Utilization technology of the ultrasonic system 1MHz type (sound pressure measurement analysis, oscillation control)

Ultrasonic probe capable of controlling ultrasonic propagation conditions above 900 MHz.

The Ultrasonic System Research Institute offers custom-made ultrasonic probes capable of controlling ultrasonic propagation states above 900 MHz. We manufacture and develop original ultrasonic oscillation control probes tailored to your objectives. Ultrasonic Probe: General Specifications - Measurement Range: 0.01 Hz to 200 MHz - Oscillation Range: 0.5 kHz to 25 MHz - Propagation Range: 0.5 kHz to over 900 MHz (confirmed and evaluated through analysis) - Materials: Stainless steel, LCP resin, silicone, Teflon, glass, etc. - Oscillation Equipment: Example - Function Generator By understanding the acoustic properties of metals, resins, glass, etc., we achieve propagation states tailored to your needs regarding sound pressure level, frequency, and dynamic characteristics through oscillation control. This is a new foundational technology for precision cleaning, processing, stirring, inspection, etc., based on measurement, analysis, and evaluation techniques for ultrasonic propagation states. By utilizing the acoustic properties (surface elastic waves) of various materials (such as glass containers), ultrasonic stimulation to structures and machine tools weighing several tons can be controlled with ultrasonic output below 20 W, even in a 5000-liter water tank.

• Non-destructive testing
• Other analytical equipment
• others

Consulting services for processing technology utilizing megahertz ultrasonic oscillation control - Utilizing nonlinear phenomena of ultrasound.

The Ultrasonic System Research Institute provides consulting services for ultrasonic processing technology using its original product: ultrasonic systems (sound pressure measurement analysis, oscillation control). In response to the current state of ultrasonic processing, we propose and implement ultrasonic enhancement and improvement methods based on sound pressure measurement and analysis. Specifically, we will discuss ultrasonic enhancements through the measurement and confirmation of processing machines using our original product: Ultrasonic Tester NA (recommended type), which allows for easy measurement and analysis of ultrasonic waves. In line with the ultrasonic enhancements, we propose the use of our original product: Ultrasonic Oscillation System (1 MHz, 20 MHz), which enables easy oscillation control of ultrasonic waves.

• Non-destructive testing
• Other measuring instruments
• others

Ultrasonic system combining "Ultrasonic Tester NA (10 MHz)" and "Ultrasonic Oscillator (20 MHz)"

An ultrasonic system that allows for easy measurement analysis and oscillation control. The Ultrasonic System Research Institute is publicly conducting experiments using a system that combines the "Ultrasonic Tester NA (recommended type)," which allows for easy measurement analysis of ultrasonic waves, and the "Ultrasonic Oscillation System (20 MHz)," which enables easy oscillation control of ultrasonic waves. Ultrasonic Probe: Overview Specifications - Measurement Range: 0.01 Hz to 200 MHz - Oscillation Range: 0.5 kHz to 25 MHz - Propagation Range: 0.5 kHz to over 900 MHz (confirmed and evaluated through analysis) - Materials: Stainless steel, LCP resin, silicone, Teflon, glass, etc. - Oscillation Equipment Example: Function Generator Note: Ultrasonic Propagation Characteristics 1) Detection of Vibration Modes (Changes in Autocorrelation) 2) Detection of Nonlinear Phenomena (Changes in Bispectrum) 3) Detection of Response Characteristics (Analysis of Impulse Response Characteristics) 4) Detection of Interactions (Analysis of Power Contribution Rates) Note: "R" Free Statistical Processing Language and Environment - autocor: Autocorrelation Analysis Function - bispec: Bispectrum Analysis Function - mulmar: Impulse Response Analysis Function - mulnos: Power Contribution Rate Analysis Function

• Water Treatment
• Other analytical equipment
• others

A combination of "Ultrasonic Tester NA," which allows for easy measurement and analysis of ultrasound, and "Ultrasonic Oscillation System," which enables easy control of ultrasonic oscillation.

Ultrasonic "Sound Pressure Measurement Analysis Device (Ultrasonic Tester NA)" The Ultrasonic System Research Institute manufactures and sells the "Ultrasonic Tester NA (Standard Type)", which allows for easy measurement and analysis of ultrasonic waves. System Overview (Recommended System: Ultrasonic Tester NA) 1. Price 10 MHz Type: 198,000 yen (including tax: 10% consumption tax) 100 MHz Type: 264,000 yen (including tax: 10% consumption tax) 200 MHz Type: 297,000 yen (including tax: 10% consumption tax) 2. Contents One dedicated probe for measuring sound pressure of ultrasonic cleaners One general-purpose ultrasonic measurement probe One oscilloscope set One set of analysis software, instruction manual, and various installation sets (USB memory) 3. Features * Measurement (analysis) frequency range 10 MHz Type: from 0.1 Hz to 10 MHz 100 MHz Type: from 0.1 Hz to 100 MHz 200 MHz Type: from 0.1 Hz to 200 MHz * Capable of measuring surface vibrations * Continuous measurement for 24 hours * Simultaneous measurement of any two points * Measurement results displayed in graphs * Analysis software for time-series data included

• Non-destructive testing
• Other measuring instruments
• others

Ultrasonic probe-based sweep oscillation system - a technology for controlling low-frequency resonance phenomena and high-frequency nonlinear phenomena.

The Ultrasonic System Research Institute has developed a new control technology for ultrasonic probes using original technology. This is an application technology for measurement systems using the new ultrasonic probe. We provide consulting services for the development, manufacturing, and control methods of dedicated ultrasonic probes tailored to specific purposes. Regarding the characteristics of piezoelectric elements, we develop and manufacture original ultrasonic probes based on analyses that consider elastic wave propagation and various vibration states (modes). For measurements, the probes can be connected to an oscilloscope for use. For oscillation, they can be connected to a function generator. By performing feedback analysis of sound pressure measurement data, it becomes possible to quantify and evaluate nonlinear ultrasonic phenomena (acoustic streaming) and cavitation effects. The ultrasonic probes are "made-to-order" based on the confirmed intended use.

• Non-destructive testing
• Other analytical equipment
• others

Ultrasonic oscillation control system using a commercial function generator and ultrasonic oscillation probe.

The Ultrasonic System Research Institute has published a method for applying the "Ultrasonic Oscillation System (1 MHz)," which allows for easy control of ultrasonic oscillation, through timer control. Specific examples: 1) Preventing the deterioration of machining oil by irradiating it with ultrasound at night. 2) Improving quality through ultrasonic irradiation on NC machines. 3) Irradiating shelves that store metal and resin parts with ultrasound (surface modification). 4) Improving fluidity and uniformity of concentration by irradiating plating solutions, cleaning solutions, solvents, etc., with ultrasound. 5) Enhancing welding quality by irradiating welding machines with ultrasound. 6) Relieving surface residual stress by irradiating brazing devices and bending processing devices with ultrasound. 7) Improving cleaning levels by irradiating ultrasonic cleaning machines with ultrasound. ... ... 19) Others: 1: Combined use with various vibrations (e.g., motors, etc.). 2: Maintenance through ultrasonic irradiation during holidays (2-3 hours). 3: Aging treatment through ultrasonic irradiation. ... ... Combined use with fine bubbles. Combined oscillation control of multiple ultrasonic sources. Use of ultrasonic propagation tools.

• Non-destructive testing
• Other measuring instruments
• others

We manufacture and sell an "oscillation system at 20 MHz" that allows for easy control of megahertz ultrasonic oscillation.

The Ultrasonic System Research Institute has developed a megahertz ultrasonic oscillation control system that applies acoustic characteristic analysis and evaluation technology related to the manufacturing of original products: ultrasonic oscillation probes. This is a new application system for cleaning, modification, inspection, and more using ultrasonic waves. It is also possible to apply control through the combination of low-frequency vibrations and sounds. Developed from an engineering (experimental and technical) perspective on elastic waves and an abstract algebraic ultrasonic model, this application system technology has been created. The key point is the utilization of surface acoustic waves. By confirming the propagation characteristics of ultrasonic waves depending on the conditions of the target object (Note 1), it is important to address it as an original nonlinear resonance phenomenon (Notes 2, 3). Note 1: Propagation characteristics of ultrasonic waves - Nonlinear characteristics - Response characteristics - Fluctuation characteristics - Effects due to interactions Note 2: Original nonlinear resonance phenomenon The occurrence of harmonics generated by original oscillation control, realized at high amplitudes through resonance phenomena, leads to the resonance phenomenon of ultrasonic vibrations. Note 3: Transient ultrasonic stress wave

• Vibration and Sound Level Meter
• Scientific Calculation and Simulation Software
• others

Ultrasonic plating treatment technology using fine bubbles and megahertz ultrasonic waves.

The Ultrasonic System Research Institute has been developing ultrasonic plating treatment technology utilizing fine bubbles and megahertz ultrasound in collaboration with Japan Barrel Industry Co., Ltd. since 2015. Note: As of August 2024, it is continuously evolving based on good results into various application technologies. 1) Cleaning, processing, welding, plating... surface treatment... 2) Chemical reactions, liquid homogenization, stirring... 3) Inspection, evaluation... 4) Optimization control of ultrasound and fine bubbles tailored to specific purposes. Currently, in collaboration with Japan Barrel Industry Co., Ltd., we are developing application technologies utilizing ultrasound and fine bubbles for iron plating treatment (iron powder, amorphous, megahertz ultrasound...). If you are interested, please contact us via email. Ultrasonic propagation characteristics: 1) Detection of vibration modes (changes in autocorrelation) 2) Detection of nonlinear phenomena (changes in bispectrum) 3) Detection of response characteristics (analysis of impulse response characteristics) 4) Detection of interactions (analysis of power contribution rates)

• Non-destructive testing
• Other measuring instruments
• others

Application of feedback analysis using multivariate autoregressive models.

Features (in the case of standard specifications) * Measurement (analysis) frequency range Specification: 0.1 Hz to 100 MHz * Surface vibration measurement is possible * Continuous measurement for 24 hours is possible * Simultaneous measurement of any two points * Measurement results displayed in graphs * Utilization of original analysis software for time series data This is a measurement system using ultrasonic probes. Measurements are conducted by attaching the ultrasonic probe to the target object. For the measured data, considering position and state along with elastic waves, various acoustic performances are detected. Consulting services are available for sound pressure measurement analysis technology: 1) Operation of measurement equipment 2) Operation of analysis software 3) Evaluation methods for analysis results <Concept of Analysis: Statistical Thinking> Statistical mathematics has both abstract and concrete aspects, and through contact with concrete elements, abstract thoughts or methods are developed, which is the characteristic of statistical mathematics. Ultrasonic propagation characteristics: 1) Detection of vibration modes 2) Detection of nonlinear phenomena 3) Detection of response characteristics 4) Detection of interactions

• others

Dynamic control technology for ultrasonic cleaning machines.

The Ultrasonic System Research Institute has developed ultrasonic cleaning technology utilizing the "Constructal Law" related to flow and shape. <References> 1) On Vibration From the Royal Institution's 133rd lecture "Vibration" I intend to describe almost all of the important fields of mechanical engineering here. [Author] Richard B. Bishop [Translator] Hidetaro Nakayama, Kodansha (1981, B-471) 2) Flow and Shape The evolution of all shapes is governed by the "Constructal Law," which aims to improve flow! [Authors] Adrian Bejan, J. Peder Zane [Translator] Hiroyuki Shibata, [Commentator] Shigeo Kimura, Kinokuniya (2013) 3) How Cybernetics Was Born [Author] Norbert Wiener [Translator] Yasuo Shizume, Misuzu Shobo (1956) Using the above as references and hints, we have organized the technology for measuring and utilizing "nonlinear effects" in ultrasonic propagation phenomena according to the "Constructal Law," which aims to improve flow, culminating in ultrasonic cleaning technology.

• pump
• Drainage and ventilation equipment
• others

To stabilize the effects of cavitation, a statistical perspective is essential — a technology to optimize nonlinear ultrasonic phenomena according to specific purposes.

<Regarding the Creation of Logical Models> (Using Information Quantity Criteria) 1) Based on various fundamental technologies, clearly recognize the "information data group," DS = (D1, D2, D3), related to the subject, consisting of: D1 = Objective knowledge (theory supported by academic logic) D2 = Empirical knowledge (results obtained so far) D3 = Observational data (current state) and create multiple model proposals from its organizational use. 2) Understand statistical thinking as a method of realizing information acquisition through the composition of the information data group (DS) and the repeated proposal and verification of models based on it. 3) Determine the optimal model by comparing various models using evaluation methods such as AIC. 4) Construct ultrasonic devices and systems based on the created models. 5) Considering time and efficiency, the following responses are proposed: 5-1) Taking into account the "logical model creation matters," create "intuitive models" for multiple people to examine. 5-2) Modify and review the models based on actual data and new information. 5-3) Enter into specific discussions about devices and systems based on models that the review members can agree upon.

• Other analytical equipment
• Scientific Calculation and Simulation Software
• others

Ultrasound measurement and analysis can be easily performed with the ultrasound tester NA (10MHz oscilloscope type).

The Ultrasonic System Research Institute (located in Hachioji City, Tokyo) has developed the Ultrasonic Tester NA (100MHz oscilloscope type), which makes ultrasonic measurement and analysis easy. Features (Standard Specifications) - Measurement (Analysis) Frequency Range: 0.1Hz to 10MHz - Ultrasonic Oscillation: 1Hz to 1MHz - Capable of measuring surface vibrations - Continuous measurement for 24 hours - Simultaneous measurement of any two points - Display of measurement results in graph form - Attached software for time-series data analysis This is a measurement system using ultrasonic probes. The ultrasonic probe is attached to the target object for oscillation and measurement. The measured data is analyzed considering position, state, and elastic waves, detecting various acoustic performances.

• Other analytical equipment

Utilizing nonlinear phenomena related to megahertz ultrasonic propagation states.

The Ultrasonic System Research Institute has developed a new surface inspection technology using megahertz ultrasonic oscillation based on its track record of analyzing ultrasonic data propagating on the surface of target objects. This method applies measurement and analysis technology for "sound pressure and vibration" controlled by ultrasonic probe oscillation. We provide consulting and evaluation technology explanations tailored to the development of ultrasonic probes that match the target object's surface vibration modes. This is an application of new ultrasonic oscillation control technology. By utilizing nonlinear phenomena related to megahertz ultrasonic propagation states that correspond to the acoustic characteristics of the target object, it is possible to detect new features regarding the surface condition of the target object. In particular, it serves as a fundamental technology for surface inspection of substrate components and preliminary evaluation of precision cleaning parts, utilizing response characteristics derived from combinations of oscillation and reception, establishing new evaluation parameters for ultrasonic vibration. By constructing and modifying a logical model based on measurements, analyses, and evaluations of the dynamic characteristics of ultrasonic surface elastic wave propagation phenomena, we have enabled effective use tailored to the objectives (evaluation).

• Analysis and prediction system
• Other measuring instruments
• Scientific Calculation and Simulation Software

In facilities operating nurse call systems, we have made bed exit sensors wireless, allowing them to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. This helps prevent accidents caused by falls, slips, or wandering, contributing to the efficiency of medical operations. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ Bed exit sensors notify wirelessly in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, or management: Are you facing any challenges with current issues or selecting the right sensors for parking management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Vehicle Detection Sensor Basic Guide This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document presents the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

Thank you very much for visiting the website of MI Corporation. We have completely renewed our website. To make it easier and more comfortable for our customers to use, we have changed the structure and design and introduced features such as product search functionality. We will continue to enhance the content with the aim of creating an even more user-friendly site. We appreciate your continued support of MI Corporation.

The number of stores introducing Majesta Fragrance's commercial aroma diffusers is increasing. Salons, fitness gyms, restaurants, hotels, esthetics, chiropractic clinics, offices... Regardless of the type of business, there are many voices expressing the desire to enhance the "quality of the space," and "scent presentation" is gaining attention as a new branding strategy. From the stores that have implemented our products, we have received numerous positive feedbacks such as: "Our customers' stay time has increased." "The impression upon entering the store has improved." "I no longer notice the smell of tobacco or unpleasant odors." Majesta Fragrance can propose the optimal scent presentation tailored to the industry and space. Majesta Fragrance offers free trial installations limited to the Kanto area. If your store is interested in scent presentation or would like to try it out once, please feel free to contact us.

Spelldata Inc. (Headquarters: Chiyoda-ku, Tokyo, Representative Director: Yoichiro Takehira) has joined the "Yamaguchi Women Digital Talent Development Consortium," which promotes the development of female digital talent in collaboration with Yamaguchi Prefecture, universities, companies, and organizations, starting in October 2025. Spelldata plans to conclude a business expansion agreement with Iwakuni City and open an office in 2026, and will actively support the development and recruitment of female digital talent in Yamaguchi Prefecture.