Plumbing Products - メーカー・企業34社の製品一覧とランキング

Ultra-low temperature thermoelectric characteristics / resistivity / Hall measurement system 'HCT-100E'

Automatic simultaneous measurement of electrical resistance, Hall effect, and thermoelectric properties is possible! Achieved a wide range of temperature measurement!

A lightweight and compact magnetic field generation device capable of generating a magnetic field of 0.5T with a 40mm gap is adopted. It automatically controls the temperature-dependent measurements of electrical resistance, Hall effect, and thermoelectric properties, calculates electrical resistivity, Hall coefficient, carrier density, etc., and extracts data to Excel. Additionally, each measurement data is displayed in real-time with numerical values and graphs. 【Features】 ■ Wide range of temperature measurements from ultra-low temperature (4.2K) to room temperature (300K) ■ High-power refrigerator capable of cooling from the sample set to 4.2K in about 2.5 hours ■ External control of the refrigerator, temperature control, and bipolar power supply ■ Automatic simultaneous measurement of electrical resistance, Hall effect, and thermoelectric properties is possible *For more details, please refer to the PDF document or feel free to contact us.

企業：ハイブリッジ東京営業所
価格：Other

Other measuring instruments

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Approach to next-generation automotive products

We support the realization of a sustainable world by providing environmentally friendly products.

The Witz Engineering Group, leveraging its unique technologies and know-how cultivated not only in the automotive industry but also across various sectors, will continue to develop innovative and groundbreaking products such as piping, batteries, and thermal management solutions for motors aimed at next-generation vehicles. By providing environmentally conscious products, we support the realization of a sustainable world. *For more details, please feel free to contact us.*

企業：ウイツエンマンジャパン本社
価格：Other

others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Insulated Pipe "KWC Keep Warm Pipe"

Using rigid urethane foam! A thermal insulation pipe that demonstrates high performance even in harsh environments.

The "KWC Keep Warm Pipe" is an insulation pipe made from high-performance rigid polyurethane foam. All pipes and special-shaped pipes are assembled in the factory, which reduces labor on-site, shortens construction time, and ensures high reliability, allowing for easy and secure installation. Additionally, with a wide variety of pipe types and dimensions available, suitable combinations can be selected according to applications and usage conditions. 【Features】 ■ Exhibits high performance even in harsh environments ■ Uses rigid polyurethane foam with excellent insulation properties ■ Reduces labor on-site and shortens construction time ■ High reliability and enables easy and secure installation ■ Manufactured with high quality control, factory equipment, and technical expertise *For more details, please refer to the PDF document or feel free to contact us.

企業：千代田工業
価格：Other

Piping materials (copper pipes, cast iron pipes)

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Piping product "MC"

Easy to understand the remaining amount! Heating supply pipes with a polyethylene film protection on the outer surface, finished for aesthetics.

The "MC" is a piping product that is color-coded in two colors (blue and white) with twin pipes to prevent connection mistakes. It is suitable as a connection hot water pipe for underfloor heating in cold regions. The polyethylene film has a meter display, making it easy to see the remaining amount. We offer copper pipe sizes (outer diameter x wall thickness) such as "MC-3320S" with 9.52x0.6/9.52x0.6 and "MC-4420" with 12.7x0.64/12.7x0.64. 【Features】 ■ Soft copper pipe covered with high-foamed polyethylene insulation for double protection ■ The outer surface is protected by polyethylene film, making it an aesthetically pleasing hot water pipe for heating ■ Suitable as a connection hot water pipe for underfloor heating in cold regions ■ Twin pipes are color-coded in two colors (blue and white) to prevent connection mistakes ■ The polyethylene film has a meter display, making it easy to see the remaining amount *For more details, please feel free to contact us.

企業：桃陽電線
価格：Other

Piping materials (copper pipes, cast iron pipes)

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Instant automatic correction for uniform contact force in robot polishing! End effector AOK.

Equipping industrial robots with human-like tactile senses to automate sanding tasks with uniform pressure. This allows for reduced work time compared to high-speed corrections and dramatically improves cycle time.

Orbital sander kit using the unique ACT technology developed by FerRobotics Compliant Robot Technology GmbH. AOK200 Series Seeing is believing! Please check our website or YouTube (FerRobotics) for application example videos. The sanding process of skilled craftsmanship is fully controlled by the ACT technology, which instantaneously corrects the pressing force without issues related to dimensional variations, complex shapes, or loads at different angles, enabling complete automation of the sanding process at high speeds. Each parameter, including rotation speed, pressing force, and feed rate, can be independently controlled, achieving the best finish with 24-hour operation. Benefits: - Applicable to polishing, sanding, deburring, and cleaning processes. Dramatically improves cycle time, productivity, and efficiency. - Automates dangerous tasks (3K jobs). - Reduces the risk of factory shutdowns due to unforeseen circumstances caused by the COVID-19 pandemic. Materials: Compatible with a wide range of materials including iron, aluminum, titanium, magnesium, carbon, resin, wood, ceramics, coconut fiber, etc. Depending on the application and shape, it is possible to select the appropriate product from a rich lineup.

企業：FerRobotics Compliant Robot Technology GmbH 日本リモートオフィス
価格：Other

Outdoor stairs

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

A game changer in surface grinding automation! The new standard in robotic grinding.

We will not leave 3K jobs to the next generation of children. We will solve the shortage of skilled workers. Robot polishing that gives robots human-like senses through high-speed autonomous correction control of contact force.

FerRobotics' Active Compliant Technology automatically corrects the "difference" in contact pressure (force) generated during polishing and grinding processes, which require skilled techniques, at high speed. This technology enables consistent polishing/grinding at the set contact force, unaffected by variations in processing speed or gravitational load differences due to angles. Using an end effector (ACF) with ACT technology, the system rapidly and automatically adjusts to changes in the dimensional tolerances, curved shapes, and non-flat surfaces of the workpiece by instantly extending and retracting the stroke, maintaining contact with the workpiece at the set force. This technology can increase the speed of the device or robot's trajectory, thereby enhancing processing speed and improving cycle time. Additionally, in robotic polishing and grinding, the control of contact pressure through the extension and retraction of the ACF itself eliminates the need to move the heavy robot arm for corrections, further assisting in improving processing speed. Moreover, since it automatically corrects the tool load affected by gravity changes due to the robot's angle, it consistently maintains uniform contact pressure from any angle, enabling a finish without processing inconsistencies.

企業：FerRobotics Compliant Robot Technology GmbH 日本リモートオフィス
価格：Other

Outdoor stairs

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

FerRobotic's best solution for robotic polishing.

An end effector that enables automation systems for high-speed processing and high-quality finishing, allowing for the craftsmanship techniques (polishing, grinding) and hazardous tasks that have been given up until now.

FerRobotics' Active Compliant Technology automatically corrects the "difference" in contact pressure (force) that occurs during polishing and grinding processes, which require skilled techniques, at high speed. This technology allows for consistent polishing/grinding at the set contact force, unaffected by variations in processing speed or gravitational load differences due to angles. With the end effector (ACF) utilizing ACT technology, it quickly and automatically adjusts to changes in the dimensional tolerances, curved shapes, and non-flat surfaces of the workpiece by rapidly extending and retracting the stroke, maintaining contact with the workpiece at the set force. This technology can increase the speed of the equipment and robots' trajectories, thereby enhancing processing speed and improving cycle times. Additionally, in robotic polishing and grinding, the ACF controls the contact pressure through the extension and retraction of its stroke, eliminating the need to move the heavy robot arm for corrections, which further assists in improving the processing speed of robotic polishing. Moreover, since it automatically corrects tool load variations caused by gravity changes due to the robot's angle, it consistently maintains uniform contact pressure from any angle, enabling a finish without processing inconsistencies.

企業：FerRobotics Compliant Robot Technology GmbH 日本リモートオフィス
価格：Other

Specially equipped vehicles

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Improving management issues. Increasing profits for Farobotics through polishing automation.

Automation of the artisan's skills (polishing, grinding) and hazardous tasks, which have been given up until now, through high-speed autonomous control with contact force control. Dramatic improvements are expected in the end effector.

FerRobotics' Active Compliant Technology automatically corrects the "difference" in contact pressure (force) that occurs during polishing and grinding processes, which require skilled techniques, at high speed. This technology allows for consistent polishing/grinding at the set contact force without being affected by variations in processing speed or gravitational load differences due to angles. With the end effector (ACF) utilizing ACT technology, it instantly adjusts to changes in the dimensional tolerances, curved shapes, and non-flat surfaces of the workpiece by rapidly and automatically correcting through the expansion and contraction of the stroke, maintaining contact with the workpiece at the set force. This technology can increase the speed at which devices and robots move along their trajectories, thereby enhancing processing speed and improving cycle times. Additionally, in robotic polishing and grinding, the ACF itself controls the contact pressure through the expansion and contraction of its stroke, eliminating the need to move the heavy robotic arm for corrections, which further assists in improving the processing speed of robotic polishing. Furthermore, since it automatically corrects the tool load affected by gravity changes due to the robot's angle, it maintains a consistent contact pressure from any angle, enabling a finish without processing inconsistencies.

企業：FerRobotics Compliant Robot Technology GmbH 日本リモートオフィス
価格：Other

container

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Quickly, beautifully, and easily automate the polishing of woodworking products! Maximize corporate value.

Automate the artisan techniques (polishing, grinding) and hazardous tasks that have been given up until now by uniformly controlling the contact force on the workpiece with high-speed autonomous control. Experience a level of improvement that is inspiring.

It is a combination of ACF-K and an orbital sander. FerRobotics' Active Compliant Technology automatically corrects the "difference" in contact pressure (force) that occurs during processing at high speed, enabling consistent grinding and polishing at the set pressure, unaffected by variations in processing speed or gravitational load differences due to angles. Using the end effector (ACF) with ACT technology, it quickly and automatically adjusts to changes in the dimensional tolerances, curved shapes, and non-flat surfaces of the workpiece through instantaneous stroke extension and contraction, maintaining contact with the workpiece at the set force. This technology allows for increased speed along the paths of devices and robots, improving processing speed and cycle time. In robotic polishing, it controls the contact pressure through the extension and contraction of the ACF itself, eliminating the need to move the heavy robot arm for corrections, thus assisting in improving the processing speed of robotic polishing. Additionally, it automatically corrects tool load variations caused by changes in gravity due to the robot's angle, ensuring a consistent contact pressure from any angle and enabling a finish without processing inconsistencies.

企業：FerRobotics Compliant Robot Technology GmbH 日本リモートオフィス
価格：Other

Wood-based board

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Uniformity of pressing force enables robotic polishing of stainless steel food machinery.

Automating the artisan's skills (polishing, grinding), heavy labor, and hazardous tasks through uniform control of contact force with a high-speed autonomous control system. Inspiring improvement levels.

FerRobotics' Active Compliant Technology automatically corrects the "difference" in contact pressure (force) generated during polishing and grinding processes, which require skilled techniques, at high speed. This technology allows for consistent polishing/grinding at the set contact force, unaffected by variations in processing speed or gravitational load differences due to angles. With the end effector (ACF) utilizing ACT technology, it quickly and automatically compensates for changes in dimensional tolerances, curved shapes, and non-flat surfaces by instantly adjusting the stroke, maintaining contact with the workpiece at the set force. This technology can increase the speed of the device or robot's trajectory, thereby enhancing processing speed and improving cycle times. In robotic polishing, it controls the contact pressure through the expansion and contraction of the ACF's stroke, eliminating the need to move the heavy robot arm for corrections, which further assists in improving processing speed. Additionally, it automatically compensates for tool load variations caused by gravity due to the robot's angle, ensuring a consistent contact pressure from any angle and enabling a finish without processing inconsistencies.

企業：FerRobotics Compliant Robot Technology GmbH 日本リモートオフィス
価格：Other

Kids room equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Complete automation of painting repair polishing requiring ultra-fine force control using a double-header machine.

Automating the repair polishing of paint finishes that require highly skilled techniques. Significant reduction in cycle time using a double header with a high-speed autonomous correction control system for contact force.

FerRobotics' Active Compliant Technology automatically corrects the "difference" in contact pressure (force) that occurs during polishing and grinding processes, which require skilled techniques, at high speed. This technology allows for consistent polishing/grinding at the set contact force, unaffected by variations in processing speed or gravitational load differences due to angles. Using the patented ACT in the end effector (ACF), it quickly and automatically adjusts to changes in the dimensional tolerances, curved shapes, and non-flat surfaces of the workpiece by rapidly extending and retracting the stroke, maintaining contact with the workpiece at the set force. With a double-header design, it enables both sanding and polishing processes to be performed with a single unit, significantly improving cycle times. Additionally, in robotic polishing and grinding, the ACF controls the contact pressure by adjusting the stroke itself, eliminating the need to move the heavy robotic arm for corrections, which further assists in improving processing speed. Moreover, it automatically compensates for tool load variations caused by gravity changes due to the robot's angle, ensuring a consistent contact pressure from any angle and enabling a finish without processing inconsistencies.

企業：FerRobotics Compliant Robot Technology GmbH 日本リモートオフィス
価格：Other

Elevator

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Automatic polishing of molds is possible. High finishing quality is achieved with automatic pressure correction.

High-speed autonomous correction of contact force and autonomous correction of tool gravity load. By increasing the robot's trajectory speed, stable high-quality automatic polishing is possible with uniform force regardless of angle.

FerRobotics' Active Compliant Technology automatically corrects the "difference" in contact pressure (force) that occurs during processing in grinding and polishing, which require skilled techniques, against dimensional tolerances, curved shapes, and non-flat surfaces at high speed. It also automatically compensates for gravitational loads, allowing for consistent grinding/polishing with a set contact force. This technology can increase the speed at which devices and robots move along their trajectories, thereby improving processing speed and cycle time. Additionally, in robotic polishing and grinding, the ACF itself controls the contact pressure by adjusting its stroke, eliminating the need to move the heavy robotic arm for corrections, which further assists in improving the processing speed of robotic polishing. Furthermore, it automatically compensates for tool loads due to gravity, which changes with the angle of the robot, ensuring a consistent contact pressure from any angle and enabling a finish without processing inconsistencies. Seeing is believing! Please check our website or YouTube (FerRobotics) for application example videos.

企業：FerRobotics Compliant Robot Technology GmbH 日本リモートオフィス
価格：Other

Specially equipped vehicles

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Polishing of carbon materials with short cycle times and high-quality finishing through automation.

High-speed autonomous correction of contact force and autonomous correction of gravitational load. This enables an increase in robot trajectory speed and allows for high-quality, stable automatic polishing with uniform force from any angle.

FerRobotics' Active Compliant Technology automatically corrects the "difference" in contact pressure (force) that occurs during processing in grinding and polishing, which require skilled techniques, in response to dimensional tolerances, curved shapes, and non-planar surfaces of the workpiece, at high speed. It also automatically compensates for gravitational loads, allowing for consistent grinding/polishing with a set contact force. This technology can increase the speed of the device or robot's trajectory, thereby enhancing processing speed and improving cycle time. Additionally, in robotic polishing and grinding, the control of contact pressure through the expansion and contraction of the ACF itself eliminates the need to move the heavy robot arm for corrections, further assisting in improving the processing speed of robotic polishing. Furthermore, it automatically compensates for tool load variations due to gravity changes based on the robot's angle, ensuring a consistent contact pressure from any angle and enabling a finish without processing inconsistencies. Seeing is believing! Please check our website or YouTube (FerRobotics) for application example videos.

企業：FerRobotics Compliant Robot Technology GmbH 日本リモートオフィス
価格：Other

Outdoor stairs

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

An end effector that enables the automation of removing welding beads with artisan techniques.

Automation of weld bead removal using skilled craftsmanship. Instant automatic correction control of the most important pressure (applied force) for polishing, allowing for uniform pressure during processing. Reduction of cycle time.

Orbital polishing kit using the unique ACT technology developed by FerRobotics Compliant Robot Technology GmbH. ACT automatically corrects the "difference" in contact pressure (force) that occurs during processing in grinding and polishing operations, which require skilled techniques, in response to dimensional tolerances, curved shapes, and non-planar surfaces, at high speed. It also automatically corrects for gravitational load, allowing for consistent polishing/grinding at the set contact force. This technology can increase the speed at which devices and robots move along their paths, thereby improving processing speed and cycle time. Additionally, in robotic polishing and grinding, the control of contact pressure through the expansion and contraction of the ACF itself means there is no need to move the heavy robot arm for corrections, which further assists in improving processing speed. Furthermore, since it automatically corrects for tool load due to gravity, which changes with the angle of the robot, it maintains a uniform contact pressure from any angle, enabling a finish without processing inconsistencies. A picture is worth a thousand words! Please check our website or YouTube (FerRobotics) for application example videos.

企業：FerRobotics Compliant Robot Technology GmbH 日本リモートオフィス
価格：Other

Specially equipped vehicles

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Quick and easy tool change. Automation of multi-purpose skilled work polishing is fast and clean.

The end effector inherits the craftsmanship. It automatically adjusts the pressure (applied force) for polishing in an instant, compensating for angles and workpiece warping, and achieves uniform pressure through automation with robots.

FerRobotics Compliant Robot Technology GmbH has developed the ACF-K series, which focuses on collaborative robots using its unique ACT technology. It allows for easy exchange of hand tools such as orbital sanders, angle grinders, die grinders, and belt grinders. The series can accommodate various applications by replacing hand tools, enabling the automation of grinding and polishing processes without compromise. Seeing is believing! Please check our website or YouTube (FerRobotics) for example videos of applications. The ACT technology enables the automation of grinding and polishing processes, which have been considered difficult to automate, by automatically correcting load based on dimensional variations and angles of the workpiece, completely controlling the pressing force. It is applicable to surface processing tasks such as buff polishing, sanding, weld bead removal, deburring, scale removal, and paint stripping. This significantly improves production speed while maintaining high-quality standards. Benefits (Value Creation): - Tasks that can be performed by robots are assigned to robots, allowing human employees to be reassigned to creative work that only humans can do. - High-quality work with high reproducibility can be performed 24/7, 365 days a year.

企業：FerRobotics Compliant Robot Technology GmbH 日本リモートオフィス
価格：Other

Specially equipped vehicles

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Plumbing Products - メーカー・企業34社の製品一覧とランキング

Plumbing Productsのメーカー・企業ランキング

Plumbing Productsの製品ランキング

Plumbing Productsの製品一覧

Ultra-low temperature thermoelectric characteristics / resistivity / Hall measurement system 'HCT-100E'

Approach to next-generation automotive products

Insulated Pipe "KWC Keep Warm Pipe"

Piping product "MC"

Instant automatic correction for uniform contact force in robot polishing! End effector AOK.

A game changer in surface grinding automation! The new standard in robotic grinding.

FerRobotic's best solution for robotic polishing.

Improving management issues. Increasing profits for Farobotics through polishing automation.

Quickly, beautifully, and easily automate the polishing of woodworking products! Maximize corporate value.

Uniformity of pressing force enables robotic polishing of stainless steel food machinery.

Complete automation of painting repair polishing requiring ultra-fine force control using a double-header machine.

Automatic polishing of molds is possible. High finishing quality is achieved with automatic pressure correction.

Polishing of carbon materials with short cycle times and high-quality finishing through automation.

An end effector that enables the automation of removing welding beads with artisan techniques.

Quick and easy tool change. Automation of multi-purpose skilled work polishing is fast and clean.