List of Common materials products
- classification：Common materials
496～540 item / All 36721 items
Introducing examples of handrail production that ensures safety with appropriate costs and short delivery times!
- handrail
Clear visibility with transparent glass! Recommended for store and building entrances.
- Disaster prevention fittings
- Entrance/Exterior Doors
Traffic can be opened within a day! The curing time until traffic opening is approximately 24 hours.
- Paving Materials
- cement
CO2 emissions during manufacturing have been reduced by approximately 40% compared to conventional methods! This is a low-carbon type of injection material.
- Paving Materials
- cement
Exhibiting a high water absorption rate of about 80%! This product has a significant effect on suppressing surface temperature and is also excellent in durability.
- Paving Materials
- cement
Ideal as a 100% permeable water-retaining pavement injection material! It is expected to have lasting effects in suppressing road surface temperature rise.
- Paving Materials
- cement
In addition to strength, a maximum water absorption rate of about 40%! A compressive strength of approximately 4 N/mm² can be achieved with a curing time of 3 hours.
- Paving Materials
- cement
It has excellent slip resistance due to its hardness and strength! There is no discoloration or fading permanently.
- Aggregates and crushed stone
Achieve high strength! A bending strength of over 2.0 MPa can be obtained in 3 hours of curing time, and over 4.0 MPa in 3 days.
- Paving Materials
- cement
Early traffic opening is possible! A compressive strength of over 5 MPa can be achieved with a curing time of 3 hours.
- Paving Materials
- cement
You can choose the type according to the transportation opening! We introduce the quick-strength type that allows for transportation opening in just one day.
- Paving Materials
- cement
Seven types with chain call diameters of 6 to 22 mm and basic working loads of 1.2 to 16.0 tons.
- Work tools
Carefully selected raw materials are pre-mixed! On-site, you can obtain a uniform cement milk simply by mixing it with water.
- Paving Materials
- cement
Used for lifting tasks such as can manufacturing and casting molds! Large mouth hook with a wide opening.
- Work tools
- others
The design features a large mouth opening and is engineered to maintain strength even with a lifted tip.
- Work tools
Automatically locks the opening during lifting! The chain connection and latch are integrally molded.
- Work tools
- others
Support for sizes from 4mm to 16mm! Introduction of the Cobra hook eye type.
- Work tools
- others
This is a hook with a chain call diameter of 4 to 16 mm and a basic working load of 0.5 to 8.0 tons.
- Work tools
Eliminate the hook tip's snagging part to prevent accidental incidents before they happen!
- Work tools
- others
Strength of 10N/mm² or more is achieved 2 hours after injection! A grout material with rapid strength development.
- grout
- cement
Safety factor of 5 or more! Introduction of a special master link for three-point suspension.
- Work tools
- others
High-speed hard type allows for early release! Ideal backfill material for emergency construction and similar applications.
- grout
- Paving Materials
- cement
Prepared with 140 pieces, 190 pieces, and 250 pieces! Large special master link.
- Work tools
- others
We have 140 pieces, 190 pieces, and 250 pieces available! Large special master links exclusively for double suspension.
- Work tools
- others
140 pieces, 190 pieces, and 250 pieces available! Large special master link exclusively for single hook use.
- Work tools
- others
Compatible from 4mm to 22mm! Standard master link for 3 and 4 leg slings.
- Work tools
- others
There is almost no change in liquidity over time for up to 20 minutes after mixing! It is a product with minimal bleeding as well.
- grout
- Paving Materials
- cement
Compatible with 4mm to 22mm! Standard master link for double hook use.
- Work tools
- others
Compatible with 4mm to 22mm! Standard master link for single hook use.
- Work tools
- others
The pin rotates 360 degrees at all times! It is used to connect the chain and the fittings.
- Work tools
The pin rotates 360 degrees at all times to prevent uneven wear.
- Work tools
Ideal for emergency construction with high-speed rigidity! Usable time is approximately 10 to 15 minutes.
- grout
- Reinforcement and repair materials
- cement
Adoption of special pink coating.
- Work tools
- others
We will exhibit at MECT2011 (Mechatronics Technology Japan 2011).
We will be exhibiting at MECT2011 (Mechatronics Technology Japan 2011). 【Date】September 29 (Thursday) to October 2 (Sunday), 2011 【Location】Port Messe Nagoya (Nagoya International Exhibition Center) 【Booth Number】1B15 【Exhibited Products】Rotating eye bolts, omnidirectional eye bolts, eye bolts with ball bearings, sling chains, earthquake-resistant chain sets We look forward to your visit.
Ideal for pressure injection work with moderate viscosity! Grout material that can also be used for pump delivery and insertion.
- grout
- Reinforcement and repair materials
- cement
High intensity and high fluidity! Exhibits excellent fluidity and can sufficiently fill fine gaps.
- grout
- Reinforcement and repair materials
- cement
High strength yet possessing high toughness.
- Safety and consumables
Supports deburring of complex shapes! Achieves high-speed rotation with a unique air motor.
- Work tools
Deburring of 'Belton' with robots too! A 20mm wide belt is effective for deburring curved areas.
- Work tools
Covers everything from rough grinding to finishing polishing! The double action method leaves no polishing marks.
- Work tools
■ "Notice of Participation in the 30th Mechanical Elements Technology Exhibition [Tokyo] ■ [July 9, 2025 (Wednesday) - July 11, 2025 (Friday)]
Nitto Kohki will exhibit at the "30th Mechanical Components Technology Exhibition [Tokyo]" held at Makuhari Messe Hall 5 from July 9 (Wednesday) to July 11 (Friday). [Booth Number: Hall 5 31-32] At this exhibition, we will showcase a variety of products, including the electric suction hand "e-VEE" with a built-in pump that requires no compressed air, a cordless belt sander, the electric driver "Delvo" that can be mounted on robots, and the "Flow Monitor" that allows for easy visualization of coolant flow in molds and other applications.
Leave the adjustment of concrete and asphalt unevenness to us! Vehicle traffic is possible in 3 hours.
- Reinforcement and repair materials
Crack repair can be done easily and quickly! It is easy to handle and allows for fast and safe work.
- Reinforcement and repair materials
Various repairs can be done easily and quickly! It is possible to carry out construction more easily, quickly, and efficiently.
- Reinforcement and repair materials
The suspension ring is movable by 180°! The spacer of the welding block ensures the necessary distance for root welding.
- Safety and consumables
You can prevent initial frost damage using simple preservation methods such as using preservation sheets!
- Concrete admixture
It has a delayed curing property, which can suppress the occurrence of filling defects and cold joints!
- Concrete admixture