coating Product List and Ranking from 342 Manufacturers, Suppliers and Companies

[Case Study] Surface treatment that combines "slipperiness" and "wear resistance"

A case study that was able to reduce maintenance work for replacements due to high durability.

This is a case study from a company that manufactures soft packaging materials (packaging). They were experiencing issues with Teflon tape used on the transport guide of processing machines for transporting products, as it would stick to the products and required frequent replacement. Therefore, we proposed an additional DLC treatment after blast processing. This surface treatment, which excels in slip resistance and wear resistance, is very hard and has a low friction coefficient, allowing for smooth transport of the film and high durability, ensuring long-lasting slip performance. By applying DLC treatment on top of the blast processing, the film of the product was transported smoothly, and maintenance work for tape replacement was reduced due to its high durability. [Issues] - The friction coefficient was higher than that of the Teflon tape in use, causing friction resistance and preventing smooth transport. - Although we tried reducing the contact area with blast processing, it resulted in scratches on the product's film. *For more details, please refer to the PDF document or feel free to contact us.

Company：蒲田工業
Price：Other

others
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Surface treatment: Fluororesin coating (chemical resistance, slip properties, non-stick properties)

Fluororesin coating (chemical resistance, slip properties, non-stick properties, insulation, heat resistance)

■Outstanding Features It has excellent resistance to all acids and alkalis. It has the second lowest surface friction coefficient of any material on Earth, following ice, and exhibits excellent slip properties. It also excels in non-stick properties, insulation, and heat resistance.

Company：蒲田工業
Price：Other

others
coating

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Surface treatment: Micro-dimple + polymerization reaction thin film fluorine-based coating

[Composite Processing] Improved Slipperiness: Micro-Dimple Treatment + Polymer Reaction Thin Film Fluorine-Based Coating (Slipperiness, Adhesion)

■Excellent features Slip resistance, non-stick, adhesion, water repellency

Company：蒲田工業
Price：Other

others
coating

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

UV　フローリング　コーティング

施工後10年保証のUVフローリングコーティング！

これからの新しいフローリングのコーティングは、UVフロアコーティング　お手入れ楽々、経済的、高い耐久性、耐水性、耐酸性、耐熱性、ECO、安心の10年間保証、

Company：東美化学
Price：Other

Engineered Flooring
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Conductive Diamond Coating [Video Available]

Would you like to try depositing diamonds? We support everything from prototyping to mass production! We have also started selling standard conductive diamond electrodes.

Diamond is an insulator, but it can acquire conductivity by doping with boron. We will uniformly deposit conductive diamond over a large area while maintaining the chemical stability and strength of diamond. Diamond electrodes have a wide potential window, allowing for the decomposition and synthesis of difficult-to-decompose substances through oxidation and reduction reactions. By electrolyzing tap water with diamond electrodes, it is possible to directly produce high-concentration ozone water. Additionally, our unique pre-treatment for film formation improves the adhesion of the diamond film. *For more details, please contact us or download and view the catalog.

Company：松尾産業東京支店
Price：Other

Welfare and medical equipment
coating

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

OF coat (6nm release and non-stick coating)

Birth of a release/non-stick coating for thin films

A non-stick coating has been developed that combines release properties and water repellency comparable to fluoropolymer processing (tetrafluoroethylene resin). It is effective against adhesion from adhesives, glues, and molten plastics.

Company：ツール・テック東北
Price：Other

Heating and cooling equipment and facilities
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Powder ceramic coating roller

Powder ceramic coating roller with an environmentally friendly coating treatment.

◆ Since it is a dry method, it does not use any volatile organic solvents, making it an environmentally friendly coating roller. ◆ It has excellent wear resistance and durability. ◆ The grip can be adjusted by changing the particle size of the ceramic powder.

Company：トーヨーテクノ
Price：Other

others
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Transport Coating Roller Comprehensive Catalog

A lineup of five types of coating rollers: "urethane," "beads," "powder ceramic," "ceramic," and "silicone"!

It is possible to change the coating material depending on the intended use. Various properties such as wear resistance, durability, grip adjustment, precise feeding accuracy, and prevention of ink and paper dust adhesion can be modified for different purposes. It is suitable for feeding rollers and drive rotors of OA equipment such as printers, copiers, FAX machines, and plotters. ◇◆◆◇◆━━━━━━━━━━━━━━━━━━━━━━━━━ For more details, please download the catalog and take a look. Alternatively, feel free to contact us. ━━━━━━━━━━━━━━━━━━━━━━━━━◇◆◆◇◆

Company：トーヨーテクノ
Price：Other

others
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Coating functional paint powder ceramic coating roller

It is a coating roller that excels in abrasion resistance, durability, and is environmentally friendly.

Conventional ceramic coatings were processed using spraying and adhesion, but with powder, we can utilize the performance of traditional ceramic coating rollers while also providing an environmentally friendly coating treatment. Since it uses a dry method, it does not use any volatile organic solvents, making it an eco-friendly coating roller. It excels in wear resistance and durability. Additionally, by changing the particle size of the ceramic powder, the grip can be adjusted. For more details, please contact us or refer to the catalog.

Company：トーヨーテクノ
Price：Other

Work tools
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Introduction to Thin Film Coating Processing Technology

Thin film coating that can coat most metals, metal oxides, and dielectric films!

Our company offers film deposition processing using PVD techniques, including resistance heating vacuum deposition, EB heating vacuum deposition, and sputtering methods. By utilizing these processing technologies, we can coat almost all metals, metal oxides, and dielectric films. Please feel free to consult us if you have any requests. 【Features】 ■ Film deposition processing is possible using resistance heating vacuum deposition, EB heating vacuum deposition, and sputtering methods. ■ Coating of almost all metals, metal oxides, and dielectric films is possible. *For more details, please refer to the catalog or feel free to contact us.

Company：フォトプレシジョン
Price：Other

others
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Non-Tuck Future

Non-silicone non-stick coating

Non-tack future is a new surface treatment method for non-stick applications that does not require knurling or thermal spraying on metal surfaces. It is a non-silicone, non-stick coating that allows for the same treatment even when thin film metal materials or high-temperature heat treatment are not possible.

Company：都ローラー工業
Price：Other

Building renovation system
Other interior and exterior systems and units
coating

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Roll coating process "Functional DLC Coating"

Improved chemical resistance and corrosion resistance! Coating is also performed on items other than rolls.

"Functional DLC Coating" provides static electricity prevention, dirt resistance, wrinkle prevention, and improved hydrophilicity. It can be used for various types of transport rolls, stretching rolls, and rolling rolls. The maximum processing size is 300φ×2500L×2800TL (MAX 350kg). Additionally, we offer various coating treatments in a vacuum furnace, including "Room Temperature DLC Coating" and "Various Hard Thin Film Coatings." [Features] ■ Low friction coefficient: 0.2 or less ■ High hardness ■ Wear resistance: DLC (MAX 2200HV) ■ Scratch prevention measures (hard film compared to HCr) ■ Alternative to fluororesin coated rolls (higher hardness than fluororesin coating) *For more details, please refer to the PDF document or feel free to contact us.

Company：都ローラー工業
Price：Other

others
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

TS coat graffiti prevention coating

Forms a film that allows for easy removal of dirt and graffiti with a coating.

TS Coat is a 100% inorganic single-component solvent that forms a film when coated on various substrates such as concrete, mortar, and slate, making it easy to remove dirt and graffiti. It demonstrates excellent effectiveness against graffiti. Additionally, it is possible to provide protective coatings for cute illustrations. For more details, please contact us.

Company：シクソン
Price：Other

Bridge Construction
Other civil engineering works
Plastering and painting work
coating

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-performance PVD coating "AS-F COAT"

Recommended for long products, plating alternatives, release agent measures, and corrosion prevention!

The high-performance PVD coating "AS-F COAT" is a coating product developed based on our long-standing expertise in materials, heat treatment, and coating to meet customer needs. 【Features】 ■ Ultra corrosion resistance (amorphous structure) ■ High wear resistance (HV1300-1500) ■ High adhesion (over 100N (high-speed steel)) ■ High lubrication and high release (smooth surface structure) ■ Low-temperature treatment (no dimensional changes, compatible with various substrates) Our staff, who possess expertise in all aspects, will assist you in improving the lifespan of the molds and parts you handle! *For more details, please contact us or download the PDF document to view.

Company：浅井産業
Price：Other

Renovation and repair methods
Special Construction Method
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Release, corrosion, and wear-resistant coating

Numerous applications in powder molding dies and resin molded parts! Introducing corrosion protection using AS-F coating.

We propose corrosion protection using our original development film "AS-F Coat." In a comparison of surface treatments conducted through high-temperature salt spray testing, "AS-F Coat" showed no signs of corrosion after 18 hours, while "hard chrome plating" exhibited corrosion progression within the same timeframe. The surface treatment provided by this product not only improves mold release properties, leading to reduced takt time, but also enhances mold lifespan due to its gas corrosion prevention effect, making it a recommended alternative to plating. 【Features】 ■ Improved takt time due to enhanced mold release properties ■ Increased mold lifespan due to gas corrosion prevention effect ■ Extended product lifespan due to wear resistance ■ Applicable to friction reduction components *For more details, please refer to the PDF document or feel free to contact us.

Company：浅井産業
Price：Other

Special Construction Method
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

AS-F coating for resin molding

We solve your problems! AS-F coating for resin molding using our in-house developed equipment.

Our company offers "AS-F Coating" for resin molding. Using our in-house developed equipment, we create a film structure based on elements that are particularly strong in resin molding, manage the flow of inert gas in seconds, and simultaneously achieve non-adhesion, corrosion resistance, and long-lasting durability. We solve problems such as the difficulty of changing maintenance for screws. Please feel free to contact us. It can also be used for rubber molding. 【Features】 ■ Corrosion prevention from generated gases ■ Super barrier coating that prevents resin adhesion ■ Processing possible up to 2 meters ■ Cost reduction with a long-length dedicated furnace ■ Micro-dimple structure that enhances resin fluidity *For more details, please refer to the PDF materials or feel free to contact us.

Company：浅井産業
Price：Other

Special Construction Method
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

AS-F coating for powder molding

We solve your problems! AS-F coating for powder molding using our in-house developed equipment.

Our company offers "AS-F Coating" for powder molding. Using our in-house developed equipment, we create a film structure based on elements that are particularly strong against powders, and by managing the flow of inert gas in seconds, we have simultaneously achieved non-adhesion, corrosion resistance, and long-lasting durability. We solve problems such as powder sticking to molds, leading to molding defects. Please feel free to contact us. 【Features】 ■ Release properties that prevent powder residue in molds ■ Durability improvement with hardness twice that of hard Cr plating ■ Film thickness controllable at the micron level ■ Super amorphous layer that prevents adhesion ■ Smooth surfaces with fewer defects *For more details, please refer to the PDF document or feel free to contact us.

Company：浅井産業
Price：Other

Special Construction Method
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Information] Choosing a Disappointing Surface Treatment: Film Type Selection Edition

Various methods and types of surface treatment are available. A correlation chart showing the characteristics of each type of film is included. Free coating is currently being offered.

"Is the surface treatment we are currently using suitable?" "Is there a better surface treatment available?" "Which surface treatment is best for this problem?" For those who are wondering, we propose the appropriate surface treatments with (purpose-specific options such as release, wear resistance, sliding, corrosion resistance, etc.) and (correlation diagrams of each film type). Please feel free to download and take a look. [Contents] ■ Purpose of surface treatments ■ Correlation diagrams of each film type ■ Summary ■ Proposal for ASF films *For more details, please refer to the PDF document or feel free to contact us.

Company：浅井産業
Price：Other

Renovation and repair methods
others
Processing Technology
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

AS-F Coating for Stable and Safe Operations

To companies using medical devices, pharmaceutical manufacturing machines, and plating! AS-F coating for stable and safe operations.

Medical devices and pharmaceutical manufacturing equipment are often used in environments where corrosion and adhesion occur, leading to issues such as equipment components not functioning properly and the equipment itself becoming unstable. Our developed film, 'AS-F', has received rigorous evaluations from customers and has been proven to solve these problems, being adopted in many jigs and molds. Improved release properties, durability, and corrosion resistance. There are numerous case studies of trouble resolution. Companies using medical devices, pharmaceutical manufacturing equipment, or plating are encouraged to consider this. Additionally, inquiries made by October 20, 2021, will receive a free prototype. For more details, please refer to the PDF materials. [Features] - Adhesion prevention - Improved release properties - Increased durability - Enhanced corrosion resistance - Safe components *For more details, please refer to the PDF materials or feel free to contact us.

Company：浅井産業
Price：Other

Safety and consumables
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Custom-made PVD Coating

We propose PVD coatings that meet your needs and challenges. Achieving thick and high-hardness film formation. Various applications for parts, materials, and molds.

Our company specializes in "PVD coating," which is useful for corrosion and wear prevention of parts and molds, as well as improving release properties. We offer custom-made thick film deposition up to 50μm. By adopting a new type of evaporation source, we have achieved hard thick film molding. This expands the range of applications and further enhances wear resistance and durability. 【Effects and Examples of Applications】 ◎ Improved erosion resistance Example applications: Impellers, outboard motors, pumps, screws ◎ Improved cavitation resistance Example applications: Blades, pumps, water jets ◎ Improved sand wear resistance Example applications: Molds, conveyors, gears, jigs *For more details, please refer to the materials. Feel free to contact us with any inquiries.

Company：浅井産業
Price：Other

others
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Comprehensive Coating Solutions

Recommended for companies engaged in harsh mold processing (cold forging, pressing, forming)!

We would like to introduce our "All-Around Coating Solutions." There are various types of coatings used for different purposes. However, there is no single film that meets all purposes. Therefore, it is necessary to select the optimal film for each application. As a coating manufacturer, we not only provide our own films but also, as a comprehensive coating trading company, we propose the most suitable films from all angles. 【Features】 ■ PVD coating with high wear resistance, adhesion, and heat resistance ■ High release properties (Biomimetics BIOMEMETICS film) ■ High corrosion resistance ■ Long-length processing equipment capable of handling 2m ■ Minimal substrate impact due to low-temperature processing below 200°C = capable of forming films on aluminum and copper *For more details, please refer to the PDF document or feel free to contact us.

Company：浅井産業
Price：Other

Reinforcement and repair materials
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Floor coating agent, UV coating agent, UFH coat

UV coating agent 'UFH Coat' ideal for chemical flooring and flooring.

Daily maintenance is just cleaning! The optimal UV coating agent for chemical flooring and hardwood floors, 'UFH Coat' ■□■ Features ■□■ ■ Heel marks and dirt are hard to adhere, and even if they do get dirty, they can be easily wiped off. ■ You can expect a clean and aesthetically pleasing floor, which is highly durable and resistant to scratches. ■ There is no need for waxing or wax stripping work, thus preventing environmental damage from the use of stripping agents. ■ There is no discoloration of the coating film, and it prevents fading of the flooring material. ■ Daily management requires only dust control and damp mopping. ■ The initial installation time, including the stripping of existing wax, is no different from the time required for conventional cleaning tasks. Furthermore, monthly maintenance only involves regular cleaning, and even including the restoration work when gloss decreases, the annual working time is halved. ■ Recoating maintenance due to wear can be easily performed. Since the wear condition varies depending on the frequency of foot traffic and the environment, the timing for recoating maintenance will be judged separately (typically about once every six months to three years). ■ Cost reduction for floor maintenance can be expected. ■ For more details, please contact us.

Company：十條ケミコ
Price：Other

Flooring deterioration prevention agents (wax, etc.)
Exterior tiles
Interior and exterior tiles
coating

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fully automatic dip coater for pattern resist application FA-0406

Automatic dip coater for pattern resist application. Achieves precise resist coating on large area substrates with fully automated control.

This device is a fully automatic dip coater (dip coating) that continuously dip coats, dries, and cools a pattern resist as a substitute for dry film on a flat copper plate in the printed circuit board manufacturing process. It is compatible with substrates measuring 650mm in stroke and W620×H510×t1.6mm. With fully automatic control, it achieves uniform and highly reproducible resist application, making it ideal for photolithography processes. The design is optimized to enhance productivity by streamlining the processing of large-area substrates.

Company：ＳＤＩ京都本社
Price：Other

others
Manufacturing Equipment
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Contract Coating Service

Innovative contract coating solutions, professionals in coating.

Our contract coating business, centered around our dip coating equipment, offers an excellent choice as professionals in coating. Our strength lies in our integrated approach to a wide range of contract coating services. Our dip coater boasts one of the largest ranges of motion and speed in the industry, making it suitable for a variety of applications from fine coatings to large-scale manufacturing. This enables us to provide high-quality coatings in fields such as nanotechnology, semiconductors, biomedicine, optics, and materials science. We also own ancillary equipment such as vacuum plasma cleaning devices and constant temperature and humidity dryers, optimizing the processes before and after coating. This enhances the uniformity and durability of the coatings, strictly meeting our customers' requirements. We provide custom coating solutions tailored to our customers' specifications, contributing to improved product performance and enhanced competitiveness. Our high quality, flexibility, efficiency, and extensive experience across various industries set our services apart as an excellent choice compared to others. Let's realize the technological evolution for the future together.

Company：ＳＤＩ京都本社
Price：10,000 yen-100,000 yen

others
Manufacturing Equipment
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Nano Incoater (Release Agent Coating Device) NIC-1103

6 to 8 inch board compatible, versatile medium-sized nano coater (release agent application device)

This device is designed to apply a release agent to a maximum 8-inch wafer through the processes of coating, rinsing, and drying, thereby ensuring the release agent adheres to the work surface. The processing is done one workpiece at a time. It is a dip coater-type device that reflects the dip coating technology owned by SDI. It has a stroke of 250mm and is compatible with sizes ranging from 6 to 8 inches. It can uniformly coat medium-sized substrates and is suitable for small lot production and prototyping processes. It achieves high-quality film formation and allows for highly reproducible processing. *For more details, please download the catalog or contact us.*

Company：ＳＤＩ京都本社
Price：1 million yen-5 million yen

Manufacturing Equipment
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Printed Circuit Board Coating Device SA-1210

Forming a uniform protective film with dedicated design for printed circuit boards.

This device is an automatic dip coater that picks up three printed circuit boards set in a dedicated cassette simultaneously, dips them in a specialized dip coating liquid, and after drying, stores them back in the dedicated cassette. It accommodates a stroke of 185mm and is suitable for 150mm square boards. Optimized for printed circuit boards, it can uniformly coat flux and protective films. With precise control, it supports processes that enhance the durability and reliability of electronic components.

Company：ＳＤＩ京都本社
Price：10 million yen-50 million yen

others
Manufacturing Equipment
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Linear Dip Coater LD-1304-S2

Developed a completely new control method to change the dip speed linearly.

This is a revolutionary dip coater that uses an entirely new control method to adjust the speed linearly and change the film thickness smoothly and easily for dip coating. The variable speed range is ultra-wide, from 0.1 mm/sec to 200 mm/sec. Of course, the functions available in conventional models can also be switched with a single touch. --------------------------------------------- Currently, a video introduction is available on our website. ---------------------------------------------

Company：ＳＤＩ京都本社
Price：1 million yen-5 million yen

Manufacturing Equipment
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Hard coat material coating device HC-1004

Uniform application of hard coat material achieves excellent durability in film formation.

This device is a semi-automatic dip coater (dip coating) designed for the automation of cleaning polycarbonate sheets after injection molding, dip coating with hard coat material, hot air drying, and UV curing. It is a hard coat dedicated device that accommodates substrates with a stroke of 215mm and dimensions of W116×H112×t1.0–3.5mm. With high precision control, it can uniformly apply hard coating materials, ensuring stability and reproducibility of film thickness. It is suitable for applications that enhance wear resistance and scratch resistance, and is designed to be implementable in mass production processes.

Company：ＳＤＩ京都本社
Price：Other

Manufacturing Equipment
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Long Object Dip Coater DT-1303-S1

Ideal for long rod-shaped workpieces (up to 780mm). The tank slides. A dedicated dip coater that accommodates long materials and rod-shaped samples.

This is a dip coater for dip coating (dip coating) rod-shaped long items (under 780mm) such as catheters and glass tubes. When suspending the workpiece, the tank slides to make it easier to hang the workpiece. Additionally, during equipment installation, the vertical drive unit slides, allowing the height of the device to be reduced from 2100mm to 1500mm. (The tank is sold separately.) For more details, please contact us. The dip coater for long items is designed to accommodate a stroke of 780mm and a minimum speed of 1mm/sec, efficiently coating rod-shaped and long materials. With a design optimized for long shapes, it ensures a uniform film thickness and is suitable for a wide range of applications from research and development to prototype evaluation.

Company：ＳＤＩ京都本社
Price：Other

others
Manufacturing Equipment
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Gas Replacement Box Integrated Nano Coater NIC-1109G

Gas replacement box integrated nano coater (release agent application device)

This device is an integrated unit consisting of a BOX with a gas replacement function using nitrogen and a nano coater (release agent application device). It processes quartz glass with dimensions up to 152mm × 152mm and a thickness of 6.0mm through ultrasonic cleaning, release agent application, rinse cleaning, and fixation drying, thereby applying the release agent to the work surface. The processing is done one workpiece at a time. It is a dip coater-type device that reflects the dip coating technology owned by SDI. The nano coater is a trademark of SDI. For more details, please contact us.

Company：ＳＤＩ京都本社
Price：Other

others
Manufacturing Equipment
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

coating Product List and Ranking from 342 Manufacturers, Suppliers and Companies | IPROS

coating Manufacturer, Suppliers and Company Rankings

coating Product ranking