Exhibiting at the 【TIC】 online exhibition platform.

Tilt the two air knives slightly and present a blowing method that focuses on the torso and upper part.

The air knife's gap or slot can be adjusted in length to allow for a wider gap. This means that the air knife concentrated on the body can maintain a standard gap while separately adjusting the knife's gap at the top and bottom to hit the handle and the lower ring. This method not only ensures that the air effectively hits the body of the canister but also reduces the required power consumption. SONIC has also suggested further cost reductions by using ABS piping instead of plated steel pipes to lower prices. [Content] [Issues] ○ Yankee Gas faced the problem of propane gas canisters not being sufficiently dry before going to the painting process while changing their solvent-based painting system. ○ Proper drying of the canisters is essential for effective painting. ○ The drying method they were using involved compressed air, which was ineffective and did not adequately remove moisture for painting. ○ High humidity means that no matter how much compressed air is applied, moisture remains on the canisters. For more details, please contact us or download the catalog.

• Conveyor

There was no need for additional construction, and it fit into the existing production line.

Sonic Corporation decided to operate the Sonic150 with 25 horsepower and two air knives, and to circulate air to raise the temperature coming from the air knives. The concept behind Sonic Corporation's revolutionary VT (patent pending) design is to utilize the pressure heat from the blower by partially circulating air. The exit temperature from the air knife will be approximately 45°C to 50°C. This method does not require an external thermal system. The air knife is installed about 10mm away from the bottle, allowing the bottle to pass through at a wind speed of approximately 9,300m/min. The high-speed air and heated exit temperature melt the ice and turn the remaining moisture into mist. As a result, the bottles can be completely dried. [Content] [Issues] ○ Moisture and cold air leave water droplets on the glass, resulting in the reformation of droplets before labeling. ○ Labels cannot be applied until the bottles are dried. ○ The injection and labeling of bottles can only occur after the empty bottles are stacked in a warmed warehouse and heated. For more details, please contact us or download the catalog.

• others

I have made it possible to repeatedly position the air knife.

We proposed 12 Sonic 70 blowers with 7.5 horsepower motors, enclosures, Sonic HEPA filters, and two custom 13" Sonic XE air knives. The performance of the air knives delivered at the beginning of this system perfectly matched the blow level requested by the customer. The results of the impurity contamination tests also confirmed that Sonic's HEPA filters maintained the requested 0.3μ. Additionally, to operate most effectively while keeping the noise level below 80dB, the angle and distance of the air knives are very important, so we manufactured custom Sonic air knives that fit the existing air knife enclosures, allowing for repeated positioning of the air knives. [Content] [Issues] - Compressed air with HEPA filters - The factory was using more compressed air for automatic devices on the production line and other equipment on a daily basis - Due to the increased demand for compressed air, there was a need to add another air compressor to avoid pressure drops For more details, please contact us or download the catalog.

• Conveyor

It has been proven to be the most cost-effective solution.

Sonic Corporation proposed a method to install a rotating air knife (patented) from above and a standard air knife from the side, angled from top to bottom. Due to the low production speed and the complex shape of the engine block, the rotating air knife has proven to be suitable. The rotating air knife can achieve a rotational speed of 200 rpm. By rotating the air knife and then blowing, it can deliver multiple high-impact blows to the surface of the parts with a single air knife. In cases of such complex shapes, attempting to achieve the same drying with other methods would require the installation of six air knives. This technology has proven to reduce horsepower and provide the most cost-effective solution while utilizing limited space. [Content] [Issues] - The surface of the engine block has many complex irregularities, and if water remains in these areas, it can ultimately lead to defective products. - The factory has found existing drying methods to be inefficient and is seeking an urgent solution. For more details, please contact us or download the catalog.

• Conveyor

Non-contact water removal and drying of wire cables using Sonic Corporation's blower and air knife.

We would like to introduce a successful application of the Sonic SP Dryer cable drying machine. A manufacturer of low-voltage wires and cables, as well as bare aluminum and copper wires, needed to install a spark tester before the final packaging process. This meant that the wire running at 3000 feet per minute (900 m/min) had to be completely dried before the spark test. Due to the rapid increase in line speed, traditional methods became costly and inefficient. If the cable is not completely dried, the inspection machine may misidentify it as defective. Because of the high-speed production at 3000 feet per minute (900 m/min), Sonic recommended the SP dryer. This is a drying device housed in a box that features air knife technology (XE 42” long) with a centrifugal blower (Sonic 150, 20 horsepower) to achieve energy savings. For more details, please contact us or refer to the catalog.

• others

Using it before the final drying provided results that exceeded expectations in terms of drying effectiveness.

Sonic Corporation's 96” (2.44m) air knife operates with the Sonic 100 (15 horsepower motor). Long steel plates flow under the air knife at a speed of 1.22m/min to 3.05m/min. The widths of these steel plates range from 48” to 96” (1.22m to 2.44m). Typically, this line runs for several days in two shifts and then stops for several days. Essentially, it operates continuously without stopping during the given shifts. This system provides unparalleled satisfaction to customers and has demonstrated exceptional drying effectiveness when used before final drying to blow away a significant amount of residual water. [Content] [Issues] ○ After blasting the material, it needs to be wiped and all remaining sand particles must be completely blown away. ○ In special cases, residual shot may occur after passing through the cleaning brush. ○ Residual shot material sticks to large electromagnetic surfaces, making transportation hazardous. For more details, please contact us or download the catalog.

• others

"Sonic" water drainage drying is Sonic! We are introducing success stories and photos. [Simplified version]

This is a collection of case studies on Sonic Corporation's blower air knife systems. As success stories, we introduce how the Sonic air knife system provided technical solutions to issues such as labeling problems, removal of residues in the steel industry [removal of residues on plates], drying of automotive cylinders, insufficient drying of propane gas cylinders, and removal of residual water after cleaning contact lens pallets. We also include photographs. For more details, please contact us or refer to our catalog. We also have demo units available. You can try them out at your factory! Alternatively, you can conduct simple tests at our company! Please consider this!

• others

"Sonic" water drainage drying is Sonic!! We are introducing case studies, conceptual installation diagrams, and photos.

This is a case study of Sonic Corporation's blower and air knife systems. As success stories, we introduce how the Sonic air knife system provided technical solutions to issues such as labeling problems, removal of residues in the steel industry [on plates], drying of automotive cylinders, insufficient drying of propane gas cylinders, contamination of micro-particles due to static electricity in clean rooms, and removal of residual water after cleaning contact lens pallets. We also present conceptual installation diagrams and photos. For more details, please contact us or refer to the catalog. We also have demo units available. You can try them at your factory! Alternatively, we can conduct simple tests at our company! Please consider it!

• others

A product that suppresses water splashing generated during the inspection, printing, labeling, and water draining/drying of filled PET bottles, cans, bottles, and pouches before packaging.

The Sonic SMART Tunnel (Sonic Modular Air Tunnel) can be used in extensive water drainage drying systems. It is a turnkey product that dries PET bottles, cans, and bottles before inspection, printing, labeling, or packaging, with a processing capacity of 100 to 1500 CPM. Adaptability: The Sonic SMART Tunnel is a modular system. Due to its bolt-tight design, it can be easily expanded if changes in product size or additional air knife configurations are needed due to increased production line demands.

• others

Improved air knife of the conventional Tear Drop (tear-shaped) design! Enhanced blowing efficiency!!

■High-Speed XE Air Knife The Sonic Corporation's High-Speed XE Air Knife nozzle, further improved from the conventional Tear Drop shape, achieves excellent work efficiency. It efficiently laminarizes the air, resulting in minimal pressure loss and uniform blowing across the entire slot. A key feature is that there are no control plates inside the air knife, allowing for uniform blowing from end to end. Additionally, it effectively draws in the surrounding air to create a powerful blow. We offer a wide variety of options for the number, position, direction, and length of the nozzle's piping installation. We also provide the world's only rotary air knife.

• Conveyor

A specialized blower for draining/drying that uses a small motor to rotate at high speed and generate a large airflow!

Powerful air at over 25 m/s for water removal and drying! Additionally, time-saving and energy-efficient! Sonic Corporation's 'Blower & Air Knife' is a device that dramatically improves the efficiency of part drying, food processing drying, and water droplet removal. Processes that require a pressure of 400 kPa can be achieved with an ultra-high efficiency of just 29 kPa! It achieves a 75% reduction in energy consumption compared to compressor air, while maintaining a water removal efficiency of over 95%, resulting in significant energy savings. ≪Sonic Corporation Spiral Blower≫ 【Features】 ■ Lightweight and compact design ■ Generates a large volume of air with a small horsepower ■ Clean and dry air. Promotes evaporation with warm air at approximately 40°C ■ Energy-saving effects that greatly exceed those of compressors △▽△Basic Information△▽△ 【Product Lineup】 ■ Spiral Blower Thanks to proprietary technology, it generates a large airflow with energy efficiency compared to compressors and conventional blowers. The generated large airflow can be supplied continuously without pulsation. The structure is also easy to maintain.

• Conveyor

Blow away water, dust, and dirt from parts with high-speed air for quick drying. Demo units are also available for loan!

Water removal drying with Sonic Corporation's blower and air knife! By rotating the fan inside the blower at a minimum of approximately 12,000 rpm to 20,000 rpm, it is possible to achieve a larger airflow than that of compressors or domestic blowers. Additionally, another major feature of the Sonic air knife system is its economical nature, consuming only a fraction of the power compared to similar operations using conventional compressed air. Environmentally, it not only operates at low noise levels but also contributes to the reduction of carbon dioxide emissions due to its low power consumption. Demo units are available for loan, so please feel free to contact us. 【Demo Units】 ★ Unit 1 (Sonic 70) Flow rate: 3 Nm³/min to 13 Nm³/min Motor size: 5.5 kW *With inverter ★ Unit 2 (Sonic 85) Flow rate: 4 Nm³/min to 20 Nm³/min Motor size: 7.5 kW *With inverter ★ Air Knife Total length: 610 mm Maximum wind speed: approximately 170 m/sec Connection diameter: 3 inches Slit width: approximately 1 mm Note: Please contact us if a hose is needed.

• Conveyor

Sonic's blowers and air knives use high-speed air of up to 25.4 m/sec for water removal and drying! Energy-saving blowers! Demo units available for loan!

Are there any issues with the water drainage and drying processes for beverages, food, and food processing, as well as the blowing off of water droplets from cans, bottles, and PET bottles? ------ Such issues can be efficiently and economically resolved by the Sonic Air Knife System's high air volume and high-speed air! Tasks that previously required pressure like that of a compressor can now be achieved with just 29 kPa! When comparing the air volume of a compressor and a Sonic Blower, obtaining an air volume of 7 m³/min requires 62.5 horsepower from a compressor, whereas the Sonic Blower achieves this with only 4 horsepower. The difference is significant when compared to compressors and domestic blowers! 【Features】 ● Energy-saving effect reduces consumption by 75% compared to compressor air ● Water drainage efficiency of over 95% ● Generates a large volume of air with low horsepower ● The air is clean and dry, promoting evaporation with warm air at approximately 40°C ● Energy-efficient (compared to compressors) ● Lightweight and compact design *Demo units are available for loan, so please feel free to contact us. Additionally, if you can provide samples for testing, we will conduct tests at our company.

• others

Seeing is believing! Improve drying and reduce running costs by using high-speed air knives to remove water from air discharged by high-volume blowers!

Is there any problem with the Sonic food processing drying process and the blowing off of water droplets from cans/bottles? After sterilization and filling, it is also used for draining water before printing expiration dates on PET bottle caps, cans, retort packs, and for drying transport boxes. It is utilized in various industries, not only in the food sector but also for drying water from automotive parts, steel plates and pipes, and semiconductor components. The Sonic Air Knife System's high air volume and high-speed air efficiently and economically solve these problems! For those who have not been able to resolve these issues until now... we have numerous case studies for problem-solving! ***Videos will be updated regularly*** [Case Studies] - Examples for the food/beverage industry - Examples for the automotive industry - Examples for the pharmaceutical industry - Examples for the steel industry, etc. For more details, please contact us or download the catalog.

• container

A new challenge with the Sonia Corporation's low-flow ultrasonic spray nozzle!

Low Flow Ultrasonic Spray Nozzle (Atomizer) The low flow spray nozzle (atomizer) manufactured by Sonia is designed to apply droplets (particles) of various viscosities in micron and submicron sizes without over-applying them to small parts. The nozzle shape comes in two types: flat and wide nozzle tips. It is suitable for concentrated application using an ultrasonic spray nozzle and a pinpoint air transport device (custom order) or for transporting very small droplets (particles). These spray nozzles can be easily applied to applications requiring controlled coating and uniform films. The spray nozzle is lightweight and ideal for coating systems using robots. The main body of the spray nozzle is made of stainless steel. *Custom micro feed tubes are suitable for low flow application and are available in stainless steel or PTFE fluororesin. The spray nozzle can be equipped with a spray shaper for pinpoint spraying or a wider spray for better coating control. *Micro feed tubes are optional items.

• others

Flow spray of 2 mmlit/min or less is now possible!

【Sonaer】 Low flow spray nozzle manufactured by Sonia Corporation It can focus on small parts without waste by creating micron and submicron particles. There are two types of nozzles: flat and wide spray tips. These nozzles are ideal for pinpoint spray shaping, allowing for precise particle focus and minimizing solution waste. With these nozzles, coating control becomes possible, easily adapting to applications that require thin and uniform application. This nozzle is lightweight, making it attractive for use in robotic coating systems. The nozzle is available in a lightweight black aluminum case (custom-made) or a stainless steel case with a stainless steel inner feed tube. The micro feed tube can be used for microliter capacities and is available in stainless steel and PTFE. The nozzle can utilize a spray shaper for pinpoint spraying, providing better control over your coating applications.

• others

The air nozzle manufactured by Lehler, affectionately known as the Multi-Channel Jet, features three key attributes: low noise, energy efficiency, and high functionality.

In many industries and factories, the use of compressed air for operations has become essential. Air is utilized in various fields such as cleaning, blow-off, drying, and conveying. When air pressure is not controlled, annoying noise caused by high frequencies often occurs, leading to problems. This noise is due to turbulence at the air flow exit of the nozzle, and its intensity is related to the shape of the nozzle orifice and the air pressure. Therefore, the higher the air pressure, the greater the harmful noise, which in turn increases the amount of air used, making it uneconomical. Lechler's multi-channel jet (air nozzle) significantly reduces noise levels while featuring high blowing power and low air consumption. The multi-channel jet is based on dividing the air flow into several air jets. The 116-hole orifice, designed to optimize air flow conditions, produces particularly uniform and straight powerful air jets. For more details, please contact us or refer to the catalog. You can download the English version of the catalog. *Lechler GmbH is a German spray nozzle manufacturer.

• Conveyor

The noise level is reduced by about 60%! This air nozzle can be used not only in general industries but also in food service and healthcare.

Lechler multi-channel jet (air nozzle) A new low-noise flat jet nozzle has been introduced for the multi-channel jet! When replaced with a 4mm pipe, the noise level is reduced by approximately 60%. Air consumption can also be reduced by about 33%. The new air nozzle 'FL-600SY' is suitable for draining water, blowing away debris, and drying in very tight spaces with flat air. By using SUS-316L material, it has become a product that can be used not only in general industry but also in food service and medical applications. ◆ For product details, please refer to the catalog or contact us. *Lechler GmbH is a German spray nozzle manufacturer.

• Conveyor

Freely and precisely fixed to the blow area.

Material: Polyacetal resin The flexible hose can be fixed to the desired location for blowing freely and can be used in a wide temperature range from -30°C to 80°C. This product comes equipped with the FL-600H multi-channel jet (air nozzle). * The current model has an orange tip on the flexible hose and a dark blue body. * The screw standard on the piping connection side is PT (the nozzle connection side is PF).

• Conveyor

Freely and precisely fixed to the blow area.

Material: Polyacetal resin The flexible hose can be fixed to the desired blowing area and can be used in a wide temperature range from -30°C to 80°C. This product comes equipped with a multi-channel jet (air nozzle) FL-600E. * The current model has an orange tip on the flexible hose and a dark blue connector. * The screw standard on the piping connection side is PT. (The nozzle connection side is PF.)

• Conveyor

Freely and precisely fixed to the blow area.

Multi-channel jet (flex hose) Material: Polyacetal resin The flex hose, which can be fixed to any desired blowing location, can be used over a wide temperature range from -30°C to 80°C. Dedicated flex hose for Lechler's multi-channel jet (air nozzle) Can be connected with 1/4" male thread. *Lechler GmbH is a German spray nozzle manufacturer. *The current product has an orange tip and a dark blue body. *The thread standard on the piping connection side is PT (the nozzle connection side is PF).

• Conveyor

Best-selling Rehiller Company air nozzle FL-600E's sister product, ultra-compact round type, made of stainless steel SUS316L (5mm type).

Lechler multi-channel jet (air nozzle) The air emitted is laminar, which not only allows for powerful impact force but also reduces noise levels. Additionally, by utilizing laminar flow, the amount of air consumption can be minimized. In other words, it is an energy-saving product. The blow pattern is straight (7mm width). *Lechler GmbH is a German spray nozzle manufacturer.*

• others

Best-selling Rehiller Company air nozzle FL-600E's sister product, ultra-compact round type, made of stainless steel SUS316L (4mm type).

Rehira's multi-channel jet (air nozzle) allows for a laminar airflow, which not only provides powerful impact force but also reduces noise levels. Additionally, by utilizing laminar flow, the amount of air consumption can be minimized. In other words, it is an energy-saving product. The blow pattern is straight (7mm width).

• others

Best-selling air nozzle by Rehiller, FL-600E's sister product, small round type.

Lechler multi-channel jet (air nozzle) The air emitted is laminar, which not only provides powerful impact force but also reduces noise levels. Additionally, by maintaining laminar flow, the amount of air consumption can be minimized. In other words, it is an energy-saving product. *Lechler GmbH is a German spray nozzle manufacturer.*

• others

Best-selling air nozzle FL-600E by Rehiller, sister product, round type, made of zinc material.

Lechler multi-channel jet (air nozzle) The air emitted is laminar, which not only minimizes impact force but also reduces noise levels. Additionally, by achieving laminar flow, the amount of air consumed during use can also be reduced. In other words, it is an energy-saving product. *Lechler GmbH is a German spray nozzle manufacturer.*

• others

Best-selling Rehiller air nozzle FL-600E's sister product, round type.

Lechler multi-channel jet (air nozzle) The air emitted is laminar, which not only minimizes impact force but also reduces noise levels. Additionally, by achieving laminar flow, the amount of air consumed during use can also be minimized. In other words, it is an energy-saving product. *Lechler GmbH is a German spray nozzle manufacturer.*

• others

Sister product of the best-selling Rehiller air nozzle FL-600E, offered in stainless steel 316L, wide type FL-600ST.

Lechler multi-channel jet (air nozzle) The air emitted is laminar, which not only minimizes impact force but also reduces noise levels. Additionally, by achieving laminar flow, the amount of air consumed during use can also be minimized. In other words, it is an energy-saving product. The multi-channel jet model FL-600STW generates a very wide and powerful impact force. This nozzle is made of stainless steel 316L, allowing it to be used in high-temperature environments. The protruding tip of the nozzle prevents air from penetrating human skin. This nozzle complies with OSHA standards. *Lechler GmbH is a German spray nozzle manufacturer.*

• others

Best-selling Rehiller Company Air Nozzle Multi-Channel Jet Series Flat Type Extra Large

Lechler multi-channel jet (air nozzle) The air emitted is laminar, which not only minimizes impact force but also reduces noise levels. Additionally, by achieving laminar flow, the amount of air consumption can also be minimized. In other words, it is an energy-saving product. *Lechler GmbH is a German spray nozzle manufacturer.*

• others

Best-selling Rehiller Company Air Nozzle Multi-Channel Jet Series Flat Type Outlet Two-Phase Type (FL-600FK Sister Product)

Lechler multi-channel jet (air nozzle) The air emitted is laminar, which not only minimizes impact force but also reduces noise levels. Additionally, by achieving laminar flow, the amount of air consumed during use can also be minimized. In other words, it is an energy-saving product. *Lechler GmbH is a German spray nozzle manufacturer.*

• others

Best-selling Rehiller Company Air Nozzle Multi-Channel Jet Series Flat Type

Lechler multi-channel jet (air nozzle) The air emitted is laminar, which not only minimizes impact force but also reduces noise levels. Additionally, by achieving laminar flow, the amount of air consumed during use can also be minimized. In other words, it is an energy-saving product. *Lechler GmbH is a German spray nozzle manufacturer.*

• others

Best-selling Rehiller Company air nozzle FL-600E's sister product, super large round type.

Rehira's multi-channel jet (air nozzle) allows the air to flow in a laminar manner, enabling not only powerful impact force but also a reduction in noise levels. Additionally, by maintaining laminar flow, it is possible to reduce the amount of air consumed during use. In other words, it is an energy-saving product.

• others

Best-selling Rehiller Company Air Nozzle Multi-Channel Jet Series Flat Type

Rehira's multi-channel jet (air nozzle) allows for laminar flow of the expelled air, which not only minimizes impact force but also reduces noise levels. Additionally, by maintaining laminar flow, it is possible to decrease the amount of air consumed. In other words, it is an energy-saving product.

• others

Sister product of the bestselling Rehiller air nozzle FL-600E, offered in stainless steel 316L.

Multi-channel jet (air nozzle) manufactured by Lehira The air ejected is laminar, which allows for minimal impact force and reduces noise levels. Additionally, by maintaining laminar flow, the amount of air consumed during use can also be minimized. In other words, it is an energy-saving product. This is an air nozzle made of stainless steel 316L, a sister product of the FL-600E. Being made of stainless steel allows for use in high-temperature environments while providing a powerful impact force.

• others

Sister product of the bestselling Rehiller air nozzle FL-600E, made of PP material.

Lechler multi-channel jet (air nozzle) The air emitted is laminar, which not only minimizes impact force but also reduces noise levels. Additionally, by achieving laminar flow, the amount of air consumed during use can also be minimized. In other words, it is an energy-saving product. *Lechler GmbH is a German nozzle manufacturer.*

• others

Sister product of the bestselling Rehiller air nozzle FL-600E, a type with half the spray width.

Lechler multi-channel jet (air nozzle) The air emitted is laminar, which not only minimizes impact force but also reduces noise levels. Additionally, by achieving laminar flow, the amount of air consumed during use can also be minimized. In other words, it is an energy-saving product. *Lechler GmbH is a German spray nozzle manufacturer.*

• others

Sister product of the best-selling Rehiller air nozzle FL-600E, offered in aluminum material.

Lechler multi-channel jet (air nozzle) The air emitted is laminar, which not only minimizes impact force but also reduces noise levels. Additionally, by maintaining laminar flow, the amount of air consumed during use can also be minimized. In other words, it is an energy-saving product. *Lechler GmbH is a German spray nozzle manufacturer.*

• others

Sister product of the best-selling Rehiller air nozzle FL-600E, offered in POM without pigments.

Lechler multi-channel jet (air nozzle) The air emitted is laminar, which not only minimizes impact force but also reduces noise levels. Additionally, by achieving laminar flow, the amount of air consumed during use can also be minimized. In other words, it is an energy-saving product. *Lechler GmbH is a German nozzle manufacturer.*

• others

World's No. 1, air nozzle with orifice cover. An air nozzle that achieves strong impact force with laminar flow. One of the best-selling products.

Rehiler Multi-Channel Jet (Air Nozzle) ≪Product Features≫ The air emitted is laminar (a well-structured airflow), which not only minimizes impact force but also reduces noise levels. Additionally, by maintaining laminar flow, the amount of air consumed is minimized, and even when pressure is lowered, the impact force does not decrease. In other words, this product contributes to energy savings and noise reduction. The blow pattern is straight (47mm width). ≪Significant Differences from Other Products≫ This product comes with an orifice cover (discharge hole adjustment plug). By using the orifice cover, it is possible to adjust the necessary air holes and suppress unnecessary air, making it a world-class product. ≪≪For Energy Savings, High Efficiency, and Solving Noise Issues!≫≫ - Is the impact force sufficient? - Have you resolved the noise issues generated by the air nozzle? - Is the material suitable for use in food, medical, and pharmaceutical applications? The Rehiler Multi-Channel Jet is here to solve such concerns. Only Rehiler provides a catalog that includes impact force, noise levels, air consumption (energy-saving measures), and blow patterns!

• others

What is "one stone three birds"?! It refers to an air nozzle that, while being low noise (quiet) and reducing air consumption (energy-saving), also has a strong impact force (high functionality).

Air nozzle created by a long-established European manufacturer. Only Lechler provides information in their catalog on impact force, noise level, air consumption (energy-saving measures), and blow patterns! In various industries, air plays an extremely important role in processes such as drying, cooling, conveying, blowing off, cleaning, mixing, and opening packaging bags. There is no doubt that the use of air contributes to improving the economic efficiency of production processes, and its applications still have no limits. However, air production incurs significant costs, and during use, it generates high-frequency noise that adversely affects the hearing of workers. Therefore, air nozzles that consume as little air as possible and operate at low noise levels are required. Lechler will solve this problem by leveraging all of its accumulated nozzle technology, years of experience, and proven track record. ■□━━━━━━━━━━━━━━━━━・・・・・‥‥‥……… For details on each product, please download the catalog or feel free to contact us. ・・・・・‥‥‥………━━━━━━━━━━━━━━━━━■□ *Lechler GmbH is a German spray nozzle manufacturer.

• Conveyor

Best-selling Rehiller Co. air nozzle FL-600E's sister product, round type, offered in brass.

Rehira Multi-Channel Jet (Air Nozzle) Material: Brass Impact Force: 2.1N @ 0.2MPa Noise Level: 79 dB (A) @ 0.2MPa Flow Rate: 18N?/h @ 0.2MPa Maximum Operating Pressure: 1MPa Heat Resistance: 200℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single-port nozzle (copper pipe and crushed): approximately 12 dB (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise])

• others

Freely and easily fixed to the blow area in a pinpoint manner.

Multi-channel jet (flexible hose) Material: Polyacetal resin The flexible hose can be fixed to the desired blowing location freely and can be used over a wide temperature range from -30°C to 80°C. Dedicated flexible hose for Lechler's multi-channel jet (air nozzle) Can be connected with 1/4" male thread. *Lechler GmbH is a German spray nozzle manufacturer. *The current product has an orange tip and a dark blue body. *The thread standard on the piping connection side is PT. (The nozzle connection side is PF.)

• Conveyor

Fixed precisely at the blow area freely and easily.

Multi-channel jet (flexible hose) Material: Polyacetal resin The flexible hose can be fixed to the desired blowing area freely and can be used over a wide temperature range from -30°C to 80°C. Dedicated flexible hose for Lechler's multi-channel jet (air nozzle) Can be connected with 1/4" male thread. *Lechler GmbH is a German spray nozzle manufacturer. *The current product has an orange tip and a dark blue body. *The thread standard on the piping connection side is PT (the nozzle connection side is PF).

• Conveyor

Freely and precisely fixed to the blow area.

Multi-channel jet (flexible hose) Material: Polyacetal resin The flexible hose can be fixed to any desired location for blowing freely and can be used over a wide temperature range from -30°C to 80°C. Dedicated flexible hose for Lechler's multi-channel jet (air nozzle) Can be connected to 1/4" male thread. *Lechler GmbH is a German spray nozzle manufacturer. *The current product has an orange tip and a dark blue body. *The thread standard on the piping connection side is PT. (The nozzle connection side is PF.)

• Conveyor

Freely and precisely fixed to the blow area.

Material: Polyacetal resin The flexible hose can be fixed to the desired area for blowing freely and can be used in a wide temperature range from -30°C to 80°C. This product comes equipped with a multi-channel jet (air nozzle) FL-600E. *The current model has an orange tip on the flexible hose and a dark blue connector. *The thread standard on the piping connection side is PT (the nozzle connection side is PF).

• Conveyor

Freely and easily fixed to the blow area in a pinpoint manner.

Material: Polyacetal resin The flexible hose can be fixed to the desired area for blowing freely and can be used in a wide temperature range from -30°C to 80°C. This product comes equipped with the FL-600E multi-channel jet (air nozzle). * The current model has an orange tip on the flexible hose and a dark blue connector. * The thread standard on the piping connection side is PT (the nozzle connection side is PF).

• container

Freely and precisely fixed to the blow area.

Material: Polyacetal resin The flexible hose can be fixed to the desired area for blowing freely and can be used over a wide temperature range of -30°C to 80°C. This product comes equipped with a multi-channel jet (air nozzle) FL-600E. *The current model has an orange tip on the flexible hose and a dark blue connector. *The thread standard on the piping connection side is PT. (The nozzle connection side is PF.)

• Conveyor

Freely and precisely fixed to the blow area.

Material: Polyacetal resin The flexible hose can be fixed to the desired area for blowing freely and can be used over a wide temperature range of -30°C to 80°C. This product comes equipped with the multi-channel jet (air nozzle) FL-600H. * The current model has an orange tip on the flexible hose and a dark blue body. * The screw standard on the piping connection side is PT. (The nozzle connection side is PF.)

• Conveyor

Freely and easily fixed in a pinpoint manner at the blow area.

Material: Polyacetal resin The flexible hose can be fixed to the desired area for blowing freely and can be used in a wide temperature range from -30°C to 80°C. This product comes equipped with the FL-600H multi-channel jet (air nozzle). * The current model has an orange tip on the flexible hose and a dark blue connector. * The thread standard on the piping connection side is PT (the nozzle connection side is PF).

• Conveyor

Fixed precisely at the blow area freely and effortlessly.

Material: Polyacetal resin The flexible hose can be fixed to the desired area for blowing freely and can be used within a wide temperature range of -30°C to 80°C. This product comes equipped with the multi-channel jet (air nozzle) FL-600H. * The current model has an orange tip on the flexible hose and a dark blue body. * The screw standard on the piping connection side is PT. (The nozzle connection side is PF.)

• Conveyor

Freely and easily fixed to the blow area in a pinpoint manner.

Material: Polyacetal resin The flexible hose can be fixed to the desired blowing area and can be used in a wide temperature range from -30°C to 80°C. This product comes equipped with the FL-600R multi-channel jet (air nozzle). * The current model has an orange tip on the flexible hose and a dark blue connector. * The screw standard on the piping connection side is PT. (The nozzle connection side is PF.)

• Conveyor

Freely and precisely fixed to the blow area.

Material: Polyacetal resin The flexible hose can be fixed to the desired blowing area and can be used over a wide temperature range of -30°C to 80°C. This product comes equipped with the FL-600R multi-channel jet (air nozzle). * The current model has an orange tip on the flexible hose and a dark blue connector. * The screw standard on the piping connection side is PT (the nozzle connection side is PF).

• Conveyor

Freely and easily fixed in a pinpoint manner to the blow area.

Material: Polyacetal resin The flexible hose can be fixed to the desired blowing area and can be used in a wide temperature range from -30°C to 80°C. This product comes equipped with the multi-channel jet (air nozzle) FL-600R. * The current model has an orange tip on the flexible hose and a dark blue connector. * The screw standard on the piping connection side is PT. (The nozzle connection side is PF.)

• Conveyor

Freely and easily fixed in a pinpoint manner at the blow area.

Material: Polyacetal resin The flexible hose can be fixed to the desired blowing area and can be used in a wide temperature range from -30°C to 80°C. This product comes equipped with the FL-600R multi-channel jet (air nozzle). * The current model has an orange tip on the flexible hose and a dark blue connector. * The thread standard on the piping connection side is PT (the nozzle connection side is PF).

• Conveyor

Freely and easily fixed to the blow area in a pinpoint manner.

Material: Polyacetal resin The flexible hose can be fixed to the desired location for blowing freely and can be used over a wide temperature range of -30°C to 80°C. This product comes equipped with the multi-channel jet (air nozzle) FL-600M. * To attach the FL-600M to the flexible hose, a 1/8" PF female x 1/4" PF male fitting is required. * The current product has an orange tip on the flexible hose and a dark blue collar. * The thread standard on the piping connection side is PT. (The nozzle connection side is PF.)

• Conveyor

Freely and precisely fixed to the blow area.

Material: Polyacetal resin The flexible hose can be fixed to the desired area for blowing freely and can be used in a wide temperature range from -30°C to 80°C. This product comes equipped with the multi-channel jet (air nozzle) FL-600M. * To attach the FL-600M to the flexible hose, a 1/8" PF female x 1/4" PF male fitting is required. * The current model has an orange tip on the flexible hose and a dark blue body. * The thread standard on the piping connection side is PT (the nozzle connection side is PF).

• Conveyor

Freely and precisely fixed to the blow area.

Material: Polyacetal resin The flexible hose can be fixed to the desired blowing area and can be used in a wide temperature range from -30°C to 80°C. This product comes with the multi-channel jet (air nozzle) FL-600M pre-installed. * To attach the FL-600M to the flexible hose, a 1/8" PF female x 1/4" PF male fitting is required. * The current product has an orange tip on the flexible hose and a dark blue collar. * The thread standard on the piping connection side is PT. (The nozzle connection side is PF.)

• Conveyor

Cost reduction! A lineup of "low noise + energy-saving + high functionality" air nozzles approved by OSHA, FDA, and EC No. 1935/2004.

Only Reihler offers specifications for impact force, noise level, air consumption (energy-saving measures), and blow patterns in their catalog! In various industries, air plays an extremely important role in processes such as drying, cooling, conveying, blowing off, cleaning, mixing, and opening packaging bags. There is no doubt that the use of air contributes to improving the economic efficiency of production processes, and its applications still have no limits. However, air production incurs significant costs, and during use, it generates high-frequency noise that adversely affects workers' hearing. Therefore, air consumption must be minimized, and air nozzles are required to operate at low noise levels. Reihler will leverage all accumulated nozzle technology and years of experience and achievements to solve this problem. Additionally, we are always available for consultation for users who need solutions in special cases. Our products are also approved by OSHA, FDA, and (EC) no. 1935/2004. ■━━━━━━━━━━━━━━━━━ For detailed information on each product, please download the catalog or feel free to contact us. ━━━━━━━━━━━━━━━━━■

• Piping Equipment

We have received high praise from customers who have implemented our attendance management system, "KING OF TIME." Many reviews highlight not only the system itself but also our unique support system, which we are very pleased to hear. We would like to share a portion of these reviews with you! If you would like, please take a look at the PDF file, and feel free to reach out to us if you have any concerns.

Hotron, which manufactures and sells sensors, provides bed exit sensors for hospitals, nursing, and care facilities. Hotron offers easy-to-understand video guidance on how to use bed exit sensors wirelessly and how to set up device connections! ▼ Video Manual (YouTube) https://www.youtube.com/playlist?list=PLNVA4mTrZDqtJa6MfFRZQxwtfCSnAfxVy 【Bed Exit Sensors】 ○ Non-contact infrared sensor, simply place it - Pole-kun HB-H1 ○ Mat sensor, foldable thin mat - Mat-kun HB-UST ○ Body movement call - Ugo-kun HB-TV3 ○ Body movement call for wheelchairs - Ayumi-chan HB-WTV3 【Options】 ○ Nurse call linked wireless set - Wireless set (transmitter/receiver) HB-RS/HB-RJ ◎ For more information about the products, please contact us or download the catalog.

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, or management: Are you facing any challenges with current issues or selecting the right sensors for parking management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Vehicle Detection Sensor Basic Guide This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document presents the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

A technical presentation on "Efficient Water Level Situation Assessment Using Water Level AI" will be held at the 2025 China Construction Technology Development Exchange Meeting. October 22, 2025 (Wednesday)