Construction method Product List and Ranking from 1591 Manufacturers, Suppliers and Companies | IPROS

Last Updated： Aggregation Period:Mar 04, 2026～Mar 31, 2026
This ranking is based on the number of page views on our site.

Construction method Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Mar 04, 2026～Mar 31, 2026
This ranking is based on the number of page views on our site.

  1. TRAWE main office Saitama//Other construction industries
  2. Taiyo Kisokogyo Co.,Ltd. Aichi//General contractors and subcontractors
  3. エルニード協会 Kagawa//Other construction industries
  4. 4 null/null
  5. 5 シーカ・ジャパン Tokyo//Building materials, supplies and fixtures manufacturers
Go to Company Ranking

Construction method Product ranking

Last Updated： Aggregation Period:Mar 04, 2026～Mar 31, 2026
This ranking is based on the number of page views on our site.

  1. 建物外壁工事　ロープアクセス工法 TRAWE main office
  2. Hybrid Concrete Reinforcement Method "Solid Remain Alpha"
  3. Install the valve without stopping the water! 'EM Continuous Water Valve Method' 水研
  4. 4 Reinforcement of existing beam after hole cutting: "Redouble Method" コンステック
  5. 5 Roof renovation robot method ハマキャスト

Construction method Product List

1111～1140 item / All 4279 items

Displayed results
DK drain pipe

DK drain pipe

Stainless steel and resistant to rust! A drain pipe that can reduce lifecycle costs.

This product is a driven drainage pipe made of stainless steel, designed to be driven into the ground with threaded ends (male and female) to drain and lower groundwater within the soil, preventing slope collapse. Unlike conventional drainage pipes that require drilling before inserting the pipe, this product allows for direct installation by striking the tip bit into the ground. Since pre-drilling is not necessary, drainage pipes can be installed using the same equipment during the construction of rock bolts, improving workability and cost-effectiveness. 【Features】 - Made of stainless steel, resistant to rust - Striking the tip bit increases driving power - Improved durability and cost-effectiveness - Possible reduction in lifecycle costs - Enhanced workability *For more details, please refer to the PDF document or feel free to contact us.

  • Civil Engineering Method
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mihosaka Pile Weaving Co., Ltd. Pile Fabric Products and Technology Collection

Mihosaka Pile Weaving Co., Ltd. Pile Fabric Products and Technology Collection

High-quality textiles that connect to the world! Introducing traditional techniques and pile fabric products!

Textiles are a general term for fabric products made by interlacing warp (vertical threads) and weft (horizontal threads). Pile fabrics are those in which hair-like or looped threads protrude from the surface of the fabric. Pile fabrics can be classified into several types based on differences in manufacturing methods, each having distinct characteristics. Fabric is created by inserting (weaving) the weft threads between the intersecting warp threads. This part serves as the base material to hold the pile and is referred to as the "base fabric" or "ground." By arbitrarily changing the material, thickness, length, tufting interval, and tufting shape of the pile, the characteristics of pile fabrics can be varied for a wide range of applications. Their uses are diverse, including cleaning delicate items, filling gaps, dust prevention, filtration, cushioning, thermal insulation, and water retention. [Examples of products made with pile fabric technology] ■ Industrial brush fabric ■ Geotextiles for construction applications ■ Cushioning pile fabric for medical use *For more details, please download the catalog.

  • others
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Reinforcement method using single-sided backing plates with high-strength stud bolts.

Reinforcement method using single-sided backing plates with high-strength stud bolts.

We are working on improving the construction efficiency and quality of the bottom plate reinforcement method for fatigue damage in the welded joints of steel deck plates and U-ribs.

The "high-strength stud bolt" (equivalent to F8T) is a stud bolt suitable for one-sided construction applicable to friction joints. It can be used for joining members of steel structures and reinforcing against corrosion and fatigue damage with backing plates. Additionally, to ensure the quality and shape of stud welding on the underside of steel deck plates, a "stud upward welding system" has been developed. This system consists of an "upward stud welding device," "support rails," "templates," and "welding monitoring equipment." [Features of High-Strength Stud Bolts] ■ Reinforcement of members with closed sections or those with pavement/concrete on the back can be performed from one side only. ■ No drilling is required, preventing damage to existing members and avoiding a decrease in load-bearing capacity. ■ As a high-strength stud bolt for friction joints, it ensures the strength of bolt grade F8T. ■ With fastening tools for high-strength bolts, the specified bolt axial force can be reliably applied. ■ Patent number: 6556490 *For more details, please refer to the PDF document or feel free to contact us.

  • Subsidiary materials
  • Reinforcement and repair materials
  • Other earthworks, foundation works, and exterior floors
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Construction method "Mini Anchor Method"

Construction method "Mini Anchor Method"

A new slope reinforcement technology using advanced large-scale reinforcement materials!

The "Mini Anchor Method" is a type of reinforced soil construction method using rebar insertion. By using a reinforcement material called "mini anchor," which has a structure that allows the tip to be enlarged after insertion into the ground instead of using rebar, safety of the ground is ensured, particularly effective for application in areas with strict site boundaries. Additionally, it can apply prestress to the ground, enhancing the integration of the reinforced area and contributing to safety. 【Features】 ■ The length of the reinforcement material can be shortened, resulting in a smaller construction impact area. ■ Advantageous in cases where intrusion into site boundaries is a concern. ■ If the length is the same as rebar, a wider spacing can be achieved. ■ By using hollow rods to inject grout from the reinforcement material, reliable grouting is possible. ■ Construction is feasible even in narrow working spaces. *For more details, please refer to the catalog or feel free to contact us.

  • Civil Engineering Method
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Construction method "Mini Anchor PI"

Construction method "Mini Anchor PI"

Through improvements, the conventional method, "Mini Anchor Method" "DO," has evolved to the new method "PI"!

The "Mini Anchor PI" is a construction method that can be implemented without the use of large machinery, making it possible to work in areas with limited space. Due to the bearing resistance effect of the enlarged tip, the length of the reinforcement material can be shortened, and the pitch can be widened, resulting in fewer installations and improved overall workability. Additionally, because the installation length is short, it is useful in cases where encroachment on adjacent boundaries is a concern. 【Features】 ■ Can be constructed with simple equipment ■ Improved workability ■ Avoids boundary encroachment ■ Pressurized grout injection ■ Prevention of grout leakage *For more details, please download the PDF or feel free to contact us.

  • Renovation and repair methods
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Reconstruction method (folded plate)

Reconstruction method (folded plate)

Using SK Roof 150 and SK Angle Haze V-III! Introducing our renovation method (folded plate).

We would like to introduce the renovation method (folded plate) of Meto Kakefu Co., Ltd. We use Haze 500 for the existing folded plates and SK square Haze V-II for the newly installed folded plates, along with various methods such as the Haze-type replacement fittings for compatible components (tight frames). The PDF document below provides a detailed introduction with illustrations. Please take a look. *For more details, please refer to the PDF document or feel free to contact us.

  • Renovation and repair methods
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hanging folding plate construction method

Hanging folding plate construction method

The main standard components are hanging brackets and sheet nuts! Let us introduce our hanging folding plate method.

We would like to introduce Metokakefu Co., Ltd.'s "Hanging Folded Plate Method." The main standard components include "Hanging Kichi H-type copper flange for thickness 6-11mm," as well as "H-type copper flange for thickness 12-16mm," "Sheet nut for H-type copper flange for thickness 5-10mm," and "Stud bolts with seats." The PDF document below provides a detailed introduction with photos and diagrams, so please take a look. 【Main Standard Components】 ■ Hanging Kichi (with 4-point set) for H-type copper flange thickness 6-11mm ■ Hanging Kichi (with 4-point set) for H-type copper flange thickness 12-16mm ■ Sheet nut for H-type copper flange thickness 5-10mm ■ Stud bolts with seats *For more details, please refer to the PDF document or feel free to contact us.

  • Roof and gutter construction
  • Special Construction Method
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wall Slide-in Method

Wall Slide-in Method

We offer two height options for wall tight lists! Introducing our special wall material construction method.

Introducing Meto Kakefu Co., Ltd.'s "Wall Slide-in Construction Method." We offer two types of the "Wall Tight List" repair fittings for small wave slate exterior walls, each with different heights. The main material is galvanized steel sheet. The PDF document below provides a detailed introduction with illustrations. Please take a look. 【Wall Tight List Specifications (Excerpt)】 ■ Main material: Galvanized steel sheet ■ Recommended drill screws ・ Type 1: Flex Reamer 5×35–45 ・ Type 2: Flex Reamer 5×32 *For more details, please refer to the PDF document or feel free to contact us.

  • Other wall materials
  • Special Construction Method
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Pipe Correction System "Thru-Ring Method"

Pipe Correction System "Thru-Ring Method"

We will revive all pipelines in everyday life without excavation.

The "Through Ring Method" is a technology for rehabilitating aging pipelines without excavation. Since it is a technology developed domestically, we provide materials and construction with stable quality. We conduct structural design based on the purpose and conditions, allowing for rehabilitation of aging pipes according to specific needs. Additionally, we can accommodate special construction requests, so please feel free to consult with us. 【Features】 ■ Provides materials and construction with stable quality ■ Restores functionality of aging pipelines, improves service life, and reinforces them ■ Solves issues related to aging pipelines ■ Adapts to self-supporting pipes and dual-layer structure pipes by adjusting the thickness of the rehabilitated pipe ■ Enables integrated rehabilitation of sewer pipes *For more details, please download the catalog or contact us.

  • Renovation and repair methods
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Construction method "Kurinka Road Method Paving"

Construction method "Kurinka Road Method Paving"

A groundbreaking construction method that significantly contributes to the multifunctionalization of pavement and environmental measures.

The "Kurinka Road Construction Method Paving" is a two-layer structure pavement that uses coal ash to permeate rainwater and retain moisture. In addition to its permeability, it also has moisture retention capabilities, significantly contributing to the multifunctionality of pavements and environmental measures. It has already been widely implemented in parks, walkways, squares, central medians, mountainous slopes, and mobile base stations, and is highly anticipated as an environmentally friendly multifunctional pavement that effectively addresses issues such as weed control, rainwater runoff, topsoil erosion, and heat island effects. 【Features】 ■ Contributes to resource recycling by utilizing coal ash ■ Double-layer pavement that permeates and retains moisture ■ Safe environmental pavement that has no impact on surrounding flora and fauna ■ Contributes to cost reduction in management expenses ■ Effective utilization of coal ash *For more details, please refer to the catalog or feel free to contact us.

  • Pavement construction
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Repro Panel Method

Repro Panel Method

In data centers and server rooms! Achieve cost reduction and environmental contribution with the Repro Panel method.

The "Repro Panel Method" is a revolutionary reuse system for aluminum OA floor panels used in data centers and server rooms. Until now, it was common practice to replace the entire aluminum panel when the surface material became old and damaged, as replacing the surface material was too labor-intensive and costly. With this method, the deteriorated anti-static tiles of existing raised floor panels can be replaced with new anti-static tiles. The repro panels, beautifully restored to like-new condition, are being well-received by major data centers. 【Features】 ■ Only the damaged surface material is replaced ■ Like new ■ Reduced maintenance and management costs ■ CO2 reduction ■ Resource conservation For more details, please refer to the catalog or feel free to contact us.

  • Other flooring materials
  • Special flooring/indoor
  • others
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Noise from repair work! Are you turning a blind eye? Silent flooring removal method.

Noise from repair work! Are you turning a blind eye? Silent flooring removal method.

Noise during floor material removal reduced from 100dB to 60dB! Significantly reduces stress for workers, residents, and nearby neighbors caused by noise and vibrations during floor material removal!

"Don't you think noise complaints are unavoidable?" The "Silent Floor Material Removal Method" is a technique that significantly reduces stress on residents caused by the loud noise and vibrations during floor material removal. In traditional large-scale renovation work for apartments, known as "construction while living," a vibration-type floor material stripping machine was used, which resulted in significant noise and vibrations. With the new method, the "Silent Floor Material Removal Method," a non-vibrating floor material stripping machine is used, which reduces noise to a level comparable to normal conversation, thereby alleviating stress on residents caused by noise and vibrations. **Features** - Quiet renovation work - Noise level comparable to conversation - Reduces stress on residents from noise and vibrations - Achieves smart construction that considers people and the environment - Outstanding quietness and safety For more details, please refer to the catalog or feel free to contact us.

  • Interior construction
  • Renovation and repair methods
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Data] Light Drain Columbus Method

[Data] Light Drain Columbus Method

We introduce the differences from conventional methods and construction reports regarding the Light Drain Columbus method.

This document introduces the ground replacement method "Light Drain Columbus Method." It includes differences from conventional methods, performance design goals based on the design technology of Light Drain Columbus, and construction reports. Additionally, actual measurement reference materials such as ground temperature are presented with photographs. We encourage you to read it. 【Contents】 ■ To the client (public works contractor) ■ Proposed technology with expected effects ■ Differences from conventional methods ■ Performance design goals based on the design technology of Light Drain Columbus ■ Construction report for ground improvement "Light Drain Columbus Method" *For more details, please refer to the PDF document or feel free to contact us.

  • Ground foundation construction method
  • Heat insulation and heat shielding methods
  • Earthquake-resistant construction method
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Kurin-ka Road Construction Method Paving

Kurin-ka Road Construction Method Paving

Suppressing the heat island phenomenon! A method for environmentally friendly pavement that effectively utilizes coal ash and combines permeability and water retention.

The "Klinka Road Construction Method" effectively utilizes coal ash (klinka ash) and is an environmentally friendly paving method that combines permeability and water retention. By storing rainwater in reservoirs, it is effective in preventing urban sewage and river flooding that occurs during heavy rainfall, and it absorbs and retains water, which is then vaporized, helping to mitigate the heat island phenomenon. It meets the environmental standards set by the government and does not affect the surrounding ecosystem or groundwater. 【Features】 ■ Effective use of coal ash (klinka ash) ■ Prevents the growth of most weeds ■ Reduces construction costs as ditches may not be necessary in some locations ■ Allows for colored paving that matches the surrounding environment ■ Good workability and can be opened relatively quickly (passable in about 4 hours at 20°C) *For more details, please download the PDF or feel free to contact us.

  • Civil Engineering Method
  • Pavement construction
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Construction method "Heat Dressing Method"

Construction method "Heat Dressing Method"

Refresh the damaged road surface! Heated surface treatment method.

The "Heat Dressing Method" is a surface treatment aimed at damaged asphalt pavement caused by cracks and ruts, primarily intended for the repair of asphalt pavement to improve drivability. Additionally, by implementing this method preventively before the extent of pavement damage worsens, it is expected to extend the lifespan of the pavement. Since existing pavement is recycled on-site without alteration, there is almost no generation of pavement waste, making it an economical and environmentally friendly method. 【Features】 ■ The driving surface becomes a smooth, seamless area, improving drivability. ■ The treatment thickness is thin, allowing for cost-effective construction. ■ The existing surface layer is reused as is after being loosened. ■ No pavement waste is generated. ■ Compared to methods like milling and overlay, it is expected to reduce CO2 emissions. *For more details, please refer to the catalog or feel free to contact us.

  • Renovation and repair methods
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Road Surface Maintenance Method "Heat Dressing Method"

Road Surface Maintenance Method "Heat Dressing Method"

Economical and environmentally friendly! Introduction to maintenance methods for asphalt pavement using surface recycling techniques.

The "Heat Dressing Method" is an economical and environmentally friendly pavement maintenance technique aimed at asphalt pavements that have developed cracks or ruts. By applying this method preventively while the pavement damage is still minor, an extension of the pavement's lifespan can be expected. This method is also applicable to municipal roads, parking lots, and farm roads. 【Features】 ■ Flat and easy-to-drive surface ■ Low CO2 emissions ■ Preventive repair method ■ No waste generated ■ Low construction costs *For more details, please refer to the PDF materials or feel free to contact us.

  • Renovation and repair methods
  • Pavement construction
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
TechnoNet Corporation Business Introduction

TechnoNet Corporation Business Introduction

Comprehensive Maintenance of Underground Tanks Listening to the Voice of the Earth

TechnoNet Co., Ltd. is a company primarily engaged in leak inspection services for underground tank hazardous material facilities. Our company aims to be a comprehensive maintenance manufacturer for underground tank facilities, achieving high precision and low prices, mainly in the Tokai region. Moving forward, we will continue to contribute to the preservation of the global environment by providing as much satisfaction as possible through our genuine service focused on our customers' future, via inspection, certification, investigation, and improvement projects. 【Business Activities】 ■ Leak inspection services for underground tank hazardous material facilities ■ Tank truck airtight pressure testing ■ Underground tank circulation cleaning/intrusive cleaning ■ Measuring instrument flow calibration/measuring instrument repair and maintenance ■ FRP lining construction, etc. *For more details, please refer to our catalog or feel free to contact us.

  • Geological Survey
  • Environmental Survey
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FRP lining method "SST3-Dual Wall"

FRP lining method "SST3-Dual Wall"

A structure that realizes a future-oriented tank lining. It can eliminate concerns about leakage accidents in one go.

The "SST3 Double Wall" is a future-oriented tank lining that utilizes existing single-shell tanks by converting the interior into a double shell and incorporating a leakage detection system into a newly established detection layer. With the realization of a constant monitoring system through the leakage detection system, it has become possible to operate facilities with higher safety. Additionally, by adopting the tank lining system with an integrated leakage detection layer, it will be possible to detect minor leaks before they lead to soil contamination incidents. [Features] ■ Constant monitoring of leaks is possible ■ The double wall lining structure eliminates concerns about leakage accidents ■ High cost-effectiveness and durability ■ Installation by WALFTANK Corporation *For more details, please refer to the PDF materials or feel free to contact us.

  • Special Construction Method
  • Renovation and repair methods
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tough Mesh Method (R)

Tough Mesh Method (R)

Improvements to the sheet have achieved cost reduction and weight reduction. It is possible to reduce the work processes and shorten the construction period.

This technology is a one-step concrete spalling prevention method. It is an extremely simple method that involves simply applying a "Tough Mesh Sheet" with an adhesive to the repair areas of the concrete structure. As a result, it can shorten the duration of road restrictions and railway closures, thereby reducing the impact on traffic. Additionally, it is partially transparent, allowing for monitoring of the concrete surface over time. 【Features】 ■ Good workability ■ After surface preparation, only adhesive application and fiber sheet attachment/deairing are required ■ Possible to shorten construction time ■ Can stabilize construction quality ■ Partially transparent, allowing for monitoring of the concrete surface over time *For more details, please refer to the PDF materials or feel free to contact us.

  • Concrete construction
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
SC plate method (Type F)

SC plate method (Type F)

A tunnel collapse prevention method that simply fixes a resin board with anchors.

The "SC Plate Method (Type F)" is a construction method primarily used for preventing spalling at the joints of tunnel linings where there is water leakage. By simply attaching a resin board, which is similar to insulation material, with anchors, it is possible to implement measures against spalling and prevent icicles in cold regions. 【Features】 - The board is lightweight, making installation easy. - It has moderate flexibility, allowing good conformity to the tunnel lining surface. - It can be easily cut, allowing for notching on-site. - The board is alkali-resistant (pH 14, 30-day immersion), eliminating concerns about deterioration due to efflorescence. - The addition of non-combustible paper improves flame resistance and self-extinguishing properties. *For more details, please refer to the PDF document or feel free to contact us.*

  • Concrete construction
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
STU Clear Sheet - S Method

STU Clear Sheet - S Method

A simplified process for preventing peeling by simply adhering a transparent sheet with adhesive material [NETIS registration number: KT-230146-A].

The STU clear sheet - S method is a simplified process for preventing peeling by simply adhering a transparent sheet with an adhesive. The adhesive used is classified as a designated combustible material rather than a hazardous substance under fire safety laws, enhancing safety against fires. 【Features】 ■ Uniform quality ■ Transparent, allowing visibility of the structure ■ Quick installation ■ Non-hazardous materials *For more details, please refer to the PDF document or feel free to contact us.

  • Concrete construction
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tough Sheet Method (R)

Tough Sheet Method (R)

Tunnel lining repair method using ultraviolet-curing FRP sheets.

The Tough Sheet Method involves attaching a tough sheet to the existing lining surface of a tunnel to prevent the detachment of concrete fragments and other materials. The tough sheet is soft and easy to handle before curing, and it cures after being exposed to ultraviolet light for about 20 minutes once applied to the construction area. Therefore, compared to conventional repair methods, it allows for extensive work to be completed in a short time, making it an ideal method for construction in locations with time constraints, such as railway and road tunnels. 【Features】 ■ Excellent detachment prevention effect ■ Fewer construction steps ■ Quick sheet curing ■ Transparent material ■ Flexibly conforms to the substrate *For more details, please refer to the PDF document or feel free to contact us.

  • Concrete construction
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-intensity thin-skin reinforcement method

High-intensity thin-skin reinforcement method

Thin-walled tunnel lining inward reinforcement method

The high-strength thin-shell reinforcement method uses a composite material that combines short-fiber reinforced mortar, which excels in compressive strength and compressive ductility, with continuous fiber mesh as tensile reinforcement, allowing for a thin reinforcement layer that can accommodate areas with limited internal cross-section. *This method was developed in collaboration with the Public Works Research Institute and Kuraray Co., Ltd.* 【Features】 ■ Cost reduction ■ Reduced load on general traffic ■ Easy construction method ■ High design flexibility *For more details, please refer to the PDF document or feel free to contact us.*

  • Concrete construction
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Introduction to the "Discharge Fragmentation Method" Technology

Introduction to the "Discharge Fragmentation Method" Technology

A new rock and concrete crushing technology using electricity and self-reactive liquids!

The "Electric Discharge Fragmentation Method" is a technology that generates shock waves similar to explosives using electrical power, allowing for efficient fragmentation of rock formations and concrete. It can achieve safe and rapid fragmentation with minimal power consumption. Additionally, it produces low noise, making it suitable for construction in urban areas and indoors. The "Electric Discharge Shock Generation Device" can be mounted on a van, offering excellent portability and transportability. 【Features】 - No use of explosives - Control over destructive power, noise, and vibration - Usable in narrow sites and indoors - Safe and rapid - Capable of fragmentation with minimal power consumption *For more details, please refer to the catalog or feel free to contact us.

  • Special Construction Method
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Construction method "KK Sheet Method"

Construction method "KK Sheet Method"

A concrete vertical joint construction method that improves workability and quality!

The "KK Sheet Method" is a construction method that uses an embossed resin sheet with rigid irregularities. It allows for uniform joint treatment, achieving strength equal to or greater than that of traditional methods. Additionally, it does not generate noise, dust, or contaminated water, contributing to the preservation of work and surrounding environments. Furthermore, one of its features is the ability to ensure more stable quality compared to conventional methods. 【Features】 ■ Obtained construction technology examination certification ■ NETIS semi-recommended technology ■ Ensures joint strength and improves durability *For more details, please refer to the catalog or feel free to contact us.

  • Wood panel and frame wall construction
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Metalworking method "Presetter SU"

Metalworking method "Presetter SU"

Double the ease of use with the <Single Unit> hardware construction method!

The "Presetter SU" is a one-piece hardware method that attaches only to the receiving side's columns (beams). It accommodates climbing beams up to 10 inches and hybrid beams made from Chinese timber. Additionally, by being a one-piece design and reducing size and weight, it achieves a lower price compared to the Presetter. The reduced number of drift pins also helps to keep the overall hardware costs down. 【Features】 ■ 35% reduction in hardware installation time for precut companies ■ Low cost ■ Compact and lightweight ■ Minimal cross-section loss of beams ■ Reduction of waste, etc. *For more details, please download the PDF or feel free to contact us.

  • Support hardware/opening hardware
  • Special Construction Method
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wood fiber insulation material "Steico Flex 038"

Wood fiber insulation material "Steico Flex 038"

It's like the comfort of living in a forest. It protects your life from the discomfort of summer.

"Stykoflex 038" is an interior filling insulation material that is strong in summer insulation. The notable feature is its high thermal capacity among various insulation materials. It boasts a high density and heat storage capacity of approximately 50 kg/m³. Additionally, this product excels in soundproofing and noise reduction. It strongly adheres to various surfaces and eliminates gaps, effectively blocking external sounds. [Features] - Thermal capacity that shuts out the summer heat - Very slow thermal diffusion - Prevents summer humidity and winter condensation - Made from wood, free of harmful chemicals - EPD certified *For more details, please refer to the PDF document or feel free to contact us.*

  • Insulation work
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
The dwelling of the healer.

The dwelling of the healer.

Unique technology that suppresses oxidation! Please achieve a healthy and comfortable life in a living environment that is less prone to "rust."

The "Iyashiro no Sumai" improves residential environments with excessive active oxygen through a unique combination of technologies that suppress oxidation. Just as iron rusts, the human body also "rusts," leading to the promotion of disease and aging. One of the "Four Principles of Healthy Housing," the "Antioxidant Measures," mitigates the effects of active oxygen, creating an environment that is less prone to "rusting." 【Four Principles of Healthy Housing】 ■ Enhance thermal properties ■ Focus on natural materials ■ Implement antioxidant measures ■ Design for health and comfort *For more details, please refer to the PDF document or feel free to contact us.

  • Residential interior systems
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tn-p method (Tunnel backfill repair polyurethane injection method)

Tn-p method (Tunnel backfill repair polyurethane injection method)

A tunnel repair method that does not use any fluorocarbons! All materials and equipment can be loaded onto a 4-ton truck.

This technology is a polyurethane injection method for tunnel backfill repair that takes the environment into consideration and excels in workability. The injection equipment is very compact, and the filling material is transported in a liquid state, occupying about 1/40 to 1/12 of its volume after foaming, allowing all necessary materials to be loaded onto a single 4-ton truck. It can foam and cure even in areas where water has accumulated, making it effective for groundwater stoppage. Additionally, no chlorofluorocarbons, which contribute to ozone layer depletion and global warming, are used in the foaming agent. 【Features】 ■ Excellent workability ■ Lightweight ■ Cost-effective ■ Environmentally friendly ■ Can foam and cure even in areas where water has accumulated, effective for groundwater stoppage *For more details, please refer to the PDF document or feel free to contact us.

  • Tunnel construction
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cosmetic Exposed Aggregate Concrete Ultra-Durable Protection System 'RC-PN System'

Cosmetic Exposed Aggregate Concrete Ultra-Durable Protection System 'RC-PN System'

A system developed solely for exposed concrete finishes.

The "RC-PN System" encompasses the essential know-how for achieving exposed concrete finishes, specializing in exposed concrete finishes backed by experience and proven results. You can choose from three types: a fluororesin finish that boasts extremely high durability, an acrylic silicone resin finish that offers durability while excelling in cost performance, and an acrylic resin finish that is ideal for areas where light resistance is less critical, such as interiors. Our experienced technical staff guarantees a natural finish. Please feel free to consult us. 【Features】 ■ Excellent protective performance ■ Natural finish ■ Proposals for the best construction methods according to the situation *For more details, please refer to the catalog or feel free to contact us.

  • Concrete construction
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Construction method

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.