6 cable. - It supports control of the transmitter using RS232C. - It is compatible with HDCP 1.4/2.2. - HDMI audio supports LPCM 7.1ch 192kHz. - It supports bidirectional analog audio communication (in unicast mode). - Bidirectional transmission of infrared remote control signals is possible. - The transmitter (HKM02BPT-4K) also supports loop output of the input video signal. - The receiver (HKM02BPR-4K) is equipped with a USB hub. * The transmitter and receiver are sold separately (power adapter included).

• Other PCs and OA equipment

The HKM02Bx-4K transmits up to 4K HDMI, bidirectional RS232C, USB, infrared remote control signals, and analog audio over IP (Ethernet). - It supports input up to 2160p 60Hz (3840×2160). (The output can be converted to any resolution with a maximum of 2160p 30Hz.) - The maximum transmission distance is 150m with CAT6 cable. - HDMI audio supports LPCM 7.1ch 192kHz. - It supports control of the transmitter using RS232C. - It supports bidirectional analog audio calls (in unicast mode). - Bidirectional transmission of infrared remote control signals is possible. * The transmitter and receiver are sold separately (power adapter included).

• Other PCs and OA equipment

The HKM02Bx transmits HDMI signals along with bidirectional RS232C, USB, infrared remote control signals, and analog audio over IP (Ethernet). - It supports HDMI video signals up to 1080p 60Hz and 1920×1200 60Hz. - The maximum transmission distance is 150m using CAT6 cable. - HDMI audio supports LPCM 7.1ch 192kHz. - It supports bidirectional analog audio calls (in unicast mode). - The transmitter (HKM02BT) also supports loop output of the input HDMI. - The receiver (HKM02BR) is equipped with a 4-port USB hub (2 USB 2.0 and 2 USB 1.1). *The transmitter and receiver are sold separately (power adapter included).

• Other PCs and OA equipment

The CHB001HM transmits composite video and audio by modulating them onto an RF signal and outputs them after demodulation. It can be set for 1 to 16 channels, allowing for the transmission of up to 16 sets of composite video and audio over a single coaxial cable. The transmission distance can reach up to 600 meters (Channel 1) using 5C-2V/5C-FB cables. Additionally, since it transmits by riding on a high-frequency carrier wave, it can be used as a noise removal device to eliminate interference from electromagnetic waves, high-voltage power lines, wireless signals, elevators, motors, and other sources.

• Other security systems

The GL001HDP is a device that eliminates ground loops, which are one of the major causes of noise in video signals such as AHD/HD-TVI/HDCVI/composite in surveillance camera systems, restoring clear images. Ground loops occur when two or more devices connected by video cables are connected to grounding points with different potentials. The GL001HDP effectively mitigates the effects of ground loops with easy installation.

• Other security systems
• Security cameras and surveillance systems
• others

The GL001HD is an active ground loop isolator (video transformer) that supports AHD/HD-TVI/HDCVI and composite video. It suppresses noise by blocking the current generated by potential differences between connected devices. Additionally, it reduces interference from the power supply systems of surrounding equipment. The active type GL001HD is optimal for long-distance transmission of video signals as it does not cause signal attenuation when connected.

• Other security systems
• Security cameras and surveillance systems
• others

GL001H is a low-loss type video transformer that removes ground loop noise. It is ideal for long-distance transmission wiring using coaxial cables due to its minimal attenuation of composite video signals through connections.

• Other security systems

The IP02EP transmits power (DC5V or DC12V) and Ethernet over a single coaxial cable. It is convenient for using IP cameras with coaxial cable wiring. *Not compatible with PoE. The power can also be used for devices other than the camera, such as infrared illuminators, sensors, and microphones.

• Security cameras and surveillance systems

The IP07M transmits 10/100M Ethernet and camera power over coaxial cable or 2-core cable. It supports camera installation along the wiring and can connect up to 4 IP cameras by linking a maximum of 5 IP07M units. *The IP07M is a single unit product. Two or more units (one for transmission and one for reception) are required for transmission. Model details: Model/IP07M: IP07M ×1 (without power adapter) Model/IP07MK: IP07M ×2 (without power adapter) Model/IP07MK-DC56V: IP07M ×2 + DC56V power adapter

• Security cameras and surveillance systems

The UE02H transmits USB 1.0/1.1/2.0 over LAN cables for long-distance transmission (with a 4-port USB hub function). It can transmit up to 120m with CAT5e and up to 140m with CAT6. Transmission is done between UE02HT (PC side) and UE02HR (USB device side).

• Other PCs and OA equipment
• Other security systems
• others

The VDL5030 is a long-distance transmission device that transmits PoE/PoE Plus Ethernet over coaxial cable up to 1,000 meters (30W transmission with PoE Plus using 5C-FB). It supports high-speed transmission of 100 Mbps in both directions, making it suitable for IP transmission of high bitrate video. It is effective for converting existing analog camera systems to IP.

• Entrance and exit control system

The HE03-4K is a long-distance transmitter capable of transmitting HDMI signals (up to 4K) over LAN cables for a maximum distance of 140 meters. It supports HDMI signals up to 4K 30Hz YCbCr 4:4:4. By using the optional receiver "HE03LR-4K," it is also possible to extend the HDMI output and transmit over two LAN cables.

• Other PCs and OA equipment
• Other security systems
• others

HE04SEK is a 1 input 4 output CAT5e transmitter that distributes HDMI to 4 outputs and transmits via LAN cable. - Supports HDMI signals up to 1920x1080p 60Hz - Maximum transmission distance is 40m at 1080p 60Hz and 70m at 720p/1080i 60Hz *When using CAT6 cable

• Other PCs and OA equipment
• Other security systems
• others

APBR01 is a conversion connector with a BNC female and an RCA male terminal. It allows conversion from a BNC male terminal to an RCA male terminal, or from an RCA female terminal to a BNC female terminal.

• Other security systems

The WC414-200 is a convenient cable that consolidates the wiring for four video signals into a single 2-meter cable. It is compatible with AHD/HD-TVI/HDCVI/composite video.

• Other security systems

WC414 is a convenient cable that consolidates the wiring for four video signals into a single cable (1m). It supports AHD/HD-TVI/HDCVI/composite video.

• Other security systems

The JDC-2W is a cable designed to split power from an AC adapter into two outputs. - The jack employs a structure that clamps from six directions with a spring, ensuring a secure fit without looseness or poor contact. - The plug uses a fork (tuning fork) type design, which also ensures a secure fit without looseness or poor contact. - The cable is made with 24AWG wire and has a generous rating of 300V and 3.5A.

• Wiring devices

The SP006PHO is a gigabit PoE-compatible surge protector that protects LAN-connected devices from high-voltage surges such as lightning strikes (10/100/1000M, PoE++, suitable for outdoor installation). - It can be used with 10/100/1000M network devices that support PoE/PoE Plus/PoE++. - It is also compatible with various transmission devices using LAN cables. - It complies with IEEE 802.3af / IEEE 802.3at and IEEE 802.3bt standards. - It can be used with PoE devices up to 90W. - It supports both Alternative A and Alternative B. *Note: This type requires the LAN cable to be passed through a waterproof box before attaching the RJ45 connector.

• Lightning protection
• Other security systems
• others

The VE02ALT is a transmitter that outputs high-resolution VGA (analog RGB) up to 1920x1200 at 60Hz and audio in two distributed outputs, transmitting up to 300 meters for each system with a single LAN cable. Separate receivers (VE02DALS) are required for the number of systems for transmission.

• Other PCs and OA equipment
• Other security systems
• others