★★Thermosera Japan_Thin Film Experiment Equipment_"PRODUCTS GUIDE 2022"★★

High-performance multi-sputtering device 6-element multi-sputter (for Φ4 inch) 4-element multi-sputter (for Φ6, 8 inch)

Continuous multilayer film, simultaneous film formation (2-6 elements simultaneous film formation: RF, DC can be freely switched from HMI) High-power RF, DC power supplies, and pulse DC power supplies can be flexibly configured for multi-cathode using our unique 'Plasma Switching Relay' module, allowing for versatile applications. High-temperature substrate heating stage (double jacket water-cooled) options: -1) Max 600℃ (lamp heating) -2) Max 1000℃ (C/C composite) -3) Max 1000℃ (SiC coating) Reverse sputtering stage inside the load lock: -1) 300W, or -2) Soft-Etching (<30W) System main control: 'IntelliDep' control system Windows PC (or TP HMI) interface All operations are centrally managed from a single HMI screen.

• Air conditioning equipment
• Duct related equipment

USB connection type, parameter setting and data management with the included dedicated software. A wide range of wavelength options is available. Three models can be selected based on your purpose.

【Overview】 Connect to a Windows PC using the standard accessory "CalexConfig" and the included USB cable (1.8m), allowing for the configuration of sensor measurement parameters, analysis of measurement results, and CSV output on the PC. 1) 4-20mA output 2) USB output (operates on USB bus power) 3) Simultaneous use of 4-20mA/USB output These three usage methods are available. 【Features】 ◎ Simultaneous use of USB data logging and 4-20mA analog output ◎ Excellent basic performance: accuracy ±1%, reproducibility ±0.5%, 200msec fast response ◉ PUA2: Covers short wavelengths from 2.0 to 2.4μm, capable of measuring metal surfaces ◉ PUA5: Suitable for measuring glass surfaces at a wavelength of 5μm ◉ PUA8: General-purpose, applicable to a wide range of materials such as paper, wood, plastic, and textiles at a wavelength of 8-14μm

• Other security systems

USB-connected compact infrared temperature sensor, no power supply needed, powered by USB bus power from a PC, parameter settings and data management with the included dedicated software.

【Overview】 Install the standard accessory "Calexsoft," and then simply connect it to a Windows PC via a USB cable. You can easily set measurement parameters, conduct measurements, and analyze/export results in CSV format on your PC with a plug-and-play feel. USB output operates solely on USB bus power when connected to a PC, requiring no additional power supply. This expands its application range in various industrial fields and research laboratory experiments. 【Features】 ◎ USB data logging ◎ Wide range: -20°C to +1000°C ◎ Excellent basic performance: accuracy ±1%, reproducibility ±0.5%, 125 msec fast response ◎ Emissivity adjustment range: 0.2 to 1.0 ◎ Measurement wavelength range: 8 to 14 μm ◎ Compact size Φ18mm x 45mm

• Facility Management System

Easy setup with a high-performance touch panel converter, data logging, and data storage on a microSD card. PM2.2 measurements can also be taken on glossy metal surfaces.

**Overview** With a highly visible high-brightness touch panel display, parameters such as temperature range, emissivity, and sampling rate can be intuitively operated and set. Long-term data storage and management are possible with a microSD card. (*There is also an option for a converter without a display.) The compact sensor head measures φ18mm x 45mm, allowing for temperature measurements in tight spaces. It employs sensors and cables with excellent noise resistance, making it suitable for integration into moving devices such as robotic arms. The PM2.2 model uses a short wavelength of 2.2um, capable of measuring high temperatures (Max 2000℃) and glossy metallic surfaces. **Features** ◎ Wide range: -20 to 1000℃ (PM), 100 to 2000℃ (PM2.2) ◎ Excellent basic performance: Accuracy ±1%, Repeatability ±0.5%, 240msec fast response ◎ Measurement wavelength range: 8 to 14μm (PM), 2.0 to 2.2μm (PM2.2) ◎ Compact Φ18mm x 45mm

• Facility Management System

TIIS (Technical Institution of Industrial Safety) certification obtained for intrinsically safe explosion-proof radiation temperature sensor, suitable for use in hazardous locations (Zone 0, 1, & 2).

ExTemp is an intrinsically safe explosion-proof radiation temperature sensor that can be used in hazardous material handling equipment and factories such as petrochemical plants, pharmaceutical factories, and chemical plants. (TIIS Type Certification Number: 21097)

• Other measuring instruments

Parameters such as temperature range, emissivity, and alarms can be set using a smartphone or tablet, allowing for easy configuration without the need for a display instrument or power supply for the instrument.

● You can use a smartphone or tablet to perform the settings. ● Download the dedicated app for free from Google Play (Android 4.1 to 5.1). ● Using Android's NFC communication, simply touch the sensor part to read and write data. ● Ultra-compact sensor (Φ31mm x t29mm) allows temperature measurement in narrow spaces. ● Fast response time of 125 msec, high accuracy of ±1.5%. ● Voltage output (0-5V or 0-10V), or K thermocouple output.

• Other measuring instruments

Compact measurement, robust body, high precision ±1%, 240msec high response. It can be applied for various purposes such as industrial machine control and temperature monitoring in production sites.

**Overview** The "PyroCouple" from UK-based Calex Electronics is a compact, lightweight, low-cost, and high-performance infrared temperature sensor unlike any other. It can non-contact measure the surface of objects that are "moving," "rotating," or "cannot be touched," allowing for fast and highly reproducible temperature control. **Features** ◎ Integrated amplifier and sensor ◎ 4-20mA output (standard), 0-50mV, thermocouple K, J, T output (optional) ◎ Accuracy: ±1% or ±1℃ (whichever is larger) ◎ Reproducibility: ±0.5% or ±0.5℃ (whichever is larger) ◎ Response time: 240msec ◎ Protection rating: IP65

• Other security systems

We would like to inform you that, in order to further strengthen and enhance our sales and service operations, there will be changes to our Nagoya Sales Office as of April 1st, as detailed below. ■ Relocation of Nagoya Sales Office 【New Address】 〒460-0003 6th Floor, Sando Building, 1-7-27 Nishiki, Naka Ward, Nagoya City, Aichi Prefecture TEL: 052-212-6520 / FAX: 052-212-6521 *Please note that the TEL and FAX numbers will also change. Taking this opportunity, all of our staff will continue to make even greater efforts. Please feel free to contact us.

To combat heatstroke during the summer, Sysmet Co., Ltd. has started providing black globe thermometers again this year. Differences from conventional black globe thermometers: - 17-day ahead heat index (WBGT) forecast with a 500m mesh - 1-minute updates of heat index (WBGT) measurements compliant with JIS standards - Email alerts when threshold values are exceeded, along with alarm devices (electronic display boards, rotating lights) and notifications via direct LINE WORKS, etc.

We will introduce the implementation results of the sensor technology developed by the Hotron Group, which has been cultivated over more than half a century, through customer case studies. In addition to automatic door sensors, we also offer a wide range of vehicle detection sensors and nursing/care sensors. We have many implementation examples available, so please take a look at the case study page.

■ Evaluation Points of the Award-Winning Work "OPELAIII Cx" A rigorous evaluation was conducted by 129 design experts from approximately 10,000 submitted designs from 68 countries and regions around the world. Our "OPELAIII Cx" received high praise in the following three pillars, leading to its award. Innovative Innovation: A new approach that is not bound by existing concepts has realized the [wearable shadowless lamp]. Thorough Usability: Based on a comprehensive user perspective, we pursued intuitive and stress-free excellent operability. Design Pursuing Ergonomics: From material selection to the details of product design, we prioritized the health and comfort of doctors around the world who work in harsh environments. We thoroughly implement ergonomics to reduce physical strain and maximize performance. Details of the award-winning work are published on the official iF design portal site at https://ifdesign.com/en/winner-ranking/project/opelaiii-cx/739885.

This product is a light source device utilized in a wide range of processes such as curing, surface treatment, sterilization, analysis, and material evaluation using ultraviolet (UV) light. With stable light output and an easy-to-handle design, it can be widely used from manufacturing sites to research and development fields. Depending on the application, you can select the type and output of the lamp, ensuring stable processing quality. Main UV lamp light source products: 1. Excimer light source Covers special wavelength ranges that cannot be achieved with LEDs, making it ideal for research and evaluation applications requiring specific wavelengths, such as semiconductor and material evaluation, surface modification, and photochemical reactions. 2. Low-pressure mercury lamp light source Emits high-energy short-wavelength UV, used in various fields such as sterilization, surface cleaning, resin pretreatment, analytical devices, and environmental measurement instruments. 3. High-pressure mercury lamp and metal halide lamp light source (for UV curing devices) Compatible with resins that are difficult to cure with LEDs, it plays a significant role in the adhesion, printing, and coating processes of UV-curable resins, as well as in the manufacturing of electronic components and the curing processes of optical materials. It also supports selection tests for light sources and filters, proposing optimal irradiation conditions tailored to resin characteristics. Custom specifications are also available. Please feel free to consult us regarding irradiation range and required functions.