Development of a "flow-type ultrasonic system" based on acoustic pressure measurement analysis of ultrasound.

We have developed a completely new "vibration measurement technology" using our original product (ultrasonic tester).

The Ultrasonic System Research Institute (located in Hachioji, Tokyo) has developed a completely new vibration measurement technology using its original product (ultrasonic tester). The ultrasonic sound pressure measurement analysis technology developed so far applies "measurement, analysis, and control" techniques related to the nonlinear phenomena of ultrasound. From the accumulation of data measuring, analyzing, and evaluating the dynamic characteristics of ultrasound propagating on surfaces, we have developed a technology that can measure, analyze, and evaluate vibration states from low frequencies (0.1 Hz) to high frequencies (200 MHz). This technology enables new countermeasures based on new vibration phenomena concerning vibrations and noise from buildings and roads, equipment, devices, walls, pipes, desks, handrails, and the moment of metal melting during welding, as well as instantaneous vibrations during machining. This is a new method and technology, and various application cases have developed from the analysis results obtained so far. In particular, continuous data collection for a standard measurement time of 72 hours is possible, allowing measurement of very low-frequency vibrations and irregularly fluctuating vibrations.

• Other measuring instruments
• others

Proposal for a cleaning method optimized with fine bubbles and megahertz ultrasonic waves.

The Ultrasonic System Research Institute conducts improvements to ultrasonic cleaning machines (consulting available) using original products: ultrasonic systems (sound pressure measurement analysis, oscillation control). For the current ultrasonic cleaning machines, we propose and implement improvement methods based on sound pressure measurement and analysis. Specifically, we will discuss the level of improvement through measurement and verification of ultrasonic cleaning machines using our original product: Ultrasonic Tester NA (recommended type), which allows for easy measurement and analysis of ultrasonic waves. Depending on the level of improvement, we will suggest the use of our original product: Ultrasonic Oscillation System (1 MHz, 20 MHz), which allows for easy control of ultrasonic oscillation. Based on the conditions of the water tank, cleaning solution, items to be cleaned, and cleaning level, we will propose a degassing fine bubble generation liquid circulation device. Ultrasonic propagation characteristics: 1) Detection of vibration modes (changes in self-correlation) 2) Detection of nonlinear phenomena (changes in bispectrum) 3) Detection of response characteristics (analysis of impulse response) 4) Detection of interactions (analysis of power contribution rates)

• Non-destructive testing
• Scientific Calculation and Simulation Software
• others

Development of "Control Technology for Nonlinear Phenomena" Using a Small Pump

The Ultrasonic System Research Institute has developed "ultrasonic control technology" that dynamically controls nonlinear phenomena related to ultrasonic propagation by utilizing a small pump for liquid circulation. Nonlinear phenomena are evaluated through analysis using an ultrasonic tester. The complex changes in ultrasound (such as ultrasonic cleaners, ultrasonic probes, etc.) are confirmed through time-series data analysis of sound pressure from ultrasonic oscillation and reception, identifying various interactions. Based on the confirmation of these interactions, the oscillation control conditions using ultrasonic probes are optimized, achieving a dynamic ultrasonic control system tailored to specific objectives. In practical applications, such as ultrasonic cleaning, the ON/OFF control (or control of flow rate and velocity, etc.) of the current liquid circulation device is optimized by considering the ultrasonic propagation characteristics related to the installation state of the device and the surface elastic waves of the target object, including the output, oscillation frequency, and control conditions of the ultrasound. In particular, by utilizing the vibration characteristics of the pump to alternately circulate liquid and gas, new nonlinear effects of ultrasound and microbubbles are realized.

• Non-destructive testing
• Vibration and Sound Level Meter
• Scientific Calculation and Simulation Software

Acoustic flow control technology using ultra-fine bubbles and megahertz ultrasound.

<<Deaeration Fine Bubble Generation Liquid Circulation Device>> 1) By narrowing the suction side of the pump, cavitation is generated. 2) Cavitation causes bubbles of dissolved gas to form. The above describes the state of the deaeration liquid circulation device. 3) When the concentration of dissolved gas decreases, the bubble size of the dissolved gas due to cavitation becomes smaller. 4) Through appropriate liquid circulation, fine bubbles of less than 20μ are generated. The above describes the state of the deaeration microbubble generation liquid circulation device. 5) When ultrasonic waves are applied to the above-mentioned deaeration fine bubble generation liquid circulation device, the ultrasonic waves disperse and crush the fine bubbles, and when measuring the fine bubbles, the distribution of ultrafine bubbles becomes greater than that of fine bubbles. The above state indicates that ultrasonic waves can be stably controlled. 6) In the state where ultrasonic waves can be stably controlled, the original product: a megahertz ultrasonic oscillation control probe is used to control the oscillation of megahertz (1-20 MHz) ultrasonic waves. The method of controlling the sound pressure level is achieved by controlling the original nonlinear resonance phenomenon of liquid circulation and megahertz ultrasonic waves, setting and controlling it to an effective dynamic state.

• Water Treatment
• Other measuring instruments
• others

Ultrasonic control technology based on the classification of nonlinear phenomena in which ultrasonic vibrations propagate.

The Ultrasonic System Research Institute has developed a classification method for the phenomenon of ultrasonic vibration propagation by analyzing measurement data of ultrasonic propagation states using bispectral analysis. The method developed in this instance estimates the linear and nonlinear resonance effects based on the dynamic characteristics (changes in nonlinear phenomena) of the main frequencies (power spectrum) related to the ultrasonic propagation state. From previous data analysis, we have been able to classify effective utilization methods into the following four types: 1: Linear type 2: Nonlinear type 3: Mixed type 4: Variable type There are numerous successful cases of device development and control settings based on each of the above types. This technology will be offered as a consulting service. Ultrasonic propagation characteristics: 1) Detection of vibration modes (changes in autocorrelation) 2) Detection of nonlinear phenomena (changes in bispectrum) 3) Detection of response characteristics (analysis of impulse response) 4) Detection of interactions (analysis of power contribution rates) Note: The following tools will be used for analysis. Note: "R" is a free statistical processing language and environment.

• Other Software

Control technology for acoustic flow (the main cause of ultrasonic effects: nonlinear phenomena) using ultrasound and fine bubbles.

The Ultrasonic System Research Institute has developed a method (system) for the <analysis and evaluation> of ultrasound, applying "measurement, analysis, and control" technology related to the nonlinearity of ultrasound. We provide consulting for a degassing microbubble generation liquid circulation system utilizing this technology. To utilize (control) the complex and changing conditions of ultrasound in a stable state, we conduct consulting to add the degassing microbubble generation liquid circulation system to specific tanks present on-site. 1: Explanation of principles 2: Specific proposals tailored to the cleaning machine (device) 3: Explanation of know-how 4: Explanation of verification methods, adjustment methods, and maintenance methods Development of nonlinear vibration control technology using fine bubbles and megahertz ultrasound Regarding this technology, we provide consulting as "vibration measurement technology utilizing ultrasound." Ultrasound propagation characteristics: 1) Detection of vibration modes (changes in self-correlation) 2) Detection of nonlinear phenomena (changes in bispectrum) 3) Detection of response characteristics (analysis of impulse response characteristics) 4) Detection of interactions (analysis of power contribution rates)

• pump
• Other analytical equipment
• others

Optimization of cavitation and acoustic flow using a degassed fine bubble generation liquid circulation device.

The Ultrasonic System Research Institute has developed an ultrasonic cleaning machine utilizing microbubbles, based on measurement, analysis, and evaluation techniques related to ultrasonic propagation phenomena, which can also be used for ultrasonic processing, stirring, and chemical reactions. Recommended System Overview 1: Two types of ultrasonic transducers (standard types 38 kHz, 72 kHz) that perform surface modification treatment using ultrasonic waves and microbubbles. 2: An ultrasonic dedicated tank (standard type, inner dimensions: 500*310*340mm) that performs surface modification treatment using ultrasonic waves and microbubbles. 3: A degassing and microbubble generation liquid circulation system. 4: An optimization control system for ultrasonic output and liquid circulation via a control device. 5: An acoustic pressure management system using an ultrasonic tester. *Features This is an effective device utilizing an ultrasonic dedicated tank. Due to the efficient use of ultrasonic waves, the strength and durability of a standard tank are insufficient. Depending on the target and purpose of cleaning, stirring, and surface modification, two types of ultrasonic transducers are combined and controlled. The recommended combination is in the state of 38 kHz and 72 kHz. Technology for stably utilizing fine bubbles of 20 μm or less.

• pump
• Scientific Calculation and Simulation Software
• others

Dynamic Control Method for Megahertz Ultrasound Based on Classification Techniques Related to Ultrasonic Propagation Phenomena

The Ultrasonic System Research Institute has developed a classification method for ultrasonic propagation phenomena based on the analysis results of ultrasonic sound pressure data and changes in the bispectrum. This classification has been applied to Shannon's juggling theorem to develop a "dynamic control method for megahertz ultrasound." This technology is being offered for consulting proposals and implementation support. To utilize ultrasonic propagation phenomena stably and efficiently, it is necessary to examine the response characteristics and interactions related to conditions other than oscillators and transducers, as well as to develop dedicated tools. By examining oscillation waveforms and control conditions, new ultrasonic effects (Note 1: Original nonlinear resonance phenomenon) can be discovered. Utilizing ultrasonic phenomena primarily driven by nonlinear effects according to specific purposes enables highly efficient use of ultrasound. In particular, there has been an increase in achievements in nanolevel ultrasonic technology. Note 1: Original nonlinear resonance phenomenon The generation of harmonics caused by original oscillation control, which is realized at high amplitudes due to resonance phenomena, results in the resonance phenomenon of ultrasonic vibrations.

• Non-destructive testing
• Scientific Calculation and Simulation Software
• IoT

Optimization technology based on measurement and analysis of ultrasonic propagation of the target.

<Dynamic Control System for Ultrasound> The propagation state of ultrasound is captured as a system, and analysis and control are performed. Many purposes for utilizing ultrasound involve predicting or controlling the nonlinear phenomena of ultrasound propagating through target objects or liquids. However, in many implementations, numerous issues have been pointed out due to the differences between the theory of cavitation and actual results. In response to such cases: 1) To eliminate obstacles, for ultrasound that changes over time, statistical data processing of sound pressure data is conducted, known as <Measurement and Analysis Technology for Ultrasound Propagation State>. 2) Based on the results of data analysis related to the target, the acoustic characteristics of the target are confirmed through <Technology for Detecting Acoustic Characteristics Related to Surface Elastic Waves of Target Objects and Acoustic Flow of Target Liquids>. 3) By confirming the characteristics, progress is made towards achieving dynamic control of ultrasound through <Technology for Controlling Nonlinear Phenomena with Sweep Oscillation Control for Multiple Ultrasounds>. Through these methods, the utilization state of ultrasound has been improved for efficient use, and there are numerous examples of original ultrasound control systems that achieve the intended use of ultrasound.

• pump
• Analysis and prediction system
• others

Dynamic control technology for ultrasonic cleaning machines.

The Ultrasonic System Research Institute has developed ultrasonic cleaning technology utilizing the "Constructal Law" related to flow and shape. <References> 1) On Vibration From the Royal Institution's 133rd lecture "Vibration" I intend to describe almost all of the important fields of mechanical engineering here. [Author] Richard B. Bishop [Translator] Hidetaro Nakayama, Kodansha (1981, B-471) 2) Flow and Shape The evolution of all shapes is governed by the "Constructal Law," which aims to improve flow! [Authors] Adrian Bejan, J. Peder Zane [Translator] Hiroyuki Shibata, [Commentator] Shigeo Kimura, Kinokuniya (2013) 3) How Cybernetics Was Born [Author] Norbert Wiener [Translator] Yasuo Shizume, Misuzu Shobo (1956) Using the above as references and hints, we have organized the technology for measuring and utilizing "nonlinear effects" in ultrasonic propagation phenomena according to the "Constructal Law," which aims to improve flow, culminating in ultrasonic cleaning technology.

• pump
• Drainage and ventilation equipment
• others

Control technology for acoustic flow (nonlinear phenomena) based on sound pressure measurement analysis.

The Ultrasonic System Research Institute has developed a system that applies technology to measure and analyze the state of ultrasonic waves propagating in the liquid within an ultrasonic tank, setting and controlling the propagation state of ultrasonic waves according to the effects of the tank's structure, strength, manufacturing conditions, and the state of liquid circulation. The liquid circulation within the ultrasonic tank is captured as a system, and the primary purpose of many ultrasonic (tank) applications is to predict or control the sound pressure changes of the liquid inside the tank. However, numerous issues have been pointed out in many implementations due to discrepancies between theory and practice. In response to such cases: 1) The removal of obstacles involves the use of statistical data analysis methods, which is the technology for measuring and analyzing ultrasonic propagation states. 2) Based on the results of data analysis related to the subject, the characteristics of the subject are confirmed, which is the technology for detecting the acoustic properties related to the surface elastic waves of the object. 3) Progressing to control realization through characteristic confirmation involves technology for controlling nonlinear phenomena. By employing the above methods, the utilization state of ultrasonic waves has been improved for efficient use, and there are numerous examples of original systems that have realized the intended use of ultrasonic waves.

• Vibration and Sound Level Meter
• Scientific Calculation and Simulation Software
• others

Are you making progress on measures for the "2024 Problem"? The management of drivers' working hours is becoming stricter, and in the logistics field, reducing "waiting time for loading" has become an urgent issue. To address this challenge, our company, Hotron, proposes the "Vehicle Detection Ultrasonic Sensor 'HM-UX2'," which instantly grasps the availability of loading bays. The 'HM-UX2' contributes to the resolution of waiting times by accurately understanding the availability status, reducing unnecessary waiting and queuing, and shortening waiting times, thereby alleviating the burden on drivers! By replacing the "eyes" of your loading bay management with this high-precision sensor, why not start taking measures against the "2024 Problem"? Take a look at the product features: "Can it accurately detect availability?" "Can we really use it in our company?" "I just want to know the cost, even if it's an estimate." If you have any questions or requests, please feel free to consult us first.

We sincerely apologize for the inconvenience, but we will be closed for summer vacation during the following period. Closure period: August 9 (Saturday) to August 17 (Sunday), 2025 Inquiries received during this period will be addressed sequentially starting from August 18 (Monday). We appreciate your understanding and cooperation.

Thank you very much for visiting our booth at the "High-Performance Materials Week [Osaka] 13th High-Performance Plastics Exhibition." Thanks to you, we had many visitors and were able to conclude the event successfully. In addition to the "PPLB-445" displayed on the day, we have a variety of products available. For those who were unable to measure samples at the venue, we offer a trial measurement service. Furthermore, for those who would like to know more about our products and services, we also accept online meetings. We welcome inquiries from those who attended as well as those who could not make it this time due to scheduling conflicts. Please feel free to contact us.

Aioi System is pleased to announce the release of the low-power wireless display "NW2991-JP," which achieves long battery life. This product supports 920MHz band wireless communication and can be operated in conjunction with wired displays. It can be easily integrated into existing systems by simply adding a master unit. With a high-speed response time of under one second and a variety of display functions for text and barcodes, it supports a wide range of applications. ▼ For more details, please see the press release linked below ▼ ■ Main Features - Maintenance-free design with a battery life of one year (low power consumption) - Compatible with mixed operation with wired displays - High-speed response (under one second) and diverse display formats - Stable communication in the 920MHz band ■ You can see the actual product at the exhibition This product will be displayed at the TOPPAN booth during the International Logistics Comprehensive Exhibition 2025, 4th INNOVATION EXPO. We invite you to visit the venue, see the actual product, and experience its performance. Dates: September 10 (Wed) - 12 (Fri), 2025 Venue: Tokyo Big Sight (Halls 4-8) Booth No: 5-907 (TOPPAN booth) Exhibition official website ▶ linked below We sincerely look forward to your visit.

Thank you very much for visiting our booth at the "Monozukuri World (Measurement, Inspection, and Sensor Exhibition) 2025." Thanks to you, we had many visitors, and the event concluded successfully. In addition to the "PPLB-445" showcased on the day, we have a variety of products available. For those who were unable to conduct sample measurements at the venue, we offer a trial measurement service. Furthermore, for those who would like to learn more about our products and services, we also accept online meetings. We welcome inquiries from those who attended, as well as those who were unable to come this time due to scheduling conflicts. Please feel free to reach out to us.