ジョブル List of Products and Services

The HDMI CAT5e transmitter HE01S transmits 1080p video up to 40m (60m for 720p/1080i) using LAN cables. It is ideal for transmitting video to large monitors, signage displays, and projectors located away from the equipment. Since LAN cables can be used for transmission, wiring is easy. Just connect the RJ45 connector and the transmitter after wiring, and you're done!

• Other PCs and OA equipment
• Other security systems
• others

- Distributes the input power to 9 outputs from the terminal block - Each output has a built-in 1.1A resettable fuse (PPTC) - The LED next to each output lights up when power is being supplied normally - Supports DC/AC power up to 30V

• Power distribution and control panels
• others

- Long-distance transmission of contact signals from 24 types of sensors and switches using a single optical fiber. - Transmission with VAD-D0024R.L1.TU (transmitter) and VAD-D0024R.L1.RU (receiver). - Capable of transmitting up to 3 km with multimode optical fiber and up to 20 km with single-mode optical fiber. - Usable in a wide temperature range of -20°C to 75°C. - 19-inch rack mount, 1U size. - Compatible with AC100 to 240V. - Blocks EMI, RFI, crosstalk, and ground loops.

• Security guards and entrance/exit management
• Other security systems
• others

- 1 video (composite) input and 2 output video distributor (compact type) - Usable with either DC12V or AC24V. Power ON/OFF can be confirmed with a red LED. * The power connection part is a terminal block, allowing for secure fixation. - Includes DC12V power adapter / power jumper cable (55mm)

• Other security systems
• Other commercial buildings and service facilities
• others

The AE02GL eliminates one of the major causes of noise in audio systems, which is ground loops, thereby reducing noise. Ground loops occur when two or more devices connected by cables are connected to grounding points with different potentials. The AE02GL suppresses the effects of ground loops with a simple connection.

• Other store equipment and supplies

This is a 16-way distributor for RS485 signals that also supports RS485 or RS232C input. The RS485 input is distributed as is, while the RS232C input is converted to RS485 before being distributed. - Signals can be transmitted from each output using a maximum of 1,200m UTP cable - Up to 3 input lines can be connected (not usable simultaneously) - Communication speed is automatically detected (1200 to 115200 bps) - Power adapter included.

• Other security systems
• Other commercial buildings and service facilities
• others

RS008 is an RS485 signal 8-way splitter that also supports RS485 and RS232C inputs. The RS485 input is distributed directly, while the RS232C input is converted to RS485 before being distributed. - Signals can be transmitted from each output using a maximum of 1,200m UTP cable - Up to 3 input lines can be connected (not usable simultaneously) - Communication speed is automatically detected (1200 to 115200 bps) - Power adapter included

• Other security systems
• Other commercial buildings and service facilities
• others

The VE02DALS is a high-performance receiver for long-distance transmission of VGA (analog RGB) and audio over CAT5e, designed to be used in combination with transmitters like VE02ALT, VE05ALT, and VE10DAL for VGA (audio) transmission. - It supports analog stereo audio (LINE) and digital audio (S/PDIF coaxial/optical). - It features a color deviation correction function that compensates for differences in UTP length (twist density) within the CAT5e cable, allowing transmission without the need for distance adjustment adapters in the middle or at the end of the transmission cable. - The maximum resolution for VGA video is 1920x1200 at 60Hz. - The maximum transmission distance is 300m (further extension is also possible). - Both ends of the transmission cable use RJ45, allowing for the use of commercially available LAN cables (straight wiring). - Video gain and brightness can be adjusted with a volume control. - Power adapter included.

• Other PCs and OA equipment
• Other security systems
• others

- This is a module for inputting and outputting digital signals. - It outputs via relays. - Includes a mounting base for panel and DIN rail.

• Other security systems

RS232C⇔RS485 Bi-directional Converter RS001 - Converts RS232C to RS485 (2-wire half-duplex communication) - The RS232C side connector is a D-sub 9-pin female, which can be directly attached to the RS232C port - Communication speed is automatically recognized (up to 115,200 bps) - Up to 32 RS485 devices can be connected (total wiring length up to 1,200m)

• Other security systems
• Sports related facilities
• others

- Extends 2-wire RS485 signals up to a maximum of 1,200m at both ends. (By receiving and re-outputting the RS485 signal, transmission of up to 2,400m is possible.) - Supports 2-wire half-duplex communication. - Communication speed supports up to a maximum of 115200bps. - Insulation structure up to 2.5kV.

• Other security systems
• others

DVI Signal CAT5e Transmitter Compact Type - Transmits DVI-D (single link) over a single CAT5e/6/7 cable. *CAT6 or higher cable is recommended. - Maximum transmission distance is 50m for 1920x1200 and 70m for 1024x768. *For longer distances, the DVI-D long-distance transmitter DE02E (HDCP compatible) is also available, which can transmit up to 100m. - Set includes DE01ET (PC side) and DE01ER (monitor side). - Both ends of the transmission cable use RJ45, allowing the use of commercially available LAN cables (straight wiring). - No external power supply required. *It operates on power supplied from the DVI port of the video output device, but depending on the connected device, the available power may be insufficient, resulting in a shorter transmission distance. In this case, please connect using a USB to micro USB cable (sold separately) or connect a DC5V power adapter SWP051000-1S-PSE (sold separately) or LTE10UW-S1-BS33 (sold separately) to the included micro USB conversion cable.

• Other security systems
• Other PCs and OA equipment
• others

HS04 is an HDMI switcher that switches between four connected HDMI sources to one output. - Maximum resolution is 1920✕1200 or 1080p - Supports both video and audio signals - Compatible with HDMI 1.3a and HDCP - Includes power adapter and infrared remote control

• Other security systems

The HE02E transmits HDMI signals over LAN cables up to 100 meters. It can connect gaming consoles and Blu-ray players to AV amplifiers/HD TVs located at a distance. - Transmits HDMI over CAT5e/6/6a/7 UTP/STP cables up to 100 meters (CAT6 or higher recommended) - Set includes HE02ET (transmitter) and HE02ER (receiver), along with a power adapter - Both ends of the transmission cable can use commercially available LAN cables (straight wiring) with RJ45 connectors - Supports HDMI 1.4, capable of transmitting 3D and 4K at 30Hz - Compatible with HDCP 2.2/1.4 - Complies with HDBaseT standards * Please use CAT6 or higher cables when displaying video at 1080p 60Hz or higher. * To utilize the transmission performance of HDMI 1.4 (10.2Gbps), please use CAT6a or higher cables.

• Other commercial buildings and service facilities
• Other security systems
• others

The TTP111AV-K transmits composite video and stereo audio (LINE) over a single LAN cable for long-distance transmission. The model TTP111AV-K is a set of two video + audio transmitters "TTP111AV," which can be easily connected at both ends of the LAN cable (RJ45) for transmission. The transmitter is a passive type and does not require a power supply.

• Other security systems
• Other commercial buildings and service facilities
• others

- This is a high-sensitivity microphone with a built-in amplifier that operates on DC12V. - The microphone itself is integrated with a voice/power cable (440mm). - It can be easily added for installation and is ideal for security and business management applications.

• Other security systems

This is a cable for surveillance cameras that has a built-in small microphone. It can be used to connect the video and power (DC12V) of the surveillance camera. - It features a high-sensitivity microphone with a built-in amplifier that operates on DC12V. - It allows for audio output (LINE level) in addition to the video and power (DC12V) cable of the surveillance camera. - It is suitable for adding a microphone to an existing camera, among other uses. * The microphone operates using the camera's power supply (DC12V).

• Other security systems

The AD001H is a converter (up-scan converter) that converts composite video to VGA video. - Converts composite video to VGA (analog RGB) - Supports NTSC / PAL video signals - Equipped with loop output for input video - Features deinterlacing function - Brightness, contrast, saturation, and hue can be adjusted via OSD - Effective for displaying camera footage on a PC monitor

• Other security systems
• Other PCs and OA equipment
• others

VC01 is a down-scan converter that converts VGA (analog RGB) to composite (NTSC, etc.) video. - Supported standards are NTSC/PAL (switchable) - Input signal supports up to 1920×1200p at 60Hz. *In interlaced mode, part of the screen may be missing. - Equipped with a loop output for the video signal before conversion (VGA) - Configuration function via OSD - Output video can adjust horizontal/vertical size, brightness, contrast, saturation, hue, and sharpness.

• Other security systems
• Other PCs and OA equipment
• others

VGA/Analog/Digital Audio to HDMI Converter - Converts VGA (Analog RGB) and stereo audio (LINE) or digital audio (S/PDIF coaxial) to HDMI - Supported resolutions: 640x480, 800x600, 1024x768, 1280x960, 1280x1024, 1360x768, 1440x900, 1600x1200, 1920x1080 - Equipped with loop output for video/audio signals before conversion - Digital audio supports only 48k 16bit LPCM - Connection ports: VGA: Mini D-sub 15 female, Power: DC jack (Φ2.1✕5.5mm), Analog audio: Stereo mini jack, HDMI: Type A, S/PDIF coaxial: RCA female, S/PDIF optical: square - Power adapter included

• Other security systems
• Other PCs and OA equipment
• others

- Transmits VGA (analog RGB) up to 300m with a single CAT5e/6 cable - Maximum resolution is 1600✕1200 at 85Hz - Includes TTA111VGA-T (PC side), TTA111VGA-R (monitor side), and power adapter - Both ends of the transmission cable use RJ45, allowing for commercially available LAN cables (straight wiring) to be used (attach the included distance adjustment adapter at the midpoint and end of the wiring to accommodate differences in length between UTPs.) * If you cannot install the distance adjustment adapter in the wiring or if color misalignment persists even after installation, please use a cable with the same length for all four pairs or use the high-performance receiver VE02DALS with color misalignment correction function on the monitor side. (You can specify the combination of TTA111VGA-T (transmitter) + VE02DALS (high-performance receiver) when placing your order.) * If the resolution used is 1920✕1200 at 60Hz, please use the combination of VE02ALT (transmitter) + VE02DALS (receiver).

• Other security systems

Transmission using optical fiber supports long-distance transmission (up to 30 km) and is less susceptible to interference from surrounding noise sources. It enables the maintenance of signal quality in wiring across vast areas, long-distance wiring from remote locations, wiring in noisy factory environments, and wiring adjacent to power lines or signal lines that generate noise. Additionally, since transmission does not use electricity, it does not affect nearby devices that are susceptible to electromagnetic interference. Optical fiber cables can be connected using single-mode or multi-mode fibers, with ST connectors (various conversion connectors are also available). The VAD-D008R.L1.x transmits 8 channels of voltage/non-voltage contacts over single-mode fiber up to 30 km and multi-mode fiber up to 3 km. At the transmission destination, it outputs signals via non-voltage contact signals (relay output). Due to its card type design, it can be housed in a standalone installation case for installation in control panels or used in combination with multiple card types housed in a 19-inch rack mount chassis (optional).

• Other security systems
• Security Sensor Systems
• others

VAD-D403A.L1.T.235 /R.235 transmits four channels of composite video and RS232C/RS422/RS485 over a single optical fiber for long-distance multiplex transmission. The use of optical fiber allows for long-distance transmission (up to 30 km) and is less susceptible to interference from surrounding noise sources. It enables transmission while maintaining signal quality in wiring across vast areas, long-distance wiring from remote locations, wiring in noisy factory environments, and wiring adjacent to power lines or signal lines that generate noise. Additionally, it can be used in a wide temperature range of -20 to 75°C. The optical fiber is single-mode, and the connection terminal is an ST connector. (Please consult us if a conversion connector is needed.)

• Other security systems
• Security cameras and surveillance systems
• others

The 10/100M Ethernet signal is transmitted over optical fiber for long distances. Transmission using optical fiber supports long-distance transmission (up to 20 km) and is less susceptible to interference from surrounding noise sources. It enables the maintenance of signal quality in wiring across vast areas, long-distance wiring from remote locations, wiring in noisy factory environments, and wiring adjacent to power lines or signal lines that generate noise. Additionally, since transmission does not use electricity, it does not affect nearby devices that are susceptible to electromagnetic interference. The VAD-SD001E.L1.xxx transmits a single channel of 10/100M Ethernet over single-mode optical fiber up to 20 km and over multi-mode optical fiber up to 2 km, making it effective for LAN connections to remote locations. It operates within a temperature range of 0°C to 70°C, making it suitable for operation in harsh environments.

• Internet System
• Other PCs and OA equipment
• others

The 10/100M Ethernet signal is transmitted over optical fiber for long distances. Transmission using optical fiber supports long-distance transmission (up to 20 km) and is less susceptible to interference from surrounding noise sources. It enables wiring in vast areas, long-distance wiring from remote locations, wiring in noisy factory environments, and wiring adjacent to power lines or signal lines that generate noise while maintaining signal quality. Additionally, since transmission does not use electricity, it does not affect nearby devices that are susceptible to electromagnetic interference. The optical fiber supports single-mode/multi-mode, and the connection terminal is an SC connector. (Please consult us if conversion connectors are needed.) The VAD-SD001E.L2.TRC transmits one channel of 10/100M Ethernet over two single-mode optical fibers for a maximum of 20 km and over two multi-mode optical fibers for a maximum of 2 km. It is effective for LAN connections with remote locations. Two VAD-SD001E.L2.TRC units are used in opposition for transmission.

• Internet System
• Other security systems
• others

This is a module for converting RS232C to RS422/485, USB to RS232C/422/485, and an RS422/485 repeater. It can be mounted on a panel and DIN rail.

• Other security systems

This is an I/O module that acquires and outputs digital/analog signals from various sensors/switches. It can be mounted on a panel and DIN rail.

• Other security systems

- This is a repeater that enables a total transmission distance of 2,400m on both sides by re-extending RS422/485 signals. (EX9510 supports RS485 only) - It supports a communication speed of up to 115200bps. - The communication status can be checked by the blinking of an LED. - It operates with a power supply of DC10V to DC30V. (Power supply is not included) - Brackets for DIN rail mounting and panel mounting are included.

• Other security systems

- Converts RS232C TXD/RXD to RS422/485 and vice versa. (EX9520/R supports RS485 only) - Supports communication speeds of up to 115200bps. - The communication status can be confirmed by LED blinking. - Operates with a power supply of DC10V to DC30V. (Power supply not included) - Includes brackets for DIN rail mounting and panel mounting.

• Other security systems

By using this RF modulator AVM-138, you only need to prepare the necessary number of digital terrestrial tuners to display digital terrestrial programs on all existing analog TVs. (The picture quality is not high definition but at the level of conventional analog broadcasts.) Not only digital terrestrial broadcasts, but also the distribution of multiple camera images and DVD video/audio can be easily done with a single coaxial cable. The operation on a TV with an antenna cable connected is simply changing the channel as usual. There is no problem even with TVs that do not support CATV. VHF/UHF channels can also be set. Please use the "AVM-138" for easy RF conversion of composite video.

• Security cameras and surveillance systems

The video and audio are converted to RF and transmitted via coaxial cable. The DM-100S is an RF transmission demodulator that restores the video and audio (mono) transmitted after being modulated to RF into composite video signals and audio signals (line level). By changing the frequency channel used for RF conversion for each video, multiple videos can be transmitted over a single coaxial cable in combination with the MD-500 (RF transmission modulator). The mechanism is the same as that of cable television. Using this method, it is possible to transmit video and audio for up to approximately 60 channels over a single coaxial cable for distances of up to 250 to 800 meters (when using 5C-2V). (This varies depending on the frequency.)

• Other commercial buildings and service facilities
• Other security systems
• others

Composite video and audio are converted to RF and transmitted via coaxial cable. By changing the frequency channel used for this conversion for each video, multiple videos can be transmitted over a single coaxial cable. The mechanism is similar to that of cable television. Using this method, it is possible to transmit video and audio for up to approximately 60 channels over a single coaxial cable for distances of up to 250 to 800 meters (when using 5C-2V). (This varies depending on frequency, etc.) A dedicated demodulator, the "DM-100S," is used for demodulation.

• Other security systems

The twisted pair video transmitter can transmit camera images and other data using UTP cables such as LAN cables. It is thinner and more flexible than coaxial cable wiring, making installation easier. The passive type twisted pair transmitter does not require power and can transmit color video up to 300 meters. The TTP111VE converts composite video output (BNC) into a signal for twisted pair or converts a twisted pair signal back into a composite video signal (dual-purpose for both transmitting and receiving). The twisted pair side has a terminal block, allowing any twisted pair cable to be connected and used. It is compact and can be connected side by side even in areas where multiple BNC terminals, such as DVRs, are densely packed.

• Other security systems

Devices connected with metal cables may be damaged by high-voltage surges caused by induced lightning during a thunderstorm. The overcurrent protection device (surge protector) is designed to block induced lightning and protect the equipment. It is used by installing it at both ends of the long cable used for transmission. The SP006P is a surge protector for 10/100M networks that supports power transmission via PoE/PoE Plus. (The connection terminal is RJ45.) *"SP006P-K" is the model number for a set of two surge protectors "SP006P."

• Other security systems
• Lightning protection
• others

High voltage surges caused by induced lightning, such as from lightning strikes, can damage video equipment like cameras and DVRs. The surge protector is designed to block induced lightning that travels through this cable and protect the equipment. The SP001P is a surge protector for AC/DC power supplies. It allows currents of up to AC 40V and DC 56V to pass through. The power connection is made via a terminal block.

• Other security systems
• Lightning protection
• others

Lightning strikes can cause induced lightning to occur, which may damage video equipment such as surveillance cameras and DVRs. The surge protector is designed to block the induced lightning that travels through this cable and protect the equipment. It is used by attaching it to both ends of a long transmission cable used for transmission. The SP001VPD is a device that adds protection for signal lines (RS485, sensors, etc.) to the SP001VP (for video and power). It simultaneously protects video (AHD/HD-TVI/HDCVI/composite compatible), power, and signal lines. The connections for the signal lines and power lines are made via terminal blocks. - Control signals such as RS485 and contact signals (2-wire type) are protected. - The camera power can be used with a maximum of AC40V and DC56V (allowing power below AC40V and DC56V to pass through).

• Other security systems
• Security cameras and surveillance systems
• others

If a camera is installed in a location or building away from the monitor installation site, there may be cases where current flows through the video cable due to different potentials at each grounding point (ground loop). This ground loop not only allows current to flow but also introduces noise from nearby devices, causing distortion and noise. The device that interrupts this ground loop and restores clean video is called a ground loop isolator. The TGP001H is a low-loss type of video transformer that suppresses ground loop noise occurring when transmitting composite video using twisted pair cables. It is a product that adds the functionality of a twisted pair transmitter (passive type) to the GL001H designed for coaxial cables.

• Other security systems

High voltage surges caused by induced lightning, such as those from lightning strikes, can damage video equipment like cameras and DVRs. A surge protector is designed to block these high voltage surges, including induced lightning, that travel through this cable and protect the equipment. It is installed at both ends of the cable used for transmission. The SP001P-AC110 is a surge protector for AC 100V equipment such as surveillance cameras. The power connection is via a terminal block.

• Other security systems
• others
• Lightning protection

The "GB001" is a ground loop isolator that eliminates ground loops. It also features a video balancer function that stabilizes the balance of video signals, reducing noise in composite video caused by these issues. - Both ends are equipped with BNC male connectors for easy connection. *A BNC female to BNC female conversion connector is included. - It prevents distortion of video signals caused by ground loops. - It has a built-in balanced circuit that adjusts impedance, making it suitable for input to devices like DVRs. - It includes a transient current protection feature. - No power supply is required. *It is designed for composite video and does not support analog HD video signals. *It cannot be used if power is superimposed on the coaxial cable. *The operation of coaxial superimposed control signals (such as UTC) is not guaranteed.

• Other security systems

High voltage surges caused by induced lightning, such as from lightning strikes, can damage video equipment like cameras and DVRs. A surge protector is used to block induced lightning and protect the equipment. It is installed at both ends of a long transmission cable used for transmission. The SP001VP is a surge protector that can be used with AHD/HD-TVI/HDCVI/composite video and camera power. The camera power can handle a maximum of AC40V and DC56V (passing through power supplies below AC40V and DC56V).

• Other security systems
• Lightning protection
• others