Technology for achieving ultrasonic propagation conditions above 900 MHz.

- Optimization technology for ultrasound through megahertz ultrasonic sweep oscillation control -

The Ultrasonic System Research Institute conducts the following activities with its original product: ultrasonic systems (sound pressure measurement analysis, oscillation control): 1) Manufacturing and sales of ultrasonic systems (sound pressure measurement analysis, oscillation control) 2) Consulting services for various equipment (Note): cleaning machines, stirring devices, processing equipment, machine tools, plating equipment, welding equipment, etc. << Manufacturing and Sales >> 1) Original product: Ultrasonic system (sound pressure measurement analysis, oscillation control) System overview (standard system): - Ultrasonic tester NA 10MHz type - Oscillation system 20MHz type 2) Degassing fine bubble generation liquid circulation device Device overview: - Magnetic pump (Iwaki Magnetic Pump MD series MD-70RZ) - Timer - Hose and others 3) Others (On-site support: delivery, installation, operation explanation, etc.) Consulting fees (Estimates will be proposed according to the conditions of the on-site visit) Ultrasonic propagation characteristics: 1) Vibration mode detection (auto-correlation) 2) Nonlinear phenomenon detection (bispectrum) 3) Response characteristic detection (analysis of impulse response) 4) Interaction detection (analysis of power contribution rate)

• pump
• Non-destructive testing
• Other measuring instruments

Surface treatment using ultrasonic surface elastic waves.

The Ultrasonic System Research Institute has developed (and published) methods to apply technologies using ultrasound and microbubbles for: 1) Relaxing residual stress near surfaces 2) Removing microscopic burrs in ultrasonic beauty devices. Through the technology that relaxes residual stress using ultrasound and microbubbles, we have experienced improvements in fatigue strength against metal fatigue, which leads to the uniformity of the surface of ultrasonic beauty devices and the efficiency of ultrasonic oscillation and propagation. This significantly changes the usage conditions of ultrasound (the dynamic characteristics of propagation frequency). In particular, the sound pressure level and propagation frequency of ultrasound vary greatly depending on the edge treatment of metal components that come into contact with the skin. By performing uniformity treatment, stable reproducibility and extended lifespan can be achieved. (This has been developed from achievements in ultrasonic cleaning.) We offer this technology as a consulting service.

• Water Treatment
• Vibration and Sound Level Meter
• others

- Feedback Analysis Using Autoregressive Models: Analysis of Power Contribution Rates - Effects of Tanks and Ultrasound, Cleaning Materials and Ultrasound, Adjacent Tanks, ...

Development of technology to measure, analyze, and evaluate the interaction of ultrasonic vibrations -- Feedback analysis of sound pressure data: Analysis of power contribution rate -- The Ultrasonic System Research Institute has developed technology to measure, analyze, and evaluate various interactions by analyzing time-series data obtained from ultrasonic sound pressure measurements. As a result, this has evolved into technology that optimizes ultrasonic utilization conditions based on the evaluation of interactions. Specifically, there are the following examples: 1) Optimization of selection criteria for ultrasonic oscillation frequency and output level 2) Optimization of ultrasonic oscillation control conditions 3) Optimization regarding the installation of tanks and ultrasonic (transducers) 4) Optimization of liquid circulation devices and control conditions 5) Optimization of design conditions for tanks and ultrasonic systems 6) Optimization of cleaning solutions, detergents, solvents, etc. 7) Optimization with adjacent tanks, jigs, etc. It is possible to develop original ultrasonic systems tailored to specific purposes.

• Vibration and Sound Level Meter
• Scientific Calculation and Simulation Software
• others

New ultrasonic dynamic control technology

The Ultrasonic System Research Institute has developed a completely new dynamic control technology for ultrasound using two function generators. This technology enables the control of ultrasonic nonlinear phenomena and resonance phenomena through different types of (sweep) oscillation using two different waveforms. By applying this technology, we are developing practical methods to relieve surface residual stress in components and various application technologies, and we provide consulting services. Standard settings: 1) Sweep oscillation control from 3 MHz to 20 MHz 2) Sweep oscillation control from 60 kHz to 13 MHz 3) Ultrasonic dynamic control using a 42 kHz 35W ultrasonic cleaner (realizing dynamic fluctuation-type ultrasonic propagation control) Note: Regarding the surface of the ultrasonic cleaner's tank, surface residual stress relief and uniform treatment are performed using an ultrasonic oscillation control probe and a degassing fine bubble generation liquid circulation device. As a result of the uniformization effect, ultrasonic control using harmonics above 200 MHz has been achieved.

• Vibration and Sound Level Meter
• Scientific Calculation and Simulation Software
• others

Relaxation and homogenization treatment of surface residual stress using ultrasound and microbubbles!!

The Ultrasonic System Research Institute has developed (and published) a method to adapt technology for relaxing residual stress near surfaces using ultrasound and microbubbles to ultrasonic transducers. The technology for relaxing residual stress through ultrasound and microbubbles has led to improvements in fatigue strength against metal fatigue, which in turn contributes to the uniformity of the surface of ultrasonic transducers and the efficiency of ultrasonic oscillation, significantly changing the usage of ultrasound. In particular, in ultrasonic cleaning using detergents and solvents, ultrasound has been effectively controlled to achieve reflection, refraction, and transmission according to the acoustic characteristics of the target object by setting conditions tailored to the purpose. This technology will be offered as a consulting service. Ultrasonic propagation characteristics: 1) Detection of vibration modes (changes in autocorrelation) 2) Detection of nonlinear phenomena (changes in bispectrum) 3) Detection of response characteristics (analysis of impulse response) 4) Detection of interactions (analysis of power contribution rates) Note: "R" is a free statistical processing language and environment. autcor: autocorrelation analysis function bispec: bispectrum analysis function

• pump
• Other measuring instruments
• others

Leading to new applications of ultrasound from sound pressure and vibration data of ultrasound.

Application of ultrasonic sound pressure measurement, analysis, and evaluation technology The Ultrasonic System Research Institute has developed a method for the analysis and evaluation of ultrasound (system technology) that applies measurement, analysis, and control technology related to the nonlinearity of ultrasound. Using this technology, we will provide measurement, analysis, and evaluation support for ultrasonic devices. For specific support and costs, please contact us via email. *Comment* Currently, regarding the use of ultrasound, I believe it is very difficult to detect and confirm the optimal ultrasonic state for the intended purpose. Therefore, by incorporating "sound pressure data" into the daily management of ultrasound, we aim to resolve the relationship with the final evaluation state (defect rate, yield, etc.) through the accumulation and analysis of statistical data. By analyzing using time-series data analysis technology, effective improvements have been realized. As a result of continuing such improvements, the number of successful cases using low-output ultrasonic oscillation control has increased. We have been manufacturing and selling our original product: ultrasonic systems (sound pressure measurement analysis, oscillation control) since March 2021.

• Non-destructive testing
• Other measuring instruments
• others

We will disclose the manufacturing know-how of ultrasonic probes - applying feedback analysis technology, ultrasonic sound pressure data analysis technology.

The Ultrasonic System Research Institute manufactures and sells the "Ultrasonic Tester NA (Recommended Type)," which makes ultrasonic measurement and analysis easy. We provide manufacturing technology and data analysis evaluation technology, including know-how for this system. System Overview (Recommended System: Ultrasonic Tester NA) Contents: - One dedicated probe for measuring sound pressure of ultrasonic cleaners - One general-purpose ultrasonic measurement probe - One oscilloscope set - One set of analysis software, manuals, and various installation sets Features: - Measurement (analysis) frequency range: Specification from 0.1 Hz to 10 MHz - Ultrasonic oscillation: Specification from 1 Hz to 100 kHz - Capable of measuring surface vibrations - Continuous measurement for 24 hours - Simultaneous measurement of any two points - Measurement results displayed in graphs - Analysis software for time-series data included This is a measurement system using ultrasonic probes. The ultrasonic probe is attached to the target object for oscillation and measurement. The measured data is analyzed considering position, state, and elastic waves, detecting various acoustic performances.

• Water Treatment
• Measurement and analysis equipment leasing and rental
• others

Consulting support for the development of ultrasonic devices based on technology that controls surface acoustic waves through surface treatment of ultrasonic probe piezoelectric elements.

The Ultrasonic System Research Institute manufactures and sells ultrasonic systems utilizing the following original products: 1) Sound Pressure Measurement and Analysis System (Ultrasonic Tester) 2) Megahertz Ultrasonic Oscillation Control Probe 3) Ultrasonic Oscillation System (20 MHz type) Features of the Sound Pressure Measurement and Analysis System: Ultrasonic Tester 200 MHz type * Measurement (analysis) frequency range Specification: 0.01 Hz to 200 MHz * Capable of measuring surface vibrations * Continuous measurement for 24 hours * Simultaneous measurement of any two points * Display of measurement results in graph form * Includes software for time-series data analysis Overview Specifications of the Ultrasonic Probe Measurement range: 0.01 Hz to 200 MHz Oscillation range: 0.5 kHz to 25 MHz Propagation range: 0.5 kHz to over 900 MHz (confirmed and evaluated through analysis) Materials: Stainless steel, LCP resin, silicone, Teflon, glass, etc. Oscillation equipment example: Function generator Propagation Characteristics of the Ultrasonic Probe 1) Detection of vibration modes 2) Detection of nonlinear phenomena 3) Detection of response characteristics 4) Detection of interactions

• Non-destructive testing
• Other measuring instruments
• Other analytical equipment

Control technology for acoustic flow (the main cause of ultrasonic effects: nonlinear phenomena) using ultrasound and fine bubbles.

The Ultrasonic System Research Institute has developed a method (system) for the <analysis and evaluation> of ultrasound, applying "measurement, analysis, and control" technology related to the nonlinearity of ultrasound. We provide consulting for a degassing microbubble generation liquid circulation system utilizing this technology. To utilize (control) the complex and changing conditions of ultrasound in a stable state, we conduct consulting to add the degassing microbubble generation liquid circulation system to specific tanks present on-site. 1: Explanation of principles 2: Specific proposals tailored to the cleaning machine (device) 3: Explanation of know-how 4: Explanation of verification methods, adjustment methods, and maintenance methods Development of nonlinear vibration control technology using fine bubbles and megahertz ultrasound Regarding this technology, we provide consulting as "vibration measurement technology utilizing ultrasound." Ultrasound propagation characteristics: 1) Detection of vibration modes (changes in self-correlation) 2) Detection of nonlinear phenomena (changes in bispectrum) 3) Detection of response characteristics (analysis of impulse response characteristics) 4) Detection of interactions (analysis of power contribution rates)

• pump
• Other analytical equipment
• others

An ultrasonic system that easily controls the oscillation of megahertz ultrasound—applying technology to evaluate the propagation characteristics of ultrasonic probes.

The Ultrasonic System Research Institute has developed a technology to control the nonlinear phenomena of surface elastic waves (ultrasonic vibrations) that propagate through the target object, using an original ultrasonic system (sound pressure measurement analysis, oscillation control). **Technology for Controlling Nonlinear Ultrasonic Vibration Phenomena** 1) Control setting technology that adjusts the oscillation output, waveform, and variations of the oscillation control using a function generator, tailored to the acoustic characteristics of the target object. 2) Manufacturing technology for an ultrasonic oscillation control probe that enables control of changes in ultrasonic oscillation voltage, including adjustments to the oscillation surface. 3) Manufacturing technology for an ultrasonic measurement probe that allows for the measurement of changes in ultrasonic vibrations at 100 megahertz, including adjustments to the oscillation surface. 4) Optimization technology for sweep oscillation conditions. Using the above technologies, we control (optimize) the propagation state of ultrasonic waves according to specific objectives. Note: The dynamic control of ultrasonic waves is performed based on the analysis and evaluation of sound pressure data related to nonlinear phenomena, considering the interaction between the acoustic characteristics of the target object and ultrasonic oscillation control. (Sound pressure measurement, analysis, confirmation, and evaluation are conducted using an ultrasonic tester.)

• Analysis and prediction system
• Other measuring instruments
• others

-- Ultrasonic System (Sound Pressure Measurement Analysis, Oscillation Control) --

The Ultrasonic System Research Institute manufactures and sells a system that combines the "Ultrasonic Tester NA (recommended type)," which allows for easy measurement and analysis of ultrasound, and the "Ultrasonic Oscillation System (20 MHz)," which enables easy control of ultrasonic oscillation. We propose system configurations (custom-made ultrasonic probes) tailored to the intended use (price and performance: cleaning, processing, stirring, inspection, etc.). Original Products: System Overview (Standard System) - Ultrasonic System (Sound Pressure Measurement and Analysis, Oscillation Control 10 MHz Type) - Ultrasonic Tester NA 10 MHz Type - Oscillation System 20 MHz Type Price: 281,050 yen (including tax: 10% consumption tax)

• Non-destructive testing
• Vibration and Sound Level Meter
• others

We have introduced our commercial aroma diffuser "Majesta Fragrance" at a karaoke bar located in the city. The model we installed is [MF-02S]. From the moment customers open the door, a gentle fragrance spreads throughout the store, enhancing the atmosphere. We hope to create a memorable store that customers will want to visit again through the use of fragrance. Majesta Fragrance is available for a free trial installation exclusively in the Kanto area. If you are interested in our fragrance services, please feel free to contact us.

We have introduced our Majesta Fragrance in the restrooms of a company located in the city. The model we implemented is the compact-sized MFmini. By adding fragrance to the clean space, we have created an environment where users can spend their time more comfortably. The restroom, which is used daily, has become a more pleasant and high-quality space.

Thank you very much for always using Majesta Fragrance. Our company will be open as usual during the Obon period. Please feel free to contact us for inquiries about scent arrangements or the introduction of commercial aroma diffusers.

High Strength, Low Cost: The Economic Advantages of Carbon Steel Frames Carbon steel is inherently strong, and this high structural strength ensures stable wind resistance while allowing for a simple support structure, reducing the need for extra components. This also lowers the wear rate during transportation, enabling further savings in material costs and installation expenses. Transportation and Construction: Streamlining the Entire Project The advantages of carbon steel frames are also evident in the transportation and construction phases. Standardized designs simplify on-site installation and shorten construction periods. For example, carbon steel frames can be packaged using a combination of wooden sticks and iron ties, improving unloading efficiency and increasing transport volume. This reduces construction time and labor costs, distributing the overall burden of the project across all stages. Technological Innovation: Breakthroughs in Corrosion Resistance With the evolution of material technology, the corrosion treatment of carbon steel frames has also significantly advanced. Grace Solar has adapted to the technological trends in process development, and all current carbon steel frames utilize AlMgZn coating. At the same time, to meet the special requirements of each project, our company offers custom options for hot-dip galvanizing.

#Intersolar South America - We invite you to attend the most influential solar energy event in Latin America. You will be able to see innovative solar mounting solutions designed for the Latin American market. At booth R2.82, Grace Solar will showcase how it is evolving regional solar projects: - Ground-mounted solar mounting systems suitable for Brazil's tropical storms and humid environments - Flexible roof installation systems that can accommodate diverse architectural needs Let's build the future of solar power together! Venue: Expo Center Norte, São Paulo, Brazil, Booth R2.82 Date: August 26-28, 2025