Release of ultrasonic 'sound pressure measurement analysis data'

Ultrasonic cleaning system that achieves ultrasonic control tailored to the purpose.

This is an effective device using a dedicated ultrasonic tank (original manufacturing method). Due to the high efficiency of ultrasonic utilization, standard tanks lack sufficient strength and durability. Depending on the target and purpose, multiple ultrasonic waves and a degassing fine bubble generation liquid circulation device are controlled based on sound pressure measurement analysis for cleaning, stirring, and surface modification. We propose various combinations and usage (control) methods. The key point is to achieve an ultrasonic propagation state tailored to the target, focusing on the "dissolved oxygen concentration distribution" and "liquid circulation" within the dedicated tank. << Degassing Fine Bubble (Microbubble) Generation Liquid Circulation Device >> 1) By narrowing the suction side of the pump, cavitation is generated. 2) Cavitation causes bubbles of dissolved gases to form. The above describes the state of the degassing liquid circulation device. 3) As the concentration of dissolved gases decreases, the bubble size of dissolved gases due to cavitation becomes smaller. 4) Through appropriate liquid circulation, fine bubbles (microbubbles) smaller than 20μ are generated. The above describes the state of the degassing microbubble generation liquid circulation device.

• Other measuring instruments
• Scientific Calculation and Simulation Software
• others

To stabilize the effects of cavitation, a statistical perspective is essential.

The Ultrasonic System Research Institute is developing technologies related to effective "measurement, analysis, and evaluation methods" utilizing a <statistical approach> in the field of ultrasonic applications. <About the statistical approach> Statistical mathematics has both abstract and concrete aspects, and through contact with concrete entities, abstract thoughts or methods are developed. This is the characteristic of statistical mathematics. Regarding ultrasonic research, "a statistical perspective is essential for stabilizing the effects of cavitation." <About models> Models are constructed with the aim of effectively advancing understanding, prediction, control, etc., regarding the subject. Constructing an accurate model is difficult, and discussions are always conducted using a suitably "rounded" representation of the complexity of the subject. In that sense, the process of constructing or building a model requires statistical thinking. Propagation characteristics of ultrasound: 1) Detection of vibration modes (changes in autocorrelation) 2) Detection of nonlinear phenomena (changes in bispectrum) 3) Detection of response characteristics (analysis of impulse response characteristics) 4) Detection of interactions (analysis of power contribution rates)

• Other measuring instruments
• Scientific Calculation and Simulation Software
• others

Leading to new applications of ultrasound from sound pressure and vibration data of ultrasound.

Application of ultrasonic sound pressure measurement, analysis, and evaluation technology The Ultrasonic System Research Institute has developed a method for the analysis and evaluation of ultrasound (system technology) that applies measurement, analysis, and control technology related to the nonlinearity of ultrasound. Using this technology, we will provide measurement, analysis, and evaluation support for ultrasonic devices. For specific support and costs, please contact us via email. *Comment* Currently, regarding the use of ultrasound, I believe it is very difficult to detect and confirm the optimal ultrasonic state for the intended purpose. Therefore, by incorporating "sound pressure data" into the daily management of ultrasound, we aim to resolve the relationship with the final evaluation state (defect rate, yield, etc.) through the accumulation and analysis of statistical data. By analyzing using time-series data analysis technology, effective improvements have been realized. As a result of continuing such improvements, the number of successful cases using low-output ultrasonic oscillation control has increased. We have been manufacturing and selling our original product: ultrasonic systems (sound pressure measurement analysis, oscillation control) since March 2021.

• Non-destructive testing
• Other measuring instruments
• others

- Application technology of the Ultrasonic System Research Institute based on ultrasonic measurement and analysis techniques -

The Ultrasonic System Research Institute has developed an ultrasonic oscillation control probe based on the acoustic properties of glass containers. By confirming the basic acoustic characteristics (response characteristics, propagation characteristics) depending on the shape and material of each container, it enables the desired ultrasonic propagation state through oscillation control (output, waveform, oscillation frequency, changes, etc.). The key point is to evaluate the dynamic vibration characteristics of the system based on the measurement and analysis of sound pressure data. We are setting and confirming new evaluation criteria (parameters) that indicate the state of ultrasonic waves suitable for the purpose. Note: - Nonlinear characteristics (dynamic characteristics of harmonics) - Response characteristics - Fluctuation characteristics - Effects due to interactions By developing original measurement and analysis methods that consider the acoustic properties and surface elastic waves of the target object, with reference to the concepts of statistical mathematics, we have developed a new technology regarding the relationships of various detailed effects related to vibration phenomena. The specific conditions for oscillation control are determined based on experimental confirmation, as they are also influenced by the characteristics of ultrasonic probes and oscillation equipment. As a result, there are increasing instances and achievements demonstrating that new nonlinear parameters are very effective.

• Non-destructive testing
• Vibration and Sound Level Meter
• Scientific Calculation and Simulation Software

We have developed a completely new "vibration measurement technology" using our original product (ultrasonic tester).

The Ultrasonic System Research Institute (located in Hachioji, Tokyo) has developed a completely new vibration measurement technology using its original product (ultrasonic tester). The ultrasonic sound pressure measurement analysis technology developed so far applies "measurement, analysis, and control" techniques related to the nonlinear phenomena of ultrasound. From the accumulation of data measuring, analyzing, and evaluating the dynamic characteristics of ultrasound propagating on surfaces, we have developed a technology that can measure, analyze, and evaluate vibration states from low frequencies (0.1 Hz) to high frequencies (200 MHz). This technology enables new countermeasures based on new vibration phenomena concerning vibrations and noise from buildings and roads, equipment, devices, walls, pipes, desks, handrails, and the moment of metal melting during welding, as well as instantaneous vibrations during machining. This is a new method and technology, and various application cases have developed from the analysis results obtained so far. In particular, continuous data collection for a standard measurement time of 72 hours is possible, allowing measurement of very low-frequency vibrations and irregularly fluctuating vibrations.

• Other measuring instruments
• others

Vibration measurement device using ultrasonic waves - Application of megahertz ultrasonic oscillation control technology -

The Ultrasonic System Research Institute has developed a completely new technology for controlling vibrations using original products (ultrasonic systems). Based on the analysis and evaluation of the nonlinear phenomena of ultrasound, we perform oscillation control of megahertz ultrasound, utilizing the sound pressure measurement analysis and oscillation control technology we have developed so far. From the accumulation of data measuring, analyzing, and evaluating the dynamic characteristics of ultrasound propagating on surfaces, we apply technology that can measure, analyze, and evaluate vibration states from low frequencies (0.1 Hz) to high frequencies (over 900 MHz). Measures based on new vibration measurement analysis have become possible regarding vibrations and noise from buildings and roads, equipment, devices, walls, piping, desks, handrails, the moment of vibration when metal melts during welding, instantaneous vibrations during machining, and the complex vibration states of entire manufacturing devices and systems. This is a new method and technology, and various application cases have developed from the results of previous implementations. In particular, it is possible to measure and respond to vibrations at very low frequencies and irregularly fluctuating vibrations.

• Vibration and Sound Level Meter
• Scientific Calculation and Simulation Software
• others

Plating method using ultrasound and fine bubbles

The Ultrasonic System Research Institute, in collaboration with Japan Barrel Industry Co., Ltd., is implementing a "plating method" utilizing ultrasound and fine bubbles for plating treatment. This is a new ultrasonic control technology based on the measurement, analysis, and evaluation of ultrasonic propagation conditions, aimed at precision cleaning, processing, stirring, and inspection. By utilizing the acoustic properties (surface elastic waves) of various materials, ultrasonic stimulation can be controlled for several tons of structures and machine tools in a 3000-liter tank with an ultrasonic output of less than 20W. It was developed as an application method for nonlinear phenomena through an engineering (experimental and technical) perspective on elastic wave phenomena and an abstract algebraic ultrasonic model. The key point is the technology for utilizing surface elastic waves on the surface of ultrasonic elements. By confirming the ultrasonic propagation characteristics depending on the conditions of the target object (Note 1), it is important to address it as an original nonlinear resonance phenomenon. Note 1: Ultrasonic propagation characteristics 1) Detection of vibration modes (changes in self-correlation) 2) Detection of nonlinear phenomena (changes in bispectrum) 3) Detection of response characteristics (analysis of impulse response) 4) Detection of interactions (analysis of power contribution rates)

• Non-destructive testing
• Scientific Calculation and Simulation Software
• others

Improvement process for ultrasonic propagation efficiency due to harmonics above 200 MHz.

The Ultrasonic System Research Institute has made it possible to control the nonlinear propagation state of ultrasound by measuring, analyzing, and controlling the propagation state of ultrasound and applying it as the acoustic characteristics of the target object. As a result, we have developed a technology that efficiently alleviates the residual stress on the surface of components and homogenizes the entire surface. With this technology to alleviate surface residual stress, we have improved fatigue strength against metal fatigue and achieved uniformity in various surface treatments. In particular, by considering the guided waves (surface elastic waves) of the target object in the setting and control of the ultrasonic propagation state, we have developed control methods, tools, and systems that realize effective dynamic changes in the target object as a certain range of stimuli that include nonlinear phenomena. We have confirmed a wide range of effects on various surfaces of metal parts, plastic parts, and powder materials. This technology is offered as a consulting service.

• Non-destructive testing
• Scientific Calculation and Simulation Software
• others

Ultrasonic control based on the classification of ultrasonic propagation conditions (measurement, analysis, and evaluation of sound pressure data) technology.

The Ultrasonic System Research Institute has developed manufacturing and utilization technologies for ultrasonic probes that control resonance phenomena and nonlinearity regarding surface elastic waves that propagate to objects above 100 MHz with oscillations below 20 MHz. We manufacture and develop original ultrasonic oscillation control probes tailored to specific purposes. The key point is the optimization of the propagation characteristics of surface elastic waves on the surface of ultrasonic elements according to the intended use. To achieve this, we adjust the surface of the ultrasonic probe based on the ultrasonic propagation characteristics through acoustic pressure measurement, analysis, and evaluation (acoustic pressure level, frequency range, nonlinearity, dynamic characteristics, etc.) to match the intended use. Ultrasonic Probe Measurement Range: 0.01 Hz to 100 MHz Oscillation Range: 1 kHz to 25 MHz Propagation Range: 1 kHz to over 900 MHz Materials: Stainless steel, LCP resin, silicon, Teflon, glass, etc. Oscillation Equipment Example: Function Generator By understanding the acoustic characteristics of the target object and installation conditions, we have achieved dynamic control of surface elastic waves (propagation state). We realize propagation states tailored to various purposes.

• Non-destructive testing
• Vibration and Sound Level Meter
• others

Optimization of Cleaning with Ultrasonic Waves and Fine Bubbles (Microbubbles) for Specific Purposes

Program 1) Basic knowledge and generation mechanisms of ultrasound and fine bubbles (microbubbles) 1. Basics of ultrasound 2. Propagation phenomena of ultrasonic vibrations 3. Fine bubbles (microbubbles) 2) Cleaning methods using ultrasound and fine bubbles (microbubbles) and their benefits 1. Basics of cleaning 2. Physical actions, chemical actions, interactions 3. Benefits of fine bubbles 3) Concepts of ultrasonic cleaning devices and know-how for introduction, development, and improvement 1. Installation methods for tanks and transducers 2. Microbubble generation liquid circulation systems 4) Specific application examples of cleaning and concrete examples of ultrasonic cleaning devices with proven cleaning effects

• Non-destructive testing
• Scientific Calculation and Simulation Software
• others

Optimization of Ultrasonic Propagation State Based on Acoustic Pressure Measurement Analysis - Optimal Control of Resonance Phenomena and Nonlinear Phenomena -

Methods to Improve the Current Ultrasonic Cleaning Machine (Development of Optimization Technology for Ultrasonic Tanks and Liquid Circulation) The Ultrasonic System Research Institute has developed technology to control the propagation state of ultrasonic waves by analyzing the effects of the structure, strength, and manufacturing conditions of the ultrasonic tank, as well as by setting the method of liquid circulation within the tank. This technology allows for the analysis and evaluation of the dynamic characteristics of complex ultrasonic vibrations in relation to various factors, enabling the setting of the circulation pump method to adjust the effects of cavitation and acceleration according to specific objectives. Note: The settings regarding the relationship between the tank, circulating liquid, and air are proprietary knowledge. This technology can also be applied to tanks that do not have an overflow structure. As a specific response, we can address the issues of ultrasonic attenuation caused by the current tank by adjusting the settings of the liquid circulation pump. In particular, for precise cleaning at the nano level, we propose additional measures for oscillation control using megahertz ultrasonic oscillation probes.

• pump
• Turbid water and muddy water treatment machines
• Water treatment technology and systems

To stabilize the effects of ultrasound, a statistical perspective is essential.

The Ultrasonic System Research Institute is developing technologies related to effective "measurement, analysis, and evaluation methods" using a <statistical approach> concerning the utilization of ultrasound. <About the Statistical Approach> Statistical mathematics has both abstract and concrete aspects, and through contact with concrete entities, abstract thoughts or methods are developed. This is the characteristic of statistical mathematics. - From "Statistics in Science" edited by Hirotsugu Akaike <About Models> Models are constructed with the aim of effectively advancing understanding, prediction, and control regarding the subject. Building an accurate model is difficult, and the examination is always conducted in a form that appropriately "rounds off" the complexity of the subject. In this sense, the process of constructing or building a model requires statistical thinking. <About the Relationship Between Models and Current Systems> (Points to Consider When Reflecting) 1) It is necessary to consider that preconceived notions and experiences may not be correct. 2) To think about the essence of a model, I believe it is effective to utilize category theory.

• Non-destructive testing
• Other analytical equipment
• Scientific Calculation and Simulation Software

Regarding sound pressure measurement data, a classification and evaluation technique for ultrasonic propagation states using feedback solutions of time-series data—self-correlation and bispectrum.

The Ultrasonic System Research Institute has been manufacturing and selling measurement and analysis systems for ultrasonic vibrations since April 2012. The system allows for visual confirmation of the nonlinear phenomena of ultrasound (acoustic streaming) and cavitation effects through graphs, considering elastic wave propagation in the analysis of the measured data. To account for the "nonlinear phenomena" in the complex variations of ultrasonic usage conditions, we analyze the autocorrelation and bispectrum using autoregressive models of time series data to evaluate and apply these changes. We have realized numerous new utilization methods according to various purposes. Ultrasonic propagation characteristics: 1) Detection of vibration modes (changes in autocorrelation) 2) Detection of nonlinear phenomena (changes in bispectrum) 3) Detection of response characteristics (analysis of impulse response characteristics) 4) Detection of interactions (analysis of power contribution rates) Note: "R" is a free statistical processing language and environment. - autcor: autocorrelation analysis function - bispec: bispectrum analysis function - mulmar: impulse response analysis function - mulnos: power contribution rate analysis function

• Non-destructive testing
• Vibration and Sound Level Meter
• Scientific Calculation and Simulation Software

Are you making progress on measures for the "2024 Problem"? The management of drivers' working hours is becoming stricter, and in the logistics field, reducing "waiting time for loading" has become an urgent issue. To address this challenge, our company, Hotron, proposes the "Vehicle Detection Ultrasonic Sensor 'HM-UX2'," which instantly grasps the availability of loading bays. The 'HM-UX2' contributes to the resolution of waiting times by accurately understanding the availability status, reducing unnecessary waiting and queuing, and shortening waiting times, thereby alleviating the burden on drivers! By replacing the "eyes" of your loading bay management with this high-precision sensor, why not start taking measures against the "2024 Problem"? Take a look at the product features: "Can it accurately detect availability?" "Can we really use it in our company?" "I just want to know the cost, even if it's an estimate." If you have any questions or requests, please feel free to consult us first.

We sincerely apologize for the inconvenience, but we will be closed for summer vacation during the following period. Closure period: August 9 (Saturday) to August 17 (Sunday), 2025 Inquiries received during this period will be addressed sequentially starting from August 18 (Monday). We appreciate your understanding and cooperation.

Thank you very much for visiting our booth at the "High-Performance Materials Week [Osaka] 13th High-Performance Plastics Exhibition." Thanks to you, we had many visitors and were able to conclude the event successfully. In addition to the "PPLB-445" displayed on the day, we have a variety of products available. For those who were unable to measure samples at the venue, we offer a trial measurement service. Furthermore, for those who would like to know more about our products and services, we also accept online meetings. We welcome inquiries from those who attended as well as those who could not make it this time due to scheduling conflicts. Please feel free to contact us.

Aioi System is pleased to announce the release of the low-power wireless display "NW2991-JP," which achieves long battery life. This product supports 920MHz band wireless communication and can be operated in conjunction with wired displays. It can be easily integrated into existing systems by simply adding a master unit. With a high-speed response time of under one second and a variety of display functions for text and barcodes, it supports a wide range of applications. ▼ For more details, please see the press release linked below ▼ ■ Main Features - Maintenance-free design with a battery life of one year (low power consumption) - Compatible with mixed operation with wired displays - High-speed response (under one second) and diverse display formats - Stable communication in the 920MHz band ■ You can see the actual product at the exhibition This product will be displayed at the TOPPAN booth during the International Logistics Comprehensive Exhibition 2025, 4th INNOVATION EXPO. We invite you to visit the venue, see the actual product, and experience its performance. Dates: September 10 (Wed) - 12 (Fri), 2025 Venue: Tokyo Big Sight (Halls 4-8) Booth No: 5-907 (TOPPAN booth) Exhibition official website ▶ linked below We sincerely look forward to your visit.

Thank you very much for visiting our booth at the "Monozukuri World (Measurement, Inspection, and Sensor Exhibition) 2025." Thanks to you, we had many visitors, and the event concluded successfully. In addition to the "PPLB-445" showcased on the day, we have a variety of products available. For those who were unable to conduct sample measurements at the venue, we offer a trial measurement service. Furthermore, for those who would like to learn more about our products and services, we also accept online meetings. We welcome inquiries from those who attended, as well as those who were unable to come this time due to scheduling conflicts. Please feel free to reach out to us.