Ultrasonic probe using a component with iron plating on polyimide film (technology utilizing ultrasonic propagation characteristics of iron plating)

Ultrasonic oscillation and control technology based on measurement and analysis using an ultrasonic tester.

The Ultrasonic System Research Institute has developed a technology to control nonlinear ultrasonic phenomena by utilizing the interactions generated from simultaneously oscillating two types of ultrasonic probes from one oscillation channel of a function generator. Note: Nonlinear (resonance) phenomena refer to the resonance phenomenon that occurs when the generation of harmonics produced by original oscillation control is realized at high amplitudes, resulting in ultrasonic vibration resonance. By optimizing the ultrasonic propagation characteristics of various materials according to their intended purpose, efficient ultrasonic oscillation control becomes possible. Through the measurement and analysis of sound pressure data from ultrasonic testers, this system technology allows for the dynamic changes of surface elastic waves to be controlled according to their intended use. In practical terms, multiple (two types of) ultrasonic probes generate multiple (two types of) oscillations (sweep oscillation, pulse oscillation), which create complex vibration phenomena (original nonlinear resonance phenomena), achieving high sound pressure at high frequency propagation states, or achieving low frequency propagation states with high sound pressure levels tailored to the desired natural frequency.

• Non-destructive testing
• Scientific Calculation and Simulation Software
• others

Dynamic control technology of ultrasound through sweeping oscillation of multiple ultrasonic probes.

The Ultrasonic System Research Institute has developed a classification method for the phenomenon of ultrasonic vibrations propagation through the measurement and analysis of ultrasonic propagation states. Based on this classification, we have developed a nonlinear sweep oscillation control technology for ultrasound using a nonlinear resonant ultrasonic oscillation probe. This ultrasonic sweep oscillation control technology dynamically controls the linear and nonlinear resonance effects according to the main frequency (power spectrum) related to the propagation state of the ultrasound, based on the dynamic characteristics (changes in nonlinear phenomena). From previous experiments and data measurement analyses, we have been able to classify effective utilization methods into the following four recommended controls: 1. Two types of sweep oscillation control (linear type) 2. Three types of sweep oscillation control (nonlinear type) 3. Four types of sweep oscillation control (mixed type) 4. Dynamic control (variable type) based on the combinations above. Furthermore, the variable type can be classified into the following three control types based on the sweep oscillation conditions: 1. Linear variable control type 2. Nonlinear variable control type 3. Mixed variable control type (dynamic variable type)

• Non-destructive testing
• Other measuring instruments
• others

A technology for alleviating and equalizing the surface residual stress of ultrasonic transducers using an ultrasonic and fine bubble generation liquid circulation system.

The Ultrasonic System Research Institute has published a technology that applies measurement, analysis, and control techniques related to the propagation state of ultrasound to relax the surface residual stress of ultrasonic transducers using an ultrasonic and fine bubble generation liquid circulation system. This technology for relaxing surface residual stress enables the improvement of fatigue strength against metal fatigue. In particular, by considering the guided waves (surface elastic waves) of the target object in the propagation state of ultrasound, we have developed a method to achieve effective ultrasonic irradiation conditions through the setting, tooling, and control. We have confirmed a wide range of effects on various types of metal parts, resin parts, and powder materials. This technology will be offered as a consulting service. This is a new surface treatment technology using ultrasound, which, including the general effects based on acoustic properties, can be utilized and developed as a distinctive operational technology for the development of new materials, stirring, dispersion, cleaning, and chemical reaction experiments.

• Special Construction Method
• Other measuring instruments
• others

Application of measurement, analysis, and evaluation techniques related to ultrasonic propagation conditions — Providing know-how for optimal control of ultrasound.

The Ultrasonic System Research Institute has developed design and manufacturing technology for ultrasonic dedicated tanks by applying measurement and analysis techniques related to ultrasonic propagation conditions. With the technology developed this time, we can achieve efficient utilization of ultrasound suitable for ultrasonic cleaning and surface modification, as well as dynamic control of cavitation and acoustic flow, and propagation conditions for target objects, for ultrasonic dedicated tanks ranging from a maximum length of 3 cm (liquid volume 5 cc) to 600 cm (liquid volume 8000 liters), tailored to specific purposes. In conventional tank (or transducer) design and manufacturing, insufficient consideration of acoustic characteristics often leads to uneven and unstable phenomena due to interference and attenuation of vibrations, making ultrasonic lifespan and tank troubles more likely to occur. This technology can detect issues (various distributions of cleaning solutions, installation methods of tanks and transducers) even in existing tanks and transducers, allowing for improvements and enhancements. --- Provided Know-How --- 0) Design and manufacturing methods for devices 1) ON/OFF control of ultrasound 2) ON/OFF control of liquid circulation 3) Provision of optimization know-how 4) Methods for utilizing megahertz ultrasound

• pump
• Water Treatment Plant
• others

Control technology for acoustic flow (the main cause of ultrasonic effects: nonlinear phenomena) using ultrasound and fine bubbles.

The Ultrasonic System Research Institute has developed a method (system) for the <analysis and evaluation> of ultrasound, applying "measurement, analysis, and control" technology related to the nonlinearity of ultrasound. We provide consulting for a degassing microbubble generation liquid circulation system utilizing this technology. To utilize (control) the complex and changing conditions of ultrasound in a stable state, we conduct consulting to add the degassing microbubble generation liquid circulation system to specific tanks present on-site. 1: Explanation of principles 2: Specific proposals tailored to the cleaning machine (device) 3: Explanation of know-how 4: Explanation of verification methods, adjustment methods, and maintenance methods Development of nonlinear vibration control technology using fine bubbles and megahertz ultrasound Regarding this technology, we provide consulting as "vibration measurement technology utilizing ultrasound." Ultrasound propagation characteristics: 1) Detection of vibration modes (changes in self-correlation) 2) Detection of nonlinear phenomena (changes in bispectrum) 3) Detection of response characteristics (analysis of impulse response characteristics) 4) Detection of interactions (analysis of power contribution rates)

• pump
• Other analytical equipment
• others

Control technology for acoustic flow (nonlinear phenomena) based on sound pressure measurement analysis.

The Ultrasonic System Research Institute has developed a system that applies technology to measure and analyze the state of ultrasonic waves propagating in the liquid within an ultrasonic tank, setting and controlling the propagation state of ultrasonic waves according to the effects of the tank's structure, strength, manufacturing conditions, and the state of liquid circulation. The liquid circulation within the ultrasonic tank is captured as a system, and the primary purpose of many ultrasonic (tank) applications is to predict or control the sound pressure changes of the liquid inside the tank. However, numerous issues have been pointed out in many implementations due to discrepancies between theory and practice. In response to such cases: 1) The removal of obstacles involves the use of statistical data analysis methods, which is the technology for measuring and analyzing ultrasonic propagation states. 2) Based on the results of data analysis related to the subject, the characteristics of the subject are confirmed, which is the technology for detecting the acoustic properties related to the surface elastic waves of the object. 3) Progressing to control realization through characteristic confirmation involves technology for controlling nonlinear phenomena. By employing the above methods, the utilization state of ultrasonic waves has been improved for efficient use, and there are numerous examples of original systems that have realized the intended use of ultrasonic waves.

• Vibration and Sound Level Meter
• Scientific Calculation and Simulation Software
• others

Ultrasound measurement and analysis can be easily performed with the ultrasound tester NA (10MHz oscilloscope type).

The Ultrasonic System Research Institute (located in Hachioji City, Tokyo) has developed the Ultrasonic Tester NA (100MHz oscilloscope type), which makes ultrasonic measurement and analysis easy. Features (Standard Specifications) - Measurement (Analysis) Frequency Range: 0.1Hz to 10MHz - Ultrasonic Oscillation: 1Hz to 1MHz - Capable of measuring surface vibrations - Continuous measurement for 24 hours - Simultaneous measurement of any two points - Display of measurement results in graph form - Attached software for time-series data analysis This is a measurement system using ultrasonic probes. The ultrasonic probe is attached to the target object for oscillation and measurement. The measured data is analyzed considering position, state, and elastic waves, detecting various acoustic performances.

• Other analytical equipment

Application technologies of <control, measurement, analysis, evaluation> using ultrasonic testers.

The Ultrasonic System Research Institute has developed a new ultrasonic characteristic evaluation technology using megahertz ultrasonic oscillation, based on the analysis results of ultrasonic data propagating on the surface of target objects. This method applies measurement and analysis technology for "sound pressure and vibration" controlled by ultrasonic probe oscillation. We provide consulting and evaluation technology explanations tailored to the development of ultrasonic probes suited to the target object's surface propagation vibration modes. This is an application of new ultrasonic oscillation control technology. By utilizing nonlinear phenomena related to megahertz ultrasonic propagation states that match the acoustic characteristics of the target object, it is possible to detect new features regarding the surface condition of the target object. In particular, it serves as a fundamental technology for surface inspection of substrate components and preliminary evaluation of precision cleaning parts, utilizing response characteristics derived from combinations of oscillation and reception, establishing new evaluation parameters for ultrasonic vibrations. By constructing and modifying a logical model based on the measurement, analysis, and evaluation of the dynamic characteristics of ultrasonic surface elastic wave propagation phenomena, we have enabled effective utilization tailored to the objectives (evaluation).

• Non-destructive testing
• Other measuring instruments
• others

---Optimization Technology for Ultrasonic Utilization---

The Ultrasonic System Research Institute provides the following services through its original products: ultrasonic systems (sound pressure measurement analysis, oscillation control). 1) Manufacturing and sales of ultrasonic systems (sound pressure measurement analysis, oscillation control) 2) Consulting services related to ultrasonic utilization technology << Manufacturing and Sales >> 1) Original product: Ultrasonic system (sound pressure measurement analysis, oscillation control) System overview (standard system): - Ultrasonic tester NA 10MHz type - Oscillation system 20MHz type Price: 281,050 yen (including tax: 10% consumption tax) 2) Degassing fine bubble generation liquid circulation device Device overview: - Magnetic pump (Iwaki Magnetic Pump MD series MD-70RZ) - Timer - Hose and others Price: 99,000 yen (including tax: 10% consumption tax) 3) Other (onsite support: delivery, installation, operation explanation, etc.) Consulting fees (Estimates will be proposed based on the conditions for onsite visits...)

• Other measuring instruments

Control system using ultrasonic oscillation probe and receiving probe.

The Ultrasonic System Research Institute has developed a megahertz ultrasonic oscillation control system that applies acoustic characteristic analysis and evaluation technology related to the manufacturing of original products: ultrasonic oscillation probes. This is a new application system for cleaning, modification, inspection, and more, utilizing ultrasonic waves. It is also possible to apply control through the combination of low-frequency vibrations and sounds. Developed from an engineering (experimental and technical) perspective on elastic waves and an abstract algebraic ultrasonic model, it serves as an applied system technology. The key point is the utilization method of surface elastic waves. By confirming the propagation characteristics of ultrasonic waves depending on the conditions of the target object (Note 1), it is important to address this as an original nonlinear resonance phenomenon (Note 2). Note 1: Propagation characteristics of ultrasonic waves - Nonlinear characteristics - Response characteristics - Fluctuation characteristics - Effects due to interactions Note 2: Original nonlinear resonance phenomenon This occurs when the generation of harmonics caused by original oscillation control is realized at high amplitudes through resonance phenomena, resulting in ultrasonic vibration resonance phenomena.

• Other measuring instruments
• Scientific Calculation and Simulation Software
• others

We have developed a "basic experimental system" for ultrasonic cleaning.

The Ultrasonic System Research Institute has developed a "Fundamental Experimental System" related to ultrasonic cleaning that applies the "ultrasonic system using degassing and microbubble control." - Experimental examples of the developed system - Confirmation of the cleaning effect of cavitation Confirmation of the acceleration effect Confirmation of the cleaning effect by acoustic flow Confirmation of the cleaning effect by liquid circulation Confirmation of the interaction between cavitation and liquid circulation Confirmation of the interaction between the cleaning object and the cleaning tank ..... Ultrasonic propagation characteristics 1) Detection of vibration modes (changes in autocorrelation) 2) Detection of nonlinear phenomena (changes in bispectrum) 3) Detection of response characteristics (analysis of impulse response) 4) Detection of interactions (analysis of power contribution rates) Note: "R" is a free statistical processing language and environment autocor: autocorrelation analysis function bispec: bispectrum analysis function mulmar: impulse response analysis function mulnos: power contribution rate analysis function

• Water Treatment
• Other analytical equipment
• others

Consulting support for the development of ultrasonic devices based on technology that controls surface acoustic waves through surface treatment of ultrasonic probe piezoelectric elements.

The Ultrasonic System Research Institute manufactures and sells ultrasonic systems utilizing the following original products: 1) Sound Pressure Measurement and Analysis System (Ultrasonic Tester) 2) Megahertz Ultrasonic Oscillation Control Probe 3) Ultrasonic Oscillation System (20 MHz type) Features of the Sound Pressure Measurement and Analysis System: Ultrasonic Tester 200 MHz type * Measurement (analysis) frequency range Specification: 0.01 Hz to 200 MHz * Capable of measuring surface vibrations * Continuous measurement for 24 hours * Simultaneous measurement of any two points * Display of measurement results in graph form * Includes software for time-series data analysis Overview Specifications of the Ultrasonic Probe Measurement range: 0.01 Hz to 200 MHz Oscillation range: 0.5 kHz to 25 MHz Propagation range: 0.5 kHz to over 900 MHz (confirmed and evaluated through analysis) Materials: Stainless steel, LCP resin, silicone, Teflon, glass, etc. Oscillation equipment example: Function generator Propagation Characteristics of the Ultrasonic Probe 1) Detection of vibration modes 2) Detection of nonlinear phenomena 3) Detection of response characteristics 4) Detection of interactions

• Non-destructive testing
• Other measuring instruments
• Other analytical equipment

Plating method using ultrasound and fine bubbles

The Ultrasonic System Research Institute, in collaboration with Japan Barrel Industry Co., Ltd., is implementing a "plating method" utilizing ultrasound and fine bubbles for plating treatment. This is a new ultrasonic control technology based on the measurement, analysis, and evaluation of ultrasonic propagation conditions, aimed at precision cleaning, processing, stirring, and inspection. By utilizing the acoustic properties (surface elastic waves) of various materials, ultrasonic stimulation can be controlled for several tons of structures and machine tools in a 3000-liter tank with an ultrasonic output of less than 20W. It was developed as an application method for nonlinear phenomena through an engineering (experimental and technical) perspective on elastic wave phenomena and an abstract algebraic ultrasonic model. The key point is the technology for utilizing surface elastic waves on the surface of ultrasonic elements. By confirming the ultrasonic propagation characteristics depending on the conditions of the target object (Note 1), it is important to address it as an original nonlinear resonance phenomenon. Note 1: Ultrasonic propagation characteristics 1) Detection of vibration modes (changes in self-correlation) 2) Detection of nonlinear phenomena (changes in bispectrum) 3) Detection of response characteristics (analysis of impulse response) 4) Detection of interactions (analysis of power contribution rates)

• Non-destructive testing
• Scientific Calculation and Simulation Software
• others

[To the owners of parking lots and parking lot construction companies] "I'm worried about not colliding with pedestrians when leaving the parking lot in my car..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Departure Warning Sensor] that detects vehicle departures using various sensors and alerts the surroundings with LED lights and buzzers. The device consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *Please note that a separate control panel including the controller and switching power supply (24V) is required when using the departure warning system. *We kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breakers, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. We hope this will contribute to safer vehicle passage for everyone. ◎ For more details, please contact us or download the catalog.

In recent years, with the increasing push for DX (digital transformation) and valuable feedback from all users in the field, we will be fully renewing "Compass PLUS." The new Compass PLUS will leverage its traditional strengths while completely revamping its design, functionality, and usability, thereby further enhancing its value in practical use. The official release is as follows, so please wait a little longer until then. 1) Improved visibility and operability 2) Enhanced intuitiveness 3) Streamlined information sharing These are the main points of improvement, and it will be available starting December 16, 2025. For an overview of the renewal, please download the materials. We are also planning an online briefing session, so please download the materials for more details as well. Renewal date: Tuesday, December 16, 2025 Temporary suspension period: Monday, December 15, 2025, 17:00 – 19:00 *Due to the renewal, data updates for observation devices (wave height, weather, water level, noise and vibration) will be suspended during the temporary suspension period. However, viewing of forecast information and other various information will still be possible as usual.

Based on practical experience in support companies and business companies, SBS Marketing Co., Ltd. provides consulting services related to marketing, sales promotion, and customer acquisition mainly in the BtoB (business-to-business) sector. On November 4, 2025 (Tuesday), they published a page titled "Is it easier to maintain 'competitive advantage' sustainably!? 'VRIO Analysis'". The 'VRIO Analysis' is a framework for understanding the advantages over competitors and the management resources held by a company. It explains the four components that make up the analysis, the differences from SWOT analysis, the advantages and disadvantages (points to note) of utilizing it, and the five steps of the analytical method. (Page Overview: Excerpts) ■ What is 'VRIO Analysis'? ■ The four components of 'VRIO Analysis' ■ Differences between 'VRIO Analysis' and 'SWOT Analysis' ■ Advantages of utilizing 'VRIO Analysis' ■ Disadvantages of 'VRIO Analysis' ■ The five steps of 'VRIO Analysis' (DL content only) ▼ For more details, please visit this page. https://sbsmarketing.co.jp/blog/vrio-analysis-2025-11/

In recent times, there has been a growing interest in infection control measures and facility hygiene management. Our company offers non-contact sensor products that are recommended for commercial facilities, food factories, and nursing and caregiving facilities. 【Sensors for Automatic Doors】 ● Light Touch Sensor HA-T401 … When you wave your hand in front of the automatic door, the sensor detects the movement and opens or closes the door. This is recommended for making doors with touch switches non-contact. ● Hand Wave Sensor PF-R5, PF-U2, DHS-1 … Opens and closes the automatic door by waving your hand in front of the sensor. ● Foot Switch PF-01S/01D/03S/05 … Opens and closes the automatic door by placing your foot in the opening. 【Access Control System】 ● Face Recognition + Unmanned Temperature Measurement DS Series … Allows for face recognition along with mask detection and body temperature measurement simultaneously. ● Automatic Disinfectant Spray Dispenser PHW-03B … Automatically sprays disinfectant when you wave your hand in front of the sensor. 【Nursing and Care Sensors】 ● Infrared Bed Exit Sensor "Just Place It Pole-kun" … This bed exit sensor is installed next to the bed and notifies via nurse call when the subject enters the detection range. ◎ For more details, please download the catalog or contact us.

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, or management: Are you facing any challenges with current issues or selecting the right sensors for parking management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Vehicle Detection Sensor Basic Guide This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document presents the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/