ジョブル List of Products and Services

The JVCF-002MINI-TXRX is a long-distance transmitter that transmits HD-SDI signals (video/audio) up to 500 meters via 5C-FB coaxial cable. It is a set that includes the transmitter "TX500" and the receiver "RX500." - Extends HD-SDI signals (video/audio) up to 500 meters using 5C-FB - Supported SDI standard: HD-SDI (SMPTE292M) - Set includes transmitter (TX500) and receiver (RX500) with power adapter - Equipped with equalization and timing correction functions - Transmits all signal information - Includes LED indicators for link status and power status *Only HD-SDI signals (video/audio) can be transmitted. Power and control signals cannot be transmitted.

• Security cameras and surveillance systems
• Other security systems
• others

- Coaxial cable surge protector JMSB-HDV-P with SEAT method (absorbing surge energy and dispersing it) that does not require grounding - Surge protector suitable for coaxial cable wiring of video signals/high-frequency signals - Usable with HD-SDI/AHD/HD-TVI/HDCVI/analog video signals - Compatible with power-over devices (passing voltage: up to DC76V) - Protects both signal lines and power lines - Protects equipment from various surges without the need for grounding work - Blocks surges caused by electromagnetic pulses - Blocks surges caused by switching and lightning transients * Please connect transmission cables that may have surge contamination to the "IN" side and the equipment to be protected to the "OUT" side.

• Lightning protection
• Security cameras and surveillance systems
• others

The SP016HD is a surge protector for 16 channels that supports AHD/HD-TVI/HDCVI composite video transmitted via coaxial cable (BNC connector). It is a 1U size that can be mounted in a 19-inch rack and allows for the connection of up to 16 video channels. It diverts surges caused by induced lightning and other sources in the transmission cable to ground before reaching the equipment. The surge protector should be installed as close as possible to the equipment that needs protection. When protecting a camera, it should be placed near the camera, and when protecting a monitor or DVR, it should be installed near the monitor/DVR. The basic surge protection strategy is to install protectors on both the camera side and the display device (monitor) side. If the SP016HD is installed on the monitor side, additional SP009 (for one channel) units can be installed on the camera side for each camera wiring.

• Security cameras and surveillance systems

The 2E11-110-RX is an EPo2 (Ethernet & Power over 2 wires) receiver (RX). It supplies power via PoE and transmits Ethernet and power to an EPo2 transmitter (2E10-110-TX) located up to 600 meters away using telephone lines or a pair of UTP/STP two-wire cables.

• Security cameras and surveillance systems
• Other security systems
• others

The TE11-110 kit A is a set that includes one indoor 1-port transmitter "TE10-110-TX" from the EPoT (Ethernet & Power over UTP/STP cable) series and one PoE-powered receiver "TE11-110-RX."

• Security cameras and surveillance systems
• Other PCs and OA equipment
• others

The LTE65ES-S2-3 is a DC 12V 5A power adapter that converts AC 100V to DC 12V. - It uses a switching method, making it compact and low heat generation. - There is no voltage fluctuation due to load.

• DC Power Supply
• others

The LTE24WS-S2 is a DC 12V 2A power adapter that converts AC 100V to DC 12V. - It uses a switching method, is compact, and has low heat generation. - There is no voltage fluctuation due to load.

• DC Power Supply
• others

The LTE12WS-S2 is a DC 12V 1A power adapter that converts AC 100V to DC 12V. - It uses a switching method, making it compact and low heat generation. - There is no voltage fluctuation due to load. - The DC cable is designed for easy connection to the terminal block with stripped ends. * There is also a DC plug type available with the same model number LTE12WS-S2. Please specify whether you want the terminal block connection type or the DC plug type when placing your order.

• DC Power Supply
• others

The LTE10UW-S1-BS34 is a DC5V 2A power adapter that converts AC100V to DC5V. (Plug size: Φ2.1✕5.5mm type) - It uses a switching method, making it compact and low heat generation. - There is no voltage fluctuation due to load.

• DC Power Supply

The LTE10UW-S1-BS33 is a DC5V 2A power adapter that converts AC100V to DC5V. - It uses a switching method, making it compact and low heat generation. - There is no voltage fluctuation due to load. - The plug size is Φ2.5✕5.5mm, ensuring it cannot be mistakenly plugged into our DC12V power adapter products. *There is also a LTE10UW-S1-BS34 with a plug size of Φ2.1✕5.5mm.

• others
• DC Power Supply

VAD-SD001A.L1.xxx.8 transmits a single system control (serial) signal bidirectionally over single-mode optical fiber up to 20 km and over multi-mode optical fiber up to 3 km. The serial signal can be selected from RS232C/422/485 for use.

• Other security systems
• Security cameras and surveillance systems
• others

APB310 is a conversion connector that splits the BNC female connector of the device into two. It is useful for connecting Ethernet long-distance coaxial transmission devices such as the EPoC series, which can be connected in a daisy chain.

• Security cameras and surveillance systems

BNC-Y is a conversion connector that splits the BNC female connector of the device into two. Its Y-shape prevents the wiring from spreading out sideways, making it suitable for wiring in tight spaces.

• Security cameras and surveillance systems
• others

UTP-YC is a cable used to split an RJ45 connection into two branches (RJ45 plug ⇔ RJ jacks × 2) when connecting the EPoT series in a daisy chain or ring configuration. Its dust and water resistance rating is IP67, allowing it to be used outdoors as is. *This cable is not designed to split standard LAN wiring into two branches.

• Other security systems
• others

The IP09 is a repeater that extends 100M Ethernet up to 260m (130m on both input and output sides) and 10M Ethernet up to 500m (250m on both input and output sides). It can also be connected in a 1-to-1 configuration and used as a transmitter, with a transmission distance of up to 500m for 100M Ethernet and up to 800m for 10M Ethernet between two IP09 units. The distance can be extended with each additional unit. *The set of 2 units of IP09 (with power adapter included) is model number: IP09K. - Supports 10BASE-T/100BASE-TX/100BASE-T1 - Auto MDI/MDI-X compatible - Supports full duplex and half duplex communication - Supports EEE (Energy-Efficient Ethernet) - Built-in surge protector (with withstand voltage: 1.5kV)

• Other PCs and OA equipment
• Other security systems
• others

The VE01HA uses a single LAN cable to transmit VGA (analog RGB) and analog stereo audio up to 70 meters. It is a set that includes the VE01HAT (transmitter) and VE01HAR (receiver), along with a power adapter (for the transmitter). (The receiver does not require power.)

• Other PCs and OA equipment
• Other security systems
• others

The S243D-A-IR series (AC85-265V power supply) is a type that connects three outdoor-compatible infrared floodlights (S24D-A-IR) equipped with 24 high-output LEDs, allowing for infrared irradiation over a wider area and longer distances. Since the irradiation angle and wavelength can be selected, it can flexibly adapt to different installation locations.

• Floodlight
• Other security systems
• others

The S242D-A-IR series (AC85-265V power supply) is a type that connects two outdoor-compatible infrared floodlights (S24D-A-IR) equipped with 24 high-output LEDs, allowing for a wider and longer-range infrared projection. Since the irradiation angle and wavelength can be selected, it can flexibly adapt to different installation locations.

• Floodlight
• Security cameras and surveillance systems
• others

The S06D-C-IR series (DC12V power supply type) is an infrared floodlight designed for outdoor installation. It can be installed in small and narrow spaces. Since the irradiation angle and wavelength can be selected, it can flexibly adapt to different installation locations.

• Floodlight
• Other security systems
• others

The S06D-A-IR series (AC110-220V power type) is an infrared floodlight designed for outdoor installation. It can be installed in small and narrow spaces. Since the irradiation angle and wavelength can be selected, it can flexibly adapt to different installation locations.

• Floodlight
• Other security systems
• others

The S04D-C-IR series (DC12V power supply type) is an infrared floodlight designed for outdoor installation. It can be installed in small and narrow spaces. Since the irradiation angle and wavelength can be selected, it can flexibly adapt to different installation locations.

• Floodlight
• Other security systems
• others

The S04D-A-IR series (AC110-220V power type) is an infrared floodlight designed for outdoor installation. It can be installed in small and narrow spaces. Since the irradiation angle and wavelength can be selected, it can flexibly adapt to different installation locations.

• Floodlight
• Other security systems
• others

The S-SA3-C-IR series is an infrared floodlight (DC power type) designed for outdoor installation. It can be installed in small and narrow spaces. Since the irradiation angle and wavelength can be selected, it can flexibly adapt to different installation locations.

• Floodlight
• Other security systems
• others

The S-H301-A-IR series (AC100-240V power type) is an infrared floodlight designed for outdoor installation. It is equipped with 30 high-output LEDs, allowing for long-distance infrared projection. The angle of irradiation and wavelength can be selected, enabling flexible adaptation to different installation locations.

• Floodlight
• Other security systems
• others

The CD1664HD is a distributor that outputs 4 distributed channels of AHD/HD-TVI/HDCVI analog HD video or composite video (NTSC/PAL) for a total of 16 channels. - It supports signals up to 100MHz. - AHD/HD-TVI/HDCVI can comply with UTC (a standard that overlays control signals onto video coaxial cables). - There is no attenuation due to distribution, and the output signal is at the same level as the input video signal. The transmission distance varies depending on the specifications of the video input/output devices used. (For example, within the distance that allows direct connection between the camera and recorder for normal transmission) Please check the specifications of the connected devices for details. *If the transmission distance is insufficient, please use a cable compensator CA101HD (sold separately). - A DC12V power adapter is included. *When using in UTC mode, composite video cannot be distributed. *Control via UTC can only pass through one BNC terminal per channel (the terminal labeled VIDEO DATA).

• Security cameras and surveillance systems
• Other commercial buildings and service facilities
• others

The CD816HD is a distributor that outputs analog HD video or composite video (NTSC/PAL) from 8 channels of AHD/HD-TVI/HDCVI, with each channel being split into 2 outputs. - Supports video signals up to 100MHz - Signal input status is displayed by an LED on the front panel - There is no attenuation due to distribution, and the output signal is at the same level as the input video signal The transmission distance varies depending on the specifications of the video input/output devices used. (For example: within the distance where a camera and recorder can be directly connected and transmit normally) Please check the specifications of the connected devices for details. *If the transmission distance is insufficient, please use a cable compensator CA101HD (sold separately). - Video input/output and power input are protected against ESD by TVS - Operates on DC 9-24V - DC 12V power adapter included

• Security cameras and surveillance systems
• Video Monitoring System
• others

The CD108HD is a distributor that outputs HD video or composite video (NTSC/PAL) in 8 ways from a single system of AHD/HD-TVI/HDCVI. - AHD/HD-TVI/HDCVI can support UTC (a standard for superimposing control signals on video coaxial cables). - It has a dedicated terminal for UTC connection, and can also be used as a 9-way distributor for AHD/HD-TVI/HDCVI. - It supports signals up to 100MHz. - There is no attenuation due to distribution, and the output signal is at the same level as the input video signal. The transmission distance varies depending on the specifications of the video input/output devices used. (Example: within the distance that allows direct connection between the camera and recorder for normal transmission) Please check the specifications of the connected devices for details. *If the transmission distance is insufficient, please use a cable compensator CA101HD (sold separately) or similar. - It has a built-in TVS to protect the equipment from ESD surges. *When using in UTC mode, composite video cannot be distributed.

• Security cameras and surveillance systems
• Other commercial buildings and service facilities
• others

The CD104HD is a 4-way splitter that distributes one channel of AHD/HD-TVI/HDCVI/composite video signals into four outputs. - Supports signals up to 150MHz - AHD/HD-TVI/HDCVI can be compatible with UTC (a method of overlaying control signals onto video coaxial cables) - There is no attenuation due to splitting, and the output signal is at the same level as the input video signal. The transmission distance varies depending on the specifications of the video input/output devices used. (For example: within the distance that allows direct connection between the camera and recorder for normal transmission) Please check the specifications of the connected devices for details. *If the transmission distance is insufficient, please use a cable compensator CA101HD (sold separately). - Built-in TVS to protect the device from ESD surges - Green LED lights up when power is supplied - Low power consumption of 1.4W - DC12V power adapter included *When using in UTC mode, composite video cannot be split *Control in UTC mode is only possible through the BNC terminal of output 4.

• Security cameras and surveillance systems
• Other commercial buildings and service facilities
• others

The S24D-C-IR series is an infrared floodlight (DC power type) designed for outdoor installation. It is equipped with 24 high-output LEDs, allowing for long-distance infrared projection. The angle of irradiation and wavelength can be selected, enabling flexible adaptation to different installation locations.

• Floodlight
• Other security systems
• others

The S24D-A-IR series is an infrared floodlight designed for outdoor installation (AC85-265V power type). It is equipped with 24 high-output LEDs, allowing for long-distance infrared projection. The angle of irradiation and wavelength can be selected, enabling flexible adaptation to the installation location.

• Security cameras and surveillance systems
• Other lighting fixtures
• others

1ch Compact DVR for HD-SDI/HDMI JETSA-681HA - High-quality, high-compression recording in H.265 via HD-SDI or HDMI - Compact palm-sized housing that can accommodate an internal HDD - Supports recording to internal HDD/SSD, SD cards, and USB storage *Recording media such as HDD are optional. - Operating temperature range of -20 to 65°C / Recording data protection via supercapacitor - Automatic time correction and location information recording possible by connecting an optional GPS antenna (model: ETGM-5019) - Supports video playback linked with maps using optional playback software (eOffLine)

• Security cameras and surveillance systems
• Other store equipment and supplies
• others

The RS007 is a LAN serial converter that bidirectionally converts RS232C/422/485 and Ethernet. * Only one selected type of RS232C/422/485 can be used. - By using the RS007 in a peer-to-peer configuration, serial transmission over Ethernet is possible. - It can be registered as a virtual COM port on a PC running Windows (Windows 7/8/8.1/10 32/64bit). - RS232C supports not only TxD and RxD but also CTS, RTS, DSR, DTR, RI, and DCD. - Ethernet connection is via an RJ45 connector, 10/100Mbps, and supports AutoMDX/MDIX.

• Other PCs and OA equipment
• Other security systems
• others

The SD-301 is a surge protector for coaxial cables that protects devices such as transmitters that transmit Ethernet and video signals from induced lightning occurring on the coaxial cable. It supports power superimposition up to DC 60V and protects connected devices from induced lightning. *Please be sure to connect to ground when in use.

• Lightning protection
• Security cameras and surveillance systems
• others

UE01 transmits USB 1.1 over LAN cables for long distances. It can transmit up to 70 meters at full speed (12 Mbps) and up to 300 meters at low speed (1.5 Mbps).

• Other PCs and OA equipment
• Other security systems
• others

The SP009 is a surge protector that protects video equipment from high voltage surges transmitted through AHD/HD-TVI/HDCVI and composite video signal transmission cables. - It protects connected equipment from rapid voltage increases caused by induced lightning and other sources. - The terminals are BNC male to BNC female, allowing for direct connection between the BNC terminal on the back of the camera and the cable. * Please connect the equipment to be protected at the Equipment End of the cable that may have surges flowing in at the Cable End. * Ensure that the ground wire is properly grounded (Type D grounding).

• Lightning protection
• Other security systems
• others

The JCH-L80AP-4HV is an 8-inch LCD monitor that supports HDMI, VGA, and composite inputs! HDMI supports embedded audio, while VGA and composite support external audio input!

• Security cameras and surveillance systems
• Other PCs and OA equipment
• others

The JCH-L101-2HDVSB-SDI is a 10.1-inch LCD monitor that supports HDMI, DVI, VGA, and SDI inputs. - SDI can accept inputs up to 3G-SDI at 1080p 60Hz. - It features a sturdy housing with a metal case and aluminum frame.

• Security cameras and surveillance systems
• Other security systems
• others

The JCH-L81-4HDVSB-SDI is an 8-inch LCD monitor that supports HDMI, DVI, VGA, and SDI inputs. - SDI input is capable of up to 3G-SDI at 1080p 60Hz. - It features a sturdy metal case and aluminum frame.

• Security cameras and surveillance systems
• Other security systems
• others

The JCH-L81AV-4HV-AT is an 8-inch LCD monitor that supports AHD/HD-TVI/composite input. - It also has a VGA input that is compatible with video display from PCs and recorders. - It features a sturdy casing with a metal case and aluminum frame.

• Security cameras and surveillance systems
• Other security systems
• others

The XC10-084-380 is a coaxial transmission switch (8-port receiver) equipped with 8 BNC ports, 2 GbE RJ45 ports, and 2 GbE SFP ports, supplying a total of 380W of power over coaxial cables. Each BNC port transmits Ethernet and power to EPoC (Ethernet & Power over Coaxial) transmitters (TX) located up to 1,200 meters away via coaxial cables.

• Security cameras and surveillance systems
• Other commercial buildings and service facilities
• others

The JCH-L101AV-2HVB-AT is a 10.1-inch LCD monitor that supports AHD/HD-TVI/HDCVI/composite input. - It also supports VGA video input from PCs and recorders. - It features a sturdy housing with a metal case and aluminum frame.

• Security cameras and surveillance systems
• Other security systems
• others

The JCH-L80AP-4HV-AT is an 8-inch LCD monitor that supports AHD/HD-TVI/HDCVI/composite video inputs. - AHD/HD-TVI/HDCVI video can be re-output from the active through output terminal. - A camera bracket can also be used.

• Security cameras and surveillance systems
• Other security systems
• others

The JCH-L215-4HDVSB-IP32 is a 21.5-inch LCD monitor that can display video from up to 32 IP cameras without connecting to an NVR or PC. - Capable of displaying video from network cameras that support ONVIF/RTSP via LAN connection - Displays video from 32 cameras in a single screen/split view - Easy network setup and operation using the included USB mouse and GUI interface - Supports operation of PTZ cameras - Compatible with H.264/H.265 codecs - Supports cameras up to 8MP - Full HD LCD monitor with a resolution of 1920x1080 - Uses long-lasting, low-power LED backlighting - Wide viewing angles in all directions for easy visibility - HDMI, DVI-D, and VGA inputs for video display from PCs and recorders - Sturdy housing with a metal case and aluminum frame - VESA mount compatible (shipped with the included stand attached) - Supports remote viewing over the network via Android and iOS devices *Note: Does not support connection via browser from a PC.*

• Security cameras and surveillance systems
• Other security systems
• others

The JCH-L270-2HDVSB-IP32 is a 27-inch LCD monitor capable of displaying video from up to 32 IP cameras without the need to connect to an NVR or PC. - Supports video from network cameras compatible with ONVIF/RTSP via LAN connection - Displays video from 32 cameras in a single screen/split view - Easy network setup and operation using the included USB mouse and GUI interface - Compatible with PTZ camera control - Supports H.264/H.265 codecs - Compatible with cameras up to 8MP - Full HD 1920x1080 LCD monitor - Uses long-lasting, low-power LED backlighting - Wide viewing angles in all directions for easy visibility - HDMI, DVI-D, and VGA inputs for video display from PCs, recorders, etc. - Sturdy housing with a metal case and aluminum frame - VESA free mount compatible (shipped with the included stand attached) - Supports remote viewing over the network via Android and iOS devices *Note: Does not support connection via browser from a PC.

• Security cameras and surveillance systems
• Other security systems
• others

The JCH-L320-3HDVSB-IP32 is a 32-inch LCD monitor capable of displaying video from up to 32 IP cameras without the need to connect to an NVR or PC. - Supports video from network cameras compatible with ONVIF/RTSP via LAN connection - Displays video from 32 cameras on a single screen/split display - Easy network setup and operation using the included USB mouse and GUI interface - Supports operation of PTZ cameras - Compatible with H.264/H.265 codecs - Supports cameras up to 8MP - Full HD LCD monitor with a resolution of 1920x1080 - Uses LED backlight for long lifespan and low power consumption - Wide viewing angles in all directions for easy visibility - HDMI, DVI-D, and VGA inputs for video display from PCs and recorders - Sturdy housing with a metal case and aluminum frame - VESA free mount compatible (shipped with the included stand attached) - Supports remote display via network using Android and iOS devices *Note: Does not support connection via browser from a PC.*

• Security cameras and surveillance systems
• Other security systems
• others